diff --git a/README.md b/README.md index a28382547086db9acaadc007bdf735be5cca89ce..e3b2c93394a2464d567f37aeac10f5f0c5688c24 100644 --- a/README.md +++ b/README.md @@ -4,9 +4,9 @@ The MMKBLDC Project is my attempt at building a decent controller for Brushless Motors. BLDCs are excellent sources of mechatronic actuation: they're [power dense](https://jakeread.pages.cba.mit.edu/actuators/) and serve the motion control justice present in most state of the art robotics. However, controlling them is non-trivial, and requires the combination of some EE expertise, some control expertise, and some hardware know-how. - + - + ## Why diff --git a/circuit/README.md b/circuit/README.md index 2bce403760b568cb716bc56579de3195b2f0c591..a1cd7795e0b785f9f67ef952a16b980907486cae 100644 --- a/circuit/README.md +++ b/circuit/README.md @@ -18,18 +18,42 @@ This perhaps means I need to run that SPI cable with a differential driver, to b ## Notes - - label lights - - wants one lo-side debug pin! - - for resets etc, pull en to gnd on other side of switch! - - wants spi debug pins - - wants more gnd pins, for scope, gnd pins to be not beside 3v3 - - - might have to go to DRV8320 - newer, available - - CSD88548 is CSD88599 but more amps less volts, use these - - use RDT RTD for temp - 223-1563-1-ND - - phy RS422 and bring back buck - - do 24v fan 40mm on M3 Terminals! silk lands for heatsink 1.1" square + - body diode? https://www.youtube.com/watch?v=uqzOQGiwGnE or pwm sigs to freewheel? check deadtime? Fan - 1053-1210-ND - - 1053-1375-ND \ No newline at end of file + - 1053-1375-ND + +# BOM + +1nF +22nF +0.1uF +1uF +2.2uF +10uF + +2R2 +100R +470R +5K6 +10k +39K + +Resonator +10uH 0805 +LED Y,G,B +DIODE 0805 +RTD + +SHNT 2520 +PWRPAD +2x3 6PIN +RJ45 + +SLIDE SWITCH +RST BUTTON + +XMEGA +DRV8302 +FET \ No newline at end of file diff --git a/circuit/atkbldcdriver/atkbldcdriver.brd b/circuit/atkbldcdriver/atkbldcdriver.brd index d5170bb3210703680ae494babffa004833dd034d..c776ce41320be6db6c1f18e944e4544a6b60acce 100644 --- a/circuit/atkbldcdriver/atkbldcdriver.brd +++ b/circuit/atkbldcdriver/atkbldcdriver.brd @@ -6,7 +6,7 @@ <setting alwaysvectorfont="no"/> <setting verticaltext="up"/> </settings> -<grid distance="0.1" unitdist="mm" unit="mm" style="dots" multiple="1" display="yes" altdistance="5" altunitdist="mil" altunit="mil"/> +<grid distance="0.5" unitdist="mm" unit="mm" style="dots" multiple="1" display="yes" altdistance="5" altunitdist="mil" altunit="mil"/> <layers> <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/> <layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/> @@ -36,10 +36,10 @@ <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/> <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/> <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/> -<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/> -<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/> -<layer number="31" name="tCream" color="7" fill="4" visible="yes" active="yes"/> -<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/> +<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/> +<layer number="30" name="bStop" color="7" fill="6" visible="yes" active="yes"/> +<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/> +<layer number="32" name="bCream" color="7" fill="5" visible="yes" active="yes"/> <layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/> <layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/> <layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/> @@ -53,7 +53,7 @@ <layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/> <layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/> <layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/> -<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/> +<layer number="46" name="Milling" color="3" fill="1" visible="yes" active="yes"/> <layer number="47" name="Measures" color="7" fill="1" visible="yes" active="yes"/> <layer number="48" name="Document" color="7" fill="1" visible="no" active="yes"/> <layer number="49" name="Reference" color="7" fill="1" visible="no" active="yes"/> @@ -163,72 +163,61 @@ </layers> <board> <plain> -<text x="94.5" y="39.4" size="1.778" layer="21" font="vector" rot="R180">W</text> -<text x="94.2" y="42.6" size="1.778" layer="21" font="vector" rot="R180">V</text> -<text x="94.4" y="54.3" size="1.778" layer="21" font="vector" rot="R180">U</text> -<text x="45.479" y="54.562" size="1.016" layer="21" font="vector">SPI</text> -<text x="50.9" y="25.7" size="0.6096" layer="21" font="vector">UP0</text> -<text x="45.8" y="22.15" size="1.016" layer="21" font="vector">ATKP0</text> -<text x="54.82" y="25.003" size="0.6096" layer="21" font="vector">V-VCC</text> -<text x="53.12" y="29.043" size="0.6096" layer="21" font="vector">V-W</text> -<text x="53.27" y="31.61" size="0.6096" layer="21" font="vector">V-V</text> -<text x="53.32" y="34.123" size="0.6096" layer="21" font="vector">V-U</text> -<text x="53.37" y="39.18" size="0.6096" layer="21" font="vector">I-V</text> -<text x="53.37" y="36.763" size="0.6096" layer="21" font="vector">I-W</text> -<text x="57.17" y="41.67" size="0.6096" layer="21" font="vector">3V3</text> -<text x="57.17" y="44.26" size="0.6096" layer="21" font="vector">GND</text> -<text x="57.22" y="46.863" size="0.6096" layer="21" font="vector">HI3</text> -<text x="57.22" y="49.37" size="0.6096" layer="21" font="vector">HI2</text> -<text x="57.22" y="51.823" size="0.6096" layer="21" font="vector">HI1</text> -<text x="57.22" y="54.44" size="0.6096" layer="21" font="vector">FAULT</text> -<text x="51.4" y="14.578" size="1.016" layer="21" font="vector">atkbldcdriver v0.5</text> -<text x="57.7" y="55.742" size="1.016" layer="21" font="vector">< no - go ></text> -<text x="92.557" y="14.825" size="1.016" layer="21" font="vector" rot="R180">GND</text> -<text x="93.111" y="28.457" size="1.016" layer="21" font="vector" rot="R180">VCC</text> -<wire x1="32" y1="58.5" x2="35.5" y2="62" width="0.1524" layer="20" curve="-92.29061"/> -<rectangle x1="59.5" y1="10" x2="86.5" y2="22.5" layer="48"/> -<rectangle x1="86" y1="34.5" x2="92.5" y2="57.5" layer="48"/> -<wire x1="32" y1="58.5" x2="32" y2="16" width="0.1524" layer="20"/> -<wire x1="96.5" y1="12.5" x2="100.5" y2="16.5" width="0.1524" layer="20" curve="90"/> -<wire x1="100.5" y1="16.5" x2="100.5" y2="57.5" width="0.1524" layer="20"/> -<wire x1="100.5" y1="57.5" x2="96.5" y2="62" width="0.1524" layer="20" curve="90"/> -<wire x1="96.5" y1="62" x2="35.5" y2="62" width="0.1524" layer="20"/> -<rectangle x1="66.5" y1="34.5" x2="73" y2="57.5" layer="48"/> -<wire x1="35.5" y1="12.5" x2="96.5" y2="12.5" width="0.1524" layer="20"/> -<wire x1="66.5" y1="57.5" x2="66.5" y2="57.1" width="0.1016" layer="22"/> -<wire x1="66.5" y1="57.1" x2="66.9" y2="57.5" width="0.1016" layer="22"/> -<wire x1="66.9" y1="57.5" x2="66.5" y2="57.5" width="0.1016" layer="22"/> -<wire x1="73" y1="57.5" x2="73" y2="57.1" width="0.1016" layer="22"/> -<wire x1="73" y1="57.1" x2="72.6" y2="57.5" width="0.1016" layer="22"/> -<wire x1="72.6" y1="57.5" x2="73" y2="57.5" width="0.1016" layer="22"/> -<wire x1="66.5" y1="34.5" x2="66.5" y2="34.9" width="0.1016" layer="22"/> -<wire x1="66.5" y1="34.9" x2="66.9" y2="34.5" width="0.1016" layer="22"/> -<wire x1="66.9" y1="34.5" x2="66.5" y2="34.5" width="0.1016" layer="22"/> -<wire x1="73" y1="34.5" x2="73" y2="34.9" width="0.1016" layer="22"/> -<wire x1="73" y1="34.9" x2="72.6" y2="34.5" width="0.1016" layer="22"/> -<wire x1="72.6" y1="34.5" x2="73" y2="34.5" width="0.1016" layer="22"/> -<wire x1="86" y1="57.5" x2="86.4" y2="57.5" width="0.1016" layer="22"/> -<wire x1="86.4" y1="57.5" x2="86" y2="57.1" width="0.1016" layer="22"/> -<wire x1="86" y1="57.1" x2="86" y2="57.5" width="0.1016" layer="22"/> -<wire x1="92.5" y1="57.5" x2="92.5" y2="57.1" width="0.1016" layer="22"/> -<wire x1="92.5" y1="57.1" x2="92.1" y2="57.5" width="0.1016" layer="22"/> -<wire x1="92.1" y1="57.5" x2="92.5" y2="57.5" width="0.1016" layer="22"/> -<wire x1="92.5" y1="34.5" x2="92.5" y2="34.9" width="0.1016" layer="22"/> -<wire x1="92.5" y1="34.9" x2="92.1" y2="34.5" width="0.1016" layer="22"/> -<wire x1="92.1" y1="34.5" x2="92.5" y2="34.5" width="0.1016" layer="22"/> -<wire x1="86" y1="34.5" x2="86" y2="34.9" width="0.1016" layer="22"/> -<wire x1="86" y1="34.9" x2="86.4" y2="34.5" width="0.1016" layer="22"/> -<wire x1="86.4" y1="34.5" x2="86" y2="34.5" width="0.1016" layer="22"/> -<dimension x1="32" y1="62" x2="100.5" y2="62" x3="66.25" y3="64.5" textsize="0.6096" layer="48"/> -<dimension x1="32" y1="9.75" x2="32" y2="62" x3="28.6" y3="35.875" textsize="0.6096" layer="48"/> -<text x="60.822" y="56.4" size="1.016" layer="22" font="vector" rot="MR270">since systems tend to leave unstable equilibria -they cannot often be in them</text> -<wire x1="35.5" y1="12.5" x2="32" y2="16" width="0.1524" layer="20" curve="-90"/> -<dimension x1="32" y1="63.5" x2="100.5" y2="63.5" x3="66.25" y3="67.5" textsize="0.6096" textratio="10" layer="47"/> -<dimension x1="102.5" y1="62" x2="102.5" y2="12.5" x3="107" y3="37.25" textsize="0.6096" textratio="10" layer="47"/> -<dimension x1="35.5" y1="58.5" x2="76" y2="58.5" x3="55.75" y3="71" textsize="0.6096" textratio="10" layer="47"/> -<dimension x1="35.5" y1="58.5" x2="35.5" y2="16" x3="28" y3="37.25" textsize="0.6096" textratio="10" layer="47"/> -<dimension x1="35.5" y1="58.5" x2="32" y2="58.5" x3="33.75" y3="65.5" textsize="0.6096" textratio="10" layer="47"/> +<text x="74.5" y="11.5" size="1.778" layer="21" font="vector" rot="R180">W</text> +<text x="74.5" y="22.5" size="1.778" layer="21" font="vector" rot="R180">V</text> +<text x="74.5" y="37" size="1.778" layer="21" font="vector" rot="R180">U</text> +<text x="13.479" y="45.562" size="1.016" layer="21" font="vector">SPI</text> +<text x="24.5" y="2.5" size="1.016" layer="21" font="vector" rot="R90">ATKP0</text> +<text x="22.82" y="16.003" size="0.6096" layer="21" font="vector">V-VCC</text> +<text x="21.12" y="20.043" size="0.6096" layer="21" font="vector">V-W</text> +<text x="21.27" y="22.61" size="0.6096" layer="21" font="vector">V-V</text> +<text x="21.32" y="25.123" size="0.6096" layer="21" font="vector">V-U</text> +<text x="21.37" y="30.18" size="0.6096" layer="21" font="vector">I-V</text> +<text x="21.37" y="27.763" size="0.6096" layer="21" font="vector">I-W</text> +<text x="25.17" y="32.67" size="0.6096" layer="21" font="vector">3V3</text> +<text x="25.17" y="35.26" size="0.6096" layer="21" font="vector">LO3</text> +<text x="25.22" y="37.863" size="0.6096" layer="21" font="vector">HI3</text> +<text x="25.22" y="40.37" size="0.6096" layer="21" font="vector">HI2</text> +<text x="25.22" y="42.823" size="0.6096" layer="21" font="vector">HI1</text> +<text x="25.22" y="45.44" size="0.6096" layer="21" font="vector">FAULT</text> +<text x="33.5" y="22" size="1.016" layer="21" font="vector">atkbldcdriver v0.6</text> +<text x="33.5" y="48" size="1.016" layer="21" font="vector">< no - go ></text> +<text x="49.5" y="9" size="1.27" layer="21" font="vector" rot="R180">GND</text> +<text x="48.5" y="46" size="1.27" layer="21" font="vector" rot="R180">VCC</text> +<wire x1="0" y1="51" x2="3" y2="54" width="0.1524" layer="20" curve="-92.29061"/> +<wire x1="0" y1="51" x2="0" y2="3" width="0.1524" layer="20"/> +<wire x1="79" y1="0" x2="83" y2="4" width="0.1524" layer="20" curve="90"/> +<wire x1="83" y1="4" x2="83" y2="51" width="0.1524" layer="20"/> +<wire x1="83" y1="51" x2="80" y2="54" width="0.1524" layer="20" curve="90"/> +<wire x1="80" y1="54" x2="3" y2="54" width="0.1524" layer="20"/> +<wire x1="3" y1="0" x2="79" y2="0" width="0.1524" layer="20"/> +<text x="5.222" y="43.6" size="1.016" layer="22" font="vector" rot="MR270">He said, 'no, I mean God like physics'</text> +<wire x1="3" y1="0" x2="0" y2="3" width="0.1524" layer="20" curve="-90"/> +<dimension x1="87" y1="43" x2="87" y2="3" x3="98" y3="23" textsize="0.6096" textratio="10" layer="48"/> +<dimension x1="80" y1="-4" x2="40" y2="-4" x3="60" y3="-13" textsize="0.6096" textratio="10" layer="48"/> +<dimension x1="48" y1="-2.5" x2="60" y2="-2.5" x3="54" y3="-3.5" textsize="0.6096" textratio="10" layer="48"/> +<text x="0.5" y="46.5" size="1.016" layer="21" font="vector">pwr</text> +<text x="0.5" y="43.5" size="1.016" layer="21" font="vector">clk</text> +<text x="0.5" y="40.5" size="1.016" layer="21" font="vector">err</text> +<wire x1="35.25" y1="47.75" x2="35.25" y2="46.5" width="0.1524" layer="22"/> +<wire x1="35.25" y1="46.5" x2="36.5" y2="47.75" width="0.1524" layer="22"/> +<wire x1="36.5" y1="47.75" x2="35.25" y2="47.75" width="0.1524" layer="22"/> +<wire x1="76.75" y1="47.75" x2="76.75" y2="46.5" width="0.1524" layer="22"/> +<wire x1="76.75" y1="46.5" x2="75.5" y2="47.75" width="0.1524" layer="22"/> +<wire x1="75.5" y1="47.75" x2="76.75" y2="47.75" width="0.1524" layer="22"/> +<wire x1="76.75" y1="6.25" x2="76.75" y2="7.5" width="0.1524" layer="22"/> +<wire x1="76.75" y1="7.5" x2="75.5" y2="6.25" width="0.1524" layer="22"/> +<wire x1="75.5" y1="6.25" x2="76.75" y2="6.25" width="0.1524" layer="22"/> +<wire x1="35.25" y1="6.25" x2="35.25" y2="7.5" width="0.1524" layer="22"/> +<wire x1="35.25" y1="7.5" x2="36.5" y2="6.25" width="0.1524" layer="22"/> +<wire x1="36.5" y1="6.25" x2="35.25" y2="6.25" width="0.1524" layer="22"/> +<text x="25.22" y="47.94" size="0.6096" layer="21" font="vector">RTD</text> +<dimension x1="0" y1="61.5" x2="83" y2="61.5" x3="41.5" y3="68" textsize="0.6096" textratio="10" layer="47"/> +<dimension x1="91" y1="54" x2="91" y2="0" x3="95" y3="27" textsize="0.6096" textratio="10" layer="47"/> +<dimension x1="80" y1="61.5" x2="3" y2="61.5" x3="41.5" y3="63.5" textsize="0.6096" textratio="10" layer="47"/> +<dimension x1="-3" y1="51" x2="-3" y2="3" x3="-8" y3="27" textsize="0.6096" textratio="10" layer="47"/> +<rectangle x1="54" y1="27.5" x2="75" y2="48.5" layer="48"/> +<rectangle x1="54" y1="6" x2="75" y2="27" layer="48"/> </plain> <libraries> <library name="fab"> @@ -363,7 +352,7 @@ they cannot often be in them</text> </library> <library name="power"> <packages> -<package name="PWRPAD_M3-PEM-MOUNT"> +<package name="PWRPAD_M3_STANDOFF"> <pad name="P$1" x="0" y="0" drill="4.4" diameter="7" thermals="no"/> <polygon width="0.127" layer="31"> <vertex x="-0.6" y="3.6"/> @@ -475,7 +464,7 @@ they cannot often be in them</text> <smd name="P$54" x="3.74999375" y="5.7499875" dx="1.5494" dy="0.2794" layer="1"/> <smd name="P$55" x="3.74999375" y="6.2499875" dx="1.5494" dy="0.2794" layer="1"/> <smd name="P$56" x="3.74999375" y="6.749984375" dx="1.5494" dy="0.2794" layer="1"/> -<smd name="P$57" x="0" y="0" dx="3.5814" dy="6.35" layer="1"/> +<smd name="P$57" x="0" y="0" dx="3.5814" dy="6.35" layer="1" thermals="no"/> <wire x1="-3.185478125" y1="7.08869375" x2="-3.185478125" y2="-7.088696875" width="0.1524" layer="21"/> <wire x1="-3.185478125" y1="-7.088696875" x2="3.185478125" y2="-7.088696875" width="0.127" layer="21"/> <wire x1="3.185478125" y1="-7.088696875" x2="3.185478125" y2="7.08869375" width="0.127" layer="21"/> @@ -498,35 +487,162 @@ they cannot often be in them</text> <wire x1="-1.4" y1="1.3" x2="-2.4" y2="1.3" width="0.2032" layer="1"/> <wire x1="1.4" y1="1.3" x2="2.2" y2="1.3" width="0.2032" layer="1"/> </package> -<package name="SON-5X6"> -<smd name="VIN" x="0" y="0" dx="3.3" dy="5.4" layer="1" cream="no"/> -<smd name="M1" x="-2.25" y="3.05" dx="0.5" dy="0.35" layer="1"/> -<smd name="M2" x="2.25" y="3.05" dx="0.5" dy="0.35" layer="1"/> -<smd name="M3" x="-2.25" y="-3.05" dx="0.5" dy="0.35" layer="1"/> -<smd name="M4" x="2.25" y="-3.05" dx="0.5" dy="0.35" layer="1"/> -<wire x1="-2.5" y1="3" x2="2.5" y2="3" width="0.127" layer="51"/> -<wire x1="2.5" y1="3" x2="2.5" y2="-3" width="0.127" layer="51"/> -<wire x1="2.5" y1="-3" x2="-2.5" y2="-3" width="0.127" layer="51"/> -<wire x1="-2.5" y1="-3" x2="-2.5" y2="3" width="0.127" layer="51"/> -<circle x="-1.7" y="3.3" radius="0.1" width="0.127" layer="21"/> -<smd name="GH" x="-2.5" y="2.5" dx="1" dy="0.25" layer="1"/> -<smd name="SH" x="-2.5" y="2" dx="1" dy="0.25" layer="1"/> -<smd name="VSW" x="-2.5" y="-0.5" dx="1" dy="4.3" layer="1"/> -<smd name="GL" x="2.5" y="2.5" dx="1" dy="0.25" layer="1"/> -<smd name="NC" x="2.5" y="2" dx="1" dy="0.25" layer="1"/> -<smd name="PGND" x="2.5" y="-0.5" dx="1" dy="4.3" layer="1"/> -<rectangle x1="-1.4" y1="0.2" x2="-0.2" y2="2.5" layer="31"/> -<rectangle x1="0.2" y1="0.2" x2="1.4" y2="2.5" layer="31"/> -<rectangle x1="-1.4" y1="-2.5" x2="-0.2" y2="-0.2" layer="31"/> -<rectangle x1="0.2" y1="-2.5" x2="1.4" y2="-0.2" layer="31"/> -</package> <package name="BFC-8MM"> -<pad name="P$1" x="-1.75" y="0" drill="1" diameter="1.9304"/> -<pad name="P$2" x="1.75" y="0" drill="1" diameter="1.9304"/> -<circle x="0" y="0" radius="4" width="0.127" layer="21"/> +<pad name="P$1" x="-2" y="0" drill="1" diameter="1.9304"/> +<pad name="P$2" x="2" y="0" drill="1" diameter="1.9304"/> +<circle x="0" y="0" radius="6" width="0.127" layer="21"/> <text x="-1" y="2" size="0.4064" layer="25">>NAME</text> <text x="-1" y="-2" size="0.4064" layer="27">>VALUE</text> </package> +<package name="DSOP-ADVANCE"> +<smd name="P$1" x="-1.905" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$2" x="-0.635" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$3" x="0.635" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$4" x="1.905" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$5" x="0" y="0.95" dx="5.5" dy="4.7" layer="1"/> +<circle x="-2.7" y="-3.8" radius="0.22360625" width="0.127" layer="21"/> +<wire x1="-2.5" y1="3" x2="2.5" y2="3" width="0.127" layer="48"/> +<wire x1="2.5" y1="3" x2="2.5" y2="-3" width="0.127" layer="48"/> +<wire x1="2.5" y1="-3" x2="-2.5" y2="-3" width="0.127" layer="48"/> +<wire x1="-2.5" y1="-3" x2="-2.5" y2="3" width="0.127" layer="48"/> +</package> +<package name="QFN16-3X3-TI-RTE"> +<description>3x3 mm</description> +<wire x1="-1.5" y1="1.5" x2="1.5" y2="1.5" width="0.1016" layer="51"/> +<wire x1="1.5" y1="1.5" x2="1.5" y2="-1.5" width="0.1016" layer="51"/> +<wire x1="1.5" y1="-1.5" x2="-1.5" y2="-1.5" width="0.1016" layer="51"/> +<wire x1="-1.5" y1="-1.5" x2="-1.5" y2="1.5" width="0.1016" layer="51"/> +<wire x1="1.5" y1="1.5" x2="1.5" y2="1.025" width="0.1016" layer="21"/> +<wire x1="1.025" y1="1.5" x2="1.5" y2="1.5" width="0.1016" layer="21"/> +<wire x1="-1.5" y1="-1.5" x2="-1.5" y2="-1.025" width="0.1016" layer="21"/> +<wire x1="-1.025" y1="-1.5" x2="-1.5" y2="-1.5" width="0.1016" layer="21"/> +<wire x1="1.5" y1="-1.5" x2="1.025" y2="-1.5" width="0.1016" layer="21"/> +<wire x1="1.5" y1="-1.025" x2="1.5" y2="-1.5" width="0.1016" layer="21"/> +<circle x="-1.2" y="0.75" radius="0.125" width="0" layer="31"/> +<circle x="-1.2" y="0.75" radius="0.2" width="0" layer="29"/> +<circle x="-1.2" y="0.25" radius="0.125" width="0" layer="31"/> +<circle x="-1.2" y="0.25" radius="0.2" width="0" layer="29"/> +<circle x="-1.2" y="-0.25" radius="0.125" width="0" layer="31"/> +<circle x="-1.2" y="-0.75" radius="0.125" width="0" layer="31"/> +<circle x="-0.75" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="-0.25" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="0.25" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="0.75" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="-0.75" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="-0.25" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="0.25" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="0.75" radius="0.125" width="0" layer="31"/> +<circle x="0.75" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="0.25" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="-0.25" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="-0.75" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="0" y="0" radius="0.15" width="0.01" layer="49"/> +<circle x="0.5" y="0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="0.5" y="-0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="-0.5" y="-0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="-0.5" y="0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="-1.2" y="-0.25" radius="0.2" width="0" layer="29"/> +<circle x="-1.2" y="-0.75" radius="0.2" width="0" layer="29"/> +<circle x="-0.75" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="-0.25" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="0.25" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="0.75" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="-0.75" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="-0.25" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="0.25" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="0.75" radius="0.2" width="0" layer="29"/> +<circle x="0.75" y="1.2" radius="0.2" width="0" layer="29"/> +<circle x="0.25" y="1.2" radius="0.2" width="0" layer="29"/> +<circle x="-0.25" y="1.2" radius="0.2" width="0" layer="29"/> +<circle x="-0.75" y="1.2" radius="0.2" width="0" layer="29"/> +<smd name="TH" x="0" y="0" dx="1.7" dy="1.7" layer="1" stop="no" cream="no"/> +<smd name="1" x="-1.475" y="0.75" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="2" x="-1.475" y="0.25" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="3" x="-1.475" y="-0.25" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="4" x="-1.475" y="-0.75" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="5" x="-0.75" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="6" x="-0.25" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="7" x="0.25" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="8" x="0.75" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="9" x="1.475" y="-0.75" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="10" x="1.475" y="-0.25" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="11" x="1.475" y="0.25" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="12" x="1.475" y="0.75" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="13" x="0.75" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<smd name="14" x="0.25" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<smd name="15" x="-0.25" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<smd name="16" x="-0.75" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<text x="-2" y="2" size="1.27" layer="25">>NAME</text> +<text x="-2" y="-3.5" size="1.27" layer="27">>VALUE</text> +<rectangle x1="-0.875" y1="-0.875" x2="0.875" y2="0.875" layer="29"/> +<rectangle x1="-0.8" y1="0.1" x2="-0.1" y2="0.8" layer="31" rot="R90"/> +<rectangle x1="-1.9" y1="0.55" x2="-1.2" y2="0.95" layer="29"/> +<rectangle x1="-1.85" y1="0.625" x2="-1.2" y2="0.875" layer="31"/> +<rectangle x1="-1.9" y1="0.05" x2="-1.2" y2="0.45" layer="29"/> +<rectangle x1="-1.85" y1="0.125" x2="-1.2" y2="0.375" layer="31"/> +<rectangle x1="-1.85" y1="-0.375" x2="-1.2" y2="-0.125" layer="31"/> +<rectangle x1="-1.85" y1="-0.875" x2="-1.2" y2="-0.625" layer="31"/> +<rectangle x1="-1.075" y1="-1.65" x2="-0.425" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="-0.575" y1="-1.65" x2="0.075" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="-0.075" y1="-1.65" x2="0.575" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="0.425" y1="-1.65" x2="1.075" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="1.2" y1="-0.875" x2="1.85" y2="-0.625" layer="31" rot="R180"/> +<rectangle x1="1.2" y1="-0.375" x2="1.85" y2="-0.125" layer="31" rot="R180"/> +<rectangle x1="1.2" y1="0.125" x2="1.85" y2="0.375" layer="31" rot="R180"/> +<rectangle x1="1.2" y1="0.625" x2="1.85" y2="0.875" layer="31" rot="R180"/> +<rectangle x1="0.425" y1="1.4" x2="1.075" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-0.075" y1="1.4" x2="0.575" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-0.575" y1="1.4" x2="0.075" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-1.075" y1="1.4" x2="-0.425" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-0.8" y1="-0.8" x2="-0.1" y2="-0.1" layer="31" rot="R180"/> +<rectangle x1="0.1" y1="-0.8" x2="0.8" y2="-0.1" layer="31" rot="R270"/> +<rectangle x1="0.1" y1="0.1" x2="0.8" y2="0.8" layer="31"/> +<rectangle x1="-1.9" y1="-0.45" x2="-1.2" y2="-0.05" layer="29"/> +<rectangle x1="-1.9" y1="-0.95" x2="-1.2" y2="-0.55" layer="29"/> +<rectangle x1="-1.1" y1="-1.75" x2="-0.4" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="-0.6" y1="-1.75" x2="0.1" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="-0.1" y1="-1.75" x2="0.6" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="0.4" y1="-1.75" x2="1.1" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="1.2" y1="-0.95" x2="1.9" y2="-0.55" layer="29" rot="R180"/> +<rectangle x1="1.2" y1="-0.45" x2="1.9" y2="-0.05" layer="29" rot="R180"/> +<rectangle x1="1.2" y1="0.05" x2="1.9" y2="0.45" layer="29" rot="R180"/> +<rectangle x1="1.2" y1="0.55" x2="1.9" y2="0.95" layer="29" rot="R180"/> +<rectangle x1="0.4" y1="1.35" x2="1.1" y2="1.75" layer="29" rot="R270"/> +<rectangle x1="-0.1" y1="1.35" x2="0.6" y2="1.75" layer="29" rot="R270"/> +<rectangle x1="-0.6" y1="1.35" x2="0.1" y2="1.75" layer="29" rot="R270"/> +<rectangle x1="-1.1" y1="1.35" x2="-0.4" y2="1.75" layer="29" rot="R270"/> +<wire x1="-1.5" y1="1.02" x2="-1.03" y2="1.5" width="0.127" layer="21"/> +<circle x="-2.06" y="1.24" radius="0.15" width="0.127" layer="21"/> +</package> +<package name="NRS5020T4R7MMGJ"> +<smd name="1" x="0" y="1.65" dx="4.9" dy="1.5" layer="1"/> +<smd name="2" x="0" y="-1.65" dx="4.9" dy="1.5" layer="1"/> +<text x="-3" y="2.8" size="1.27" layer="25">>NAME</text> +<text x="-3.1" y="-4" size="1.27" layer="27">>VALUE</text> +</package> +<package name="SOT23-5"> +<description><b>Small Outline Transistor</b>, 5 lead</description> +<wire x1="-1.544" y1="0.713" x2="1.544" y2="0.713" width="0.1524" layer="21"/> +<wire x1="1.544" y1="0.713" x2="1.544" y2="-0.712" width="0.1524" layer="21"/> +<wire x1="1.544" y1="-0.712" x2="-1.544" y2="-0.712" width="0.1524" layer="21"/> +<wire x1="-1.544" y1="-0.712" x2="-1.544" y2="0.713" width="0.1524" layer="21"/> +<smd name="5" x="-0.95" y="1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="4" x="0.95" y="1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="1" x="-0.95" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="2" x="0" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="3" x="0.95" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/> +<text x="-1.778" y="-1.778" size="1.27" layer="25" ratio="10" rot="R90">>NAME</text> +<text x="3.048" y="-1.778" size="1.27" layer="27" ratio="10" rot="R90">>VALUE</text> +<rectangle x1="-1.1875" y1="0.7126" x2="-0.7125" y2="1.5439" layer="51"/> +<rectangle x1="0.7125" y1="0.7126" x2="1.1875" y2="1.5439" layer="51"/> +<rectangle x1="-1.1875" y1="-1.5437" x2="-0.7125" y2="-0.7124" layer="51"/> +<rectangle x1="-0.2375" y1="-1.5437" x2="0.2375" y2="-0.7124" layer="51"/> +<rectangle x1="0.7125" y1="-1.5437" x2="1.1875" y2="-0.7124" layer="51"/> +</package> +<package name="SL-LINK"> +<smd name="1" x="-0.1" y="0" dx="0.3" dy="0.3" layer="1"/> +<smd name="2" x="0.1" y="0" dx="0.3" dy="0.3" layer="1"/> +</package> </packages> </library> <library name="SparkFun-Connectors"> @@ -619,51 +735,38 @@ You are welcome to use this library for commercial purposes. For attribution, we <text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> <text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> </package> +<package name="1X02_LONGPADS"> +<description><h3>Plated Through Hole - Long Pads without Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/> +<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/> +<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.397" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X01_NO_SILK"> +<description><h3>Plated Through Hole - No Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +</package> </packages> </library> <library name="connector"> <packages> -<package name="JRTOMBSTONE"> -<wire x1="-1.1" y1="-1" x2="-1.1" y2="0.7" width="0.127" layer="21"/> -<wire x1="-1.1" y1="0.7" x2="1" y2="0.7" width="0.127" layer="21" curve="-180"/> -<wire x1="1" y1="0.7" x2="1" y2="-1" width="0.127" layer="21"/> -<wire x1="1" y1="-1" x2="-1.1" y2="-1" width="0.127" layer="21"/> -<wire x1="-0.8" y1="-0.5" x2="-0.6" y2="-0.5" width="0.127" layer="21"/> -<wire x1="-0.6" y1="-0.5" x2="-0.3" y2="-0.2" width="0.127" layer="21" curve="90"/> -<wire x1="-0.3" y1="-0.2" x2="-0.3" y2="0.7" width="0.127" layer="21"/> -<wire x1="-0.3" y1="0.7" x2="-0.8" y2="0.7" width="0.127" layer="21"/> -<wire x1="-0.3" y1="0.7" x2="0.1" y2="0.7" width="0.127" layer="21"/> -<wire x1="0.1" y1="0.7" x2="0.1" y2="0.1" width="0.127" layer="21"/> -<wire x1="0.1" y1="0.1" x2="0.1" y2="-0.5" width="0.127" layer="21"/> -<wire x1="0.1" y1="0.7" x2="0.4" y2="0.7" width="0.127" layer="21"/> -<wire x1="0.4" y1="0.7" x2="0.4" y2="0.1" width="0.127" layer="21" curve="-180"/> -<wire x1="0.4" y1="0.1" x2="0.7" y2="-0.5" width="0.127" layer="21"/> -<wire x1="0.4" y1="0.1" x2="0.1" y2="0.1" width="0.127" layer="21"/> -</package> -<package name="RJ45-LED-RJE7318800XXX"> -<hole x="-5.74" y="0" drill="1.8"/> -<hole x="5.74" y="0" drill="1.8"/> -<pad name="SHDL1" x="-8" y="-4.35" drill="2" shape="square" rot="R180"/> -<pad name="SHDL2" x="8" y="-4.35" drill="2" shape="square"/> -<wire x1="8" y1="-6.5" x2="-8" y2="-6.5" width="0.1524" layer="51"/> -<wire x1="-8" y1="-6.5" x2="-8" y2="-9" width="0.1524" layer="51"/> -<wire x1="-8" y1="-9" x2="8" y2="-9" width="0.1524" layer="51"/> -<wire x1="8" y1="-9" x2="8" y2="6" width="0.1524" layer="51"/> -<wire x1="8" y1="6" x2="-8" y2="6" width="0.1524" layer="51"/> -<wire x1="-8" y1="6" x2="-8" y2="-6.5" width="0.1524" layer="51"/> -<pad name="P$1" x="-3.57" y="0.38" drill="0.9"/> -<pad name="P$2" x="-2.55" y="-1.45" drill="0.9"/> -<pad name="P$3" x="-1.53" y="0.38" drill="0.9"/> -<pad name="P$5" x="0.51" y="0.38" drill="0.9"/> -<pad name="P$7" x="2.55" y="0.38" drill="0.9"/> -<pad name="P$4" x="-0.51" y="-1.45" drill="0.9"/> -<pad name="P$6" x="1.53" y="-1.45" drill="0.9"/> -<pad name="P$8" x="3.57" y="-1.45" drill="0.9"/> -<pad name="YLWP" x="-7.01" y="3.6" drill="1.1"/> -<pad name="GRNN" x="7.01" y="3.6" drill="1.1"/> -<pad name="GRNP" x="4.47" y="3.6" drill="1.1"/> -<pad name="YLWN" x="-4.47" y="3.6" drill="1.1"/> -</package> <package name="FIDUCIAL_1MM"> <smd name="1" x="0" y="0" dx="1" dy="1" layer="1" roundness="100" stop="no" cream="no"/> <polygon width="0.127" layer="29"> @@ -680,6 +783,29 @@ You are welcome to use this library for commercial purposes. For attribution, we </polygon> <circle x="0" y="0" radius="0.4953" width="0" layer="51"/> </package> +<package name="RJ45-LED-RJHSE-5381-UPTAB"> +<hole x="-6.35" y="-2.54" drill="3.2512"/> +<hole x="6.35" y="-2.54" drill="3.2512"/> +<pad name="SHDL1" x="-8.128" y="0.889" drill="1.5748" shape="square" rot="R180"/> +<pad name="SHDL2" x="8.128" y="0.889" drill="1.5748" shape="square"/> +<wire x1="-8.254" y1="-6.5" x2="-8.255" y2="-8.509" width="0.1524" layer="51"/> +<wire x1="-8.255" y1="-8.509" x2="8.255" y2="-8.509" width="0.1524" layer="51"/> +<wire x1="8.255" y1="-8.509" x2="8.255" y2="7.366" width="0.1524" layer="51"/> +<wire x1="8.255" y1="7.366" x2="-8.255" y2="7.366" width="0.1524" layer="51"/> +<wire x1="-8.255" y1="7.366" x2="-8.254" y2="-6.5" width="0.1524" layer="51"/> +<pad name="P$1" x="3.556" y="0" drill="0.9"/> +<pad name="P$2" x="2.54" y="1.778" drill="0.9"/> +<pad name="P$3" x="1.524" y="0" drill="0.9"/> +<pad name="P$5" x="-0.508" y="0" drill="0.9"/> +<pad name="P$7" x="-2.54" y="0" drill="0.9"/> +<pad name="P$4" x="0.508" y="1.778" drill="0.9"/> +<pad name="P$6" x="-1.524" y="1.778" drill="0.9"/> +<pad name="P$8" x="-3.556" y="1.778" drill="0.9"/> +<pad name="YLWP" x="-6.858" y="6.604" drill="0.889"/> +<pad name="GRNN" x="6.858" y="6.604" drill="0.889"/> +<pad name="GRNP" x="4.572" y="6.604" drill="0.889"/> +<pad name="YLWN" x="-4.572" y="6.604" drill="0.889"/> +</package> </packages> </library> <library name="lights"> @@ -872,6 +998,104 @@ You are welcome to use this library for commercial purposes. For attribution, we </package> </packages> </library> +<library name="sensor"> +<packages> +<package name="SOT23"> +<description><b>SOT 23</b></description> +<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/> +<wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/> +<wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/> +<wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/> +<wire x1="-1.4224" y1="-0.1524" x2="-1.4224" y2="0.6604" width="0.1524" layer="21"/> +<wire x1="-1.4224" y1="0.6604" x2="-0.8636" y2="0.6604" width="0.1524" layer="21"/> +<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.1524" width="0.1524" layer="21"/> +<wire x1="0.8636" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="21"/> +<smd name="3" x="0" y="1.1" dx="0.762" dy="1.016" layer="1"/> +<smd name="2" x="0.95" y="-1.1" dx="0.762" dy="1.016" layer="1"/> +<smd name="1" x="-0.95" y="-1.1" dx="0.762" dy="1.016" layer="1"/> +<text x="-1.905" y="1.905" size="1.27" layer="25">>NAME</text> +<text x="-1.905" y="-3.175" size="1.27" layer="27">>VALUE</text> +<rectangle x1="-0.2286" y1="0.7112" x2="0.2286" y2="1.2954" layer="51"/> +<rectangle x1="0.7112" y1="-1.2954" x2="1.1684" y2="-0.7112" layer="51"/> +<rectangle x1="-1.1684" y1="-1.2954" x2="-0.7112" y2="-0.7112" layer="51"/> +</package> +</packages> +</library> +<library name="comm"> +<packages> +<package name="TSSOP16"> +<description><b>TSOP16</b><p> +thin small outline package</description> +<wire x1="3.1" y1="-2.4" x2="-3" y2="-2.4" width="0.2032" layer="51"/> +<wire x1="-3" y1="2.6" x2="3.1" y2="2.6" width="0.2032" layer="51"/> +<wire x1="3.1" y1="-2.4" x2="3.1" y2="2.6" width="0.2032" layer="51"/> +<wire x1="-3" y1="2.6" x2="-2.8" y2="2.6" width="0.2032" layer="21"/> +<wire x1="-3" y1="2.6" x2="-3" y2="0.5" width="0.2032" layer="21"/> +<wire x1="-3" y1="-0.5" x2="-3" y2="-2.4" width="0.2032" layer="21"/> +<wire x1="-3" y1="-2.4" x2="-2.8" y2="-2.4" width="0.2032" layer="21"/> +<wire x1="2.9" y1="-2.4" x2="3.1" y2="-2.4" width="0.2032" layer="21"/> +<wire x1="3.1" y1="-2.4" x2="3.1" y2="2.6" width="0.2032" layer="21"/> +<wire x1="3.1" y1="2.6" x2="2.9" y2="2.6" width="0.2032" layer="21"/> +<wire x1="-3" y1="0.5" x2="-3" y2="-0.5" width="0.2032" layer="21" curve="-180"/> +<smd name="1" x="-2.225" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="2" x="-1.575" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="3" x="-0.925" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="4" x="-0.275" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="5" x="0.375" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="6" x="1.025" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="7" x="1.675" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="8" x="2.325" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="9" x="2.325" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="10" x="1.675" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="11" x="1.025" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="12" x="0.375" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="13" x="-0.275" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="14" x="-0.925" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="15" x="-1.575" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="16" x="-2.225" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<rectangle x1="-2.425" y1="-3.3501" x2="-2.0249" y2="-2.5299" layer="51"/> +<rectangle x1="-1.775" y1="-3.3501" x2="-1.3749" y2="-2.5299" layer="51"/> +<rectangle x1="-1.125" y1="-3.3501" x2="-0.725" y2="-2.5299" layer="51"/> +<rectangle x1="-0.475" y1="-3.3501" x2="-0.075" y2="-2.5299" layer="51"/> +<rectangle x1="0.175" y1="-3.3501" x2="0.575" y2="-2.5299" layer="51"/> +<rectangle x1="0.825" y1="-3.3501" x2="1.225" y2="-2.5299" layer="51"/> +<rectangle x1="1.4749" y1="-3.3501" x2="1.875" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="-3.3501" x2="2.525" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="2.7299" x2="2.525" y2="3.5501" layer="51"/> +<rectangle x1="1.4749" y1="2.7299" x2="1.875" y2="3.5501" layer="51"/> +<rectangle x1="0.825" y1="2.7299" x2="1.225" y2="3.5501" layer="51"/> +<rectangle x1="0.175" y1="2.7299" x2="0.575" y2="3.5501" layer="51"/> +<rectangle x1="-0.475" y1="2.7299" x2="-0.075" y2="3.5501" layer="51"/> +<rectangle x1="-1.125" y1="2.7299" x2="-0.725" y2="3.5501" layer="51"/> +<rectangle x1="-1.775" y1="2.7299" x2="-1.3749" y2="3.5501" layer="51"/> +<rectangle x1="-2.425" y1="2.7299" x2="-2.0249" y2="3.5501" layer="51"/> +<rectangle x1="-2.425" y1="-3.3501" x2="-2.0249" y2="-2.5299" layer="51"/> +<rectangle x1="-1.775" y1="-3.3501" x2="-1.3749" y2="-2.5299" layer="51"/> +<rectangle x1="-1.125" y1="-3.3501" x2="-0.725" y2="-2.5299" layer="51"/> +<rectangle x1="-0.475" y1="-3.3501" x2="-0.075" y2="-2.5299" layer="51"/> +<rectangle x1="0.175" y1="-3.3501" x2="0.575" y2="-2.5299" layer="51"/> +<rectangle x1="0.825" y1="-3.3501" x2="1.225" y2="-2.5299" layer="51"/> +<rectangle x1="1.4749" y1="-3.3501" x2="1.875" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="-3.3501" x2="2.525" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="2.7299" x2="2.525" y2="3.5501" layer="51"/> +<rectangle x1="1.4749" y1="2.7299" x2="1.875" y2="3.5501" layer="51"/> +<rectangle x1="0.825" y1="2.7299" x2="1.225" y2="3.5501" layer="51"/> +<rectangle x1="0.175" y1="2.7299" x2="0.575" y2="3.5501" layer="51"/> +<rectangle x1="-0.475" y1="2.7299" x2="-0.075" y2="3.5501" layer="51"/> +<rectangle x1="-1.125" y1="2.7299" x2="-0.725" y2="3.5501" layer="51"/> +<rectangle x1="-1.775" y1="2.7299" x2="-1.3749" y2="3.5501" layer="51"/> +<rectangle x1="-2.425" y1="2.7299" x2="-2.0249" y2="3.5501" layer="51"/> +<text x="-3.33375" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">>NAME</text> +<text x="3.96875" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="bottom-center">>VALUE</text> +<polygon width="0.127" layer="21"> +<vertex x="-3.65125" y="-3.175" curve="-90"/> +<vertex x="-3.175" y="-2.69875" curve="-90"/> +<vertex x="-2.69875" y="-3.175" curve="-90"/> +<vertex x="-3.175" y="-3.65125" curve="-90"/> +</polygon> +</package> +</packages> +</library> </libraries> <attributes> </attributes> @@ -1065,498 +1289,514 @@ design rules under a new name.</description> </pass> </autorouter> <elements> -<element name="R24" library="borkedlabs-passives" package="0805" value="2R2" x="81.015" y="53.046" smashed="yes"> -<attribute name="NAME" x="80.253" y="53.8715" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="81.015" y="53.046" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="81.015" y="53.046" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="82.899" y="52.714" size="0.6096" layer="27"/> -</element> -<element name="R25" library="borkedlabs-passives" package="0805" value="2R2" x="81.015" y="54.887" smashed="yes"> -<attribute name="NAME" x="80.253" y="55.7125" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="81.015" y="54.887" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="81.015" y="54.887" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="82.799" y="54.755" size="0.6096" layer="27"/> -</element> -<element name="R28" library="borkedlabs-passives" package="0805" value="2R2" x="80.25" y="42.65" smashed="yes" rot="R90"> -<attribute name="NAME" x="79.4245" y="41.888" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="80.25" y="42.65" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="80.25" y="42.65" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="80.482" y="39.534" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="R29" library="borkedlabs-passives" package="0805" value="2R2" x="80.25" y="46.15" smashed="yes" rot="R270"> -<attribute name="NAME" x="81.0755" y="46.912" size="1.016" layer="25" rot="R270"/> -<attribute name="PACKAGE" value="0805" x="80.25" y="46.15" size="1.778" layer="27" rot="R270" display="off"/> -<attribute name="PRECISION" value="" x="80.25" y="46.15" size="1.778" layer="27" rot="R270" display="off"/> -<attribute name="VALUE" x="79.718" y="49.366" size="0.6096" layer="27" rot="R270"/> -</element> -<element name="R27" library="borkedlabs-passives" package="0805" value="5K6" x="63" y="35.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="63.762" y="34.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="63" y="35.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="63" y="35.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="66.016" y="35.932" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="R26" library="borkedlabs-passives" package="0805" value="39K" x="63" y="33.5" smashed="yes"> -<attribute name="NAME" x="62.238" y="34.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="63" y="33.5" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="63" y="33.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="64.684" y="33.068" size="0.6096" layer="27"/> -</element> -<element name="R32" library="borkedlabs-passives" package="0805" value="5K6" x="63" y="31.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="63.762" y="30.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="63" y="31.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="63" y="31.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="64.884" y="31.368" size="0.6096" layer="27"/> -</element> -<element name="R31" library="borkedlabs-passives" package="0805" value="39K" x="63" y="29.5" smashed="yes"> -<attribute name="NAME" x="62.238" y="30.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="63" y="29.5" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="63" y="29.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="64.684" y="29.268" size="0.6096" layer="27"/> -</element> -<element name="R33" library="borkedlabs-passives" package="0805" value="2R2" x="80.25" y="33" smashed="yes" rot="R90"> -<attribute name="NAME" x="79.4245" y="32.238" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="80.25" y="33" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="80.25" y="33" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="82.282" y="31.984" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="R34" library="borkedlabs-passives" package="0805" value="2R2" x="80.25" y="37" smashed="yes" rot="R270"> -<attribute name="NAME" x="81.0755" y="37.762" size="1.016" layer="25" rot="R270"/> -<attribute name="PACKAGE" value="0805" x="80.25" y="37" size="1.778" layer="27" rot="R270" display="off"/> -<attribute name="PRECISION" value="" x="80.25" y="37" size="1.778" layer="27" rot="R270" display="off"/> -<attribute name="VALUE" x="78.618" y="37.716" size="0.6096" layer="27" rot="R270"/> -</element> -<element name="R37" library="borkedlabs-passives" package="0805" value="5K6" x="63" y="27.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="63.762" y="26.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="63" y="27.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="63" y="27.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="64.684" y="27.168" size="0.6096" layer="27"/> -</element> -<element name="R36" library="borkedlabs-passives" package="0805" value="39K" x="63" y="25.5" smashed="yes"> -<attribute name="NAME" x="62.238" y="26.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="63" y="25.5" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="63" y="25.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="64.584" y="25.168" size="0.6096" layer="27"/> -</element> -<element name="U2" library="power" package="HTSSOP-56" value="DRV8302" x="69.75" y="46.75"/> -<element name="C31" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="76.75" y="50" smashed="yes"> -<attribute name="NAME" x="75.861" y="51.397" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="76.75" y="50" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="76.75" y="50" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="75.534" y="48.687" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="76.75" y="50" size="1.778" layer="27" display="off"/> -</element> -<element name="C32" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="76.75" y="47" smashed="yes"> -<attribute name="NAME" x="75.861" y="48.397" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="76.75" y="47" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="76.75" y="47" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="75.734" y="47.687" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="76.75" y="47" size="1.778" layer="27" display="off"/> -</element> -<element name="C33" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="76.7" y="43.1" smashed="yes" rot="R180"> -<attribute name="NAME" x="77.589" y="41.703" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0603" x="76.7" y="43.1" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="76.7" y="43.1" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="75.584" y="43.787" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="76.7" y="43.1" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="C28" library="borkedlabs-passives" package="0805" value="1nF" x="68" y="36.5" smashed="yes"> -<attribute name="NAME" x="67.238" y="37.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="68" y="36.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="68" y="36.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="67.484" y="37.868" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="68" y="36.5" size="1.778" layer="27" display="off"/> -</element> -<element name="C29" library="borkedlabs-passives" package="0805" value="1nF" x="71.3" y="36.5" smashed="yes"> -<attribute name="NAME" x="70.538" y="37.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="71.3" y="36.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="71.3" y="36.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="70.684" y="37.468" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="71.3" y="36.5" size="1.778" layer="27" display="off"/> -</element> -<element name="R18" library="borkedlabs-passives" package="0805" value="R100" x="67.1" y="34.3" smashed="yes" rot="R90"> -<attribute name="NAME" x="66.2745" y="33.538" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="67.1" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="67.1" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="67.332" y="30.684" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="R19" library="borkedlabs-passives" package="0805" value="R100" x="68.8" y="34.3" smashed="yes" rot="R90"> -<attribute name="NAME" x="67.9745" y="33.538" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="68.8" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="68.8" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="69.132" y="30.684" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="R20" library="borkedlabs-passives" package="0805" value="R100" x="70.5" y="34.3" smashed="yes" rot="R90"> -<attribute name="NAME" x="69.6745" y="33.538" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="70.5" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="70.5" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="70.732" y="30.684" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="R21" library="borkedlabs-passives" package="0805" value="R100" x="72.2" y="34.3" smashed="yes" rot="R90"> -<attribute name="NAME" x="71.3745" y="33.538" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="72.2" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="72.2" y="34.3" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="72.432" y="30.684" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="C24" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="74.5" y="39.1" smashed="yes"> -<attribute name="NAME" x="73.611" y="40.497" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="74.5" y="39.1" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="74.5" y="39.1" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="74.684" y="39.787" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="74.5" y="39.1" size="1.778" layer="27" display="off"/> -</element> -<element name="C26" library="borkedlabs-passives" package="1206" value="10uF" x="74.058" y="34.492" smashed="yes" rot="R270"> -<attribute name="NAME" x="75.201" y="35.762" size="1.016" layer="25" rot="R270"/> -<attribute name="PACKAGE" value="1206" x="74.058" y="34.492" size="1.778" layer="27" rot="R270" display="off"/> -<attribute name="TYPE" value="" x="74.058" y="34.492" size="1.778" layer="27" rot="R270" display="off"/> -<attribute name="VALUE" x="77.089" y="33.436" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="74.058" y="34.492" size="1.778" layer="27" rot="R270" display="off"/> -</element> -<element name="C20" library="borkedlabs-passives" package="1206" value="2.2uF" x="66.25" y="38.7" smashed="yes" rot="R180"> -<attribute name="NAME" x="67.52" y="37.557" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="1206" x="66.25" y="38.7" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="66.25" y="38.7" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="63.347" y="37.894" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="66.25" y="38.7" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="C19" library="borkedlabs-passives" package="0805" value="22nF" x="62.8" y="46.5" smashed="yes"> -<attribute name="NAME" x="62.038" y="47.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="62.8" y="46.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="62.8" y="46.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="59.484" y="46.168" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="62.8" y="46.5" size="1.778" layer="27" display="off"/> -</element> -<element name="C16" library="borkedlabs-passives" package="1206" value="2.2uF" x="61.4" y="50.45" smashed="yes"> -<attribute name="NAME" x="60.13" y="51.593" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="61.4" y="50.45" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="61.4" y="50.45" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="61.644" y="49.503" size="0.6096" layer="27" rot="R90"/> -<attribute name="VOLTAGE" value="" x="61.4" y="50.45" size="1.778" layer="27" display="off"/> -</element> -<element name="C13" library="borkedlabs-passives" package="1206" value="2.2uF" x="61.4" y="48.7" smashed="yes"> -<attribute name="NAME" x="60.13" y="49.843" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="61.4" y="48.7" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="61.4" y="48.7" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="61.594" y="47.303" size="0.6096" layer="27" rot="R90"/> -<attribute name="VOLTAGE" value="" x="61.4" y="48.7" size="1.778" layer="27" display="off"/> -</element> -<element name="C17" library="borkedlabs-passives" package="1206" value="2.2uF" x="61.5" y="40" smashed="yes"> -<attribute name="NAME" x="60.23" y="41.143" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="61.5" y="40" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="61.5" y="40" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="61.794" y="38.803" size="0.6096" layer="27" rot="R90"/> -<attribute name="VOLTAGE" value="" x="61.5" y="40" size="1.778" layer="27" display="off"/> -</element> -<element name="C14" library="borkedlabs-passives" package="1206" value="2.2uF" x="61.5" y="41.75" smashed="yes"> -<attribute name="NAME" x="60.23" y="42.893" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="61.5" y="41.75" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="61.5" y="41.75" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="61.744" y="41.103" size="0.6096" layer="27" rot="R90"/> -<attribute name="VOLTAGE" value="" x="61.5" y="41.75" size="1.778" layer="27" display="off"/> -</element> -<element name="R11" library="borkedlabs-passives" package="0805" value="10k" x="60.9" y="54.1" smashed="yes" rot="R180"> -<attribute name="NAME" x="61.662" y="53.2745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="60.9" y="54.1" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="60.9" y="54.1" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="64.116" y="54.332" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="C40" library="borkedlabs-passives" package="1206" value="10uF" x="86.75" y="29.4" smashed="yes" rot="R180"> -<attribute name="NAME" x="88.02" y="28.257" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="1206" x="86.75" y="29.4" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="86.75" y="29.4" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="89.353" y="29.006" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="86.75" y="29.4" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="C42" library="borkedlabs-passives" package="1206" value="10uF" x="82.65" y="49.05" smashed="yes" rot="R180"> -<attribute name="NAME" x="83.92" y="47.907" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="1206" x="82.65" y="49.05" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="82.65" y="49.05" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="87.147" y="50.044" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="82.65" y="49.05" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="C44" library="borkedlabs-passives" package="1206" value="10uF" x="82.85" y="59.05" smashed="yes" rot="R180"> -<attribute name="NAME" x="84.12" y="57.907" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="1206" x="82.85" y="59.05" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="82.85" y="59.05" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="85.653" y="58.756" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="82.85" y="59.05" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="R10" library="borkedlabs-passives" package="0805" value="10k" x="60.9" y="52.35" smashed="yes" rot="R180"> -<attribute name="NAME" x="61.662" y="51.5245" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="60.9" y="52.35" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="60.9" y="52.35" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="63.816" y="52.682" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="R8" library="borkedlabs-passives" package="0805" value="470R" x="37.5" y="51.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="38.262" y="50.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="37.5" y="51.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="37.5" y="51.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="38.016" y="51.732" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="J8" library="power" package="PWRPAD_M3-PEM-MOUNT" value="PWRPAD" x="96.5" y="25"/> -<element name="J9" library="power" package="PWRPAD_M3-PEM-MOUNT" value="PWRPAD" x="96.5" y="16.5"/> -<element name="C25" library="borkedlabs-passives" package="0805" value="1uF" x="74.5" y="37.8" smashed="yes"> -<attribute name="NAME" x="73.738" y="38.6255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="74.5" y="37.8" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="74.5" y="37.8" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="76.184" y="37.668" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="74.5" y="37.8" size="1.778" layer="27" display="off"/> -</element> -<element name="U$2" library="fab" package="CBA-SILK-LOGO" value="" x="49.1" y="15.3"/> -<element name="C6" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="38.4" y="44.4" smashed="yes" rot="R180"> -<attribute name="NAME" x="39.289" y="43.003" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0603" x="38.4" y="44.4" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="38.4" y="44.4" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="36.716" y="44.613" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="38.4" y="44.4" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="C4" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="41.7" y="54.9" smashed="yes" rot="R180"> -<attribute name="NAME" x="42.589" y="53.503" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0603" x="41.7" y="54.9" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="41.7" y="54.9" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="42.716" y="57.313" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="41.7" y="54.9" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="C3" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="39.75" y="50" smashed="yes" rot="R90"> -<attribute name="NAME" x="38.353" y="49.111" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0603" x="39.75" y="50" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="TYPE" value="" x="39.75" y="50" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="40.063" y="51.684" size="0.6096" layer="27" rot="R90"/> -<attribute name="VOLTAGE" value="" x="39.75" y="50" size="1.778" layer="27" rot="R90" display="off"/> -</element> -<element name="C2" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="46.4" y="53.2" smashed="yes"> -<attribute name="NAME" x="45.511" y="54.597" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="46.4" y="53.2" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="46.4" y="53.2" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="42.784" y="52.887" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="46.4" y="53.2" size="1.778" layer="27" display="off"/> -</element> -<element name="S1" library="fab" package="TACT-SWITCH-KMR6" value="2-8X4-5_SWITCH" x="43.9" y="15.3" rot="R180"/> -<element name="C39" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="59.5" y="35.5" smashed="yes"> -<attribute name="NAME" x="58.611" y="36.897" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="59.5" y="35.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="59.5" y="35.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="58.584" y="35.387" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="59.5" y="35.5" size="1.778" layer="27" display="off"/> -</element> -<element name="C41" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="59.5" y="31.5" smashed="yes"> -<attribute name="NAME" x="58.611" y="32.897" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="59.5" y="31.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="59.5" y="31.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="58.284" y="31.187" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="59.5" y="31.5" size="1.778" layer="27" display="off"/> -</element> -<element name="C43" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="59.5" y="27.5" smashed="yes"> -<attribute name="NAME" x="58.611" y="28.897" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="59.5" y="27.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="59.5" y="27.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="58.384" y="27.287" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="59.5" y="27.5" size="1.778" layer="27" display="off"/> -</element> -<element name="R39" library="borkedlabs-passives" package="0805" value="5K6" x="63" y="23.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="63.762" y="22.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="63" y="23.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="63" y="23.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="64.584" y="23.268" size="0.6096" layer="27"/> -</element> -<element name="R38" library="borkedlabs-passives" package="0805" value="39K" x="63" y="21.5" smashed="yes"> -<attribute name="NAME" x="62.238" y="22.3255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="63" y="21.5" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="63" y="21.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="64.684" y="21.168" size="0.6096" layer="27"/> -</element> -<element name="C45" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="59.5" y="23.5" smashed="yes"> -<attribute name="NAME" x="58.611" y="24.897" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="59.5" y="23.5" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="59.5" y="23.5" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="58.384" y="23.187" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="59.5" y="23.5" size="1.778" layer="27" display="off"/> -</element> -<element name="J6" library="SparkFun-Connectors" package="JST-6-SMD-HORI-1.0MM" value="BM06B-SRSS-TB" x="44" y="61.5"> -<attribute name="PROD_ID" value="XXX-00000" x="44" y="61.5" size="1.778" layer="27" display="off"/> -</element> -<element name="L1" library="borkedlabs-passives" package="0805" value="10uH" x="50" y="38.3" smashed="yes"> -<attribute name="NAME" x="49.238" y="39.1255" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="50" y="38.3" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="49.184" y="39.368" size="0.6096" layer="27"/> -</element> -<element name="C12" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="49.9" y="39.8" smashed="yes"> -<attribute name="NAME" x="49.011" y="41.197" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="49.9" y="39.8" size="1.778" layer="27" display="off"/> -<attribute name="TYPE" value="" x="49.9" y="39.8" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="48.784" y="38.487" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="49.9" y="39.8" size="1.778" layer="27" display="off"/> -</element> -<element name="C1" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="43" y="39.9" smashed="yes" rot="R180"> -<attribute name="NAME" x="43.889" y="38.503" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0603" x="43" y="39.9" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="43" y="39.9" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="44.016" y="39.013" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="43" y="39.9" size="1.778" layer="27" rot="R180" display="off"/> -</element> -<element name="S3" library="fab" package="SLIDESWITCH-CL-SB-22A" value="SLIDE-SWITCHSMT" x="61.66" y="59.348" smashed="yes" rot="R180"> -<attribute name="NAME" x="64.454" y="56.554" size="1.27" layer="25" rot="R180"/> -<attribute name="VALUE" x="64.362" y="56.62" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="R3" library="borkedlabs-passives" package="0805" value="10k" x="55.96" y="60.136" smashed="yes" rot="R90"> -<attribute name="NAME" x="55.1345" y="59.374" size="1.016" layer="25" rot="R90"/> -<attribute name="PACKAGE" value="0805" x="55.96" y="60.136" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="PRECISION" value="" x="55.96" y="60.136" size="1.778" layer="27" rot="R90" display="off"/> -<attribute name="VALUE" x="56.192" y="62.22" size="0.6096" layer="27" rot="R90"/> -</element> -<element name="J3" library="SparkFun-Connectors" package="1X08_NO_SILK" value="" x="56.1" y="44.6" rot="R270"> -<attribute name="PROD_ID" value="CONN-08438" x="56.1" y="44.6" size="1.778" layer="27" rot="R270" display="off"/> -</element> -<element name="R6" library="borkedlabs-passives" package="0805" value="470R" x="37.5" y="53.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="38.262" y="52.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="37.5" y="53.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="37.5" y="53.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="38.116" y="53.732" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="J12" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="76" y="58.5" smashed="yes"/> -<element name="J14" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="35.5" y="58.5"/> -<element name="J15" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="35.5" y="16"/> -<element name="D7" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="59.5" y="33.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="59.5" y="32.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> -</element> -<element name="D2" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="59.5" y="29.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="59.5" y="28.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> -</element> -<element name="D3" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="59.5" y="25.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="59.5" y="24.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> -</element> -<element name="D5" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="59.5" y="21.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="59.5" y="20.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> -</element> -<element name="R2" library="borkedlabs-passives" package="0805" value="10k" x="76.1" y="52.9" smashed="yes" rot="R180"> -<attribute name="NAME" x="76.862" y="52.0745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="76.1" y="52.9" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="76.1" y="52.9" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="77.784" y="52.568" size="0.6096" layer="27"/> -</element> -<element name="C8" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="76.1" y="51.6" smashed="yes"> -<attribute name="NAME" x="75.211" y="52.997" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0603" x="76.1" y="51.6" size="0.6096" layer="27" display="off"/> -<attribute name="TYPE" value="" x="76.1" y="51.6" size="0.6096" layer="27" display="off"/> -<attribute name="VALUE" x="77.684" y="51.287" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="76.1" y="51.6" size="0.6096" layer="27" display="off"/> -</element> -<element name="C11" library="borkedlabs-passives" package="1206" value="10uF" x="51.4" y="59.5" smashed="yes"> -<attribute name="NAME" x="50.13" y="60.643" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="51.4" y="59.5" size="0.6096" layer="27" display="off"/> -<attribute name="TYPE" value="" x="51.4" y="59.5" size="0.6096" layer="27" display="off"/> -<attribute name="VALUE" x="54.303" y="59.206" size="1.016" layer="27"/> -<attribute name="VOLTAGE" value="" x="51.4" y="59.5" size="0.6096" layer="27" display="off"/> -</element> -<element name="R4" library="power" package="R2512" value="" x="83" y="44.15" smashed="yes" rot="R90"> -<attribute name="NAME" x="81.095" y="41.61" size="1.016" layer="25" rot="R90"/> -<attribute name="VALUE" x="86.175" y="41.61" size="1.016" layer="27" rot="R90"/> -</element> -<element name="R5" library="power" package="R2512" value="" x="83" y="35" rot="R90"/> -<element name="U$4" library="lights" package="LED0805" value="LED0805" x="34" y="53.5" smashed="yes"> -<attribute name="NAME" x="33.111" y="54.897" size="1.016" layer="25"/> -<attribute name="VALUE" x="28.184" y="53.087" size="0.6096" layer="27" ratio="10"/> -</element> -<element name="U$5" library="lights" package="LED0805" value="LED0805" x="34" y="51.5" smashed="yes"> -<attribute name="NAME" x="33.111" y="52.897" size="1.016" layer="25"/> -<attribute name="VALUE" x="28.084" y="51.187" size="0.6096" layer="27" ratio="10"/> -</element> -<element name="R12" library="borkedlabs-passives" package="0805" value="470R" x="37.5" y="49.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="38.262" y="48.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="37.5" y="49.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="37.5" y="49.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="37.716" y="49.732" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="U$8" library="lights" package="LED0805" value="LED0805" x="34" y="49.5" smashed="yes"> -<attribute name="NAME" x="33.111" y="50.897" size="1.016" layer="25"/> -<attribute name="VALUE" x="28.084" y="49.287" size="0.6096" layer="27" ratio="10"/> -</element> -<element name="J7" library="power" package="PWRPAD_M3-PEM-MOUNT" value="PWRPAD" x="96.5" y="58"/> -<element name="J10" library="power" package="PWRPAD_M3-PEM-MOUNT" value="PWRPAD" x="96.5" y="46"/> -<element name="J11" library="power" package="PWRPAD_M3-PEM-MOUNT" value="PWRPAD" x="96.5" y="34.5"/> -<element name="U$9" library="power" package="SON-5X6" value="INTEGRATED_HALF-CSD88599SON" x="89.25" y="54.25" rot="R180"/> -<element name="U$10" library="power" package="SON-5X6" value="INTEGRATED_HALF-CSD88599SON" x="89.25" y="45.75" rot="R180"/> -<element name="U$11" library="power" package="SON-5X6" value="INTEGRATED_HALF-CSD88599SON" x="89.25" y="37.75" rot="R180"/> -<element name="R13" library="borkedlabs-passives" package="0805" value="therm" x="87.25" y="31.25" smashed="yes"> -<attribute name="NAME" x="86.488" y="32.0755" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="0805" x="87.25" y="31.25" size="1.778" layer="27" display="off"/> -<attribute name="PRECISION" value="" x="87.25" y="31.25" size="1.778" layer="27" display="off"/> -<attribute name="VALUE" x="88.934" y="30.918" size="0.6096" layer="27"/> -</element> -<element name="R14" library="borkedlabs-passives" package="0805" value="10k" x="87.25" y="32.75" smashed="yes" rot="R180"> -<attribute name="NAME" x="88.012" y="31.9245" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="87.25" y="32.75" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="87.25" y="32.75" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="90.266" y="33.082" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="BFC1" library="power" package="BFC-8MM" value="BFC8MM" x="88.7" y="22.2" rot="R270"/> -<element name="R7" library="borkedlabs-passives" package="0805" value="470R" x="34" y="45.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="34.762" y="44.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="34" y="45.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="34" y="45.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="32.216" y="45.632" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="R9" library="borkedlabs-passives" package="0805" value="470R" x="34" y="47.5" smashed="yes" rot="R180"> -<attribute name="NAME" x="34.762" y="46.6745" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="0805" x="34" y="47.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="PRECISION" value="" x="34" y="47.5" size="1.778" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="32.116" y="47.732" size="0.6096" layer="27" rot="R180"/> -</element> -<element name="C10" library="borkedlabs-passives" package="1206" value="10uF" x="79.5" y="30.15" smashed="yes"> -<attribute name="NAME" x="78.23" y="31.293" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="79.5" y="30.15" size="0.6096" layer="27" display="off"/> -<attribute name="TYPE" value="" x="79.5" y="30.15" size="0.6096" layer="27" display="off"/> -<attribute name="VALUE" x="75.003" y="29.956" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="79.5" y="30.15" size="0.6096" layer="27" display="off"/> -</element> -<element name="C15" library="borkedlabs-passives" package="1206" value="10uF" x="79.5" y="28.4" smashed="yes"> -<attribute name="NAME" x="78.23" y="29.543" size="1.016" layer="25"/> -<attribute name="PACKAGE" value="1206" x="79.5" y="28.4" size="0.6096" layer="27" display="off"/> -<attribute name="TYPE" value="" x="79.5" y="28.4" size="0.6096" layer="27" display="off"/> -<attribute name="VALUE" x="75.103" y="28.006" size="0.6096" layer="27"/> -<attribute name="VOLTAGE" value="" x="79.5" y="28.4" size="0.6096" layer="27" display="off"/> -</element> -<element name="U$14" library="connector" package="JRTOMBSTONE" value="JRTOMBSTONE" x="59.3" y="19.8" rot="MR90"/> -<element name="J13" library="SparkFun-Connectors" package="1X04_NO_SILK" value="" x="56.1" y="54.8" rot="R270"> -<attribute name="PROD_ID" value="CONN-09696" x="56.1" y="54.8" size="0.6096" layer="27" rot="R270" display="off"/> -</element> -<element name="C18" library="borkedlabs-passives" package="1206" value="10uF" x="69.8" y="56.7" smashed="yes" rot="R180"> -<attribute name="NAME" x="71.07" y="55.557" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="1206" x="69.8" y="56.7" size="0.6096" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="69.8" y="56.7" size="0.6096" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="73.997" y="56.994" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="69.8" y="56.7" size="0.6096" layer="27" rot="R180" display="off"/> -</element> -<element name="C21" library="borkedlabs-passives" package="1206" value="10uF" x="69.8" y="54.9" smashed="yes" rot="R180"> -<attribute name="NAME" x="71.07" y="53.757" size="1.016" layer="25" rot="R180"/> -<attribute name="PACKAGE" value="1206" x="69.8" y="54.9" size="0.6096" layer="27" rot="R180" display="off"/> -<attribute name="TYPE" value="" x="69.8" y="54.9" size="0.6096" layer="27" rot="R180" display="off"/> -<attribute name="VALUE" x="74.097" y="55.094" size="0.6096" layer="27" rot="R180"/> -<attribute name="VOLTAGE" value="" x="69.8" y="54.9" size="0.6096" layer="27" rot="R180" display="off"/> -</element> -<element name="J1" library="connector" package="RJ45-LED-RJE7318800XXX" value="ATK-PHY" x="38.5" y="30" rot="R270"/> -<element name="U1" library="microcontrollers" package="QFN-64-9X9MM" value="ATXMEGA_A3UQFN" x="45.9" y="46.6" rot="R180"/> -<element name="J2" library="microcontrollers" package="PDI_2X3_SMD" value="" x="49.5" y="32.5" rot="R180"> -<attribute name="PROD_ID" value="CONN-11290" x="49.5" y="32.5" size="0.6096" layer="27" ratio="10" rot="R180" display="off"/> -</element> -<element name="Y1" library="passives" package="RES_PRQC" value="RESONATORPQRC" x="46.8" y="39.6"/> -<element name="C5" library="borkedlabs-passives" package="1206" value="10uF" x="51.4" y="57.7"> -<attribute name="PACKAGE" value="1206" x="51.4" y="57.7" size="0.6096" layer="27" ratio="10" display="off"/> -<attribute name="TYPE" value="" x="51.4" y="57.7" size="0.6096" layer="27" ratio="10" display="off"/> -<attribute name="VOLTAGE" value="" x="51.4" y="57.7" size="0.6096" layer="27" ratio="10" display="off"/> -</element> -<element name="C7" library="borkedlabs-passives" package="1206" value="10uF" x="51.4" y="56"> -<attribute name="PACKAGE" value="1206" x="51.4" y="56" size="0.6096" layer="27" ratio="10" display="off"/> -<attribute name="TYPE" value="" x="51.4" y="56" size="0.6096" layer="27" ratio="10" display="off"/> -<attribute name="VOLTAGE" value="" x="51.4" y="56" size="0.6096" layer="27" ratio="10" display="off"/> -</element> -<element name="C9" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="52.1" y="49" rot="R270"> -<attribute name="PACKAGE" value="0603" x="52.1" y="49" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> -<attribute name="TYPE" value="" x="52.1" y="49" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> -<attribute name="VOLTAGE" value="" x="52.1" y="49" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> -</element> -<element name="J4" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="76" y="16"/> -<element name="U$1" library="connector" package="FIDUCIAL_1MM" value="FIDUCIAL" x="40" y="16"/> -<element name="U$3" library="connector" package="FIDUCIAL_1MM" value="FIDUCIAL" x="80.5" y="16"/> +<element name="R24" library="borkedlabs-passives" package="0805" value="2R2" x="51.1" y="44.55" smashed="yes"> +<attribute name="NAME" x="50.338" y="45.3755" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="51.1" y="44.55" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="51.1" y="44.55" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="52.984" y="44.218" size="0.6096" layer="27"/> +</element> +<element name="R25" library="borkedlabs-passives" package="0805" value="2R2" x="51.1" y="33.95" smashed="yes"> +<attribute name="NAME" x="50.338" y="34.7755" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="51.1" y="33.95" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="51.1" y="33.95" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="52.884" y="33.818" size="0.6096" layer="27"/> +</element> +<element name="R28" library="borkedlabs-passives" package="0805" value="2R2" x="51.1" y="32" smashed="yes"> +<attribute name="NAME" x="50.338" y="32.8255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="51.1" y="32" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="51.1" y="32" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="47.984" y="31.768" size="0.6096" layer="27"/> +</element> +<element name="R29" library="borkedlabs-passives" package="0805" value="2R2" x="51.1" y="22.2" smashed="yes"> +<attribute name="NAME" x="50.338" y="23.0255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="51.1" y="22.2" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="51.1" y="22.2" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="47.884" y="21.668" size="0.6096" layer="27"/> +</element> +<element name="R27" library="borkedlabs-passives" package="0805" value="5K6" x="31" y="26.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="31.762" y="25.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="31" y="26.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="31" y="26.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="34.016" y="26.932" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="R26" library="borkedlabs-passives" package="0805" value="39K" x="31" y="24.5" smashed="yes"> +<attribute name="NAME" x="30.238" y="25.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="31" y="24.5" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="31" y="24.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="32.684" y="24.068" size="0.6096" layer="27"/> +</element> +<element name="R32" library="borkedlabs-passives" package="0805" value="5K6" x="31" y="22.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="31.762" y="21.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="31" y="22.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="31" y="22.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="32.884" y="22.368" size="0.6096" layer="27"/> +</element> +<element name="R31" library="borkedlabs-passives" package="0805" value="39K" x="31" y="20.5" smashed="yes"> +<attribute name="NAME" x="30.238" y="21.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="31" y="20.5" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="31" y="20.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="32.684" y="20.268" size="0.6096" layer="27"/> +</element> +<element name="R33" library="borkedlabs-passives" package="0805" value="2R2" x="51.1" y="20.5" smashed="yes"> +<attribute name="NAME" x="50.338" y="21.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="51.1" y="20.5" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="51.1" y="20.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="50.084" y="18.468" size="0.6096" layer="27"/> +</element> +<element name="R34" library="borkedlabs-passives" package="0805" value="2R2" x="50.1" y="13.95" smashed="yes"> +<attribute name="NAME" x="49.338" y="14.7755" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="50.1" y="13.95" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="50.1" y="13.95" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="49.384" y="12.318" size="0.6096" layer="27"/> +</element> +<element name="R37" library="borkedlabs-passives" package="0805" value="5K6" x="31" y="18.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="31.762" y="17.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="31" y="18.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="31" y="18.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="32.684" y="18.168" size="0.6096" layer="27"/> +</element> +<element name="R36" library="borkedlabs-passives" package="0805" value="39K" x="31" y="16.5" smashed="yes"> +<attribute name="NAME" x="30.238" y="17.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="31" y="16.5" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="31" y="16.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="32.584" y="16.168" size="0.6096" layer="27"/> +</element> +<element name="U2" library="power" package="HTSSOP-56" value="DRV8302" x="37.75" y="37.75"/> +<element name="C31" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="44.75" y="41" smashed="yes"> +<attribute name="NAME" x="43.861" y="42.397" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="44.75" y="41" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="44.75" y="41" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="43.534" y="39.687" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="44.75" y="41" size="1.778" layer="27" display="off"/> +</element> +<element name="C32" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="44.75" y="38" smashed="yes"> +<attribute name="NAME" x="43.861" y="39.397" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="44.75" y="38" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="44.75" y="38" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="43.734" y="38.687" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="44.75" y="38" size="1.778" layer="27" display="off"/> +</element> +<element name="C33" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="44.7" y="34.1" smashed="yes" rot="R180"> +<attribute name="NAME" x="45.589" y="32.703" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0603" x="44.7" y="34.1" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="TYPE" value="" x="44.7" y="34.1" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="43.584" y="34.787" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="44.7" y="34.1" size="1.778" layer="27" rot="R180" display="off"/> +</element> +<element name="C28" library="borkedlabs-passives" package="0805" value="1nF" x="36" y="27.5" smashed="yes"> +<attribute name="NAME" x="35.238" y="28.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="36" y="27.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="36" y="27.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="35.484" y="28.868" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="36" y="27.5" size="1.778" layer="27" display="off"/> +</element> +<element name="C29" library="borkedlabs-passives" package="0805" value="1nF" x="39.3" y="27.5" smashed="yes"> +<attribute name="NAME" x="38.538" y="28.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="39.3" y="27.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="39.3" y="27.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="38.684" y="28.468" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="39.3" y="27.5" size="1.778" layer="27" display="off"/> +</element> +<element name="R18" library="borkedlabs-passives" package="0805" value="R100" x="35.1" y="25.3" smashed="yes" rot="R90"> +<attribute name="NAME" x="34.2745" y="24.538" size="1.016" layer="25" rot="R90"/> +<attribute name="PACKAGE" value="0805" x="35.1" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="PRECISION" value="" x="35.1" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="VALUE" x="35.332" y="21.684" size="0.6096" layer="27" rot="R90"/> +</element> +<element name="R19" library="borkedlabs-passives" package="0805" value="R100" x="36.8" y="25.3" smashed="yes" rot="R90"> +<attribute name="NAME" x="35.9745" y="24.538" size="1.016" layer="25" rot="R90"/> +<attribute name="PACKAGE" value="0805" x="36.8" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="PRECISION" value="" x="36.8" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="VALUE" x="37.132" y="21.684" size="0.6096" layer="27" rot="R90"/> +</element> +<element name="R20" library="borkedlabs-passives" package="0805" value="R100" x="38.5" y="25.3" smashed="yes" rot="R90"> +<attribute name="NAME" x="37.6745" y="24.538" size="1.016" layer="25" rot="R90"/> +<attribute name="PACKAGE" value="0805" x="38.5" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="PRECISION" value="" x="38.5" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="VALUE" x="38.732" y="21.684" size="0.6096" layer="27" rot="R90"/> +</element> +<element name="R21" library="borkedlabs-passives" package="0805" value="R100" x="40.1" y="25.3" smashed="yes" rot="R90"> +<attribute name="NAME" x="39.2745" y="24.538" size="1.016" layer="25" rot="R90"/> +<attribute name="PACKAGE" value="0805" x="40.1" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="PRECISION" value="" x="40.1" y="25.3" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="VALUE" x="40.332" y="21.684" size="0.6096" layer="27" rot="R90"/> +</element> +<element name="C24" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="42.75" y="30.1" smashed="yes"> +<attribute name="NAME" x="41.861" y="31.497" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="42.75" y="30.1" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="42.75" y="30.1" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="42.934" y="30.787" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="42.75" y="30.1" size="1.778" layer="27" display="off"/> +</element> +<element name="C26" library="borkedlabs-passives" package="1206" value="10uF" x="43.308" y="28.558" smashed="yes"> +<attribute name="NAME" x="42.038" y="29.701" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="1206" x="43.308" y="28.558" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="43.308" y="28.558" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="44.364" y="31.589" size="0.6096" layer="27" rot="R270"/> +<attribute name="VOLTAGE" value="" x="43.308" y="28.558" size="1.778" layer="27" display="off"/> +</element> +<element name="C20" library="borkedlabs-passives" package="1206" value="10uF" x="34.25" y="29.7" smashed="yes" rot="R180"> +<attribute name="NAME" x="35.52" y="28.557" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="1206" x="34.25" y="29.7" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="TYPE" value="" x="34.25" y="29.7" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="31.347" y="28.894" size="0.6096" layer="27" rot="R180"/> +<attribute name="VOLTAGE" value="" x="34.25" y="29.7" size="1.778" layer="27" rot="R180" display="off"/> +</element> +<element name="C19" library="borkedlabs-passives" package="0805" value="22nF" x="30.8" y="37.5" smashed="yes"> +<attribute name="NAME" x="30.038" y="38.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="30.8" y="37.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="30.8" y="37.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="27.484" y="37.168" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="30.8" y="37.5" size="1.778" layer="27" display="off"/> +</element> +<element name="C13" library="borkedlabs-passives" package="1206" value="10uF" x="29.4" y="40.8" smashed="yes"> +<attribute name="NAME" x="28.13" y="41.943" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="1206" x="29.4" y="40.8" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="29.4" y="40.8" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="29.594" y="39.403" size="0.6096" layer="27" rot="R90"/> +<attribute name="VOLTAGE" value="" x="29.4" y="40.8" size="1.778" layer="27" display="off"/> +</element> +<element name="C14" library="borkedlabs-passives" package="1206" value="10uF" x="29.5" y="32.75" smashed="yes"> +<attribute name="NAME" x="28.23" y="33.893" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="1206" x="29.5" y="32.75" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="29.5" y="32.75" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="29.744" y="32.103" size="0.6096" layer="27" rot="R90"/> +<attribute name="VOLTAGE" value="" x="29.5" y="32.75" size="1.778" layer="27" display="off"/> +</element> +<element name="R11" library="borkedlabs-passives" package="0805" value="10k" x="28.9" y="45.1" smashed="yes" rot="R180"> +<attribute name="NAME" x="29.662" y="44.2745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="28.9" y="45.1" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="28.9" y="45.1" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="32.116" y="45.332" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="R10" library="borkedlabs-passives" package="0805" value="10k" x="28.9" y="43.35" smashed="yes" rot="R180"> +<attribute name="NAME" x="29.662" y="42.5245" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="28.9" y="43.35" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="28.9" y="43.35" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="31.816" y="43.682" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="R8" library="borkedlabs-passives" package="0805" value="470R" x="5" y="42.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="5.762" y="41.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="5" y="42.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="5" y="42.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="5.516" y="42.732" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="J8" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="47.5" y="50"/> +<element name="J9" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="47.5" y="4"/> +<element name="U$2" library="fab" package="CBA-SILK-LOGO" value="" x="3.5" y="36"/> +<element name="C6" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="7.2" y="35.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="8.089" y="34.103" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0603" x="7.2" y="35.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="TYPE" value="" x="7.2" y="35.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="5.516" y="35.713" size="0.6096" layer="27" rot="R180"/> +<attribute name="VOLTAGE" value="" x="7.2" y="35.5" size="1.778" layer="27" rot="R180" display="off"/> +</element> +<element name="C4" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="7.8" y="47.3" smashed="yes" rot="R180"> +<attribute name="NAME" x="8.689" y="45.903" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0603" x="7.8" y="47.3" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="TYPE" value="" x="7.8" y="47.3" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="8.816" y="49.713" size="0.6096" layer="27" rot="R180"/> +<attribute name="VOLTAGE" value="" x="7.8" y="47.3" size="1.778" layer="27" rot="R180" display="off"/> +</element> +<element name="C3" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="8.05" y="41.2" smashed="yes" rot="R90"> +<attribute name="NAME" x="6.653" y="40.311" size="1.016" layer="25" rot="R90"/> +<attribute name="PACKAGE" value="0603" x="8.05" y="41.2" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="TYPE" value="" x="8.05" y="41.2" size="1.778" layer="27" rot="R90" display="off"/> +<attribute name="VALUE" x="8.363" y="42.884" size="0.6096" layer="27" rot="R90"/> +<attribute name="VOLTAGE" value="" x="8.05" y="41.2" size="1.778" layer="27" rot="R90" display="off"/> +</element> +<element name="C2" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="14.4" y="44.2" smashed="yes"> +<attribute name="NAME" x="13.511" y="45.597" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="14.4" y="44.2" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="14.4" y="44.2" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="10.784" y="43.887" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="14.4" y="44.2" size="1.778" layer="27" display="off"/> +</element> +<element name="S1" library="fab" package="TACT-SWITCH-KMR6" value="2-8X4-5_SWITCH" x="2.8" y="10.6" rot="R90"/> +<element name="C39" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="27.5" y="26.5" smashed="yes"> +<attribute name="NAME" x="26.611" y="27.897" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="27.5" y="26.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="27.5" y="26.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="26.584" y="26.387" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="27.5" y="26.5" size="1.778" layer="27" display="off"/> +</element> +<element name="C41" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="27.5" y="22.5" smashed="yes"> +<attribute name="NAME" x="26.611" y="23.897" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="27.5" y="22.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="27.5" y="22.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="26.284" y="22.187" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="27.5" y="22.5" size="1.778" layer="27" display="off"/> +</element> +<element name="C43" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="27.5" y="18.5" smashed="yes"> +<attribute name="NAME" x="26.611" y="19.897" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="27.5" y="18.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="27.5" y="18.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="26.384" y="18.287" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="27.5" y="18.5" size="1.778" layer="27" display="off"/> +</element> +<element name="R39" library="borkedlabs-passives" package="0805" value="5K6" x="31" y="14.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="31.762" y="13.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="31" y="14.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="31" y="14.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="32.584" y="14.268" size="0.6096" layer="27"/> +</element> +<element name="R38" library="borkedlabs-passives" package="0805" value="39K" x="31" y="12.5" smashed="yes"> +<attribute name="NAME" x="30.238" y="13.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="31" y="12.5" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="31" y="12.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="32.684" y="12.168" size="0.6096" layer="27"/> +</element> +<element name="C45" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="27.5" y="14.5" smashed="yes"> +<attribute name="NAME" x="26.611" y="15.897" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="27.5" y="14.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="27.5" y="14.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="26.384" y="14.187" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="27.5" y="14.5" size="1.778" layer="27" display="off"/> +</element> +<element name="J6" library="SparkFun-Connectors" package="JST-6-SMD-HORI-1.0MM" value="BM06B-SRSS-TB" x="10.8" y="53.7"> +<attribute name="PROD_ID" value="XXX-00000" x="10.8" y="53.7" size="1.778" layer="27" display="off"/> +</element> +<element name="C12" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="17.9" y="31.5" smashed="yes"> +<attribute name="NAME" x="17.011" y="32.897" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="17.9" y="31.5" size="1.778" layer="27" display="off"/> +<attribute name="TYPE" value="" x="17.9" y="31.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="16.784" y="30.187" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="17.9" y="31.5" size="1.778" layer="27" display="off"/> +</element> +<element name="C1" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="12.3" y="31.2" smashed="yes" rot="R270"> +<attribute name="NAME" x="13.697" y="32.089" size="1.016" layer="25" rot="R270"/> +<attribute name="PACKAGE" value="0603" x="12.3" y="31.2" size="1.778" layer="27" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="12.3" y="31.2" size="1.778" layer="27" rot="R270" display="off"/> +<attribute name="VALUE" x="13.187" y="32.216" size="0.6096" layer="27" rot="R270"/> +<attribute name="VOLTAGE" value="" x="12.3" y="31.2" size="1.778" layer="27" rot="R270" display="off"/> +</element> +<element name="S3" library="fab" package="SLIDESWITCH-CL-SB-22A" value="SLIDE-SWITCHSMT" x="37.5" y="51.5" smashed="yes"> +<attribute name="NAME" x="34.706" y="54.294" size="1.27" layer="25"/> +<attribute name="VALUE" x="34.798" y="54.228" size="0.6096" layer="27"/> +</element> +<element name="R3" library="borkedlabs-passives" package="0805" value="10k" x="28.9" y="46.9" smashed="yes"> +<attribute name="NAME" x="28.138" y="47.7255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="28.9" y="46.9" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="28.9" y="46.9" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="30.984" y="46.668" size="0.6096" layer="27"/> +</element> +<element name="J3" library="SparkFun-Connectors" package="1X08_NO_SILK" value="" x="24.1" y="35.6" rot="R270"> +<attribute name="PROD_ID" value="CONN-08438" x="24.1" y="35.6" size="1.778" layer="27" rot="R270" display="off"/> +</element> +<element name="R6" library="borkedlabs-passives" package="0805" value="470R" x="5" y="45.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="5.762" y="44.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="5" y="45.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="5" y="45.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="5.616" y="45.732" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="J12" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="80" y="51" smashed="yes"/> +<element name="J14" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="3" y="51"/> +<element name="J15" library="power" package="PWRPAD_3-25MM" value="PWRPADM3" x="3" y="3"/> +<element name="D7" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="27.5" y="24.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="27.5" y="23.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> +</element> +<element name="D2" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="27.5" y="20.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="27.5" y="19.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> +</element> +<element name="D3" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="27.5" y="16.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="27.5" y="15.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> +</element> +<element name="D5" library="passives" package="0805-DIODE" value="1A/23V/620mV" x="27.5" y="12.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="27.5" y="11.738" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center"/> +</element> +<element name="R2" library="borkedlabs-passives" package="0805" value="10k" x="44.1" y="43.9" smashed="yes" rot="R180"> +<attribute name="NAME" x="44.862" y="43.0745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="44.1" y="43.9" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="44.1" y="43.9" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="45.784" y="43.568" size="0.6096" layer="27"/> +</element> +<element name="C8" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="44.1" y="42.6" smashed="yes"> +<attribute name="NAME" x="43.211" y="43.997" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0603" x="44.1" y="42.6" size="0.6096" layer="27" display="off"/> +<attribute name="TYPE" value="" x="44.1" y="42.6" size="0.6096" layer="27" display="off"/> +<attribute name="VALUE" x="45.684" y="42.287" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="44.1" y="42.6" size="0.6096" layer="27" display="off"/> +</element> +<element name="R4" library="power" package="R2512" value="" x="51.4" y="39.5" smashed="yes" rot="R90"> +<attribute name="NAME" x="49.495" y="36.96" size="1.016" layer="25" rot="R90"/> +<attribute name="VALUE" x="54.575" y="36.96" size="1.016" layer="27" rot="R90"/> +</element> +<element name="R5" library="power" package="R2512" value="" x="51.4" y="27" rot="R90"/> +<element name="U$4" library="lights" package="LED0805" value="LED0805" x="2" y="45.5" smashed="yes"> +<attribute name="NAME" x="1.111" y="46.897" size="1.016" layer="25"/> +<attribute name="VALUE" x="-3.816" y="45.087" size="0.6096" layer="27" ratio="10"/> +</element> +<element name="U$5" library="lights" package="LED0805" value="LED0805" x="2" y="42.5" smashed="yes"> +<attribute name="NAME" x="0.811" y="45.797" size="1.016" layer="25"/> +<attribute name="VALUE" x="-3.916" y="42.187" size="0.6096" layer="27" ratio="10"/> +</element> +<element name="R12" library="borkedlabs-passives" package="0805" value="470R" x="5" y="39.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="5.762" y="38.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="5" y="39.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="5" y="39.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="5.216" y="39.732" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="U$8" library="lights" package="LED0805" value="LED0805" x="2" y="39.5" smashed="yes"> +<attribute name="NAME" x="0.811" y="42.297" size="1.016" layer="25"/> +<attribute name="VALUE" x="-3.916" y="39.287" size="0.6096" layer="27" ratio="10"/> +</element> +<element name="J7" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="79" y="34"/> +<element name="J10" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="79" y="24"/> +<element name="J11" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="79" y="14"/> +<element name="BFC1" library="power" package="BFC-8MM" value="BFC8MM" x="57.5" y="51.5" rot="R180"/> +<element name="R7" library="borkedlabs-passives" package="0805" value="120R" x="8" y="17.5" smashed="yes" rot="R180"> +<attribute name="NAME" x="8.762" y="16.6745" size="1.016" layer="25" rot="R180"/> +<attribute name="PACKAGE" value="0805" x="8" y="17.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="PRECISION" value="" x="8" y="17.5" size="1.778" layer="27" rot="R180" display="off"/> +<attribute name="VALUE" x="6.216" y="17.632" size="0.6096" layer="27" rot="R180"/> +</element> +<element name="R9" library="borkedlabs-passives" package="0805" value="120R" x="19" y="17.5" smashed="yes"> +<attribute name="NAME" x="18.238" y="18.3255" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="0805" x="19" y="17.5" size="1.778" layer="27" display="off"/> +<attribute name="PRECISION" value="" x="19" y="17.5" size="1.778" layer="27" display="off"/> +<attribute name="VALUE" x="20.884" y="17.268" size="0.6096" layer="27"/> +</element> +<element name="C10" library="borkedlabs-passives" package="1206" value="10uF" x="43.3" y="26.5" smashed="yes"> +<attribute name="NAME" x="42.03" y="27.643" size="1.016" layer="25"/> +<attribute name="PACKAGE" value="1206" x="43.3" y="26.5" size="0.6096" layer="27" display="off"/> +<attribute name="TYPE" value="" x="43.3" y="26.5" size="0.6096" layer="27" display="off"/> +<attribute name="VALUE" x="38.803" y="26.306" size="0.6096" layer="27"/> +<attribute name="VOLTAGE" value="" x="43.3" y="26.5" size="0.6096" layer="27" display="off"/> +</element> +<element name="C15" library="borkedlabs-passives" package="1206" value="10uF" x="57.6" y="3" smashed="yes" rot="R270"> +<attribute name="NAME" x="58.743" y="4.27" size="1.016" layer="25" rot="R270"/> +<attribute name="PACKAGE" value="1206" x="57.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="57.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +<attribute name="VALUE" x="57.206" y="7.397" size="0.6096" layer="27" rot="R270"/> +<attribute name="VOLTAGE" value="" x="57.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +</element> +<element name="J13" library="SparkFun-Connectors" package="1X04_NO_SILK" value="" x="24.1" y="45.8" rot="R270"> +<attribute name="PROD_ID" value="CONN-09696" x="24.1" y="45.8" size="0.6096" layer="27" rot="R270" display="off"/> +</element> +<element name="C18" library="borkedlabs-passives" package="1206" value="10uF" x="53.6" y="3" smashed="yes" rot="R270"> +<attribute name="NAME" x="54.743" y="4.27" size="1.016" layer="25" rot="R270"/> +<attribute name="PACKAGE" value="1206" x="53.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="53.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +<attribute name="VALUE" x="53.306" y="7.197" size="0.6096" layer="27" rot="R270"/> +<attribute name="VOLTAGE" value="" x="53.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +</element> +<element name="C21" library="borkedlabs-passives" package="1206" value="10uF" x="55.6" y="3" smashed="yes" rot="R270"> +<attribute name="NAME" x="56.743" y="4.27" size="1.016" layer="25" rot="R270"/> +<attribute name="PACKAGE" value="1206" x="55.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="55.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +<attribute name="VALUE" x="55.406" y="7.297" size="0.6096" layer="27" rot="R270"/> +<attribute name="VOLTAGE" value="" x="55.6" y="3" size="0.6096" layer="27" rot="R270" display="off"/> +</element> +<element name="U1" library="microcontrollers" package="QFN-64-9X9MM" value="ATXMEGA_A3UQFN" x="13.9" y="37.6" rot="R180"/> +<element name="J2" library="microcontrollers" package="PDI_2X3_SMD" value="" x="4.5" y="26.5" rot="R90"> +<attribute name="PROD_ID" value="CONN-11290" x="4.5" y="26.5" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +</element> +<element name="Y1" library="passives" package="RES_PRQC" value="RESONATORPQRC" x="14.8" y="30.6"/> +<element name="C9" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="20.1" y="40" rot="R270"> +<attribute name="PACKAGE" value="0603" x="20.1" y="40" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="20.1" y="40" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="20.1" y="40" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="U$1" library="connector" package="FIDUCIAL_1MM" value="FIDUCIAL" x="7.5" y="3"/> +<element name="U$3" library="connector" package="FIDUCIAL_1MM" value="FIDUCIAL" x="75" y="51"/> +<element name="U9" library="sensor" package="SOT23" value="RTD-NI1000SOT" x="53.55" y="48.4" rot="R270"/> +<element name="J5" library="SparkFun-Connectors" package="1X02_LONGPADS" value="" x="64.9" y="2.5" rot="R180"/> +<element name="Q1" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="65.5" y="43.5"/> +<element name="Q2" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="58.5" y="37.5" rot="R270"/> +<element name="Q3" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="58.5" y="30" rot="R270"/> +<element name="Q4" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="72" y="29.5"/> +<element name="Q5" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="58.5" y="9.5" rot="R270"/> +<element name="Q6" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="65.5" y="15.5"/> +<element name="J16" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="79" y="4"/> +<element name="J17" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="79" y="44"/> +<element name="J18" library="power" package="PWRPAD_M3_STANDOFF" value="PWRPADM3-STANDOFF" x="39" y="4"/> +<element name="J1" library="connector" package="RJ45-LED-RJHSE-5381-UPTAB" value="ATK-RS48PHYVERJ45LEDTABUP" x="14.5" y="8.5"/> +<element name="U3" library="comm" package="TSSOP16" value="RS485-2BY2-SN75C1168PWR" x="14" y="22.5"/> +<element name="R1" library="borkedlabs-passives" package="0805" value="120R" x="11.5" y="17.5"> +<attribute name="PACKAGE" value="0805" x="11.5" y="17.5" size="0.6096" layer="27" ratio="10" display="off"/> +<attribute name="PRECISION" value="" x="11.5" y="17.5" size="0.6096" layer="27" ratio="10" display="off"/> +</element> +<element name="R13" library="borkedlabs-passives" package="0805" value="120R" x="15.5" y="17.5"> +<attribute name="PACKAGE" value="0805" x="15.5" y="17.5" size="0.6096" layer="27" ratio="10" display="off"/> +<attribute name="PRECISION" value="" x="15.5" y="17.5" size="0.6096" layer="27" ratio="10" display="off"/> +</element> +<element name="U4" library="power" package="QFN16-3X3-TI-RTE" value="BUCK-TS30011-12-13QFN" x="44.5" y="10.75"/> +<element name="L1" library="power" package="NRS5020T4R7MMGJ" value="" x="44.5" y="15.75"/> +<element name="U5" library="power" package="SOT23-5" value="VREG-AP2112" x="31.5" y="7" rot="R90"/> +<element name="BFC2" library="power" package="BFC-8MM" value="BFC8MM" x="70" y="51.5" rot="R180"/> +<element name="C22" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="47" y="11.05" rot="R90"> +<attribute name="PACKAGE" value="0603" x="47" y="11.05" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +<attribute name="TYPE" value="" x="47" y="11.05" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +<attribute name="VOLTAGE" value="" x="47" y="11.05" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +</element> +<element name="C23" library="borkedlabs-passives" package="1206" value="10uF" x="39.5" y="10.75" rot="R180"> +<attribute name="PACKAGE" value="1206" x="39.5" y="10.75" size="0.6096" layer="27" ratio="10" rot="R180" display="off"/> +<attribute name="TYPE" value="" x="39.5" y="10.75" size="0.6096" layer="27" ratio="10" rot="R180" display="off"/> +<attribute name="VOLTAGE" value="" x="39.5" y="10.75" size="0.6096" layer="27" ratio="10" rot="R180" display="off"/> +</element> +<element name="C27" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="10.7" y="26.8" rot="R90"> +<attribute name="PACKAGE" value="0603" x="10.7" y="26.8" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +<attribute name="TYPE" value="" x="10.7" y="26.8" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +<attribute name="VOLTAGE" value="" x="10.7" y="26.8" size="0.6096" layer="27" ratio="10" rot="R90" display="off"/> +</element> +<element name="C30" library="borkedlabs-passives" package="1206" value="10uF" x="39.9" y="15.75" rot="R270"> +<attribute name="PACKAGE" value="1206" x="39.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="39.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="39.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="C34" library="borkedlabs-passives" package="1206" value="10uF" x="37.9" y="15.75" rot="R270"> +<attribute name="PACKAGE" value="1206" x="37.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="37.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="37.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="C35" library="borkedlabs-passives" package="1206" value="10uF" x="35.9" y="15.75" rot="R270"> +<attribute name="PACKAGE" value="1206" x="35.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="35.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="35.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="C36" library="borkedlabs-passives" package="1206" value="10uF" x="33.9" y="15.75" rot="R270"> +<attribute name="PACKAGE" value="1206" x="33.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="33.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="33.9" y="15.75" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="C37" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="28.8" y="5.1" rot="R270"> +<attribute name="PACKAGE" value="0603" x="28.8" y="5.1" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="28.8" y="5.1" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="28.8" y="5.1" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="C38" library="borkedlabs-passives" package="1206" value="10uF" x="27" y="4.5" rot="R270"> +<attribute name="PACKAGE" value="1206" x="27" y="4.5" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="27" y="4.5" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="27" y="4.5" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> +<element name="J4" library="SparkFun-Connectors" package="1X04_NO_SILK" value="" x="19" y="50.8"> +<attribute name="PROD_ID" value="CONN-09696" x="19" y="50.8" size="0.6096" layer="27" ratio="10" display="off"/> +</element> +<element name="J19" library="SparkFun-Connectors" package="1X04_NO_SILK" value="" x="10.3" y="46.3"> +<attribute name="PROD_ID" value="CONN-09696" x="10.3" y="46.3" size="0.6096" layer="27" ratio="10" display="off"/> +</element> +<element name="R14" library="borkedlabs-passives" package="0805" value="1k" x="28.9" y="48.7"> +<attribute name="PACKAGE" value="0805" x="28.9" y="48.7" size="0.6096" layer="27" ratio="10" display="off"/> +<attribute name="PRECISION" value="" x="28.9" y="48.7" size="0.6096" layer="27" ratio="10" display="off"/> +</element> +<element name="J20" library="SparkFun-Connectors" package="1X01_NO_SILK" value="" x="24.1" y="48.3"/> +<element name="C16" library="borkedlabs-passives" package="0603-CAP" value="0.1uF" x="30.5" y="39.1"> +<attribute name="PACKAGE" value="0603" x="30.5" y="39.1" size="0.6096" layer="27" ratio="10" display="off"/> +<attribute name="TYPE" value="" x="30.5" y="39.1" size="0.6096" layer="27" ratio="10" display="off"/> +<attribute name="VOLTAGE" value="" x="30.5" y="39.1" size="0.6096" layer="27" ratio="10" display="off"/> +</element> +<element name="J21" library="power" package="SL-LINK" value="SL-LINK" x="49.4" y="12.9"/> +<element name="Q7" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="58.5" y="44" rot="R270"/> +<element name="Q8" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="72" y="43.5"/> +<element name="Q9" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="65.5" y="29.5"/> +<element name="Q10" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="58.5" y="23.5" rot="R270"/> +<element name="Q11" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="72" y="15.5"/> +<element name="Q12" library="power" package="DSOP-ADVANCE" value="NFET-TPW4R008NH" x="58.5" y="16" rot="R270"/> +<element name="C5" library="borkedlabs-passives" package="1206" value="10uF" x="59.6" y="3" rot="R270"> +<attribute name="PACKAGE" value="1206" x="59.6" y="3" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="TYPE" value="" x="59.6" y="3" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +<attribute name="VOLTAGE" value="" x="59.6" y="3" size="0.6096" layer="27" ratio="10" rot="R270" display="off"/> +</element> </elements> <signals> <signal name="GND"> @@ -1569,38 +1809,29 @@ design rules under a new name.</description> <contactref element="U2" pad="P$28"/> <contactref element="C20" pad="1"/> <contactref element="R11" pad="2"/> -<contactref element="C44" pad="2"/> -<contactref element="C42" pad="2"/> -<contactref element="C40" pad="2"/> -<via x="68.469" y="49.501" extent="1-16" drill="0.35"/> -<via x="69.739" y="49.501" extent="1-16" drill="0.35"/> -<via x="71.009" y="49.501" extent="1-16" drill="0.35"/> -<via x="68.469" y="48.612" extent="1-16" drill="0.35"/> -<via x="68.469" y="47.723" extent="1-16" drill="0.35"/> -<via x="68.469" y="46.834" extent="1-16" drill="0.35"/> -<via x="68.469" y="45.056" extent="1-16" drill="0.35"/> -<via x="68.469" y="45.945" extent="1-16" drill="0.35"/> -<via x="68.469" y="44.167" extent="1-16" drill="0.35"/> -<via x="69.739" y="48.612" extent="1-16" drill="0.35"/> -<via x="69.739" y="47.723" extent="1-16" drill="0.35"/> -<via x="71.009" y="48.612" extent="1-16" drill="0.35"/> -<via x="71.009" y="47.723" extent="1-16" drill="0.35"/> -<via x="71.009" y="46.834" extent="1-16" drill="0.35"/> -<via x="69.75" y="46.75" extent="1-16" drill="0.35"/> -<via x="69.739" y="45.945" extent="1-16" drill="0.35"/> -<via x="69.739" y="45.056" extent="1-16" drill="0.35"/> -<via x="69.739" y="44.167" extent="1-16" drill="0.35"/> -<via x="71.009" y="45.945" extent="1-16" drill="0.35"/> -<via x="71.009" y="45.056" extent="1-16" drill="0.35"/> -<via x="71.009" y="44.167" extent="1-16" drill="0.35"/> -<contactref element="J9" pad="P$1"/> -<contactref element="C25" pad="2"/> -<contactref element="C16" pad="1"/> +<via x="36.469" y="40.501" extent="1-16" drill="0.35"/> +<via x="37.739" y="40.501" extent="1-16" drill="0.35"/> +<via x="39.009" y="40.501" extent="1-16" drill="0.35"/> +<via x="36.469" y="39.612" extent="1-16" drill="0.35"/> +<via x="36.469" y="38.723" extent="1-16" drill="0.35"/> +<via x="36.469" y="37.834" extent="1-16" drill="0.35"/> +<via x="36.469" y="36.056" extent="1-16" drill="0.35"/> +<via x="36.469" y="36.945" extent="1-16" drill="0.35"/> +<via x="36.469" y="35.167" extent="1-16" drill="0.35"/> +<via x="37.739" y="39.612" extent="1-16" drill="0.35"/> +<via x="37.739" y="38.723" extent="1-16" drill="0.35"/> +<via x="39.009" y="39.612" extent="1-16" drill="0.35"/> +<via x="39.009" y="38.723" extent="1-16" drill="0.35"/> +<via x="39.009" y="37.834" extent="1-16" drill="0.35"/> +<via x="37.75" y="37.75" extent="1-16" drill="0.35"/> +<via x="37.739" y="36.945" extent="1-16" drill="0.35"/> +<via x="37.739" y="36.056" extent="1-16" drill="0.35"/> +<via x="37.739" y="35.167" extent="1-16" drill="0.35"/> +<via x="39.009" y="36.945" extent="1-16" drill="0.35"/> +<via x="39.009" y="36.056" extent="1-16" drill="0.35"/> +<via x="39.009" y="35.167" extent="1-16" drill="0.35"/> <contactref element="C13" pad="1"/> -<wire x1="71.148003125" y1="47.583996875" x2="71.009" y2="47.723" width="0.2032" layer="1"/> -<contactref element="U2" pad="P$44"/> -<via x="60.4" y="50.9" extent="1-16" drill="0.35"/> -<contactref element="C17" pad="1"/> +<wire x1="39.148003125" y1="38.583996875" x2="39.009" y2="38.723" width="0.2032" layer="1"/> <contactref element="C14" pad="1"/> <contactref element="C6" pad="2"/> <contactref element="C4" pad="2"/> @@ -1613,251 +1844,42 @@ design rules under a new name.</description> <contactref element="C45" pad="2"/> <contactref element="C12" pad="2"/> <contactref element="C1" pad="2"/> -<contactref element="R3" pad="2"/> -<contactref element="J3" pad="1"/> -<via x="60.4" y="50.1" extent="1-16" drill="0.35"/> -<via x="60.5" y="42.15" extent="1-16" drill="0.35"/> <contactref element="R2" pad="1"/> <contactref element="C8" pad="2"/> <contactref element="J6" pad="1"/> -<contactref element="R4" pad="A"/> -<contactref element="R5" pad="A"/> <contactref element="R6" pad="1"/> -<contactref element="U$9" pad="PGND"/> -<contactref element="R13" pad="1"/> -<contactref element="BFC1" pad="P$2"/> -<polygon width="0.1524" layer="1" thermals="no"> -<vertex x="72.5" y="37.5"/> -<vertex x="66" y="37.5"/> -<vertex x="66" y="53.75"/> -<vertex x="65.5" y="54"/> -<vertex x="58" y="54"/> -<vertex x="58" y="62.5"/> -<vertex x="75.5" y="62.5"/> -<vertex x="75.5" y="58"/> -<vertex x="70.5" y="58"/> -<vertex x="70.55" y="54"/> -<vertex x="73.75" y="54"/> -<vertex x="73.5" y="53.75"/> -<vertex x="73.5" y="48"/> -<vertex x="72.25" y="48"/> -<vertex x="72.25" y="47"/> -<vertex x="72.5" y="47"/> -</polygon> -<polygon width="0.1524" layer="16" rank="6"> -<vertex x="65.5" y="8.5"/> -<vertex x="65.5" y="37.5"/> -<vertex x="58" y="37.5"/> -<vertex x="58" y="62"/> -<vertex x="101" y="62"/> -<vertex x="101.5" y="8.5"/> -</polygon> -<polygon width="0.1524" layer="16"> -<vertex x="54.5" y="62.5"/> -<vertex x="54.5" y="37"/> -<vertex x="65" y="37"/> -<vertex x="65" y="8.5"/> -<vertex x="30" y="8.25"/> -<vertex x="30" y="62.5"/> -</polygon> -<contactref element="C10" pad="2"/> <contactref element="C15" pad="2"/> -<polygon width="0.2032" layer="1" thermals="no"> -<vertex x="87.3" y="51.7"/> -<vertex x="87.3" y="57.8"/> -<vertex x="79.85" y="57.8"/> -<vertex x="79.85" y="55.8"/> -<vertex x="82.7" y="55.8"/> -<vertex x="82.7" y="52.5"/> -<vertex x="83.5" y="51.7"/> -</polygon> -<wire x1="73.49999375" y1="47.499996875" x2="73.555496875" y2="47.5555" width="0.2032" layer="1"/> -<wire x1="74.662890625" y1="47.74269375" x2="76.76690625" y2="47.74269375" width="0.2032" layer="1"/> -<wire x1="76.76690625" y1="47.74269375" x2="77.9130125" y2="48.8888" width="0.2032" layer="1"/> -<wire x1="73.555496875" y1="47.5555" x2="74.475696875" y2="47.5555" width="0.2032" layer="1"/> -<wire x1="74.475696875" y1="47.5555" x2="74.662890625" y2="47.74269375" width="0.2032" layer="1"/> -<wire x1="77.9130125" y1="48.8888" x2="78.3245875" y2="48.8888" width="0.2032" layer="1"/> -<wire x1="78.3245875" y1="48.8888" x2="79.7" y2="50.2642125" width="0.2032" layer="1"/> -<wire x1="79.7" y1="50.2642125" x2="79.7" y2="51.9912" width="0.2032" layer="1"/> -<wire x1="82.74125" y1="51.9912" x2="82.9198" y2="52.16975" width="0.2032" layer="1"/> -<wire x1="82.9198" y1="52.16975" x2="82.9198" y2="52.3198" width="0.2032" layer="1"/> -<wire x1="82.9198" y1="52.3198" x2="83.4" y2="52.8" width="0.2032" layer="1"/> -<wire x1="79.7" y1="51.9912" x2="82.74125" y2="51.9912" width="0.2032" layer="1"/> -<polygon width="0.2032" layer="1" thermals="no" rank="2"> -<vertex x="81.4" y="42.3"/> -<vertex x="84.6" y="42.3"/> -<vertex x="84.8" y="42.5"/> -<vertex x="85.3" y="42.5"/> -<vertex x="86.4" y="41.4"/> -<vertex x="86.4" y="40.7"/> -<vertex x="86.2" y="40.7"/> -<vertex x="86" y="40.5"/> -<vertex x="84.5" y="39"/> -<vertex x="82" y="39"/> -<vertex x="81.9" y="39"/> -<vertex x="79.8" y="41.1"/> -<vertex x="79.8" y="42"/> -<vertex x="80.1" y="42.3"/> -</polygon> -<polygon width="0.2032" layer="1" thermals="no"> -<vertex x="80.4" y="33.2"/> -<vertex x="84.7" y="33.2"/> -<vertex x="85" y="33.3"/> -<vertex x="87" y="33.3"/> -<vertex x="87" y="27.4"/> -<vertex x="79.6" y="27.4"/> -<vertex x="79.6" y="32.4"/> -</polygon> -<polygon width="0.2032" layer="16" thermals="no" rank="3"> -<vertex x="85.9" y="57"/> -<vertex x="87.3" y="57"/> -<vertex x="87.3" y="52.5"/> -<vertex x="85.9" y="52.5"/> -</polygon> -<via x="87" y="56.5" extent="1-16" drill="0.35"/> -<via x="86.3" y="56.5" extent="1-16" drill="0.35"/> -<via x="82.3" y="29.5" extent="1-16" drill="0.35"/> -<via x="80.7" y="40.7" extent="1-16" drill="0.35"/> -<via x="77.05" y="52.9" extent="1-16" drill="0.35"/> -<via x="76.9" y="51.6" extent="1-16" drill="0.35"/> -<via x="80.9" y="48.7" extent="1-16" drill="0.35"/> -<via x="80.9" y="49.5" extent="1-16" drill="0.35"/> -<via x="81.1" y="59.4" extent="1-16" drill="0.35"/> -<via x="81.1" y="58.6" extent="1-16" drill="0.35"/> +<via x="45.05" y="43.9" extent="1-16" drill="0.35"/> +<via x="44.9" y="42.6" extent="1-16" drill="0.35"/> <contactref element="C18" pad="2"/> <contactref element="C21" pad="2"/> -<polygon width="0.2032" layer="1" thermals="no" rank="3"> -<vertex x="74.8" y="39.3"/> -<vertex x="74.8" y="37.4"/> -<vertex x="74.6" y="37.2"/> -<vertex x="74.6" y="36.5"/> -<vertex x="75" y="36.5"/> -<vertex x="75" y="33.9"/> -<vertex x="74.9" y="33.8"/> -<vertex x="73.3" y="33.8"/> -<vertex x="73.3" y="32.4"/> -<vertex x="75.7" y="32.4"/> -<vertex x="75.9" y="32.6"/> -<vertex x="75.9" y="39.3"/> -</polygon> -<via x="75.2" y="39" extent="1-16" drill="0.35"/> -<via x="75.2" y="38.2" extent="1-16" drill="0.35"/> -<via x="75.2" y="37.3" extent="1-16" drill="0.35"/> -<via x="60.3" y="31.5" extent="1-16" drill="0.35"/> -<via x="63.95" y="31.5" extent="1-16" drill="0.35"/> -<via x="63.95" y="35.5" extent="1-16" drill="0.35"/> -<via x="60.3" y="35.5" extent="1-16" drill="0.35"/> -<via x="60.3" y="27.5" extent="1-16" drill="0.35"/> -<via x="60.3" y="23.5" extent="1-16" drill="0.35"/> -<via x="63.95" y="23.5" extent="1-16" drill="0.35"/> -<via x="63.95" y="27.5" extent="1-16" drill="0.35"/> -<wire x1="56.1" y1="44.6" x2="57.85" y2="44.6" width="0.2032" layer="16"/> -<wire x1="57.85" y1="44.6" x2="58" y2="44.75" width="0.2032" layer="16"/> -<wire x1="56.1" y1="44.6" x2="54.4" y2="44.6" width="0.2032" layer="16"/> -<wire x1="54.4" y1="44.6" x2="54" y2="45" width="0.2032" layer="16"/> -<via x="59.95" y="54.1" extent="1-16" drill="0.35"/> -<via x="68.469" y="52.101" extent="1-16" drill="0.35"/> -<via x="69.739" y="52.101" extent="1-16" drill="0.35"/> -<via x="71.009" y="52.101" extent="1-16" drill="0.35"/> -<via x="68.469" y="51.212" extent="1-16" drill="0.35"/> -<via x="68.469" y="50.323" extent="1-16" drill="0.35"/> -<via x="69.739" y="51.212" extent="1-16" drill="0.35"/> -<via x="69.739" y="50.323" extent="1-16" drill="0.35"/> -<via x="71.009" y="51.212" extent="1-16" drill="0.35"/> -<via x="71.009" y="50.323" extent="1-16" drill="0.35"/> -<wire x1="71.148003125" y1="50.183996875" x2="71.009" y2="50.323" width="0.2032" layer="1"/> -<via x="68.469" y="43.401" extent="1-16" drill="0.35"/> -<via x="69.739" y="43.401" extent="1-16" drill="0.35"/> -<via x="71.009" y="43.401" extent="1-16" drill="0.35"/> -<via x="68.469" y="42.512" extent="1-16" drill="0.35"/> -<via x="68.469" y="41.623" extent="1-16" drill="0.35"/> -<via x="69.739" y="42.512" extent="1-16" drill="0.35"/> -<via x="69.739" y="41.623" extent="1-16" drill="0.35"/> -<via x="71.009" y="42.512" extent="1-16" drill="0.35"/> -<via x="71.009" y="41.623" extent="1-16" drill="0.35"/> -<wire x1="71.148003125" y1="41.483996875" x2="71.009" y2="41.623" width="0.2032" layer="1"/> -<via x="68.069" y="54.501" extent="1-16" drill="0.35"/> -<via x="68.069" y="55.301" extent="1-16" drill="0.35"/> -<via x="68.069" y="56.301" extent="1-16" drill="0.35"/> -<via x="68.069" y="57.101" extent="1-16" drill="0.35"/> -<via x="71.769" y="58.601" extent="1-16" drill="0.35"/> -<via x="72.269" y="60.601" extent="1-16" drill="0.35"/> -<via x="69.969" y="60.601" extent="1-16" drill="0.35"/> -<via x="69.569" y="58.701" extent="1-16" drill="0.35"/> -<via x="67.669" y="60.601" extent="1-16" drill="0.35"/> -<via x="67.069" y="58.701" extent="1-16" drill="0.35"/> -<via x="65.869" y="60.601" extent="1-16" drill="0.35"/> -<via x="65.869" y="58.701" extent="1-16" drill="0.35"/> -<via x="65.869" y="56.101" extent="1-16" drill="0.35"/> -<via x="62.769" y="55.601" extent="1-16" drill="0.35"/> -<via x="60.369" y="59.301" extent="1-16" drill="0.35"/> -<via x="67.969" y="39.123" extent="1-16" drill="0.35"/> -<via x="67.969" y="38.323" extent="1-16" drill="0.35"/> -<via x="69.769" y="39.123" extent="1-16" drill="0.35"/> -<via x="66.369" y="38.323" extent="1-16" drill="0.35"/> -<via x="87" y="55.7" extent="1-16" drill="0.35"/> -<via x="86.3" y="55.7" extent="1-16" drill="0.35"/> -<via x="87" y="54.9" extent="1-16" drill="0.35"/> -<via x="86.3" y="54.9" extent="1-16" drill="0.35"/> -<via x="87" y="54.1" extent="1-16" drill="0.35"/> -<via x="86.3" y="54.1" extent="1-16" drill="0.35"/> -<via x="87" y="53.3" extent="1-16" drill="0.35"/> -<via x="86.3" y="53.3" extent="1-16" drill="0.35"/> -<via x="85.2" y="57.2" extent="1-16" drill="0.35"/> -<via x="83.1" y="57.2" extent="1-16" drill="0.35"/> -<via x="80.5" y="57.2" extent="1-16" drill="0.35"/> -<via x="81.7" y="56.4" extent="1-16" drill="0.35"/> -<via x="84.2" y="55.6" extent="1-16" drill="0.35"/> -<via x="83.1" y="54.2" extent="1-16" drill="0.35"/> -<via x="85.2" y="54.2" extent="1-16" drill="0.35"/> -<via x="84.2" y="53.2" extent="1-16" drill="0.35"/> -<via x="83.1" y="41.6" extent="1-16" drill="0.35"/> -<via x="83.9" y="41.6" extent="1-16" drill="0.35"/> -<via x="84.7" y="41.6" extent="1-16" drill="0.35"/> -<via x="82.3" y="41.6" extent="1-16" drill="0.35"/> -<via x="81.5" y="41.6" extent="1-16" drill="0.35"/> -<via x="81.5" y="40.8" extent="1-16" drill="0.35"/> -<via x="82.3" y="40.8" extent="1-16" drill="0.35"/> -<via x="83.1" y="40.8" extent="1-16" drill="0.35"/> -<via x="83.9" y="40.8" extent="1-16" drill="0.35"/> -<via x="84.7" y="40.8" extent="1-16" drill="0.35"/> -<via x="81.9" y="39.5" extent="1-16" drill="0.35"/> -<via x="84" y="39.5" extent="1-16" drill="0.35"/> -<via x="85.7" y="41.2" extent="1-16" drill="0.35"/> -<via x="83" y="39.9" extent="1-16" drill="0.35"/> -<via x="81.6" y="32.5" extent="1-16" drill="0.35"/> -<via x="82.4" y="32.5" extent="1-16" drill="0.35"/> -<via x="83.2" y="32.5" extent="1-16" drill="0.35"/> -<via x="84" y="32.5" extent="1-16" drill="0.35"/> -<via x="84.8" y="32.5" extent="1-16" drill="0.35"/> -<via x="84" y="31.7" extent="1-16" drill="0.35"/> -<via x="84.8" y="31.7" extent="1-16" drill="0.35"/> -<via x="83.2" y="31.7" extent="1-16" drill="0.35"/> -<via x="82.4" y="31.7" extent="1-16" drill="0.35"/> -<via x="81.6" y="31.7" extent="1-16" drill="0.35"/> -<via x="80.1" y="30.9" extent="1-16" drill="0.35"/> -<via x="80" y="28.4" extent="1-16" drill="0.35"/> -<via x="81.7" y="28.4" extent="1-16" drill="0.35"/> -<via x="81.6" y="30.5" extent="1-16" drill="0.35"/> -<via x="84.8" y="30.5" extent="1-16" drill="0.35"/> -<via x="84.8" y="28.4" extent="1-16" drill="0.35"/> -<via x="86.2" y="28.4" extent="1-16" drill="0.35"/> -<via x="86.2" y="30.5" extent="1-16" drill="0.35"/> -<via x="84" y="29.5" extent="1-16" drill="0.35"/> -<via x="59.7" y="42.15" extent="1-16" drill="0.35"/> -<via x="60.5" y="41.35" extent="1-16" drill="0.35"/> -<via x="59.7" y="41.35" extent="1-16" drill="0.35"/> -<via x="59.6" y="50.1" extent="1-16" drill="0.35"/> -<via x="59.6" y="50.9" extent="1-16" drill="0.35"/> -<wire x1="60.1" y1="40" x2="59.7" y2="40.4" width="0.2032" layer="1"/> -<wire x1="59.7" y1="40.4" x2="59.7" y2="41.35" width="0.2032" layer="1"/> -<contactref element="C7" pad="1"/> -<contactref element="C5" pad="1"/> -<contactref element="C11" pad="1"/> -<contactref element="J1" pad="SHDL1"/> -<contactref element="J1" pad="P$2"/> -<contactref element="J1" pad="P$7"/> -<contactref element="J1" pad="SHDL2"/> +<via x="43.3" y="30" extent="1-16" drill="0.35"/> +<via x="43.3" y="29.2" extent="1-16" drill="0.35"/> +<via x="43.3" y="28.3" extent="1-16" drill="0.35"/> +<via x="36.469" y="43.101" extent="1-16" drill="0.35"/> +<via x="37.739" y="43.101" extent="1-16" drill="0.35"/> +<via x="39.009" y="43.101" extent="1-16" drill="0.35"/> +<via x="36.469" y="42.212" extent="1-16" drill="0.35"/> +<via x="36.469" y="41.323" extent="1-16" drill="0.35"/> +<via x="37.739" y="42.212" extent="1-16" drill="0.35"/> +<via x="37.739" y="41.323" extent="1-16" drill="0.35"/> +<via x="39.009" y="42.212" extent="1-16" drill="0.35"/> +<via x="39.009" y="41.323" extent="1-16" drill="0.35"/> +<wire x1="39.148003125" y1="41.183996875" x2="39.009" y2="41.323" width="0.2032" layer="1"/> +<via x="36.469" y="34.401" extent="1-16" drill="0.35"/> +<via x="37.739" y="34.401" extent="1-16" drill="0.35"/> +<via x="39.009" y="34.401" extent="1-16" drill="0.35"/> +<via x="36.469" y="33.512" extent="1-16" drill="0.35"/> +<via x="36.469" y="32.623" extent="1-16" drill="0.35"/> +<via x="37.739" y="33.512" extent="1-16" drill="0.35"/> +<via x="37.739" y="32.623" extent="1-16" drill="0.35"/> +<via x="39.009" y="33.512" extent="1-16" drill="0.35"/> +<via x="39.009" y="32.623" extent="1-16" drill="0.35"/> +<via x="35.969" y="30.123" extent="1-16" drill="0.35"/> +<via x="35.969" y="29.323" extent="1-16" drill="0.35"/> +<via x="37.769" y="30.123" extent="1-16" drill="0.35"/> +<via x="27.8" y="33.15" extent="1-16" drill="0.35"/> +<via x="27.8" y="32.35" extent="1-16" drill="0.35"/> <contactref element="J2" pad="6"/> <contactref element="S1" pad="P$2"/> <contactref element="U1" pad="44"/> @@ -1869,49 +1891,256 @@ design rules under a new name.</description> <contactref element="U1" pad="34"/> <contactref element="Y1" pad="2"/> <contactref element="C9" pad="2"/> -<via x="38.45" y="53.5" extent="1-16" drill="0.3"/> -<via x="39.75" y="50.8" extent="1-16" drill="0.3"/> -<via x="40.9" y="54.9" extent="1-16" drill="0.3"/> -<via x="43.5" y="49" extent="1-16" drill="0.3"/> -<via x="43.5" y="44.5" extent="1-16" drill="0.3"/> -<via x="45.5" y="46.5" extent="1-16" drill="0.3"/> -<via x="48" y="49" extent="1-16" drill="0.3"/> -<via x="48" y="44.5" extent="1-16" drill="0.3"/> -<wire x1="41.4" y1="49.85" x2="42.65" y2="49.85" width="0.1524" layer="1"/> -<wire x1="42.65" y1="49.85" x2="43.5" y2="49" width="0.1524" layer="1"/> -<wire x1="46.15" y1="51.1" x2="46.15" y2="49.85" width="0.1524" layer="1"/> -<wire x1="46.15" y1="49.85" x2="47" y2="49" width="0.1524" layer="1"/> -<wire x1="47" y1="49" x2="48" y2="49" width="0.1524" layer="1"/> -<wire x1="50.4" y1="49.35" x2="48.35" y2="49.35" width="0.1524" layer="1"/> -<wire x1="48.35" y1="49.35" x2="48" y2="49" width="0.1524" layer="1"/> -<wire x1="47.65" y1="42.1" x2="47.65" y2="44.15" width="0.1524" layer="1"/> -<wire x1="47.65" y1="44.15" x2="48" y2="44.5" width="0.1524" layer="1"/> -<wire x1="43.65" y1="42.1" x2="43.65" y2="44.35" width="0.1524" layer="1"/> -<wire x1="43.65" y1="44.35" x2="43.5" y2="44.5" width="0.1524" layer="1"/> -<wire x1="41.4" y1="44.85" x2="43.15" y2="44.85" width="0.1524" layer="1"/> -<wire x1="43.15" y1="44.85" x2="43.5" y2="44.5" width="0.1524" layer="1"/> -<via x="37.6" y="44.4" extent="1-16" drill="0.3"/> -<via x="47.2" y="53.2" extent="1-16" drill="0.3"/> -<via x="50" y="56" extent="1-16" drill="0.3"/> -<via x="50" y="57.7" extent="1-16" drill="0.3"/> -<via x="50" y="59.5" extent="1-16" drill="0.3"/> -<wire x1="55.96" y1="61.086" x2="54.014" y2="61.086" width="0.1524" layer="1"/> -<wire x1="54.014" y1="61.086" x2="54" y2="61.1" width="0.1524" layer="1"/> -<via x="54" y="61.1" extent="1-16" drill="0.3"/> -<wire x1="41.5" y1="56.725" x2="41.5" y2="55.5" width="0.1524" layer="1"/> -<wire x1="41.5" y1="55.5" x2="40.9" y2="54.9" width="0.1524" layer="1"/> -<via x="52.1" y="48.2" extent="1-16" drill="0.3"/> -<via x="50.7" y="39.8" extent="1-16" drill="0.3"/> -<via x="46.8" y="39.6" extent="1-16" drill="0.3"/> -<via x="41.85" y="14.5" extent="1-16" drill="0.3"/> -<via x="46.96" y="29.65" extent="1-16" drill="0.3"/> -<via x="42.2" y="39.9" extent="1-16" drill="0.3"/> -<wire x1="81.1" y1="59.4" x2="81.45" y2="59.05" width="0" layer="19" extent="1-1"/> -<wire x1="45.9" y1="46.6" x2="45.5" y2="46.5" width="0" layer="19" extent="1-1"/> -<wire x1="81.25" y1="49.05" x2="80.9" y2="48.7" width="0" layer="19" extent="1-1"/> -<wire x1="60" y1="50.45" x2="59.6" y2="50.1" width="0" layer="19" extent="1-1"/> -<wire x1="60.1" y1="41.75" x2="59.7" y2="41.35" width="0" layer="19" extent="1-1"/> -<wire x1="60" y1="48.7" x2="59.6" y2="50.1" width="0" layer="19" extent="1-1"/> +<via x="11.5" y="40" extent="1-16" drill="0.3"/> +<via x="11.5" y="35.5" extent="1-16" drill="0.3"/> +<via x="13.5" y="37.5" extent="1-16" drill="0.3"/> +<via x="16" y="40" extent="1-16" drill="0.3"/> +<via x="16" y="35.5" extent="1-16" drill="0.3"/> +<wire x1="9.4" y1="40.85" x2="10.65" y2="40.85" width="0.1524" layer="1"/> +<wire x1="10.65" y1="40.85" x2="11.5" y2="40" width="0.1524" layer="1"/> +<wire x1="14.15" y1="42.1" x2="14.15" y2="40.85" width="0.1524" layer="1"/> +<wire x1="14.15" y1="40.85" x2="15" y2="40" width="0.1524" layer="1"/> +<wire x1="15" y1="40" x2="16" y2="40" width="0.1524" layer="1"/> +<wire x1="18.4" y1="40.35" x2="16.35" y2="40.35" width="0.1524" layer="1"/> +<wire x1="16.35" y1="40.35" x2="16" y2="40" width="0.1524" layer="1"/> +<wire x1="15.65" y1="33.1" x2="15.65" y2="35.15" width="0.1524" layer="1"/> +<wire x1="15.65" y1="35.15" x2="16" y2="35.5" width="0.1524" layer="1"/> +<wire x1="11.65" y1="33.1" x2="11.65" y2="35.35" width="0.1524" layer="1"/> +<wire x1="11.65" y1="35.35" x2="11.5" y2="35.5" width="0.1524" layer="1"/> +<wire x1="9.4" y1="35.85" x2="11.15" y2="35.85" width="0.1524" layer="1"/> +<wire x1="11.15" y1="35.85" x2="11.5" y2="35.5" width="0.1524" layer="1"/> +<via x="20.1" y="39.2" extent="1-16" drill="0.3"/> +<contactref element="J5" pad="2"/> +<contactref element="U4" pad="4"/> +<contactref element="U4" pad="TH"/> +<contactref element="U4" pad="15"/> +<contactref element="U4" pad="14"/> +<contactref element="C23" pad="2"/> +<contactref element="U5" pad="2"/> +<contactref element="C37" pad="2"/> +<contactref element="C38" pad="2"/> +<contactref element="U3" pad="8"/> +<contactref element="C27" pad="2"/> +<contactref element="J4" pad="4"/> +<contactref element="J4" pad="3"/> +<contactref element="J4" pad="2"/> +<contactref element="J4" pad="1"/> +<contactref element="R3" pad="1"/> +<contactref element="R14" pad="1"/> +<contactref element="C16" pad="1"/> +<via x="29.7" y="39.1" extent="1-16" drill="0.35"/> +<via x="27.7" y="40.4" extent="1-16" drill="0.35"/> +<via x="27.7" y="41.2" extent="1-16" drill="0.35"/> +<contactref element="C10" pad="2"/> +<contactref element="J9" pad="P$1"/> +<contactref element="BFC1" pad="P$2"/> +<contactref element="BFC2" pad="P$2"/> +<via x="43.3" y="27.5" extent="1-16" drill="0.35"/> +<via x="43.3" y="26.7" extent="1-16" drill="0.35"/> +<via x="43.3" y="25.9" extent="1-16" drill="0.35"/> +<via x="11.7" y="27.5" extent="1-16" drill="0.3"/> +<via x="11.3" y="29.6" extent="1-16" drill="0.3"/> +<polygon width="0.0762" layer="16" rank="6"> +<vertex x="-1" y="59"/> +<vertex x="89" y="59"/> +<vertex x="89" y="-8"/> +<vertex x="-1" y="-8"/> +</polygon> +<polygon width="0.0762" layer="1" rank="6"> +<vertex x="-2" y="60"/> +<vertex x="90" y="60"/> +<vertex x="90" y="-9"/> +<vertex x="-2" y="-9"/> +</polygon> +<contactref element="C36" pad="2"/> +<contactref element="C35" pad="2"/> +<contactref element="C34" pad="2"/> +<contactref element="C30" pad="2"/> +<wire x1="43.025" y1="10" x2="43.75" y2="10" width="0.2032" layer="1"/> +<wire x1="43.75" y1="10" x2="44.1" y2="10.35" width="0.2032" layer="1"/> +<wire x1="44.1" y1="10.35" x2="44.4" y2="10.65" width="0.2032" layer="1"/> +<wire x1="44.4" y1="10.65" x2="44.5" y2="10.75" width="0.2032" layer="1"/> +<wire x1="44.25" y1="12.225" x2="44.25" y2="10.8" width="0.2032" layer="1"/> +<wire x1="44.25" y1="10.8" x2="44.4" y2="10.65" width="0.2032" layer="1"/> +<wire x1="44.75" y1="12.225" x2="44.75" y2="11" width="0.2032" layer="1"/> +<wire x1="44.75" y1="11" x2="44.5" y2="10.75" width="0.2032" layer="1"/> +<via x="44.1" y="10.35" extent="1-16" drill="0.3"/> +<via x="44.1" y="11.15" extent="1-16" drill="0.3"/> +<via x="44.9" y="11.15" extent="1-16" drill="0.3"/> +<via x="44.9" y="10.35" extent="1-16" drill="0.3"/> +<wire x1="28.8" y1="4.3" x2="28.3" y2="4.3" width="0.508" layer="1"/> +<wire x1="27.1" y1="3.1" x2="27" y2="3.1" width="0.508" layer="1"/> +<wire x1="28.3" y1="4.3" x2="27.1" y2="3.1" width="0.508" layer="1"/> +<contactref element="Q5" pad="P$3"/> +<contactref element="Q5" pad="P$2"/> +<contactref element="Q5" pad="P$1"/> +<contactref element="J21" pad="2"/> +<contactref element="R4" pad="B"/> +<contactref element="R5" pad="B"/> +<contactref element="Q12" pad="P$1"/> +<contactref element="Q12" pad="P$2"/> +<contactref element="Q12" pad="P$3"/> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="56.5" y="19.2"/> +<vertex x="49.5" y="19.2"/> +<vertex x="49.5" y="5.5"/> +<vertex x="56.5" y="5.5"/> +</polygon> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="53.2" y="30.9"/> +<vertex x="53.2" y="28.7"/> +<vertex x="49.6" y="28.7"/> +<vertex x="49.6" y="30.9"/> +</polygon> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="49.6" y="43.4"/> +<vertex x="53.2" y="43.4"/> +<vertex x="53.2" y="41.2"/> +<vertex x="49.6" y="41.2"/> +</polygon> +<via x="52.5" y="18.5" extent="1-16" drill="0.3"/> +<via x="49.9" y="30.8" extent="1-16" drill="0.3"/> +<via x="49.2" y="42" extent="1-16" drill="0.3"/> +<wire x1="32.806" y1="7" x2="33.8" y2="7" width="0.2032" layer="1"/> +<via x="33.8" y="7" extent="1-16" drill="0.3"/> +<contactref element="C5" pad="2"/> +<via x="17.4" y="19.3" extent="1-16" drill="0.3"/> +<via x="17.2" y="37.6" extent="1-16" drill="0.3"/> +<via x="10.6" y="34.3" extent="1-16" drill="0.3"/> +<via x="16.3" y="45.1" extent="1-16" drill="0.3"/> +<via x="18.8" y="45" extent="1-16" drill="0.3"/> +<via x="21.9" y="43.9" extent="1-16" drill="0.3"/> +<via x="19.4" y="37.9" extent="1-16" drill="0.3"/> +<via x="19.5" y="36.2" extent="1-16" drill="0.3"/> +<via x="19.9" y="31.5" extent="1-16" drill="0.3"/> +<via x="15.9" y="32" extent="1-16" drill="0.3"/> +<via x="15.4" y="29" extent="1-16" drill="0.3"/> +<via x="13.1" y="29" extent="1-16" drill="0.3"/> +<via x="10.2" y="30.7" extent="1-16" drill="0.3"/> +<via x="8.7" y="33.1" extent="1-16" drill="0.3"/> +<via x="7.4" y="32.1" extent="1-16" drill="0.3"/> +<via x="7.1" y="34.5" extent="1-16" drill="0.3"/> +<via x="7" y="40.4" extent="1-16" drill="0.3"/> +<via x="8.7" y="43.3" extent="1-16" drill="0.3"/> +<via x="25.8" y="36.8" extent="1-16" drill="0.3"/> +<via x="11.5" y="17.1" extent="1-16" drill="0.3"/> +<via x="31.4" y="34.2" extent="1-16" drill="0.3"/> +<via x="31.5" y="29.9" extent="1-16" drill="0.3"/> +<via x="34.2" y="30.1" extent="1-16" drill="0.3"/> +<via x="42.9" y="32.4" extent="1-16" drill="0.3"/> +<via x="45.1" y="30.1" extent="1-16" drill="0.3"/> +<via x="46" y="22.5" extent="1-16" drill="0.3"/> +<via x="47.3" y="21.9" extent="1-16" drill="0.3"/> +<via x="44.8" y="20.5" extent="1-16" drill="0.3"/> +<via x="37.6" y="23.3" extent="1-16" drill="0.3"/> +<via x="32.9" y="15.8" extent="1-16" drill="0.3"/> +<via x="33" y="12" extent="1-16" drill="0.3"/> +<via x="27.8" y="7.4" extent="1-16" drill="0.3"/> +<via x="26" y="9.3" extent="1-16" drill="0.3"/> +<via x="29.2" y="19.5" extent="1-16" drill="0.3"/> +<via x="25.5" y="21.6" extent="1-16" drill="0.3"/> +<via x="25.5" y="28.9" extent="1-16" drill="0.3"/> +<via x="25.4" y="34.3" extent="1-16" drill="0.3"/> +<via x="47.7" y="8.3" extent="1-16" drill="0.3"/> +<via x="51" y="1" extent="1-16" drill="0.3"/> +<via x="44" y="1" extent="1-16" drill="0.3"/> +<via x="25.8" y="47.1" extent="1-16" drill="0.3"/> +<via x="26.2" y="49" extent="1-16" drill="0.3"/> +<via x="31.3" y="53.1" extent="1-16" drill="0.3"/> +<via x="8.6" y="53" extent="1-16" drill="0.3"/> +<via x="1.1" y="47.9" extent="1-16" drill="0.3"/> +<via x="6.8" y="48.7" extent="1-16" drill="0.3"/> +<via x="9.1" y="50.4" extent="1-16" drill="0.3"/> +<via x="14.7" y="49" extent="1-16" drill="0.3"/> +<via x="7.1" y="45.6" extent="1-16" drill="0.3"/> +<via x="2.1" y="38.3" extent="1-16" drill="0.3"/> +<via x="3.5" y="29.2" extent="1-16" drill="0.3"/> +<via x="0.9" y="22.8" extent="1-16" drill="0.3"/> +<via x="4.5" y="13.8" extent="1-16" drill="0.3"/> +<via x="2.8" y="18.8" extent="1-16" drill="0.3"/> +<via x="2.7" y="16.6" extent="1-16" drill="0.3"/> +<via x="0.9" y="6.3" extent="1-16" drill="0.3"/> +<via x="7.2" y="1" extent="1-16" drill="0.3"/> +<via x="11.8" y="14.8" extent="1-16" drill="0.3"/> +<via x="13.95" y="11.95" extent="1-16" drill="0.3"/> +<via x="13.95" y="16.15" extent="1-16" drill="0.3"/> +<via x="11.8" y="12.15" extent="1-16" drill="0.3"/> +<via x="9.45" y="13.8" extent="1-16" drill="0.3"/> +<via x="17.2" y="16.3" extent="1-16" drill="0.3"/> +<via x="20.25" y="14.35" extent="1-16" drill="0.3"/> +<via x="15.05" y="7.5" extent="1-16" drill="0.3"/> +<via x="10.5" y="8.55" extent="1-16" drill="0.3"/> +<via x="16.25" y="12.8" extent="1-16" drill="0.3"/> +<via x="17.4" y="28.7" extent="1-16" drill="0.3"/> +<via x="21.1" y="24.2" extent="1-16" drill="0.3"/> +<via x="24.2" y="2.7" extent="1-16" drill="0.3"/> +<via x="6.6" y="20.1" extent="1-16" drill="0.3"/> +<via x="52.7" y="41.3" extent="1-16" drill="0.3"/> +<via x="52.7" y="40.6" extent="1-16" drill="0.3"/> +<via x="45.7" y="39.9" extent="1-16" drill="0.3"/> +<via x="46.9" y="40.1" extent="1-16" drill="0.3"/> +<via x="48.2" y="38.8" extent="1-16" drill="0.3"/> +<via x="48.2" y="41" extent="1-16" drill="0.3"/> +<via x="52" y="41.3" extent="1-16" drill="0.3"/> +<via x="52" y="40.6" extent="1-16" drill="0.3"/> +<via x="51.3" y="40.6" extent="1-16" drill="0.3"/> +<via x="51.3" y="41.3" extent="1-16" drill="0.3"/> +<via x="51.3" y="42" extent="1-16" drill="0.3"/> +<via x="52" y="42" extent="1-16" drill="0.3"/> +<via x="52.7" y="42" extent="1-16" drill="0.3"/> +<via x="52.7" y="42.7" extent="1-16" drill="0.3"/> +<via x="52" y="42.7" extent="1-16" drill="0.3"/> +<via x="51.3" y="42.7" extent="1-16" drill="0.3"/> +<via x="50.6" y="42.7" extent="1-16" drill="0.3"/> +<via x="50.6" y="42" extent="1-16" drill="0.3"/> +<via x="49.2" y="41" extent="1-16" drill="0.3"/> +<via x="48.2" y="40.1" extent="1-16" drill="0.3"/> +<via x="50.6" y="30.8" extent="1-16" drill="0.3"/> +<via x="51.3" y="30.8" extent="1-16" drill="0.3"/> +<via x="52" y="30.8" extent="1-16" drill="0.3"/> +<via x="52.7" y="30.8" extent="1-16" drill="0.3"/> +<via x="52.7" y="30.1" extent="1-16" drill="0.3"/> +<via x="52" y="30.1" extent="1-16" drill="0.3"/> +<via x="51.3" y="30.1" extent="1-16" drill="0.3"/> +<via x="50.6" y="30.1" extent="1-16" drill="0.3"/> +<via x="49.9" y="30.1" extent="1-16" drill="0.3"/> +<via x="50.6" y="29.4" extent="1-16" drill="0.3"/> +<via x="51.3" y="29.4" extent="1-16" drill="0.3"/> +<via x="52" y="29.4" extent="1-16" drill="0.3"/> +<via x="52.7" y="29.4" extent="1-16" drill="0.3"/> +<via x="52.7" y="27.7" extent="1-16" drill="0.3"/> +<via x="51" y="27.7" extent="1-16" drill="0.3"/> +<via x="51.1" y="32.4" extent="1-16" drill="0.3"/> +<via x="49.3" y="32.4" extent="1-16" drill="0.3"/> +<via x="49.3" y="28.9" extent="1-16" drill="0.3"/> +<via x="43.9" y="45.8" extent="1-16" drill="0.3"/> +<via x="32.4" y="43.8" extent="1-16" drill="0.3"/> +<via x="30.9" y="46.8" extent="1-16" drill="0.3"/> +<via x="42.4" y="50.8" extent="1-16" drill="0.3"/> +<via x="51.5" y="18.5" extent="1-16" drill="0.3"/> +<via x="50.5" y="18.5" extent="1-16" drill="0.3"/> +<via x="50" y="17.5" extent="1-16" drill="0.3"/> +<via x="51" y="17.5" extent="1-16" drill="0.3"/> +<via x="52" y="17.5" extent="1-16" drill="0.3"/> +<via x="51.5" y="16.5" extent="1-16" drill="0.3"/> +<via x="50.5" y="16.5" extent="1-16" drill="0.3"/> +<via x="52.5" y="16.5" extent="1-16" drill="0.3"/> +<via x="52" y="15.5" extent="1-16" drill="0.3"/> +<via x="51" y="15.5" extent="1-16" drill="0.3"/> +<via x="52.5" y="12" extent="1-16" drill="0.3"/> +<via x="51.5" y="12" extent="1-16" drill="0.3"/> +<via x="50.5" y="12" extent="1-16" drill="0.3"/> +<via x="50" y="11" extent="1-16" drill="0.3"/> +<via x="51" y="11" extent="1-16" drill="0.3"/> +<via x="52" y="11" extent="1-16" drill="0.3"/> +<via x="51.5" y="10" extent="1-16" drill="0.3"/> +<via x="50.5" y="10" extent="1-16" drill="0.3"/> +<via x="52.5" y="10" extent="1-16" drill="0.3"/> +<via x="52" y="9" extent="1-16" drill="0.3"/> +<via x="51" y="9" extent="1-16" drill="0.3"/> +<via x="50" y="15.5" extent="1-16" drill="0.3"/> +<via x="52.5" y="7.5" extent="1-16" drill="0.3"/> +<wire x1="13.9" y1="37.6" x2="13.5" y2="37.5" width="0" layer="19" extent="1-1"/> </signal> <signal name="+3V3"> <contactref element="U2" pad="P$24"/> @@ -1920,7 +2149,6 @@ design rules under a new name.</description> <contactref element="C3" pad="1"/> <contactref element="C2" pad="1"/> <contactref element="J6" pad="2"/> -<contactref element="L1" pad="2"/> <contactref element="C1" pad="1"/> <contactref element="J3" pad="2"/> <contactref element="D7" pad="2"/> @@ -1928,49 +2156,15 @@ design rules under a new name.</description> <contactref element="D3" pad="2"/> <contactref element="D5" pad="2"/> <contactref element="R10" pad="2"/> -<contactref element="R14" pad="2"/> <contactref element="U$5" pad="1"/> <contactref element="U$8" pad="1"/> <contactref element="U$4" pad="1"/> -<polygon width="0.2032" layer="1"> -<vertex x="54.5" y="63"/> -<vertex x="54.5" y="37"/> -<vertex x="65" y="37"/> -<vertex x="65" y="8"/> -<vertex x="29.5" y="7.75"/> -<vertex x="29" y="63" curve="-2.445754"/> -</polygon> -<wire x1="66.000009375" y1="42.000009375" x2="64.362803125" y2="42.000009375" width="0.2032" layer="1"/> -<wire x1="64.362803125" y1="42.000009375" x2="64.2306" y2="41.86780625" width="0.2032" layer="1"/> -<via x="64.2306" y="41.86780625" extent="1-16" drill="0.35"/> -<wire x1="64.2306" y1="41.86780625" x2="62.76279375" y2="40.4" width="0.2032" layer="16"/> -<wire x1="57.76" y1="40.4" x2="56.1" y2="42.06" width="0.2032" layer="16"/> -<wire x1="62.76279375" y1="40.4" x2="57.76" y2="40.4" width="0.2032" layer="16"/> -<wire x1="86.3" y1="32.75" x2="87" y2="32.05" width="0.2032" layer="1"/> -<wire x1="87" y1="27.4" x2="86.9" y2="27.3" width="0.2032" layer="1"/> -<via x="79.4306" y="27.4" extent="1-16" drill="0.35"/> -<wire x1="81.93105" y1="27.3" x2="81.82625" y2="27.1952" width="0.2032" layer="1"/> -<wire x1="81.82625" y1="27.1952" x2="79.6354" y2="27.1952" width="0.2032" layer="1"/> -<wire x1="86.9" y1="27.3" x2="81.93105" y2="27.3" width="0.2032" layer="1"/> -<wire x1="79.6354" y1="27.1952" x2="79.4306" y2="27.4" width="0.2032" layer="1"/> -<wire x1="79.4306" y1="27.4" x2="75.748425" y2="27.4" width="0.2032" layer="16"/> -<wire x1="75.748425" y1="27.4" x2="75.010025" y2="26.6616" width="0.2032" layer="16"/> -<wire x1="72.46186875" y1="26.21" x2="72.21" y2="26.21" width="0.2032" layer="16"/> -<wire x1="72.21" y1="26.21" x2="72.2" y2="26.2" width="0.2032" layer="16"/> -<wire x1="72.91346875" y1="26.6616" x2="72.46186875" y2="26.21" width="0.2032" layer="16"/> -<wire x1="75.010025" y1="26.6616" x2="72.91346875" y2="26.6616" width="0.2032" layer="16"/> -<wire x1="87" y1="32.05" x2="87" y2="27.4" width="0.2032" layer="1"/> -<wire x1="59.95" y1="52.35" x2="58.5322" y2="53.7678" width="0.2032" layer="1"/> -<wire x1="58.5322" y1="53.7678" x2="58.5322" y2="54.12793125" width="0.2032" layer="1"/> -<wire x1="58.5322" y1="54.12793125" x2="56.56013125" y2="56.1" width="0.2032" layer="1"/> -<wire x1="56.56013125" y1="56.1" x2="54.2" y2="56.1" width="0.2032" layer="1"/> -<contactref element="C7" pad="2"/> -<contactref element="C5" pad="2"/> -<contactref element="C11" pad="2"/> -<contactref element="J1" pad="P$4"/> -<contactref element="J1" pad="YLWP"/> -<contactref element="J1" pad="P$5"/> -<contactref element="J1" pad="GRNP"/> +<wire x1="34.000009375" y1="33.000009375" x2="32.362803125" y2="33.000009375" width="0.2032" layer="1"/> +<wire x1="32.362803125" y1="33.000009375" x2="32.2306" y2="32.86780625" width="0.2032" layer="1"/> +<via x="32.2306" y="32.86780625" extent="1-16" drill="0.35"/> +<wire x1="32.2306" y1="32.86780625" x2="30.76279375" y2="31.4" width="0.2032" layer="16"/> +<wire x1="25.76" y1="31.4" x2="24.1" y2="33.06" width="0.2032" layer="16"/> +<wire x1="30.76279375" y1="31.4" x2="25.76" y2="31.4" width="0.2032" layer="16"/> <contactref element="J2" pad="2"/> <contactref element="U1" pad="45"/> <contactref element="U1" pad="53"/> @@ -1979,45 +2173,181 @@ design rules under a new name.</description> <contactref element="U1" pad="15"/> <contactref element="U1" pad="61"/> <contactref element="C9" pad="1"/> -<via x="63" y="23.8" extent="1-16" drill="0.3"/> -<wire x1="54.2" y1="56.1" x2="54.1" y2="56.1" width="0.2032" layer="1"/> -<wire x1="65.4" y1="26.2" x2="64.5064" y2="25.3064" width="0.2032" layer="16"/> -<wire x1="64.5064" y1="25.3064" x2="64.5064" y2="25.26953125" width="0.2032" layer="16"/> -<wire x1="64.5064" y1="25.26953125" x2="64.18046875" y2="24.9436" width="0.2032" layer="16"/> -<wire x1="64.18046875" y1="24.9436" x2="64.1436" y2="24.9436" width="0.2032" layer="16"/> -<wire x1="64.1436" y1="24.9436" x2="63" y2="23.8" width="0.2032" layer="16"/> -<wire x1="72.2" y1="26.2" x2="65.4" y2="26.2" width="0.2032" layer="16"/> -<wire x1="56.1" y1="42.06" x2="55.06" y2="43.1" width="0.2032" layer="1"/> -<wire x1="55.06" y1="43.1" x2="54" y2="43.1" width="0.2032" layer="1"/> -<via x="54" y="43.1" extent="1-16" drill="0.3"/> -<wire x1="54" y1="43.1" x2="54" y2="41.3" width="0.2032" layer="16"/> -<wire x1="54" y1="41.3" x2="52.4" y2="39.7" width="0.2032" layer="16"/> -<via x="52.4" y="39.7" extent="1-16" drill="0.3"/> +<contactref element="C12" pad="1"/> +<contactref element="U1" pad="62"/> +<wire x1="17.1" y1="31.5" x2="17.1" y2="32.1" width="0.1524" layer="1"/> +<wire x1="16.65" y1="32.55" x2="16.65" y2="33.1" width="0.1524" layer="1"/> +<wire x1="17.1" y1="32.1" x2="16.65" y2="32.55" width="0.1524" layer="1"/> +<wire x1="17.1" y1="31.5" x2="17.05" y2="31.45" width="0.1524" layer="1"/> +<contactref element="U5" pad="5"/> +<contactref element="C37" pad="1"/> +<contactref element="C38" pad="1"/> +<contactref element="J1" pad="YLWP"/> +<contactref element="J1" pad="GRNP"/> +<contactref element="U3" pad="4"/> +<contactref element="U3" pad="12"/> +<contactref element="U9" pad="1"/> +<wire x1="14.375" y1="25.55" x2="14.375" y2="22.875" width="0.2032" layer="1"/> +<wire x1="14.375" y1="22.875" x2="13.7" y2="22.2" width="0.2032" layer="1"/> +<wire x1="13.7" y1="22.2" x2="13.7" y2="19.675" width="0.2032" layer="1"/> +<wire x1="13.7" y1="19.675" x2="13.725" y2="19.65" width="0.2032" layer="1"/> +<wire x1="8.15" y1="35.35" x2="8" y2="35.5" width="0.2032" layer="1"/> +<wire x1="8.15" y1="35.35" x2="9.4" y2="35.35" width="0.2032" layer="1"/> +<wire x1="16.15" y1="33.1" x2="16.65" y2="33.1" width="0.2032" layer="1"/> +<wire x1="9.4" y1="40.35" x2="8.1" y2="40.35" width="0.2032" layer="1"/> +<wire x1="8.1" y1="40.35" x2="8.05" y2="40.4" width="0.2032" layer="1"/> +<wire x1="13.65" y1="42.1" x2="13.65" y2="44.15" width="0.2032" layer="1"/> +<wire x1="13.65" y1="44.15" x2="13.6" y2="44.2" width="0.2032" layer="1"/> +<wire x1="20.1" y1="40.8" x2="20.05" y2="40.85" width="0.2032" layer="1"/> +<wire x1="20.05" y1="40.85" x2="18.4" y2="40.85" width="0.2032" layer="1"/> +<wire x1="12.15" y1="33.1" x2="12.15" y2="32.15" width="0.2032" layer="1"/> +<wire x1="12.15" y1="32.15" x2="12.3" y2="32" width="0.2032" layer="1"/> +<wire x1="8.6" y1="47.3" x2="9.3" y2="48" width="0.2032" layer="1"/> +<wire x1="9.3" y1="48" x2="9.3" y2="48.925" width="0.2032" layer="1"/> +<wire x1="27" y1="5.9" x2="28.8" y2="5.9" width="0.508" layer="1"/> +<wire x1="30.194" y1="6.05" x2="28.95" y2="6.05" width="0.508" layer="1"/> +<wire x1="28.95" y1="6.05" x2="28.8" y2="5.9" width="0.508" layer="1"/> +<wire x1="27" y1="5.9" x2="26.7" y2="6.2" width="0.3048" layer="1"/> +<wire x1="26.7" y1="6.2" x2="26.7" y2="7.2" width="0.3048" layer="1"/> +<via x="26.7" y="7.2" extent="1-16" drill="0.3"/> +<wire x1="26.7" y1="7.2" x2="26.7" y2="12.5" width="0.3048" layer="16"/> +<via x="26.5" y="12.5" extent="1-16" drill="0.3"/> +<via x="26.6" y="16.5" extent="1-16" drill="0.3"/> +<via x="26.6" y="20.5" extent="1-16" drill="0.3"/> +<via x="26.6" y="24.5" extent="1-16" drill="0.3"/> +<wire x1="26.7" y1="12.5" x2="26.7" y2="16.4" width="0.3048" layer="16"/> +<wire x1="26.7" y1="16.4" x2="26.7" y2="24.5" width="0.3048" layer="16"/> +<wire x1="26.7" y1="7.2" x2="25.2" y2="8.7" width="0.3048" layer="16"/> +<wire x1="20.2" y1="19.4" x2="20.2" y2="19.5" width="0.3048" layer="16"/> +<via x="20.2" y="19.5" extent="1-16" drill="0.3"/> +<wire x1="20.2" y1="19.5" x2="20.2" y2="19.6" width="0.3048" layer="1"/> +<wire x1="20.2" y1="19.6" x2="20.2" y2="27" width="0.3048" layer="1"/> +<wire x1="17.1" y1="30.1" x2="17.1" y2="31.5" width="0.3048" layer="1"/> +<via x="17.1" y="31.5" extent="1-16" drill="0.3"/> +<wire x1="25.2" y1="8.7" x2="25.2" y2="14.4" width="0.3048" layer="16"/> +<wire x1="25.2" y1="14.4" x2="20.2" y2="19.4" width="0.3048" layer="16"/> +<wire x1="20.2" y1="27" x2="17.4" y2="29.8" width="0.3048" layer="1"/> +<wire x1="17.4" y1="29.8" x2="17.1" y2="30.1" width="0.3048" layer="1"/> +<wire x1="14.375" y1="25.55" x2="14.375" y2="26.775" width="0.2032" layer="1"/> +<wire x1="14.375" y1="26.775" x2="17.4" y2="29.8" width="0.2032" layer="1"/> +<wire x1="19.072" y1="15.104" x2="19.072" y2="18.472" width="0.2032" layer="1"/> +<wire x1="19.072" y1="18.472" x2="20.2" y2="19.6" width="0.2032" layer="1"/> +<wire x1="7.642" y1="15.104" x2="5.496" y2="15.104" width="0.2032" layer="16"/> +<wire x1="1.65" y1="18.95" x2="1.65" y2="23.96" width="0.2032" layer="16"/> +<via x="1.65" y="23.96" extent="1-16" drill="0.3"/> +<wire x1="5.496" y1="15.104" x2="1.65" y2="18.95" width="0.2032" layer="16"/> +<wire x1="1.15" y1="45.5" x2="1.15" y2="42.5" width="0.2032" layer="1"/> +<wire x1="1.15" y1="42.5" x2="1.15" y2="39.5" width="0.2032" layer="1"/> +<wire x1="1.15" y1="45.5" x2="2.15" y2="46.5" width="0.2032" layer="1"/> +<wire x1="2.15" y1="46.5" x2="7.9" y2="46.5" width="0.2032" layer="1"/> +<wire x1="7.9" y1="46.5" x2="8.6" y2="47.2" width="0.2032" layer="1"/> +<wire x1="8.6" y1="47.2" x2="8.6" y2="47.3" width="0.2032" layer="1"/> +<wire x1="7.9" y1="46.5" x2="8" y2="46.4" width="0.2032" layer="1"/> +<wire x1="8" y1="46.4" x2="8" y2="45.3" width="0.2032" layer="1"/> +<via x="8" y="45.3" extent="1-16" drill="0.3"/> +<wire x1="8" y1="45.3" x2="8" y2="40.45" width="0.2032" layer="16"/> +<wire x1="8" y1="40.45" x2="8.1" y2="40.35" width="0.2032" layer="16"/> +<via x="8.1" y="40.35" extent="1-16" drill="0.3"/> +<wire x1="11.95" y1="44.2" x2="13.6" y2="44.2" width="0.2032" layer="16"/> +<via x="13.6" y="44.2" extent="1-16" drill="0.3"/> +<wire x1="17.1" y1="31.5" x2="17.1" y2="36.2" width="0.2032" layer="16"/> +<wire x1="17.1" y1="36.2" x2="16.95" y2="36.35" width="0.2032" layer="16"/> +<wire x1="16.95" y1="36.35" x2="15.9" y2="37.4" width="0.2032" layer="16"/> +<wire x1="15.9" y1="37.4" x2="15.35" y2="37.95" width="0.2032" layer="16"/> +<wire x1="15.35" y1="37.95" x2="12.4" y2="40.9" width="0.2032" layer="16"/> +<wire x1="12.4" y1="40.9" x2="11.4" y2="40.9" width="0.2032" layer="16"/> +<wire x1="11.4" y1="40.9" x2="8.65" y2="40.9" width="0.2032" layer="16"/> +<wire x1="8.65" y1="40.9" x2="8.1" y2="40.35" width="0.2032" layer="16"/> +<wire x1="11.4" y1="40.9" x2="11.4" y2="43.65" width="0.2032" layer="16"/> +<wire x1="11.4" y1="43.65" x2="11.95" y2="44.2" width="0.2032" layer="16"/> +<wire x1="15.9" y1="37.4" x2="19.3" y2="40.8" width="0.2032" layer="16"/> +<wire x1="19.3" y1="40.8" x2="20.1" y2="40.8" width="0.2032" layer="16"/> +<via x="20.1" y="40.8" extent="1-16" drill="0.3"/> +<wire x1="8" y1="35.5" x2="7.5" y2="36" width="0.2032" layer="1"/> +<wire x1="7.5" y1="36" x2="7.5" y2="36.6" width="0.2032" layer="1"/> +<via x="7.5" y="36.6" extent="1-16" drill="0.3"/> +<wire x1="7.7436" y1="38.03046875" x2="8.06953125" y2="38.3564" width="0.2032" layer="16"/> +<wire x1="8.06953125" y1="38.3564" x2="8.53046875" y2="38.3564" width="0.2032" layer="16"/> +<wire x1="8.53046875" y1="38.3564" x2="8.8564" y2="38.03046875" width="0.2032" layer="16"/> +<wire x1="7.5" y1="36.6" x2="7.7436" y2="36.8436" width="0.2032" layer="16"/> +<wire x1="7.7436" y1="36.8436" x2="7.7436" y2="38.03046875" width="0.2032" layer="16"/> +<wire x1="8.8564" y1="38.03046875" x2="8.8564" y2="37.2436" width="0.2032" layer="16"/> +<wire x1="12.3" y1="33.8" x2="12.3" y2="32" width="0.2032" layer="16"/> +<via x="12.3" y="32" extent="1-16" drill="0.3"/> +<wire x1="8.8564" y1="37.2436" x2="11.75" y2="34.35" width="0.2032" layer="16"/> +<wire x1="11.75" y1="34.35" x2="12.3" y2="33.8" width="0.2032" layer="16"/> +<wire x1="15.35" y1="37.95" x2="11.75" y2="34.35" width="0.2032" layer="16"/> +<via x="41.8" y="53.3" extent="1-16" drill="0.3"/> +<wire x1="41.8" y1="53.3" x2="32.8" y2="53.3" width="0.2032" layer="16"/> +<wire x1="32.8" y1="53.3" x2="31.6" y2="52.1" width="0.2032" layer="16"/> +<via x="31.5" y="52.1" extent="1-16" drill="0.3"/> +<wire x1="31.1" y1="51.6592125" x2="28.554" y2="49.1132125" width="0.2032" layer="1"/> +<wire x1="27.95" y1="43.7907875" x2="27.95" y2="43.35" width="0.2032" layer="1"/> +<wire x1="28.554" y1="44.3947875" x2="27.95" y2="43.7907875" width="0.2032" layer="1"/> +<wire x1="28.554" y1="49.1132125" x2="28.554" y2="44.3947875" width="0.2032" layer="1"/> +<wire x1="31.6" y1="52.1" x2="31.5" y2="52.1" width="0.2032" layer="16"/> +<wire x1="31.1" y1="51.7" x2="31.1" y2="51.6592125" width="0.2032" layer="1"/> +<wire x1="31.5" y1="52.1" x2="31.1" y2="51.7" width="0.2032" layer="1"/> +<wire x1="27.95" y1="43.35" x2="26.5" y2="41.9" width="0.1524" layer="1"/> +<wire x1="26.5" y1="41.9" x2="26.1" y2="41.9" width="0.1524" layer="1"/> +<via x="26.1" y="41.9" extent="1-16" drill="0.3"/> +<wire x1="26.1" y1="41.9" x2="25.2684" y2="41.0684" width="0.1524" layer="16"/> +<wire x1="25.2684" y1="41.0684" x2="25.2684" y2="40.23603125" width="0.1524" layer="16"/> +<wire x1="25.2684" y1="40.23603125" x2="24.53236875" y2="39.5" width="0.1524" layer="16"/> +<wire x1="17.469" y1="36.869" x2="16.95" y2="36.35" width="0.1524" layer="16"/> +<wire x1="21.96295" y1="39.5" x2="19.831475" y2="37.368525" width="0.1524" layer="16"/> +<wire x1="19.831475" y1="37.368525" x2="19.33195" y2="36.869" width="0.1524" layer="16"/> +<wire x1="19.33195" y1="36.869" x2="17.469" y2="36.869" width="0.1524" layer="16"/> +<wire x1="24.53236875" y1="39.5" x2="21.96295" y2="39.5" width="0.1524" layer="16"/> +<wire x1="24.1" y1="33.06" x2="19.831475" y2="37.328525" width="0.1524" layer="16"/> +<wire x1="19.831475" y1="37.328525" x2="19.831475" y2="37.368525" width="0.1524" layer="16"/> +<wire x1="26.6" y1="16.5" x2="26.7" y2="16.4" width="0.1524" layer="16"/> +<wire x1="26.5" y1="12.5" x2="26.7" y2="12.5" width="0.1524" layer="16"/> +<wire x1="1.15" y1="39.5" x2="1.15" y2="30.55" width="0.2032" layer="1"/> +<wire x1="0.446" y1="29.846" x2="0.446" y2="25.164" width="0.2032" layer="1"/> +<wire x1="1.15" y1="30.55" x2="0.446" y2="29.846" width="0.2032" layer="1"/> +<wire x1="0.446" y1="25.164" x2="1.65" y2="23.96" width="0.2032" layer="1"/> +<wire x1="52.45" y1="49.35" x2="52.35" y2="49.35" width="0.1524" layer="1"/> +<wire x1="52.35" y1="49.35" x2="49" y2="46" width="0.1524" layer="1"/> +<wire x1="49" y1="46" x2="46" y2="46" width="0.1524" layer="1"/> +<wire x1="46" y1="46" x2="43.5" y2="48.5" width="0.1524" layer="1"/> +<wire x1="43.5" y1="48.5" x2="43.5" y2="53" width="0.1524" layer="1"/> +<wire x1="43.5" y1="53" x2="43" y2="53.5" width="0.1524" layer="1"/> +<wire x1="42" y1="53.5" x2="41.8" y2="53.3" width="0.1524" layer="1"/> +<wire x1="43" y1="53.5" x2="42" y2="53.5" width="0.1524" layer="1"/> +<wire x1="26.6" y1="24.5" x2="26.65" y2="24.5" width="0" layer="19" extent="1-1"/> +<wire x1="26.7" y1="24.5" x2="26.65" y2="24.5" width="0" layer="19" extent="1-16"/> +<wire x1="26.65" y1="16.5" x2="26.6" y2="16.5" width="0" layer="19" extent="1-1"/> +<wire x1="26.65" y1="12.5" x2="26.7" y2="12.5" width="0" layer="19" extent="1-16"/> +<wire x1="26.65" y1="20.5" x2="26.65" y2="24.5" width="0" layer="19" extent="1-1"/> +<wire x1="26.6" y1="20.5" x2="26.65" y2="20.5" width="0" layer="19" extent="1-1"/> </signal> <signal name="DC-CAL"> <contactref element="U2" pad="P$12"/> -<via x="64.37039375" y="48.3676" extent="1-16" drill="0.3"/> -<wire x1="66.000009375" y1="47.999996875" x2="64.772765625" y2="47.999996875" width="0.1524" layer="1"/> -<wire x1="64.772765625" y1="47.999996875" x2="64.6313625" y2="48.1414" width="0.1524" layer="1"/> -<wire x1="64.6313625" y1="48.1414" x2="64.59659375" y2="48.1414" width="0.1524" layer="1"/> -<wire x1="64.59659375" y1="48.1414" x2="64.37039375" y2="48.3676" width="0.1524" layer="1"/> -<wire x1="64.37039375" y1="48.3676" x2="64.14614375" y2="48.59185" width="0.1524" layer="16"/> -<wire x1="64.14614375" y1="48.59185" x2="63.83485" y2="48.59185" width="0.1524" layer="16"/> -<wire x1="63.83485" y1="48.59185" x2="63.5315" y2="48.8952" width="0.1524" layer="16"/> -<wire x1="63.5315" y1="48.8952" x2="61.70573125" y2="48.8952" width="0.1524" layer="16"/> -<wire x1="61.70573125" y1="48.8952" x2="61.13533125" y2="48.3248" width="0.1524" layer="16"/> -<wire x1="58.86466875" y1="48.3248" x2="57.7808" y2="49.40866875" width="0.1524" layer="16"/> -<wire x1="61.13533125" y1="48.3248" x2="58.86466875" y2="48.3248" width="0.1524" layer="16"/> -<wire x1="57.7808" y1="49.40866875" x2="57.7808" y2="50.6" width="0.1524" layer="16"/> -<wire x1="57.7808" y1="50.6" x2="57.3808" y2="51" width="0.1524" layer="16"/> -<wire x1="57.3808" y1="51" x2="55" y2="51" width="0.1524" layer="16"/> -<wire x1="55" y1="51" x2="53" y2="49" width="0.1524" layer="16"/> -<via x="53" y="49" extent="1-16" drill="0.3"/> -<wire x1="53" y1="49" x2="51.5" y2="49" width="0.1524" layer="1"/> -<wire x1="51.4" y1="48.9" x2="51.5" y2="49" width="0.1524" layer="1"/> +<via x="32.37039375" y="39.3676" extent="1-16" drill="0.3"/> +<wire x1="34.000009375" y1="38.999996875" x2="32.772765625" y2="38.999996875" width="0.1524" layer="1"/> +<wire x1="32.772765625" y1="38.999996875" x2="32.6313625" y2="39.1414" width="0.1524" layer="1"/> +<wire x1="32.6313625" y1="39.1414" x2="32.59659375" y2="39.1414" width="0.1524" layer="1"/> +<wire x1="32.59659375" y1="39.1414" x2="32.37039375" y2="39.3676" width="0.1524" layer="1"/> +<wire x1="32.37039375" y1="39.3676" x2="32.14614375" y2="39.59185" width="0.1524" layer="16"/> +<wire x1="32.14614375" y1="39.59185" x2="31.83485" y2="39.59185" width="0.1524" layer="16"/> +<wire x1="25.3808" y1="42" x2="23" y2="42" width="0.1524" layer="16"/> +<wire x1="23" y1="42" x2="21" y2="40" width="0.1524" layer="16"/> +<via x="21" y="40" extent="1-16" drill="0.3"/> +<wire x1="21" y1="40" x2="19.5" y2="40" width="0.1524" layer="1"/> +<wire x1="19.4" y1="39.9" x2="19.5" y2="40" width="0.1524" layer="1"/> <contactref element="U1" pad="13"/> -<wire x1="50.4" y1="48.85" x2="50.45" y2="48.9" width="0.1524" layer="1"/> -<wire x1="50.45" y1="48.9" x2="51.4" y2="48.9" width="0.1524" layer="1"/> +<wire x1="18.4" y1="39.85" x2="18.45" y2="39.9" width="0.1524" layer="1"/> +<wire x1="18.45" y1="39.9" x2="19.4" y2="39.9" width="0.1524" layer="1"/> +<wire x1="31.3" y1="40.1267" x2="31.3" y2="40.44659375" width="0.1524" layer="16"/> +<wire x1="30.46099375" y1="41.2856" x2="29.9840375" y2="41.2856" width="0.1524" layer="16"/> +<wire x1="31.3" y1="40.44659375" x2="30.46099375" y2="41.2856" width="0.1524" layer="16"/> +<wire x1="29.9840375" y1="41.2856" x2="29.3792375" y2="41.8904" width="0.1524" layer="16"/> +<wire x1="28.085375" y1="41.8904" x2="26.9878875" y2="42.9878875" width="0.1524" layer="16"/> +<wire x1="29.3792375" y1="41.8904" x2="28.085375" y2="41.8904" width="0.1524" layer="16"/> +<wire x1="26.9878875" y1="42.9878875" x2="26.3686875" y2="42.9878875" width="0.1524" layer="16"/> +<wire x1="26.3686875" y1="42.9878875" x2="25.3808" y2="42" width="0.1524" layer="16"/> +<wire x1="31.83485" y1="39.59185" x2="31.3" y2="40.1267" width="0.1524" layer="16"/> </signal> <signal name="V-U"> <contactref element="R27" pad="2"/> @@ -2025,21 +2355,21 @@ design rules under a new name.</description> <contactref element="C39" pad="1"/> <contactref element="J3" pad="5"/> <contactref element="D7" pad="1"/> -<wire x1="58.55" y1="35.35" x2="58.7" y2="35.5" width="0.2032" layer="1"/> -<wire x1="56.1" y1="34.5" x2="56.1" y2="34.44" width="0.2032" layer="16"/> -<wire x1="62.05" y1="35.5" x2="62.05" y2="33.5" width="0.1524" layer="1"/> -<wire x1="62.05" y1="33.5" x2="60.35" y2="33.5" width="0.1524" layer="1"/> -<wire x1="60.35" y1="33.5" x2="58.7" y2="35.15" width="0.1524" layer="1"/> -<wire x1="58.7" y1="35.15" x2="58.7" y2="35.5" width="0.1524" layer="1"/> -<wire x1="58.7" y1="35.5" x2="57.64" y2="34.44" width="0.2032" layer="1"/> -<wire x1="57.64" y1="34.44" x2="56.1" y2="34.44" width="0.2032" layer="1"/> +<wire x1="26.55" y1="26.35" x2="26.7" y2="26.5" width="0.2032" layer="1"/> +<wire x1="24.1" y1="25.5" x2="24.1" y2="25.44" width="0.2032" layer="16"/> +<wire x1="30.05" y1="26.5" x2="30.05" y2="24.5" width="0.1524" layer="1"/> +<wire x1="30.05" y1="24.5" x2="28.35" y2="24.5" width="0.1524" layer="1"/> +<wire x1="28.35" y1="24.5" x2="26.7" y2="26.15" width="0.1524" layer="1"/> +<wire x1="26.7" y1="26.15" x2="26.7" y2="26.5" width="0.1524" layer="1"/> +<wire x1="26.7" y1="26.5" x2="25.64" y2="25.44" width="0.2032" layer="1"/> +<wire x1="25.64" y1="25.44" x2="24.1" y2="25.44" width="0.2032" layer="1"/> <contactref element="U1" pad="2"/> -<wire x1="50.4" y1="43.35" x2="51.4078875" y2="43.35" width="0.1524" layer="1"/> -<wire x1="51.4078875" y1="43.35" x2="54.4952" y2="40.2626875" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="38.15374375" x2="54.8" y2="37.84894375" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="40.2626875" x2="54.4952" y2="38.15374375" width="0.1524" layer="1"/> -<wire x1="54.8" y1="35.74" x2="56.1" y2="34.44" width="0.1524" layer="1"/> -<wire x1="54.8" y1="37.84894375" x2="54.8" y2="35.74" width="0.1524" layer="1"/> +<wire x1="18.4" y1="34.35" x2="19.4078875" y2="34.35" width="0.1524" layer="1"/> +<wire x1="19.4078875" y1="34.35" x2="22.4952" y2="31.2626875" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="29.15374375" x2="22.8" y2="28.84894375" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="31.2626875" x2="22.4952" y2="29.15374375" width="0.1524" layer="1"/> +<wire x1="22.8" y1="26.74" x2="24.1" y2="25.44" width="0.1524" layer="1"/> +<wire x1="22.8" y1="28.84894375" x2="22.8" y2="26.74" width="0.1524" layer="1"/> </signal> <signal name="V-V"> <contactref element="R32" pad="2"/> @@ -2047,21 +2377,21 @@ design rules under a new name.</description> <contactref element="C41" pad="1"/> <contactref element="J3" pad="6"/> <contactref element="D2" pad="1"/> -<wire x1="62.05" y1="31.5" x2="62.05" y2="29.5" width="0.1524" layer="1"/> -<wire x1="62.05" y1="29.5" x2="60.35" y2="29.5" width="0.1524" layer="1"/> -<wire x1="60.35" y1="29.5" x2="58.7" y2="31.15" width="0.1524" layer="1"/> -<wire x1="58.7" y1="31.15" x2="58.7" y2="31.5" width="0.1524" layer="1"/> -<wire x1="58.7" y1="31.5" x2="56.5" y2="31.5" width="0.2032" layer="1"/> -<wire x1="56.5" y1="31.5" x2="56.1" y2="31.9" width="0.2032" layer="1"/> +<wire x1="30.05" y1="22.5" x2="30.05" y2="20.5" width="0.1524" layer="1"/> +<wire x1="30.05" y1="20.5" x2="28.35" y2="20.5" width="0.1524" layer="1"/> +<wire x1="28.35" y1="20.5" x2="26.7" y2="22.15" width="0.1524" layer="1"/> +<wire x1="26.7" y1="22.15" x2="26.7" y2="22.5" width="0.1524" layer="1"/> +<wire x1="26.7" y1="22.5" x2="24.5" y2="22.5" width="0.2032" layer="1"/> +<wire x1="24.5" y1="22.5" x2="24.1" y2="22.9" width="0.2032" layer="1"/> <contactref element="U1" pad="1"/> -<wire x1="50.4" y1="42.85" x2="51.47683125" y2="42.85" width="0.1524" layer="1"/> -<wire x1="51.47683125" y1="42.85" x2="54.1904" y2="40.13643125" width="0.1524" layer="1"/> -<wire x1="54.1904" y1="38.0096" x2="54.4952" y2="37.7048" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="35.61374375" x2="54.8" y2="35.30894375" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="37.7048" x2="54.4952" y2="35.61374375" width="0.1524" layer="1"/> -<wire x1="54.8" y1="33.2" x2="56.1" y2="31.9" width="0.1524" layer="1"/> -<wire x1="54.1904" y1="40.13643125" x2="54.1904" y2="38.0096" width="0.1524" layer="1"/> -<wire x1="54.8" y1="35.30894375" x2="54.8" y2="33.2" width="0.1524" layer="1"/> +<wire x1="18.4" y1="33.85" x2="19.47683125" y2="33.85" width="0.1524" layer="1"/> +<wire x1="19.47683125" y1="33.85" x2="22.1904" y2="31.13643125" width="0.1524" layer="1"/> +<wire x1="22.1904" y1="29.0096" x2="22.4952" y2="28.7048" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="26.61374375" x2="22.8" y2="26.30894375" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="28.7048" x2="22.4952" y2="26.61374375" width="0.1524" layer="1"/> +<wire x1="22.8" y1="24.2" x2="24.1" y2="22.9" width="0.1524" layer="1"/> +<wire x1="22.1904" y1="31.13643125" x2="22.1904" y2="29.0096" width="0.1524" layer="1"/> +<wire x1="22.8" y1="26.30894375" x2="22.8" y2="24.2" width="0.1524" layer="1"/> </signal> <signal name="V-VCC"> <contactref element="R39" pad="2"/> @@ -2069,960 +2399,1139 @@ design rules under a new name.</description> <contactref element="C45" pad="1"/> <contactref element="J3" pad="8"/> <contactref element="D5" pad="1"/> -<wire x1="62.05" y1="23.5" x2="62.05" y2="21.5" width="0.1524" layer="1"/> -<wire x1="62.05" y1="21.5" x2="60.35" y2="21.5" width="0.1524" layer="1"/> -<wire x1="60.35" y1="21.5" x2="58.7" y2="23.15" width="0.1524" layer="1"/> -<wire x1="58.7" y1="23.15" x2="58.7" y2="23.5" width="0.1524" layer="1"/> -<wire x1="58.7" y1="23.5" x2="56.1" y2="26.1" width="0.2032" layer="1"/> -<wire x1="56.1" y1="26.1" x2="56.1" y2="26.82" width="0.2032" layer="1"/> +<wire x1="30.05" y1="14.5" x2="30.05" y2="12.5" width="0.1524" layer="1"/> +<wire x1="30.05" y1="12.5" x2="28.35" y2="12.5" width="0.1524" layer="1"/> +<wire x1="28.35" y1="12.5" x2="26.7" y2="14.15" width="0.1524" layer="1"/> +<wire x1="26.7" y1="14.15" x2="26.7" y2="14.5" width="0.1524" layer="1"/> +<wire x1="26.7" y1="14.5" x2="24.1" y2="17.1" width="0.2032" layer="1"/> +<wire x1="24.1" y1="17.1" x2="24.1" y2="17.82" width="0.2032" layer="1"/> <contactref element="U1" pad="63"/> -<wire x1="49.15" y1="42.1" x2="49.15" y2="41.55" width="0.1524" layer="1"/> -<wire x1="49.15" y1="41.55" x2="49.3" y2="41.4" width="0.1524" layer="1"/> -<wire x1="49.3" y1="41.4" x2="52.06471875" y2="41.4" width="0.1524" layer="1"/> -<wire x1="52.06471875" y1="41.4" x2="53.5808" y2="39.88391875" width="0.1524" layer="1"/> -<wire x1="53.5808" y1="37.7570875" x2="53.8856" y2="37.4522875" width="0.1524" layer="1"/> -<wire x1="53.5808" y1="39.88391875" x2="53.5808" y2="37.7570875" width="0.1524" layer="1"/> -<wire x1="53.8856" y1="37.4522875" x2="53.8856" y2="35.36123125" width="0.1524" layer="1"/> -<wire x1="53.8856" y1="35.36123125" x2="54.1904" y2="35.05643125" width="0.1524" layer="1"/> -<wire x1="54.1904" y1="35.05643125" x2="54.1904" y2="32.9474875" width="0.1524" layer="1"/> -<wire x1="54.1904" y1="32.9474875" x2="54.4952" y2="32.6426875" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="30.53374375" x2="54.8" y2="30.22894375" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="32.6426875" x2="54.4952" y2="30.53374375" width="0.1524" layer="1"/> -<wire x1="54.8" y1="28.12" x2="56.1" y2="26.82" width="0.1524" layer="1"/> -<wire x1="54.8" y1="30.22894375" x2="54.8" y2="28.12" width="0.1524" layer="1"/> +<wire x1="21.5808" y1="28.7570875" x2="21.8856" y2="28.4522875" width="0.1524" layer="1"/> +<wire x1="21.5808" y1="30.88391875" x2="21.5808" y2="28.7570875" width="0.1524" layer="1"/> +<wire x1="21.8856" y1="28.4522875" x2="21.8856" y2="26.36123125" width="0.1524" layer="1"/> +<wire x1="21.8856" y1="26.36123125" x2="22.1904" y2="26.05643125" width="0.1524" layer="1"/> +<wire x1="22.1904" y1="26.05643125" x2="22.1904" y2="23.9474875" width="0.1524" layer="1"/> +<wire x1="22.1904" y1="23.9474875" x2="22.4952" y2="23.6426875" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="21.53374375" x2="22.8" y2="21.22894375" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="23.6426875" x2="22.4952" y2="21.53374375" width="0.1524" layer="1"/> +<wire x1="22.8" y1="19.12" x2="24.1" y2="17.82" width="0.1524" layer="1"/> +<wire x1="22.8" y1="21.22894375" x2="22.8" y2="19.12" width="0.1524" layer="1"/> +<wire x1="17.15" y1="33.1" x2="17.15" y2="32.75" width="0.1524" layer="1"/> +<wire x1="17.15" y1="32.75" x2="17.3786" y2="32.5214" width="0.1524" layer="1"/> +<wire x1="17.9214" y1="32.5214" x2="18.1952" y2="32.7952" width="0.1524" layer="1"/> +<wire x1="17.3786" y1="32.5214" x2="17.9214" y2="32.5214" width="0.1524" layer="1"/> +<wire x1="18.1952" y1="32.7952" x2="19.66951875" y2="32.7952" width="0.1524" layer="1"/> +<wire x1="19.66951875" y1="32.7952" x2="21.5808" y2="30.88391875" width="0.1524" layer="1"/> </signal> <signal name="PHASE-U"> <contactref element="R26" pad="2"/> <contactref element="U2" pad="P$46"/> <contactref element="C31" pad="2"/> -<contactref element="U$9" pad="VSW"/> <contactref element="J7" pad="P$1"/> -<contactref element="U$9" pad="SH"/> -<wire x1="73.49999375" y1="48.49999375" x2="73.55549375" y2="48.55549375" width="0.2032" layer="1"/> -<wire x1="77.1716" y1="49.2968625" x2="77.1716" y2="49.6216" width="0.2032" layer="1"/> -<wire x1="77.1716" y1="49.6216" x2="77.55" y2="50" width="0.2032" layer="1"/> -<wire x1="73.55549375" y1="48.55549375" x2="76.43023125" y2="48.55549375" width="0.2032" layer="1"/> -<wire x1="76.43023125" y1="48.55549375" x2="77.1716" y2="49.2968625" width="0.2032" layer="1"/> -<via x="78.4" y="50.9" extent="1-16" drill="0.35"/> -<wire x1="78.4" y1="50.9" x2="77.55" y2="50.05" width="0.2032" layer="1"/> -<wire x1="77.55" y1="50.05" x2="77.55" y2="50" width="0.2032" layer="1"/> -<wire x1="92.37625" y1="52.1798" x2="92.5548" y2="52.00125" width="0.2032" layer="1"/> -<wire x1="91.75" y1="52.25" x2="91.8202" y2="52.1798" width="0.2032" layer="1"/> -<wire x1="91.8202" y1="52.1798" x2="92.37625" y2="52.1798" width="0.2032" layer="1"/> -<wire x1="92.5548" y1="52.00125" x2="92.5548" y2="50.8240125" width="0.2032" layer="1"/> -<wire x1="92.5548" y1="50.8240125" x2="92.0445875" y2="50.3138" width="0.2032" layer="1"/> -<wire x1="90.9554125" y1="50.3138" x2="90.5756125" y2="50.6936" width="0.2032" layer="1"/> -<wire x1="92.0445875" y1="50.3138" x2="90.9554125" y2="50.3138" width="0.2032" layer="1"/> -<wire x1="87.9243875" y1="50.6936" x2="87.5445875" y2="50.3138" width="0.2032" layer="1"/> -<wire x1="87.5445875" y1="50.3138" x2="86.4554125" y2="50.3138" width="0.2032" layer="1"/> -<wire x1="86.4554125" y1="50.3138" x2="85.8320125" y2="50.9372" width="0.2032" layer="1"/> -<wire x1="90.5756125" y1="50.6936" x2="87.9243875" y2="50.6936" width="0.2032" layer="1"/> -<wire x1="83.37226875" y1="50.9372" x2="83.16186875" y2="50.7268" width="0.2032" layer="1"/> -<wire x1="83.16186875" y1="50.7268" x2="82.63813125" y2="50.7268" width="0.2032" layer="1"/> -<wire x1="82.63813125" y1="50.7268" x2="82.032465625" y2="51.332465625" width="0.2032" layer="1"/> -<wire x1="85.8320125" y1="50.9372" x2="83.37226875" y2="50.9372" width="0.2032" layer="1"/> -<polygon width="0.2032" layer="1" thermals="no" rank="3"> -<vertex x="91.3" y="52.7"/> -<vertex x="91.3" y="57.7"/> -<vertex x="94.7" y="61.2"/> -<vertex x="94.7" y="62"/> -<vertex x="100.5" y="62"/> -<vertex x="100.5" y="51.6"/> -<vertex x="93" y="51.6"/> -<vertex x="93" y="52.3"/> -<vertex x="92.5" y="52.7"/> +<contactref element="Q1" pad="P$3"/> +<contactref element="Q1" pad="P$2"/> +<contactref element="Q1" pad="P$1"/> +<contactref element="Q2" pad="P$5"/> +<wire x1="45.55" y1="41" x2="45.1208" y2="40.5708" width="0.2032" layer="1"/> +<wire x1="45.1208" y1="40.5708" x2="45.1208" y2="40.3179" width="0.2032" layer="1"/> +<wire x1="42.34724375" y1="39.50469375" x2="42.34254375" y2="39.49999375" width="0.2032" layer="1"/> +<wire x1="42.34254375" y1="39.49999375" x2="41.49999375" y2="39.49999375" width="0.2032" layer="1"/> +<wire x1="45.1208" y1="40.3179" x2="44.30759375" y2="39.50469375" width="0.2032" layer="1"/> +<wire x1="44.30759375" y1="39.50469375" x2="42.34724375" y2="39.50469375" width="0.2032" layer="1"/> +<contactref element="U9" pad="3"/> +<contactref element="Q8" pad="P$1"/> +<contactref element="Q8" pad="P$2"/> +<contactref element="Q8" pad="P$3"/> +<contactref element="Q7" pad="P$5"/> +<polygon width="0.0762" layer="1" thermals="no" rank="4"> +<vertex x="56.5" y="49.5"/> +<vertex x="54" y="49.5"/> +<vertex x="54" y="47"/> +<vertex x="56.5" y="47"/> +<vertex x="56.5" y="34.5"/> +<vertex x="75.2" y="34.5"/> +<vertex x="75.2" y="30.6"/> +<vertex x="83.5" y="30.6"/> +<vertex x="83.5" y="38"/> +<vertex x="83.5" y="41.5"/> +<vertex x="62.5" y="41.5"/> +<vertex x="62.5" y="49.5"/> </polygon> -<polygon width="0.2032" layer="16" thermals="no" rank="3"> -<vertex x="91.3" y="51.6"/> -<vertex x="91.3" y="57.7"/> -<vertex x="94.7" y="61.2"/> -<vertex x="94.7" y="62"/> -<vertex x="100.5" y="62"/> -<vertex x="100.5" y="51.6"/> +<polygon width="0.0762" layer="16" thermals="no" rank="3"> +<vertex x="62.389609375" y="49.5"/> +<vertex x="53.5" y="49.5"/> +<vertex x="53.5" y="34.5"/> +<vertex x="62.5" y="34.5"/> +<vertex x="67" y="34.5"/> +<vertex x="67" y="41"/> +<vertex x="62.5" y="41"/> </polygon> -<via x="91.6" y="56.5" extent="1-16" drill="0.35"/> -<wire x1="77" y1="45.02555" x2="77" y2="44" width="0.2032" layer="16"/> -<wire x1="76.1178" y1="45.90775" x2="77" y2="45.02555" width="0.2032" layer="16"/> -<wire x1="77.28813125" y1="47.6322" x2="76.1178" y2="46.46186875" width="0.2032" layer="16"/> -<wire x1="76.1178" y1="46.46186875" x2="76.1178" y2="45.90775" width="0.2032" layer="16"/> -<wire x1="75.63813125" y1="43.7322" x2="75.2678" y2="43.36186875" width="0.2032" layer="16"/> -<wire x1="75.2678" y1="43.36186875" x2="75.2678" y2="42.83813125" width="0.2032" layer="16"/> -<wire x1="75.2678" y1="42.83813125" x2="75.48240625" y2="42.623525" width="0.2032" layer="16"/> -<wire x1="77" y1="44" x2="76.7322" y2="43.7322" width="0.2032" layer="16"/> -<wire x1="76.7322" y1="43.7322" x2="75.63813125" y2="43.7322" width="0.2032" layer="16"/> -<wire x1="75.48240625" y1="41.84426875" x2="75.25660625" y2="41.61846875" width="0.2032" layer="16"/> -<wire x1="75.25660625" y1="41.61846875" x2="75.25660625" y2="41.09473125" width="0.2032" layer="16"/> -<wire x1="75.25660625" y1="41.09473125" x2="75.9067375" y2="40.4446" width="0.2032" layer="16"/> -<wire x1="75.48240625" y1="42.623525" x2="75.48240625" y2="41.84426875" width="0.2032" layer="16"/> -<wire x1="82.032465625" y1="51.332465625" x2="80.358734375" y2="51.332465625" width="0.2032" layer="1"/> -<wire x1="80.358734375" y1="51.332465625" x2="80.3322" y2="51.359" width="0.2032" layer="1"/> -<via x="80.3322" y="51.359" extent="1-16" drill="0.35"/> -<wire x1="80.3322" y1="51.359" x2="78.859" y2="51.359" width="0.2032" layer="16"/> -<wire x1="78.859" y1="51.359" x2="78.4" y2="50.9" width="0.2032" layer="16"/> -<wire x1="80.3322" y1="51.359" x2="80.3322" y2="50.9322" width="0.2032" layer="1"/> -<wire x1="80.3322" y1="50.9322" x2="80.1064" y2="50.7064" width="0.2032" layer="1"/> -<via x="78.5606" y="47.40548125" extent="1-16" drill="0.35"/> -<wire x1="78.5606" y1="48.550075" x2="78.5606" y2="47.40548125" width="0.2032" layer="1"/> -<wire x1="80.1064" y1="50.095875" x2="78.5606" y2="48.550075" width="0.2032" layer="1"/> -<wire x1="78.5606" y1="47.40548125" x2="78.0385875" y2="47.40548125" width="0.2032" layer="16"/> -<wire x1="78.0385875" y1="47.40548125" x2="77.81186875" y2="47.6322" width="0.2032" layer="16"/> -<wire x1="77.81186875" y1="47.6322" x2="77.28813125" y2="47.6322" width="0.2032" layer="16"/> -<wire x1="80.1064" y1="50.7064" x2="80.1064" y2="50.095875" width="0.2032" layer="1"/> -<wire x1="75.9067375" y1="31.581475" x2="73.8316625" y2="29.5064" width="0.2032" layer="16"/> -<wire x1="73.8316625" y1="29.5064" x2="67.58766875" y2="29.5064" width="0.2032" layer="16"/> -<wire x1="75.9067375" y1="40.4446" x2="75.9067375" y2="31.581475" width="0.2032" layer="16"/> -<via x="92.3" y="56.5" extent="1-16" drill="0.35"/> -<via x="91.6" y="55.7" extent="1-16" drill="0.35"/> -<via x="92.3" y="55.7" extent="1-16" drill="0.35"/> -<via x="91.6" y="54.9" extent="1-16" drill="0.35"/> -<via x="92.3" y="54.9" extent="1-16" drill="0.35"/> -<via x="91.6" y="54.1" extent="1-16" drill="0.35"/> -<via x="92.3" y="54.1" extent="1-16" drill="0.35"/> -<via x="91.6" y="53.3" extent="1-16" drill="0.35"/> -<via x="92.3" y="53.3" extent="1-16" drill="0.35"/> -<via x="93.4" y="56.5" extent="1-16" drill="0.35"/> -<via x="94.1" y="55.2" extent="1-16" drill="0.35"/> -<via x="95.7" y="54.5" extent="1-16" drill="0.35"/> -<via x="97.9" y="54.4" extent="1-16" drill="0.35"/> -<via x="99.5" y="55.1" extent="1-16" drill="0.35"/> -<via x="93.3" y="58.9" extent="1-16" drill="0.35"/> -<via x="93.4" y="54.1" extent="1-16" drill="0.35"/> -<via x="93.7" y="52.4" extent="1-16" drill="0.35"/> -<via x="95.8" y="52.7" extent="1-16" drill="0.35"/> -<via x="98" y="52.8" extent="1-16" drill="0.35"/> -<wire x1="67.58766875" y1="29.5064" x2="63.95" y2="33.14406875" width="0.1524" layer="16"/> -<wire x1="63.95" y1="33.14406875" x2="63.95" y2="33.5" width="0.1524" layer="16"/> -<via x="63.95" y="33.5" extent="1-16" drill="0.3"/> -<wire x1="91.6" y1="53.3" x2="91.75" y2="52.25" width="0" layer="19" extent="1-1"/> +<wire x1="45.55" y1="41" x2="47.1029" y2="41" width="0.2032" layer="1"/> +<wire x1="47.1029" y1="41" x2="49.7989" y2="43.696" width="0.2032" layer="1"/> +<wire x1="49.7989" y1="43.696" x2="52.596" y2="43.696" width="0.2032" layer="1"/> +<wire x1="52.596" y1="43.696" x2="53.5" y2="44.6" width="0.2032" layer="1"/> +<wire x1="53.5" y1="44.6" x2="53.5" y2="46.4" width="0.2032" layer="1"/> +<wire x1="53.5" y1="46.4" x2="53.7" y2="46.6" width="0.2032" layer="1"/> +<wire x1="59.45" y1="44.75" x2="59.45" y2="44" width="0.2032" layer="1"/> +<wire x1="53.7" y1="46.6" x2="57.6" y2="46.6" width="0.2032" layer="1"/> +<wire x1="57.6" y1="46.6" x2="59.45" y2="44.75" width="0.2032" layer="1"/> +<wire x1="53.3444" y1="22.1444" x2="52.8556" y2="21.6556" width="0.2032" layer="16"/> +<wire x1="52.8436" y1="32.80753125" x2="52.8436" y2="33.26846875" width="0.2032" layer="16"/> +<wire x1="52.8436" y1="33.26846875" x2="53.0444" y2="33.46926875" width="0.2032" layer="16"/> +<wire x1="53.3444" y1="32.30673125" x2="52.8436" y2="32.80753125" width="0.2032" layer="16"/> +<wire x1="53.0444" y1="34.4473" x2="53.2527" y2="34.6556" width="0.2032" layer="16"/> +<wire x1="53.0444" y1="33.46926875" x2="53.0444" y2="34.4473" width="0.2032" layer="16"/> +<wire x1="56.9556" y1="34.6556" x2="57.4" y2="35.1" width="0.2032" layer="16"/> +<wire x1="53.3444" y1="22.1444" x2="53.3444" y2="32.30673125" width="0.2032" layer="16"/> +<wire x1="53.2527" y1="34.6556" x2="56.9556" y2="34.6556" width="0.2032" layer="16"/> +<wire x1="52.8556" y1="21.6556" x2="52.6556" y2="21.6556" width="0.2032" layer="16"/> +<wire x1="52.6556" y1="21.6556" x2="52.412" y2="21.412" width="0.2032" layer="16"/> +<wire x1="51.67223125" y1="21.412" x2="51.51583125" y2="21.2556" width="0.2032" layer="16"/> +<wire x1="52.412" y1="21.412" x2="51.67223125" y2="21.412" width="0.2032" layer="16"/> +<wire x1="47.5498" y1="21.2556" x2="46.5971" y2="20.3029" width="0.2032" layer="16"/> +<wire x1="51.51583125" y1="21.2556" x2="47.5498" y2="21.2556" width="0.2032" layer="16"/> +<wire x1="46.5971" y1="20.3029" x2="46.02915625" y2="20.3029" width="0.2032" layer="16"/> +<wire x1="46.02915625" y1="20.3029" x2="45.754165625" y2="20.027909375" width="0.2032" layer="16"/> +<via x="45.754165625" y="20.027909375" extent="1-16" drill="0.3"/> +<wire x1="45.754165625" y1="20.027909375" x2="44.93745625" y2="19.2112" width="0.2032" layer="1"/> +<wire x1="44.93745625" y1="19.2112" x2="33.7417" y2="19.2112" width="0.2032" layer="1"/> +<wire x1="33.7417" y1="19.2112" x2="32.554" y2="20.3989" width="0.2032" layer="1"/> +<wire x1="32.554" y1="23.896" x2="31.95" y2="24.5" width="0.2032" layer="1"/> +<wire x1="32.554" y1="20.3989" x2="32.554" y2="23.896" width="0.2032" layer="1"/> +<via x="61.5" y="46" extent="1-16" drill="0.35"/> +<via x="61.5" y="45" extent="1-16" drill="0.35"/> +<via x="61.5" y="44" extent="1-16" drill="0.35"/> +<via x="61.5" y="43" extent="1-16" drill="0.35"/> +<via x="61.5" y="42" extent="1-16" drill="0.35"/> +<via x="60.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="46" extent="1-16" drill="0.35"/> +<via x="59.5" y="45" extent="1-16" drill="0.35"/> +<via x="59.5" y="44" extent="1-16" drill="0.35"/> +<via x="59.5" y="43" extent="1-16" drill="0.35"/> +<via x="59.5" y="42" extent="1-16" drill="0.35"/> +<via x="58.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="39.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="38.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="37.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="36.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="35.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="36" extent="1-16" drill="0.35"/> +<via x="60.5" y="37" extent="1-16" drill="0.35"/> +<via x="60.5" y="38" extent="1-16" drill="0.35"/> +<via x="60.5" y="39" extent="1-16" drill="0.35"/> +<via x="59.5" y="39.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="38.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="37.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="36.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="35.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="36" extent="1-16" drill="0.35"/> +<via x="58.5" y="37" extent="1-16" drill="0.35"/> +<via x="58.5" y="38" extent="1-16" drill="0.35"/> +<via x="58.5" y="39" extent="1-16" drill="0.35"/> +<via x="66" y="39.5" extent="1-16" drill="0.35"/> +<via x="66" y="38.5" extent="1-16" drill="0.35"/> +<via x="66" y="37.5" extent="1-16" drill="0.35"/> +<via x="66" y="36.5" extent="1-16" drill="0.35"/> +<via x="66" y="35.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="48.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="48.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="40" extent="1-16" drill="0.35"/> +<via x="58.5" y="40" extent="1-16" drill="0.35"/> +<via x="58.5" y="41.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="41.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="35" extent="1-16" drill="0.35"/> +<via x="58.5" y="35" extent="1-16" drill="0.35"/> +<via x="57.5" y="46" extent="1-16" drill="0.35"/> +<via x="57.5" y="45" extent="1-16" drill="0.35"/> +<via x="57.5" y="44" extent="1-16" drill="0.35"/> +<via x="57.5" y="43" extent="1-16" drill="0.35"/> +<via x="57.5" y="42" extent="1-16" drill="0.35"/> +<via x="57.5" y="39.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="38.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="37.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="36.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="35.5" extent="1-16" drill="0.35"/> </signal> <signal name="VCC"> -<contactref element="C40" pad="1"/> -<contactref element="C42" pad="1"/> -<contactref element="C44" pad="1"/> +<contactref element="R38" pad="2"/> +<contactref element="C15" pad="1"/> +<contactref element="C18" pad="1"/> +<contactref element="C21" pad="1"/> +<contactref element="J5" pad="1"/> +<contactref element="Q1" pad="P$5"/> +<contactref element="Q4" pad="P$5"/> +<contactref element="Q6" pad="P$5"/> +<contactref element="U4" pad="11"/> +<contactref element="U4" pad="3"/> +<contactref element="U4" pad="2"/> +<contactref element="C23" pad="1"/> <contactref element="C26" pad="1"/> <contactref element="C24" pad="1"/> <contactref element="U2" pad="P$29"/> +<contactref element="C10" pad="1"/> <contactref element="J8" pad="P$1"/> -<contactref element="C25" pad="1"/> -<contactref element="R38" pad="2"/> -<contactref element="U$9" pad="VIN"/> -<contactref element="U$10" pad="VIN"/> -<contactref element="U$11" pad="VIN"/> <contactref element="BFC1" pad="P$1"/> -<polygon width="0.2032" layer="1" thermals="no" rank="5"> -<vertex x="58" y="63"/> -<vertex x="58" y="37.5"/> -<vertex x="65.5" y="37.5"/> -<vertex x="65.5" y="8"/> -<vertex x="102" y="8"/> -<vertex x="101.5" y="63"/> +<contactref element="BFC2" pad="P$1"/> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="40.7" y="31.2"/> +<vertex x="42.75" y="31.2"/> +<vertex x="42.75" y="28.15"/> +<vertex x="42.75" y="25.5"/> +<vertex x="40.8" y="25.5"/> +<vertex x="40.8" y="30.7"/> +<vertex x="40.7" y="30.8"/> </polygon> -<contactref element="C10" pad="1"/> -<contactref element="C15" pad="1"/> -<polygon width="0.2032" layer="16" rank="4"> -<vertex x="87.4" y="57.8"/> -<vertex x="87.3" y="28.3"/> -<vertex x="87.3" y="22.2"/> -<vertex x="92.1" y="22.2"/> -<vertex x="95.2" y="21"/> -<vertex x="100.5" y="21.1"/> -<vertex x="100.5" y="30.1"/> -<vertex x="95.4" y="30.1"/> -<vertex x="91.2" y="34.3"/> -<vertex x="91.1" y="40.6"/> -<vertex x="91.3" y="40.8"/> -<vertex x="93.9" y="40.8"/> -<vertex x="93.9" y="42.6"/> -<vertex x="93.8" y="42.7"/> -<vertex x="91.3" y="42.7"/> -<vertex x="91.1" y="42.9"/> -<vertex x="91.1" y="48.7"/> -<vertex x="91.3" y="48.9"/> -<vertex x="93.9" y="48.9"/> -<vertex x="93.9" y="51.1"/> -<vertex x="91.3" y="51.1"/> -<vertex x="91.1" y="51.3"/> -<vertex x="91.1" y="57.9"/> -<vertex x="94.5" y="61.3"/> -<vertex x="94.5" y="62"/> -<vertex x="81.7" y="62"/> -<vertex x="81.8" y="57.8"/> +<wire x1="42.15" y1="11" x2="43.025" y2="11" width="0.1524" layer="1"/> +<polygon width="0.0762" layer="1" thermals="no" rank="4"> +<vertex x="43.4" y="11.15"/> +<vertex x="42.5" y="11.15"/> +<vertex x="41.8" y="11.85"/> +<vertex x="41.8" y="12.925"/> +<vertex x="41.825" y="12.95"/> +<vertex x="40.6" y="12.95"/> +<vertex x="40.5" y="12.95"/> +<vertex x="40.1" y="12.55"/> +<vertex x="40.1" y="9.85"/> +<vertex x="41.9" y="9.85"/> +<vertex x="42.4" y="10.35"/> +<vertex x="43.4" y="10.35"/> +<vertex x="43.5" y="10.45"/> +<vertex x="43.5" y="11.05"/> </polygon> -<via x="88.9" y="48" extent="1-16" drill="0.35"/> -<via x="89.2" y="33.4" extent="1-16" drill="0.35"/> -<contactref element="C18" pad="1"/> -<contactref element="C21" pad="1"/> -<via x="88.2" y="48" extent="1-16" drill="0.35"/> -<via x="89.6" y="48" extent="1-16" drill="0.35"/> -<via x="90.3" y="48" extent="1-16" drill="0.35"/> -<via x="88.9" y="40" extent="1-16" drill="0.35"/> -<via x="88.2" y="40" extent="1-16" drill="0.35"/> -<via x="89.6" y="40" extent="1-16" drill="0.35"/> -<via x="90.3" y="40" extent="1-16" drill="0.35"/> -<via x="88.9" y="56.5" extent="1-16" drill="0.35"/> -<via x="88.2" y="56.5" extent="1-16" drill="0.35"/> -<via x="89.6" y="56.5" extent="1-16" drill="0.35"/> -<via x="90.3" y="56.5" extent="1-16" drill="0.35"/> -<via x="88.9" y="47.2" extent="1-16" drill="0.35"/> -<via x="88.2" y="47.2" extent="1-16" drill="0.35"/> -<via x="89.6" y="47.2" extent="1-16" drill="0.35"/> -<via x="90.3" y="47.2" extent="1-16" drill="0.35"/> -<via x="88.9" y="39.2" extent="1-16" drill="0.35"/> -<via x="88.2" y="39.2" extent="1-16" drill="0.35"/> -<via x="89.6" y="39.2" extent="1-16" drill="0.35"/> -<via x="90.3" y="39.2" extent="1-16" drill="0.35"/> -<via x="88.9" y="55.7" extent="1-16" drill="0.35"/> -<via x="88.2" y="55.7" extent="1-16" drill="0.35"/> -<via x="89.6" y="55.7" extent="1-16" drill="0.35"/> -<via x="90.3" y="55.7" extent="1-16" drill="0.35"/> -<via x="88.9" y="46.4" extent="1-16" drill="0.35"/> -<via x="88.2" y="46.4" extent="1-16" drill="0.35"/> -<via x="89.6" y="46.4" extent="1-16" drill="0.35"/> -<via x="90.3" y="46.4" extent="1-16" drill="0.35"/> -<via x="88.9" y="38.4" extent="1-16" drill="0.35"/> -<via x="88.2" y="38.4" extent="1-16" drill="0.35"/> -<via x="89.6" y="38.4" extent="1-16" drill="0.35"/> -<via x="90.3" y="38.4" extent="1-16" drill="0.35"/> -<via x="88.9" y="54.9" extent="1-16" drill="0.35"/> -<via x="88.2" y="54.9" extent="1-16" drill="0.35"/> -<via x="89.6" y="54.9" extent="1-16" drill="0.35"/> -<via x="90.3" y="54.9" extent="1-16" drill="0.35"/> -<via x="88.9" y="45.6" extent="1-16" drill="0.35"/> -<via x="88.2" y="45.6" extent="1-16" drill="0.35"/> -<via x="89.6" y="45.6" extent="1-16" drill="0.35"/> -<via x="90.3" y="45.6" extent="1-16" drill="0.35"/> -<via x="88.9" y="37.6" extent="1-16" drill="0.35"/> -<via x="88.2" y="37.6" extent="1-16" drill="0.35"/> -<via x="89.6" y="37.6" extent="1-16" drill="0.35"/> -<via x="90.3" y="37.6" extent="1-16" drill="0.35"/> -<via x="88.9" y="54.1" extent="1-16" drill="0.35"/> -<via x="88.2" y="54.1" extent="1-16" drill="0.35"/> -<via x="89.6" y="54.1" extent="1-16" drill="0.35"/> -<via x="90.3" y="54.1" extent="1-16" drill="0.35"/> -<via x="88.9" y="44.8" extent="1-16" drill="0.35"/> -<via x="88.2" y="44.8" extent="1-16" drill="0.35"/> -<via x="89.6" y="44.8" extent="1-16" drill="0.35"/> -<via x="90.3" y="44.8" extent="1-16" drill="0.35"/> -<via x="88.9" y="36.8" extent="1-16" drill="0.35"/> -<via x="88.2" y="36.8" extent="1-16" drill="0.35"/> -<via x="89.6" y="36.8" extent="1-16" drill="0.35"/> -<via x="90.3" y="36.8" extent="1-16" drill="0.35"/> -<via x="88.9" y="53.3" extent="1-16" drill="0.35"/> -<via x="88.2" y="53.3" extent="1-16" drill="0.35"/> -<via x="89.6" y="53.3" extent="1-16" drill="0.35"/> -<via x="90.3" y="53.3" extent="1-16" drill="0.35"/> -<via x="90.2" y="33.4" extent="1-16" drill="0.35"/> -<via x="89.2" y="32.5" extent="1-16" drill="0.35"/> -<via x="90.2" y="32.5" extent="1-16" drill="0.35"/> -<via x="91.2" y="32.9" extent="1-16" drill="0.35"/> -<via x="92" y="32.1" extent="1-16" drill="0.35"/> -<via x="89.2" y="31.5" extent="1-16" drill="0.35"/> -<via x="90.2" y="31.5" extent="1-16" drill="0.35"/> -<via x="89.2" y="30.5" extent="1-16" drill="0.35"/> -<via x="90.2" y="30.5" extent="1-16" drill="0.35"/> -<via x="91.2" y="31" extent="1-16" drill="0.35"/> -<via x="92.9" y="31" extent="1-16" drill="0.35"/> -<via x="88.4" y="27.8" extent="1-16" drill="0.35"/> -<via x="90.5" y="28.5" extent="1-16" drill="0.35"/> -<via x="92.4" y="29.1" extent="1-16" drill="0.35"/> -<via x="94.2" y="29.8" extent="1-16" drill="0.35"/> -<via x="88.5" y="58.2" extent="1-16" drill="0.35"/> -<via x="90" y="58.2" extent="1-16" drill="0.35"/> -<via x="91.2" y="59.4" extent="1-16" drill="0.35"/> -<via x="87" y="59.4" extent="1-16" drill="0.35"/> -<via x="89.2" y="59.4" extent="1-16" drill="0.35"/> -<via x="85.8" y="60.9" extent="1-16" drill="0.35"/> -<via x="88.2" y="60.9" extent="1-16" drill="0.35"/> -<via x="90.3" y="60.9" extent="1-16" drill="0.35"/> -<via x="92.7" y="60.9" extent="1-16" drill="0.35"/> -<via x="95.4" y="29.1" extent="1-16" drill="0.35"/> -<via x="93.3" y="28.3" extent="1-16" drill="0.35"/> -<via x="91.4" y="27.5" extent="1-16" drill="0.35"/> -<via x="89.6" y="27.4" extent="1-16" drill="0.35"/> -<via x="88.5" y="40.9" extent="1-16" drill="0.35"/> -<via x="89.9" y="40.9" extent="1-16" drill="0.35"/> -<via x="89.2" y="41.5" extent="1-16" drill="0.35"/> -<via x="88.5" y="36" extent="1-16" drill="0.35"/> -<via x="89.9" y="36" extent="1-16" drill="0.35"/> -<via x="89.2" y="35.4" extent="1-16" drill="0.35"/> -<via x="88.5" y="48.8" extent="1-16" drill="0.35"/> -<via x="89.9" y="48.8" extent="1-16" drill="0.35"/> -<via x="89.2" y="49.7" extent="1-16" drill="0.35"/> -<via x="88.5" y="44" extent="1-16" drill="0.35"/> -<via x="89.9" y="44" extent="1-16" drill="0.35"/> -<via x="89.2" y="43.5" extent="1-16" drill="0.35"/> -<via x="88.5" y="52.5" extent="1-16" drill="0.35"/> -<via x="89.9" y="52.5" extent="1-16" drill="0.35"/> -<via x="89.2" y="51.9" extent="1-16" drill="0.35"/> -<via x="84.7" y="59.1" extent="1-16" drill="0.35"/> -<via x="83.4" y="60.9" extent="1-16" drill="0.35"/> -<wire x1="63.95" y1="21.5" x2="65.9" y2="21.5" width="0.1524" layer="1"/> +<wire x1="40.9" y1="10.75" x2="40.9" y2="12.15" width="0.4064" layer="1"/> +<via x="38.5" y="12.75" extent="1-16" drill="0.3"/> +<wire x1="38.5" y1="12.75" x2="32.2" y2="12.75" width="0.1524" layer="1"/> +<wire x1="40.9" y1="10.75" x2="41.242" y2="10.408" width="0.4064" layer="1"/> +<wire x1="41.242" y1="10.408" x2="41.242" y2="8.82264375" width="0.4064" layer="1"/> +<wire x1="41.242" y1="8.82264375" x2="41.57024375" y2="8.4944" width="0.4064" layer="1"/> +<wire x1="41.57024375" y1="8.4944" x2="45.48139375" y2="8.4944" width="0.4064" layer="1"/> +<wire x1="32.2" y1="12.75" x2="31.95" y2="12.5" width="0.1524" layer="1"/> +<contactref element="Q11" pad="P$5"/> +<contactref element="Q9" pad="P$5"/> +<contactref element="Q8" pad="P$5"/> +<polygon width="0.0762" layer="1" thermals="no" rank="5"> +<vertex x="62.5" y="54.5"/> +<vertex x="43.5" y="54.5"/> +<vertex x="43.5" y="49.5"/> +<vertex x="62.5" y="49.5"/> +<vertex x="62.5" y="-0.5"/> +<vertex x="84" y="-0.5"/> +<vertex x="84" y="54.5"/> +</polygon> +<via x="63.5" y="32.5" extent="1-16" drill="0.35"/> +<wire x1="41.9" y1="26.5" x2="41.9" y2="25.1" width="0.8128" layer="1"/> +<wire x1="41.9" y1="25.1" x2="48.084" y2="18.916" width="0.8128" layer="1"/> +<wire x1="48.084" y1="15.1271625" x2="47.8856" y2="14.9287625" width="0.8128" layer="1"/> +<wire x1="48.084" y1="18.916" x2="48.084" y2="15.1271625" width="0.8128" layer="1"/> +<wire x1="47.8856" y1="12.9346625" x2="48.1555" y2="12.6647625" width="0.8128" layer="1"/> +<wire x1="48.1555" y1="12.6647625" x2="48.1555" y2="11" width="0.8128" layer="1"/> +<wire x1="48.1555" y1="11" x2="48.1555" y2="9.6" width="0.8128" layer="1"/> +<wire x1="47.8856" y1="14.9287625" x2="47.8856" y2="12.9346625" width="0.8128" layer="1"/> +<wire x1="48.8555" y1="8.9" x2="52.7555" y2="5" width="0.8128" layer="1"/> +<wire x1="48.7055" y1="8.75" x2="48.8555" y2="8.9" width="0.4064" layer="1"/> +<wire x1="48.1555" y1="9.6" x2="48.52775" y2="9.22775" width="0.8128" layer="1"/> +<wire x1="48.52775" y1="9.22775" x2="48.8555" y2="8.9" width="0.8128" layer="1"/> +<wire x1="45.975" y1="11" x2="48.1555" y2="11" width="0.2032" layer="1"/> +<wire x1="48.4555" y1="9.3" x2="48.52775" y2="9.22775" width="0.4064" layer="1"/> +<wire x1="45.48139375" y1="8.4944" x2="46.28699375" y2="9.3" width="0.4064" layer="1"/> +<wire x1="46.28699375" y1="9.3" x2="48.4555" y2="9.3" width="0.4064" layer="1"/> +<via x="40.9" y="12.15" extent="1-16" drill="0.3"/> +<wire x1="40.9" y1="12.15" x2="40.3" y2="12.75" width="0.1524" layer="16"/> +<wire x1="40.3" y1="12.75" x2="38.5" y2="12.75" width="0.1524" layer="16"/> +<wire x1="64.9" y1="4.55765625" x2="64.9" y2="2.5" width="0.8128" layer="1"/> +<wire x1="64.45765625" y1="5" x2="64.9" y2="4.55765625" width="0.8128" layer="1"/> +<wire x1="52.7555" y1="5" x2="64.45765625" y2="5" width="0.8128" layer="1"/> +<contactref element="C5" pad="1"/> +<via x="64.5" y="32.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="32.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="32.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="32.5" extent="1-16" drill="0.35"/> +<via x="67" y="31.5" extent="1-16" drill="0.35"/> +<via x="66" y="31.5" extent="1-16" drill="0.35"/> +<via x="65" y="31.5" extent="1-16" drill="0.35"/> +<via x="64" y="31.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="67" y="29.5" extent="1-16" drill="0.35"/> +<via x="66" y="29.5" extent="1-16" drill="0.35"/> +<via x="65" y="29.5" extent="1-16" drill="0.35"/> +<via x="64" y="29.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="67" y="17.5" extent="1-16" drill="0.35"/> +<via x="66" y="17.5" extent="1-16" drill="0.35"/> +<via x="65" y="17.5" extent="1-16" drill="0.35"/> +<via x="64" y="17.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="67" y="15.5" extent="1-16" drill="0.35"/> +<via x="66" y="15.5" extent="1-16" drill="0.35"/> +<via x="65" y="15.5" extent="1-16" drill="0.35"/> +<via x="64" y="15.5" extent="1-16" drill="0.35"/> +<via x="70" y="18.5" extent="1-16" drill="0.35"/> +<via x="71" y="18.5" extent="1-16" drill="0.35"/> +<via x="72" y="18.5" extent="1-16" drill="0.35"/> +<via x="73" y="18.5" extent="1-16" drill="0.35"/> +<via x="74" y="18.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="72.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="71.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="70.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="70" y="16.5" extent="1-16" drill="0.35"/> +<via x="71" y="16.5" extent="1-16" drill="0.35"/> +<via x="72" y="16.5" extent="1-16" drill="0.35"/> +<via x="73" y="16.5" extent="1-16" drill="0.35"/> +<via x="74" y="16.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="72.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="71.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="70.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="70" y="32.5" extent="1-16" drill="0.35"/> +<via x="71" y="32.5" extent="1-16" drill="0.35"/> +<via x="72" y="32.5" extent="1-16" drill="0.35"/> +<via x="73" y="32.5" extent="1-16" drill="0.35"/> +<via x="74" y="32.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="72.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="71.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="70.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="70" y="30.5" extent="1-16" drill="0.35"/> +<via x="71" y="30.5" extent="1-16" drill="0.35"/> +<via x="72" y="30.5" extent="1-16" drill="0.35"/> +<via x="73" y="30.5" extent="1-16" drill="0.35"/> +<via x="74" y="30.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="72.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="71.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="70.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="46.5" extent="1-16" drill="0.35"/> +<via x="67" y="45.5" extent="1-16" drill="0.35"/> +<via x="66" y="45.5" extent="1-16" drill="0.35"/> +<via x="65" y="45.5" extent="1-16" drill="0.35"/> +<via x="64" y="45.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="44.5" extent="1-16" drill="0.35"/> +<via x="67" y="43.5" extent="1-16" drill="0.35"/> +<via x="66" y="43.5" extent="1-16" drill="0.35"/> +<via x="65" y="43.5" extent="1-16" drill="0.35"/> +<via x="64" y="43.5" extent="1-16" drill="0.35"/> +<via x="70" y="46.5" extent="1-16" drill="0.35"/> +<via x="71" y="46.5" extent="1-16" drill="0.35"/> +<via x="72" y="46.5" extent="1-16" drill="0.35"/> +<via x="73" y="46.5" extent="1-16" drill="0.35"/> +<via x="74" y="46.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="72.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="71.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="70.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="70" y="44.5" extent="1-16" drill="0.35"/> +<via x="71" y="44.5" extent="1-16" drill="0.35"/> +<via x="72" y="44.5" extent="1-16" drill="0.35"/> +<via x="73" y="44.5" extent="1-16" drill="0.35"/> +<via x="74" y="44.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="72.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="71.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="70.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="33.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="33.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="33.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="33.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="33.5" extent="1-16" drill="0.35"/> +<via x="70" y="33.5" extent="1-16" drill="0.35"/> +<via x="71" y="33.5" extent="1-16" drill="0.35"/> +<via x="72" y="33.5" extent="1-16" drill="0.35"/> +<via x="73" y="33.5" extent="1-16" drill="0.35"/> +<via x="74" y="33.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="19.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="19.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="19.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="19.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="19.5" extent="1-16" drill="0.35"/> +<via x="70" y="19.5" extent="1-16" drill="0.35"/> +<via x="71" y="19.5" extent="1-16" drill="0.35"/> +<via x="72" y="19.5" extent="1-16" drill="0.35"/> +<via x="73" y="19.5" extent="1-16" drill="0.35"/> +<via x="74" y="19.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="48" extent="1-16" drill="0.35"/> +<via x="64.5" y="48" extent="1-16" drill="0.35"/> +<via x="65.5" y="48" extent="1-16" drill="0.35"/> +<via x="66.5" y="48" extent="1-16" drill="0.35"/> +<via x="67.5" y="48" extent="1-16" drill="0.35"/> +<via x="70" y="48" extent="1-16" drill="0.35"/> +<via x="71" y="48" extent="1-16" drill="0.35"/> +<via x="72" y="48" extent="1-16" drill="0.35"/> +<via x="73" y="48" extent="1-16" drill="0.35"/> +<via x="74" y="48" extent="1-16" drill="0.35"/> +<via x="82" y="28.5" extent="1-16" drill="0.35"/> +<via x="82" y="29.5" extent="1-16" drill="0.35"/> +<via x="82" y="19.5" extent="1-16" drill="0.35"/> +<via x="82" y="18.5" extent="1-16" drill="0.35"/> +<via x="82" y="47.5" extent="1-16" drill="0.35"/> +<via x="73.5" y="53" extent="1-16" drill="0.35"/> +<via x="70.5" y="50" extent="1-16" drill="0.35"/> +<via x="63" y="52" extent="1-16" drill="0.35"/> +<via x="63" y="50.5" extent="1-16" drill="0.35"/> +<via x="68" y="15.5" extent="1-16" drill="0.35"/> +<via x="68" y="17.5" extent="1-16" drill="0.35"/> +<via x="63" y="17.5" extent="1-16" drill="0.35"/> +<via x="63" y="15.5" extent="1-16" drill="0.35"/> +<via x="69.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="69.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="74.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="74.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="68" y="31.5" extent="1-16" drill="0.35"/> +<via x="68" y="29.5" extent="1-16" drill="0.35"/> +<via x="63" y="29.5" extent="1-16" drill="0.35"/> +<via x="63" y="31.5" extent="1-16" drill="0.35"/> +<via x="69.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="69.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="74.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="74.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="68" y="45.5" extent="1-16" drill="0.35"/> +<via x="68" y="43.5" extent="1-16" drill="0.35"/> +<via x="63" y="45.5" extent="1-16" drill="0.35"/> +<via x="63" y="43.5" extent="1-16" drill="0.35"/> +<via x="69.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="69.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="74.5" y="45.5" extent="1-16" drill="0.35"/> +<via x="74.5" y="43.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="42.5" extent="1-16" drill="0.35"/> +<via x="70" y="42.5" extent="1-16" drill="0.35"/> +<via x="71" y="42.5" extent="1-16" drill="0.35"/> +<via x="72" y="42.5" extent="1-16" drill="0.35"/> +<via x="73" y="42.5" extent="1-16" drill="0.35"/> +<via x="74" y="42.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="70" y="28.5" extent="1-16" drill="0.35"/> +<via x="71" y="28.5" extent="1-16" drill="0.35"/> +<via x="72" y="28.5" extent="1-16" drill="0.35"/> +<via x="73" y="28.5" extent="1-16" drill="0.35"/> +<via x="74" y="28.5" extent="1-16" drill="0.35"/> +<via x="63.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="64.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="65.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="66.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="67.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="70" y="14.5" extent="1-16" drill="0.35"/> +<via x="71" y="14.5" extent="1-16" drill="0.35"/> +<via x="72" y="14.5" extent="1-16" drill="0.35"/> +<via x="73" y="14.5" extent="1-16" drill="0.35"/> +<via x="74" y="14.5" extent="1-16" drill="0.35"/> +<polygon width="0.0762" layer="16" thermals="no" rank="4"> +<vertex x="62.5" y="49.5"/> +<vertex x="69.5" y="49.5"/> +<vertex x="69.5" y="55"/> +<vertex x="84.5" y="55"/> +<vertex x="84.5" y="-1"/> +<vertex x="62.5" y="-1"/> +</polygon> +<wire x1="57.6" y1="4.4" x2="59.6" y2="4.4" width="0" layer="19" extent="1-1"/> +<wire x1="55.6" y1="4.4" x2="57.6" y2="4.4" width="0" layer="19" extent="1-1"/> +<wire x1="53.6" y1="4.4" x2="55.6" y2="4.4" width="0" layer="19" extent="1-1"/> +<wire x1="52.7555" y1="5" x2="53.6" y2="4.4" width="0" layer="19" extent="1-1"/> </signal> <signal name="DRV-HI-U"> <contactref element="R24" pad="1"/> <contactref element="U2" pad="P$47"/> -<wire x1="73.49999375" y1="48.99999375" x2="76.29999375" y2="48.99999375" width="0.2032" layer="1"/> -<via x="78.36393125" y="51.758" extent="1-16" drill="0.35"/> -<wire x1="76.7652" y1="50.52625" x2="76.94375" y2="50.7048" width="0.2032" layer="1"/> -<wire x1="76.7652" y1="49.4652" x2="76.7652" y2="50.52625" width="0.2032" layer="1"/> -<wire x1="76.94375" y1="50.7048" x2="77.31073125" y2="50.7048" width="0.2032" layer="1"/> -<wire x1="77.31073125" y1="50.7048" x2="78.36393125" y2="51.758" width="0.2032" layer="1"/> -<wire x1="76.29999375" y1="48.99999375" x2="76.7652" y2="49.4652" width="0.2032" layer="1"/> -<via x="80.065" y="53.046" extent="1-16" drill="0.35"/> -<wire x1="78.36393125" y1="51.758" x2="78.6832625" y2="51.758" width="0.2032" layer="16"/> -<wire x1="78.6832625" y1="51.758" x2="79.0970625" y2="52.1718" width="0.2032" layer="16"/> -<wire x1="79.0970625" y1="52.1718" x2="79.1908" y2="52.1718" width="0.2032" layer="16"/> -<wire x1="79.1908" y1="52.1718" x2="80.065" y2="53.046" width="0.2032" layer="16"/> +<wire x1="41.49999375" y1="39.99999375" x2="44.29999375" y2="39.99999375" width="0.2032" layer="1"/> +<wire x1="44.7652" y1="41.52625" x2="44.94375" y2="41.7048" width="0.2032" layer="1"/> +<wire x1="44.7652" y1="40.4652" x2="44.7652" y2="41.52625" width="0.2032" layer="1"/> +<wire x1="44.29999375" y1="39.99999375" x2="44.7652" y2="40.4652" width="0.2032" layer="1"/> +<wire x1="44.94375" y1="41.7048" x2="47.3048" y2="41.7048" width="0.2032" layer="1"/> +<wire x1="47.3048" y1="41.7048" x2="50.15" y2="44.55" width="0.2032" layer="1"/> </signal> <signal name="DRV-LO-U"> <contactref element="R25" pad="1"/> <contactref element="U2" pad="P$45"/> -<wire x1="73.49999375" y1="47.999996875" x2="73.555490625" y2="48.05549375" width="0.2032" layer="1"/> -<wire x1="73.555490625" y1="48.05549375" x2="74.40094375" y2="48.05549375" width="0.2032" layer="1"/> -<wire x1="74.40094375" y1="48.05549375" x2="74.49454375" y2="48.14909375" width="0.2032" layer="1"/> -<wire x1="77.578" y1="49.128525" x2="77.578" y2="49.2952" width="0.2032" layer="1"/> -<wire x1="76.59856875" y1="48.14909375" x2="77.578" y2="49.128525" width="0.2032" layer="1"/> -<wire x1="74.49454375" y1="48.14909375" x2="76.59856875" y2="48.14909375" width="0.2032" layer="1"/> -<wire x1="78.15625" y1="49.2952" x2="77.578" y2="49.2952" width="0.2032" layer="1"/> -<wire x1="80.065" y1="54.87705" x2="80.065" y2="54.887" width="0.2032" layer="1"/> -<wire x1="80.065" y1="54.87705" x2="79.1102" y2="53.92225" width="0.2032" layer="1"/> -<wire x1="79.1102" y1="53.92225" x2="79.1102" y2="50.24915" width="0.2032" layer="1"/> -<wire x1="79.1102" y1="50.24915" x2="78.15625" y2="49.2952" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="38.999996875" x2="41.555490625" y2="39.05549375" width="0.2032" layer="1"/> +<wire x1="41.555490625" y1="39.05549375" x2="42.40094375" y2="39.05549375" width="0.2032" layer="1"/> +<wire x1="42.40094375" y1="39.05549375" x2="42.49454375" y2="39.14909375" width="0.2032" layer="1"/> +<wire x1="42.49454375" y1="39.14909375" x2="44.59856875" y2="39.14909375" width="0.2032" layer="1"/> +<wire x1="44.59856875" y1="39.14909375" x2="46.65090625" y2="39.14909375" width="0.2032" layer="1"/> +<wire x1="46.65090625" y1="39.14909375" x2="49.046" y2="36.754" width="0.2032" layer="1"/> +<wire x1="49.046" y1="35.6831625" x2="49.3556" y2="35.3735625" width="0.2032" layer="1"/> +<wire x1="49.3556" y1="34.7444" x2="50.15" y2="33.95" width="0.2032" layer="1"/> +<wire x1="49.3556" y1="35.3735625" x2="49.3556" y2="34.7444" width="0.2032" layer="1"/> +<wire x1="49.046" y1="36.754" x2="49.046" y2="35.6831625" width="0.2032" layer="1"/> </signal> <signal name="SL-V"> <contactref element="U2" pad="P$39"/> -<contactref element="R4" pad="B"/> -<contactref element="U$10" pad="PGND"/> -<polygon width="0.2032" layer="1" thermals="no"> -<vertex x="81.4" y="47.9"/> -<vertex x="84.6" y="47.9"/> -<vertex x="85.8" y="49.1"/> -<vertex x="85.9" y="49.1"/> -<vertex x="87.3" y="49.1"/> -<vertex x="87.4" y="49"/> -<vertex x="87.4" y="43.8"/> -<vertex x="87.4" y="43.7"/> -<vertex x="87.3" y="43.6"/> -<vertex x="81.4" y="43.6"/> -</polygon> -<wire x1="77.34854375" y1="44.72461875" x2="76.15145625" y2="44.72461875" width="0.2032" layer="1"/> -<wire x1="75.800075" y1="45.076" x2="76.15145625" y2="44.72461875" width="0.2032" layer="1"/> -<wire x1="79.069125" y1="46.4452" x2="77.34854375" y2="44.72461875" width="0.2032" layer="1"/> -<wire x1="79.069125" y1="46.4452" x2="80.97625" y2="46.4452" width="0.2032" layer="1"/> -<wire x1="73.49999375" y1="45.000003125" x2="74.600003125" y2="45.000003125" width="0.2032" layer="1"/> -<wire x1="74.600003125" y1="45.000003125" x2="74.6936" y2="45.0936" width="0.2032" layer="1"/> -<wire x1="74.6936" y1="45.0936" x2="74.8" y2="45.0936" width="0.2032" layer="1"/> -<wire x1="74.8" y1="45.0936" x2="74.8176" y2="45.076" width="0.2032" layer="1"/> -<wire x1="74.8176" y1="45.076" x2="75.800075" y2="45.076" width="0.2032" layer="1"/> -<wire x1="81.48105" y1="46.95" x2="83" y2="46.95" width="0.2032" layer="1"/> -<wire x1="80.97625" y1="46.4452" x2="81.48105" y2="46.95" width="0.2032" layer="1"/> -<polygon width="0.2032" layer="16" thermals="no" rank="3"> -<vertex x="87.3" y="48.5"/> -<vertex x="87.3" y="44"/> -<vertex x="85.9" y="44"/> -<vertex x="85.9" y="48.5"/> +<contactref element="Q3" pad="P$3"/> +<contactref element="Q3" pad="P$2"/> +<contactref element="Q3" pad="P$1"/> +<wire x1="41.49999375" y1="36.000003125" x2="43.947909375" y2="36.000003125" width="0.2032" layer="1"/> +<wire x1="43.947909375" y1="36.000003125" x2="44.17249375" y2="35.77541875" width="0.2032" layer="1"/> +<contactref element="R5" pad="A"/> +<wire x1="47.44504375" y1="35.77541875" x2="48.2888" y2="34.9316625" width="0.2032" layer="1"/> +<wire x1="48.2888" y1="28.3321875" x2="48.6904" y2="27.9305875" width="0.2032" layer="1"/> +<wire x1="48.2888" y1="34.9316625" x2="48.2888" y2="28.3321875" width="0.2032" layer="1"/> +<wire x1="48.6904" y1="27.9305875" x2="48.6904" y2="24.6" width="0.2032" layer="1"/> +<wire x1="48.6904" y1="24.6" x2="48.4896" y2="24.3992" width="0.2032" layer="1"/> +<wire x1="48.4896" y1="24.3992" x2="48.4896" y2="24.3" width="0.2032" layer="1"/> +<via x="48.4896" y="24.3" extent="1-16" drill="0.3"/> +<wire x1="48.4896" y1="24.3" x2="48.5896" y2="24.2" width="0.2032" layer="16"/> +<wire x1="44.17249375" y1="35.77541875" x2="47.44504375" y2="35.77541875" width="0.2032" layer="1"/> +<contactref element="Q10" pad="P$1"/> +<contactref element="Q10" pad="P$2"/> +<contactref element="Q10" pad="P$3"/> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="56.5" y="34.2"/> +<vertex x="53.5" y="34.2"/> +<vertex x="53.5" y="27"/> +<vertex x="50.5" y="27"/> +<vertex x="50.5" y="25"/> +<vertex x="49.5" y="25"/> +<vertex x="49.5" y="19.5"/> +<vertex x="56.5" y="19.5"/> </polygon> -<via x="86.3" y="48" extent="1-16" drill="0.35"/> -<via x="87" y="48" extent="1-16" drill="0.35"/> -<via x="86.3" y="47.2" extent="1-16" drill="0.35"/> -<via x="87" y="47.2" extent="1-16" drill="0.35"/> -<via x="86.3" y="46.4" extent="1-16" drill="0.35"/> -<via x="87" y="46.4" extent="1-16" drill="0.35"/> -<via x="86.3" y="45.6" extent="1-16" drill="0.35"/> -<via x="87" y="45.6" extent="1-16" drill="0.35"/> -<via x="86.3" y="44.8" extent="1-16" drill="0.35"/> -<via x="87" y="44.8" extent="1-16" drill="0.35"/> +<wire x1="48.4896" y1="24.3" x2="48.9896" y2="23.8" width="0.2032" layer="16"/> +<wire x1="48.9896" y1="23.8" x2="49.9" y2="23.8" width="0.2032" layer="16"/> +<via x="49.9" y="23.8" extent="1-16" drill="0.3"/> </signal> <signal name="SHNT-V-HI"> -<contactref element="R18" pad="1"/> -<contactref element="R4" pad="SB"/> -<via x="81.7" y="45.536" extent="1-16" drill="0.35"/> -<wire x1="81.7" y1="45.536" x2="80.336" y2="45.536" width="0.2032" layer="16"/> -<wire x1="79.5292375" y1="44.7292375" x2="79.5292375" y2="44.54109375" width="0.2032" layer="16"/> -<wire x1="76.52100625" y1="41.09473125" x2="76.3131375" y2="40.8868625" width="0.2032" layer="16"/> -<wire x1="76.52100625" y1="41.5328625" x2="76.52100625" y2="41.09473125" width="0.2032" layer="16"/> -<wire x1="79.5292375" y1="44.54109375" x2="76.52100625" y2="41.5328625" width="0.2032" layer="16"/> -<wire x1="80.336" y1="45.536" x2="79.5292375" y2="44.7292375" width="0.2032" layer="16"/> -<wire x1="76.3131375" y1="31.4131375" x2="74" y2="29.1" width="0.2032" layer="16"/> -<wire x1="74" y1="29.1" x2="67.1" y2="29.1" width="0.2032" layer="16"/> -<via x="67.1" y="29.1" extent="1-16" drill="0.35"/> -<wire x1="67.1" y1="29.1" x2="67.1" y2="33.35" width="0.2032" layer="1"/> -<wire x1="76.3131375" y1="40.8868625" x2="76.3131375" y2="31.4131375" width="0.2032" layer="16"/> +<contactref element="R20" pad="1"/> +<contactref element="R5" pad="SA"/> +<wire x1="50.1" y1="25.586" x2="50.1" y2="26.2" width="0.2032" layer="1"/> +<via x="50.1" y="26.2" extent="1-16" drill="0.3"/> +<wire x1="47.1" y1="23.2" x2="38.9" y2="23.2" width="0.2032" layer="16"/> +<wire x1="48.25913125" y1="24.8564" x2="47.9332" y2="24.53046875" width="0.2032" layer="16"/> +<wire x1="50.1" y1="26.2" x2="48.7564" y2="24.8564" width="0.2032" layer="16"/> +<wire x1="47.9332" y1="24.0332" x2="47.1" y2="23.2" width="0.2032" layer="16"/> +<wire x1="48.7564" y1="24.8564" x2="48.25913125" y2="24.8564" width="0.2032" layer="16"/> +<wire x1="47.9332" y1="24.53046875" x2="47.9332" y2="24.0332" width="0.2032" layer="16"/> +<wire x1="38.9" y1="23.2" x2="38.5" y2="23.6" width="0.2032" layer="16"/> +<wire x1="38.5" y1="23.6" x2="38.5" y2="24.35" width="0.2032" layer="16"/> +<via x="38.5" y="24.35" extent="1-16" drill="0.3"/> </signal> <signal name="SHNT-V-LO"> -<contactref element="R19" pad="1"/> -<contactref element="R4" pad="SA"/> -<via x="81.7" y="42.736" extent="1-16" drill="0.35"/> -<wire x1="81.7" y1="42.736" x2="80.336" y2="42.736" width="0.2032" layer="16"/> -<wire x1="78.7524" y1="41.1524" x2="78.7524" y2="41.0190625" width="0.2032" layer="16"/> -<wire x1="80.336" y1="42.736" x2="78.7524" y2="41.1524" width="0.2032" layer="16"/> -<wire x1="78.7524" y1="41.0190625" x2="76.7195375" y2="38.9862" width="0.2032" layer="16"/> -<wire x1="76.7195375" y1="31.2448" x2="74.1683375" y2="28.6936" width="0.2032" layer="16"/> -<wire x1="69.0258" y1="28.6936" x2="68.8" y2="28.4678" width="0.2032" layer="16"/> -<via x="68.8" y="28.4678" extent="1-16" drill="0.35"/> -<wire x1="68.8" y1="28.4678" x2="68.8" y2="33.35" width="0.2032" layer="1"/> -<wire x1="76.7195375" y1="38.9862" x2="76.7195375" y2="31.2448" width="0.2032" layer="16"/> -<wire x1="74.1683375" y1="28.6936" x2="69.0258" y2="28.6936" width="0.2032" layer="16"/> +<contactref element="R21" pad="1"/> +<contactref element="R5" pad="SB"/> +<wire x1="50.1" y1="28.386" x2="50.1" y2="27.7" width="0.2032" layer="1"/> +<via x="50.1" y="27.7" extent="1-16" drill="0.3"/> +<wire x1="50.1" y1="27.7" x2="49.5" y2="27.1" width="0.2032" layer="16"/> +<wire x1="49.5" y1="27.1" x2="49.5" y2="26.1029" width="0.2032" layer="16"/> +<wire x1="49.5" y1="26.1029" x2="48.6091" y2="25.212" width="0.2032" layer="16"/> +<wire x1="48.11183125" y1="25.212" x2="47.5776" y2="24.67776875" width="0.2032" layer="16"/> +<wire x1="47.5776" y1="24.67776875" x2="47.5776" y2="24.1805" width="0.2032" layer="16"/> +<wire x1="48.6091" y1="25.212" x2="48.11183125" y2="25.212" width="0.2032" layer="16"/> +<wire x1="46.9527" y1="23.5556" x2="40.7" y2="23.5556" width="0.2032" layer="16"/> +<wire x1="47.5776" y1="24.1805" x2="46.9527" y2="23.5556" width="0.2032" layer="16"/> +<wire x1="40.7" y1="23.5556" x2="40.2" y2="24.0556" width="0.2032" layer="16"/> +<wire x1="40.2" y1="24.0556" x2="40.2" y2="24.35" width="0.2032" layer="16"/> +<via x="40.2" y="24.35" extent="1-16" drill="0.3"/> +<wire x1="40.2" y1="24.35" x2="40.1" y2="24.35" width="0" layer="19" extent="1-16"/> </signal> <signal name="PHASE-V"> <contactref element="R31" pad="2"/> <contactref element="U2" pad="P$41"/> <contactref element="C32" pad="2"/> -<contactref element="U$10" pad="VSW"/> <contactref element="J10" pad="P$1"/> -<contactref element="U$10" pad="SH"/> -<via x="77.55" y="47" extent="1-16" drill="0.35"/> -<wire x1="73.49999375" y1="46" x2="75.0642125" y2="46" width="0.2032" layer="1"/> -<wire x1="75.0642125" y1="46" x2="75.1754125" y2="45.8888" width="0.2032" layer="1"/> -<wire x1="75.1754125" y1="45.8888" x2="76.13675" y2="45.8888" width="0.2032" layer="1"/> -<wire x1="76.48813125" y1="45.53741875" x2="77.01186875" y2="45.53741875" width="0.2032" layer="1"/> -<wire x1="77.01186875" y1="45.53741875" x2="77.3822" y2="45.90775" width="0.2032" layer="1"/> -<wire x1="77.3822" y1="46.8322" x2="77.55" y2="47" width="0.2032" layer="1"/> -<wire x1="77.3822" y1="45.90775" x2="77.3822" y2="46.8322" width="0.2032" layer="1"/> -<wire x1="76.13675" y1="45.8888" x2="76.48813125" y2="45.53741875" width="0.2032" layer="1"/> -<wire x1="92.37625" y1="43.6798" x2="92.5548" y2="43.50125" width="0.2032" layer="1"/> -<wire x1="92.0445875" y1="41.8138" x2="90.9554125" y2="41.8138" width="0.2032" layer="1"/> -<wire x1="90.9554125" y1="41.8138" x2="90.4756125" y2="42.2936" width="0.2032" layer="1"/> -<wire x1="91.75" y1="43.75" x2="91.8202" y2="43.6798" width="0.2032" layer="1"/> -<wire x1="91.8202" y1="43.6798" x2="92.37625" y2="43.6798" width="0.2032" layer="1"/> -<wire x1="92.5548" y1="43.50125" x2="92.5548" y2="42.3240125" width="0.2032" layer="1"/> -<wire x1="92.5548" y1="42.3240125" x2="92.0445875" y2="41.8138" width="0.2032" layer="1"/> -<wire x1="90.4756125" y1="42.2936" x2="88.0243875" y2="42.2936" width="0.2032" layer="1"/> -<wire x1="88.0243875" y1="42.2936" x2="87.5445875" y2="41.8138" width="0.2032" layer="1"/> -<wire x1="87.5445875" y1="41.8138" x2="86.3114625" y2="41.8138" width="0.2032" layer="1"/> -<wire x1="86.3114625" y1="41.8138" x2="85.36263125" y2="42.76263125" width="0.2032" layer="1"/> -<wire x1="85.36263125" y1="42.76263125" x2="83.34003125" y2="42.76263125" width="0.2032" layer="1"/> -<wire x1="83.34003125" y1="42.76263125" x2="82.558" y2="42.7806" width="0.2032" layer="1"/> -<via x="82.558" y="42.7806" extent="1-16" drill="0.35"/> -<wire x1="81.96186875" y1="46.1682" x2="81.43813125" y2="46.1682" width="0.2032" layer="16"/> -<wire x1="81.43813125" y1="46.1682" x2="81.21233125" y2="45.9424" width="0.2032" layer="16"/> -<wire x1="82.558" y1="45.57206875" x2="81.96186875" y2="46.1682" width="0.2032" layer="16"/> -<wire x1="82.558" y1="42.7806" x2="82.558" y2="45.57206875" width="0.2032" layer="16"/> -<wire x1="78.6076" y1="45.9424" x2="77.55" y2="47" width="0.2032" layer="16"/> -<wire x1="81.21233125" y1="45.9424" x2="78.6076" y2="45.9424" width="0.2032" layer="16"/> -<polygon width="0.2032" layer="16" rank="3"> -<vertex x="100.5" y="51.1"/> -<vertex x="94.2" y="51.1"/> -<vertex x="94.2" y="48.6"/> -<vertex x="91.3" y="48.6"/> -<vertex x="91.2" y="48.5"/> -<vertex x="91.2" y="43"/> -<vertex x="94.2" y="43"/> -<vertex x="94.2" y="40.8"/> -<vertex x="100.5" y="40.8"/> +<contactref element="Q3" pad="P$5"/> +<contactref element="Q4" pad="P$3"/> +<contactref element="Q4" pad="P$2"/> +<contactref element="Q4" pad="P$1"/> +<wire x1="43.19645" y1="36.9396" x2="43.13605" y2="37" width="0.2032" layer="1"/> +<wire x1="43.13605" y1="37" x2="41.49999375" y2="37" width="0.2032" layer="1"/> +<wire x1="45.55" y1="38" x2="45.3314" y2="37.7814" width="0.2032" layer="1"/> +<wire x1="44.15779375" y1="36.9396" x2="43.19645" y2="36.9396" width="0.2032" layer="1"/> +<wire x1="44.15779375" y1="36.9396" x2="44.509175" y2="36.58821875" width="0.2032" layer="1"/> +<wire x1="45.55" y1="38" x2="46.7942" y2="38" width="0.2032" layer="1"/> +<wire x1="47.8501625" y1="36.9440375" x2="47.8501625" y2="36.6" width="0.2032" layer="1"/> +<wire x1="47.8501625" y1="36.6" x2="47.8501625" y2="36.3761" width="0.2032" layer="1"/> +<wire x1="47.8501625" y1="36.3761" x2="49" y2="35.2262625" width="0.2032" layer="1"/> +<wire x1="46.7942" y1="38" x2="47.8501625" y2="36.9440375" width="0.2032" layer="1"/> +<contactref element="Q9" pad="P$1"/> +<contactref element="Q9" pad="P$2"/> +<contactref element="Q9" pad="P$3"/> +<contactref element="Q10" pad="P$5"/> +<polygon width="0.0762" layer="1" thermals="no" rank="4"> +<vertex x="56.5" y="34.2"/> +<vertex x="56.5" y="19.5"/> +<vertex x="62.5" y="19.5"/> +<vertex x="62.5" y="20.4"/> +<vertex x="63.4" y="20.4"/> +<vertex x="83.5" y="20.4"/> +<vertex x="83.5" y="27.3"/> +<vertex x="62.5" y="27.3"/> +<vertex x="62.5" y="34"/> +<vertex x="62.5" y="34.2"/> </polygon> -<polygon width="0.2032" layer="1" thermals="no" rank="3"> -<vertex x="100.5" y="51.1"/> -<vertex x="91.2" y="51.1"/> -<vertex x="91.2" y="44.2"/> -<vertex x="92.5" y="44.2"/> -<vertex x="93" y="43.7"/> -<vertex x="93" y="42.1"/> -<vertex x="92.3" y="41.4"/> -<vertex x="91.2" y="41.4"/> -<vertex x="91.2" y="40.9"/> -<vertex x="91.3" y="40.8"/> -<vertex x="100.5" y="40.8"/> +<via x="57" y="33.5" extent="1-16" drill="0.3"/> +<wire x1="49" y1="35.2262625" x2="49" y2="33.7907875" width="0.2032" layer="1"/> +<wire x1="49" y1="33.7907875" x2="49.6947875" y2="33.096" width="0.2032" layer="1"/> +<wire x1="52.5052125" y1="33.096" x2="53.0036125" y2="33.5944" width="0.2032" layer="1"/> +<wire x1="49.6947875" y1="33.096" x2="52.5052125" y2="33.096" width="0.2032" layer="1"/> +<wire x1="54.2023" y1="33.5944" x2="54.65395" y2="34.04605" width="0.2032" layer="1"/> +<wire x1="53.0036125" y1="33.5944" x2="54.2023" y2="33.5944" width="0.2032" layer="1"/> +<wire x1="54.65395" y1="34.04605" x2="56.45395" y2="34.04605" width="0.2032" layer="1"/> +<wire x1="56.45395" y1="34.04605" x2="57" y2="33.5" width="0.2032" layer="1"/> +<wire x1="47.83838125" y1="36.58821875" x2="47.8501625" y2="36.6" width="0.2032" layer="1"/> +<wire x1="44.509175" y1="36.58821875" x2="47.83838125" y2="36.58821875" width="0.2032" layer="1"/> +<wire x1="52.6064" y1="20.73046875" x2="52.6064" y2="20.4465" width="0.2032" layer="16"/> +<wire x1="52.318434375" y1="21.018434375" x2="52.6064" y2="20.73046875" width="0.2032" layer="16"/> +<wire x1="52.6064" y1="20.4465" x2="53.2973" y2="19.7556" width="0.2032" layer="16"/> +<wire x1="56.7556" y1="19.7556" x2="57.5" y2="20.5" width="0.2032" layer="16"/> +<wire x1="53.2973" y1="19.7556" x2="56.7556" y2="19.7556" width="0.2032" layer="16"/> +<wire x1="31.95" y1="20.5" x2="33.5944" y2="18.8556" width="0.2032" layer="1"/> +<wire x1="45.36873125" y1="18.8556" x2="45.706565625" y2="19.193434375" width="0.2032" layer="1"/> +<via x="45.706565625" y="19.193434375" extent="1-16" drill="0.3"/> +<wire x1="45.706565625" y1="19.193434375" x2="46.31313125" y2="19.8" width="0.2032" layer="16"/> +<wire x1="46.31313125" y1="19.8" x2="46.5971" y2="19.8" width="0.2032" layer="16"/> +<wire x1="48.8984" y1="20.8984" x2="48.9" y2="20.9" width="0.2032" layer="16"/> +<wire x1="47.6955" y1="20.8984" x2="48.8984" y2="20.8984" width="0.2032" layer="16"/> +<wire x1="46.5971" y1="19.8" x2="47.6955" y2="20.8984" width="0.2032" layer="16"/> +<wire x1="51.66313125" y1="20.9" x2="51.81953125" y2="21.0564" width="0.2032" layer="16"/> +<wire x1="51.81953125" y1="21.0564" x2="52.28046875" y2="21.0564" width="0.2032" layer="16"/> +<wire x1="52.28046875" y1="21.0564" x2="52.318434375" y2="21.018434375" width="0.2032" layer="16"/> +<wire x1="48.9" y1="20.9" x2="51.66313125" y2="20.9" width="0.2032" layer="16"/> +<wire x1="33.5944" y1="18.8556" x2="45.36873125" y2="18.8556" width="0.2032" layer="1"/> +<via x="61.5" y="32" extent="1-16" drill="0.35"/> +<via x="61.5" y="31" extent="1-16" drill="0.35"/> +<via x="61.5" y="30" extent="1-16" drill="0.35"/> +<via x="61.5" y="29" extent="1-16" drill="0.35"/> +<via x="61.5" y="28" extent="1-16" drill="0.35"/> +<via x="60.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="32" extent="1-16" drill="0.35"/> +<via x="59.5" y="31" extent="1-16" drill="0.35"/> +<via x="59.5" y="30" extent="1-16" drill="0.35"/> +<via x="59.5" y="29" extent="1-16" drill="0.35"/> +<via x="59.5" y="28" extent="1-16" drill="0.35"/> +<via x="58.5" y="28.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="29.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="30.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="31.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="25.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="24.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="23.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="22.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="21.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="22" extent="1-16" drill="0.35"/> +<via x="60.5" y="23" extent="1-16" drill="0.35"/> +<via x="60.5" y="24" extent="1-16" drill="0.35"/> +<via x="60.5" y="25" extent="1-16" drill="0.35"/> +<via x="59.5" y="25.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="24.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="23.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="22.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="21.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="22" extent="1-16" drill="0.35"/> +<via x="58.5" y="23" extent="1-16" drill="0.35"/> +<via x="58.5" y="24" extent="1-16" drill="0.35"/> +<via x="58.5" y="25" extent="1-16" drill="0.35"/> +<polygon width="0.0762" layer="16" thermals="no" rank="3"> +<vertex x="67" y="20.5"/> +<vertex x="62.5" y="20.5"/> +<vertex x="62.5" y="19.5"/> +<vertex x="53.5" y="19.5"/> +<vertex x="53.5" y="34"/> +<vertex x="62.5" y="34"/> +<vertex x="62.5" y="27"/> +<vertex x="67" y="27"/> </polygon> -<via x="91.5" y="48" extent="1-16" drill="0.35"/> -<wire x1="79.1588" y1="40.9840625" x2="80.5043375" y2="42.3296" width="0.2032" layer="16"/> -<wire x1="79.1588" y1="40.9840625" x2="79.1588" y2="40.850725" width="0.2032" layer="16"/> -<wire x1="79.1588" y1="40.850725" x2="77.1259375" y2="38.8178625" width="0.2032" layer="16"/> -<wire x1="77.1259375" y1="31.0764625" x2="74.336675" y2="28.2872" width="0.2032" layer="16"/> -<wire x1="74.336675" y1="28.2872" x2="69.5" y2="28.2872" width="0.2032" layer="16"/> -<wire x1="69.4322" y1="28.20593125" x2="69.06186875" y2="27.8356" width="0.2032" layer="16"/> -<wire x1="69.5" y1="28.2872" x2="69.4322" y2="28.2194" width="0.2032" layer="16"/> -<wire x1="69.4322" y1="28.2194" x2="69.4322" y2="28.20593125" width="0.2032" layer="16"/> -<wire x1="69.06186875" y1="27.8356" x2="68.4644" y2="27.8356" width="0.2032" layer="16"/> -<wire x1="67.8322" y1="28.4678" x2="66.83813125" y2="28.4678" width="0.2032" layer="16"/> -<wire x1="68.4644" y1="27.8356" x2="67.8322" y2="28.4678" width="0.2032" layer="16"/> -<wire x1="77.1259375" y1="38.8178625" x2="77.1259375" y2="31.0764625" width="0.2032" layer="16"/> -<via x="92.2" y="48" extent="1-16" drill="0.35"/> -<via x="91.5" y="47.2" extent="1-16" drill="0.35"/> -<via x="92.2" y="47.2" extent="1-16" drill="0.35"/> -<via x="91.5" y="46.4" extent="1-16" drill="0.35"/> -<via x="92.2" y="46.4" extent="1-16" drill="0.35"/> -<via x="91.5" y="45.6" extent="1-16" drill="0.35"/> -<via x="92.2" y="45.6" extent="1-16" drill="0.35"/> -<via x="91.5" y="44.8" extent="1-16" drill="0.35"/> -<via x="92.2" y="44.8" extent="1-16" drill="0.35"/> -<via x="93.3" y="48" extent="1-16" drill="0.35"/> -<via x="93.2" y="44.8" extent="1-16" drill="0.35"/> -<via x="93.2" y="46.4" extent="1-16" drill="0.35"/> -<via x="95" y="49.4" extent="1-16" drill="0.35"/> -<via x="95.5" y="42.4" extent="1-16" drill="0.35"/> -<via x="93.8" y="43.6" extent="1-16" drill="0.35"/> -<via x="96.5" y="49.9" extent="1-16" drill="0.35"/> -<via x="97.6" y="42.1" extent="1-16" drill="0.35"/> -<via x="98.5" y="49.8" extent="1-16" drill="0.35"/> -<via x="99" y="42.5" extent="1-16" drill="0.35"/> -<via x="94.8" y="50.4" extent="1-16" drill="0.35"/> -<via x="94.9" y="41.3" extent="1-16" drill="0.35"/> -<wire x1="66.83813125" y1="28.4678" x2="64.9822" y2="28.4678" width="0.1524" layer="16"/> -<wire x1="64.9822" y1="28.4678" x2="63.95" y2="29.5" width="0.1524" layer="16"/> -<via x="63.95" y="29.5" extent="1-16" drill="0.3"/> -<wire x1="80.5043375" y1="42.3296" x2="81.32009375" y2="42.3296" width="0.1524" layer="16"/> -<wire x1="81.32009375" y1="42.3296" x2="81.46969375" y2="42.18" width="0.1524" layer="16"/> -<wire x1="81.46969375" y1="42.18" x2="81.9574" y2="42.18" width="0.1524" layer="16"/> -<wire x1="81.9574" y1="42.18" x2="82.558" y2="42.7806" width="0.1524" layer="16"/> -<wire x1="91.5" y1="44.8" x2="91.75" y2="43.75" width="0" layer="19" extent="1-1"/> +<via x="66" y="25.5" extent="1-16" drill="0.35"/> +<via x="66" y="24.5" extent="1-16" drill="0.35"/> +<via x="66" y="23.5" extent="1-16" drill="0.35"/> +<via x="66" y="22.5" extent="1-16" drill="0.35"/> +<via x="66" y="21.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="33.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="32.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="32.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="27.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="27.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="26" extent="1-16" drill="0.35"/> +<via x="58.5" y="26" extent="1-16" drill="0.35"/> +<via x="60.5" y="21" extent="1-16" drill="0.35"/> +<via x="58.5" y="21" extent="1-16" drill="0.35"/> +<via x="57.5" y="32" extent="1-16" drill="0.35"/> +<via x="57.5" y="31" extent="1-16" drill="0.35"/> +<via x="57.5" y="30" extent="1-16" drill="0.35"/> +<via x="57.5" y="29" extent="1-16" drill="0.35"/> +<via x="57.5" y="28" extent="1-16" drill="0.35"/> +<via x="57.5" y="25.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="24.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="23.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="22.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="21.5" extent="1-16" drill="0.35"/> </signal> <signal name="DRV-LO-V"> <contactref element="R29" pad="1"/> <contactref element="U2" pad="P$40"/> -<wire x1="73.49999375" y1="45.5" x2="74.989475" y2="45.5" width="0.2032" layer="1"/> -<wire x1="74.989475" y1="45.5" x2="75.007075" y2="45.4824" width="0.2032" layer="1"/> -<wire x1="75.9684125" y1="45.4824" x2="76.31979375" y2="45.13101875" width="0.2032" layer="1"/> -<wire x1="76.31979375" y1="45.13101875" x2="77.18020625" y2="45.13101875" width="0.2032" layer="1"/> -<wire x1="75.007075" y1="45.4824" x2="75.9684125" y2="45.4824" width="0.2032" layer="1"/> -<wire x1="79.1491875" y1="47.1" x2="80.25" y2="47.1" width="0.2032" layer="1"/> -<wire x1="77.18020625" y1="45.13101875" x2="79.1491875" y2="47.1" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="36.5" x2="42.989475" y2="36.5" width="0.2032" layer="1"/> +<wire x1="42.989475" y1="36.5" x2="43.007075" y2="36.4824" width="0.2032" layer="1"/> +<wire x1="43.9684125" y1="36.4824" x2="44.31979375" y2="36.13101875" width="0.2032" layer="1"/> +<wire x1="43.007075" y1="36.4824" x2="43.9684125" y2="36.4824" width="0.2032" layer="1"/> +<wire x1="47.59234375" y1="36.13101875" x2="48.6444" y2="35.0789625" width="0.2032" layer="1"/> +<wire x1="48.6444" y1="35.0789625" x2="48.6444" y2="28.4794875" width="0.2032" layer="1"/> +<wire x1="48.6444" y1="28.4794875" x2="49.046" y2="28.0778875" width="0.2032" layer="1"/> +<wire x1="50.15" y1="22.5907875" x2="50.15" y2="22.2" width="0.2032" layer="1"/> +<wire x1="44.31979375" y1="36.13101875" x2="47.59234375" y2="36.13101875" width="0.2032" layer="1"/> +<wire x1="49.046" y1="23.45963125" x2="49.4016" y2="23.10403125" width="0.2032" layer="1"/> +<wire x1="49.4016" y1="23.10403125" x2="49.4016" y2="22.8" width="0.2032" layer="1"/> +<wire x1="49.046" y1="28.0778875" x2="49.046" y2="23.45963125" width="0.2032" layer="1"/> +<wire x1="50.15" y1="22.2" x2="50.0016" y2="22.2" width="0.2032" layer="1"/> +<wire x1="50.0016" y1="22.2" x2="49.4016" y2="22.8" width="0.2032" layer="1"/> </signal> <signal name="DRV-HI-V"> <contactref element="R28" pad="1"/> <contactref element="U2" pad="P$42"/> -<via x="76.75" y="46.16961875" extent="1-16" drill="0.35"/> -<wire x1="73.49999375" y1="46.5" x2="75.13895" y2="46.5" width="0.2032" layer="1"/> -<wire x1="76.62441875" y1="46.2952" x2="76.75" y2="46.16961875" width="0.2032" layer="1"/> -<wire x1="75.13895" y1="46.5" x2="75.34375" y2="46.2952" width="0.2032" layer="1"/> -<wire x1="75.34375" y1="46.2952" x2="76.62441875" y2="46.2952" width="0.2032" layer="1"/> -<wire x1="76.75" y1="46.16961875" x2="78.11665625" y2="44.8029625" width="0.2032" layer="16"/> -<wire x1="78.11665625" y1="44.8029625" x2="78.8970375" y2="44.8029625" width="0.2032" layer="16"/> -<via x="78.8970375" y="44.8029625" extent="1-16" drill="0.35"/> -<wire x1="78.8970375" y1="44.8029625" x2="78.8970375" y2="43.0529625" width="0.2032" layer="1"/> -<wire x1="78.8970375" y1="43.0529625" x2="80.25" y2="41.7" width="0.2032" layer="1"/> +<via x="46.65" y="37.16961875" extent="1-16" drill="0.35"/> +<wire x1="41.49999375" y1="37.5" x2="43.13895" y2="37.5" width="0.2032" layer="1"/> +<wire x1="46.52441875" y1="37.2952" x2="46.65" y2="37.16961875" width="0.2032" layer="1"/> +<wire x1="43.13895" y1="37.5" x2="43.34375" y2="37.2952" width="0.2032" layer="1"/> +<wire x1="43.34375" y1="37.2952" x2="46.52441875" y2="37.2952" width="0.2032" layer="1"/> +<wire x1="46.95" y1="37.16961875" x2="50.15" y2="33.96961875" width="0.2032" layer="16"/> +<via x="50.15" y="32" extent="1-16" drill="0.3"/> +<wire x1="46.65" y1="37.16961875" x2="46.95" y2="37.16961875" width="0.2032" layer="16"/> +<wire x1="50.15" y1="33.96961875" x2="50.15" y2="32" width="0.2032" layer="16"/> </signal> <signal name="DRV-HI-W"> <contactref element="R33" pad="1"/> <contactref element="U2" pad="P$37"/> -<wire x1="73.49999375" y1="44.000003125" x2="75.299996875" y2="44.000003125" width="0.2032" layer="1"/> -<wire x1="75.299996875" y1="44.000003125" x2="75.4952" y2="43.8048" width="0.2032" layer="1"/> -<wire x1="76.50625" y1="43.8048" x2="76.6848" y2="43.62625" width="0.2032" layer="1"/> -<wire x1="76.6848" y1="43.62625" x2="76.6848" y2="43.1" width="0.2032" layer="1"/> -<wire x1="75.4952" y1="43.8048" x2="76.50625" y2="43.8048" width="0.2032" layer="1"/> -<via x="78.5106" y="42.54533125" extent="1-16" drill="0.35"/> -<wire x1="76.6848" y1="43.1" x2="76.7152" y2="43.0696" width="0.2032" layer="1"/> -<wire x1="76.7152" y1="43.0696" x2="76.7152" y2="42.57375" width="0.2032" layer="1"/> -<wire x1="76.7152" y1="42.57375" x2="76.89375" y2="42.3952" width="0.2032" layer="1"/> -<wire x1="76.89375" y1="42.3952" x2="78.10625" y2="42.3952" width="0.2032" layer="1"/> -<wire x1="78.10625" y1="42.3952" x2="78.25638125" y2="42.54533125" width="0.2032" layer="1"/> -<wire x1="78.25638125" y1="42.54533125" x2="78.5106" y2="42.54533125" width="0.2032" layer="1"/> -<wire x1="78.5106" y1="42.54533125" x2="78.5106" y2="41.67133125" width="0.2032" layer="16"/> -<wire x1="78.5106" y1="41.67133125" x2="78.1202" y2="41.28093125" width="0.2032" layer="16"/> -<via x="78.1202" y="41.28093125" extent="1-16" drill="0.35"/> -<wire x1="78.1202" y1="41.28093125" x2="78.30113125" y2="41.1" width="0.2032" layer="1"/> -<wire x1="78.30113125" y1="41.1" x2="78.6204625" y2="41.1" width="0.2032" layer="1"/> -<wire x1="79.8" y1="39.9204625" x2="79.8" y2="38.8" width="0.2032" layer="1"/> -<wire x1="79.8" y1="38.8" x2="79.6048" y2="38.6048" width="0.2032" layer="1"/> -<wire x1="78.6204625" y1="41.1" x2="79.8" y2="39.9204625" width="0.2032" layer="1"/> -<wire x1="79.6048" y1="38.6048" x2="79.52375" y2="38.6048" width="0.2032" layer="1"/> -<wire x1="79.52375" y1="38.6048" x2="79.3452" y2="38.42625" width="0.2032" layer="1"/> -<wire x1="79.3452" y1="38.42625" x2="79.3452" y2="32.9548" width="0.2032" layer="1"/> -<wire x1="79.3452" y1="32.9548" x2="80.25" y2="32.05" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="35.000003125" x2="43.299996875" y2="35.000003125" width="0.2032" layer="1"/> +<wire x1="43.299996875" y1="35.000003125" x2="43.4952" y2="34.8048" width="0.2032" layer="1"/> +<wire x1="44.50625" y1="34.8048" x2="44.6848" y2="34.62625" width="0.2032" layer="1"/> +<wire x1="44.6848" y1="34.62625" x2="44.6848" y2="34.1" width="0.2032" layer="1"/> +<wire x1="43.4952" y1="34.8048" x2="44.50625" y2="34.8048" width="0.2032" layer="1"/> +<wire x1="44.6848" y1="34.1" x2="44.7152" y2="34.0696" width="0.2032" layer="1"/> +<wire x1="44.7152" y1="34.0696" x2="44.7152" y2="33.57375" width="0.2032" layer="1"/> +<wire x1="44.7152" y1="33.57375" x2="44.88895" y2="33.4" width="0.2032" layer="1"/> +<wire x1="47.1" y1="33.4" x2="47.9332" y2="32.5668" width="0.2032" layer="1"/> +<wire x1="47.9332" y1="32.5668" x2="47.9332" y2="28.1848875" width="0.2032" layer="1"/> +<wire x1="47.9332" y1="28.1848875" x2="48.3348" y2="27.7832875" width="0.2032" layer="1"/> +<wire x1="47.9332" y1="24.53046875" x2="47.9332" y2="24.06953125" width="0.2032" layer="1"/> +<wire x1="48.3348" y1="24.93206875" x2="47.9332" y2="24.53046875" width="0.2032" layer="1"/> +<wire x1="47.9332" y1="24.06953125" x2="49.046" y2="22.95673125" width="0.2032" layer="1"/> +<wire x1="48.3348" y1="27.7832875" x2="48.3348" y2="24.93206875" width="0.2032" layer="1"/> +<wire x1="44.88895" y1="33.4" x2="47.1" y2="33.4" width="0.2032" layer="1"/> +<wire x1="50.15" y1="20.5" x2="50.15" y2="20.8907875" width="0.2032" layer="1"/> +<wire x1="49.546" y1="21.4947875" x2="50.15" y2="20.8907875" width="0.2032" layer="1"/> +<wire x1="49.046" y1="22.95673125" x2="49.046" y2="22.5527" width="0.2032" layer="1"/> +<wire x1="49.546" y1="22.0527" x2="49.546" y2="21.4947875" width="0.2032" layer="1"/> +<wire x1="49.046" y1="22.5527" x2="49.546" y2="22.0527" width="0.2032" layer="1"/> </signal> <signal name="PHASE-W"> <contactref element="R36" pad="2"/> <contactref element="U2" pad="P$36"/> <contactref element="C33" pad="2"/> -<contactref element="U$11" pad="SH"/> -<contactref element="U$11" pad="VSW"/> <contactref element="J11" pad="P$1"/> -<wire x1="73.49999375" y1="43.50000625" x2="73.5" y2="43.5" width="0.2032" layer="1"/> -<wire x1="75.2252625" y1="43.5" x2="75.3268625" y2="43.3984" width="0.2032" layer="1"/> -<wire x1="75.3268625" y1="43.3984" x2="75.6016" y2="43.3984" width="0.2032" layer="1"/> -<wire x1="75.6016" y1="43.3984" x2="75.9" y2="43.1" width="0.2032" layer="1"/> -<wire x1="73.5" y1="43.5" x2="75.2252625" y2="43.5" width="0.2032" layer="1"/> -<wire x1="92.37625" y1="35.6798" x2="92.5548" y2="35.50125" width="0.2032" layer="1"/> -<wire x1="92.0445875" y1="33.8138" x2="90.9554125" y2="33.8138" width="0.2032" layer="1"/> -<wire x1="90.9554125" y1="33.8138" x2="90.5756125" y2="34.1936" width="0.2032" layer="1"/> -<wire x1="91.75" y1="35.75" x2="91.8202" y2="35.6798" width="0.2032" layer="1"/> -<wire x1="91.8202" y1="35.6798" x2="92.37625" y2="35.6798" width="0.2032" layer="1"/> -<wire x1="92.5548" y1="35.50125" x2="92.5548" y2="34.3240125" width="0.2032" layer="1"/> -<wire x1="92.5548" y1="34.3240125" x2="92.0445875" y2="33.8138" width="0.2032" layer="1"/> -<wire x1="90.5756125" y1="34.1936" x2="87.9243875" y2="34.1936" width="0.2032" layer="1"/> -<wire x1="87.9243875" y1="34.1936" x2="87.5445875" y2="33.8138" width="0.2032" layer="1"/> -<via x="75.9" y="43.1" extent="1-16" drill="0.35"/> -<wire x1="78.2" y1="38.6" x2="78.2" y2="39.5" width="0.2032" layer="1"/> -<wire x1="78.2" y1="39.5" x2="77.45766875" y2="40.24233125" width="0.2032" layer="1"/> -<wire x1="77.45766875" y1="40.24233125" x2="77.32240625" y2="40.24233125" width="0.2032" layer="1"/> -<wire x1="76.2081375" y1="41.3566" x2="75.88880625" y2="41.3566" width="0.2032" layer="1"/> -<via x="75.88880625" y="41.3566" extent="1-16" drill="0.35"/> -<wire x1="75.88880625" y1="41.3566" x2="75.88880625" y2="43.08880625" width="0.2032" layer="16"/> -<wire x1="75.88880625" y1="43.08880625" x2="75.9" y2="43.1" width="0.2032" layer="16"/> -<wire x1="77.32240625" y1="40.24233125" x2="76.2081375" y2="41.3566" width="0.2032" layer="1"/> -<wire x1="87.5445875" y1="33.8138" x2="82.7412" y2="33.8138" width="0.2032" layer="1"/> -<wire x1="82.7412" y1="33.8138" x2="82.558" y2="33.6306" width="0.2032" layer="1"/> -<via x="82.558" y="33.6306" extent="1-16" drill="0.35"/> -<wire x1="82.558" y1="33.6306" x2="81.8" y2="34.3886" width="0.2032" layer="16"/> -<wire x1="82.3322" y1="36.12413125" x2="82.3322" y2="36.64786875" width="0.2032" layer="16"/> -<wire x1="82.3322" y1="36.64786875" x2="81.96186875" y2="37.0182" width="0.2032" layer="16"/> -<wire x1="81.8" y1="34.3886" x2="81.8" y2="35.59193125" width="0.2032" layer="16"/> -<wire x1="81.8" y1="35.59193125" x2="82.3322" y2="36.12413125" width="0.2032" layer="16"/> -<wire x1="79.7818" y1="37.0182" x2="78.2" y2="38.6" width="0.2032" layer="16"/> -<via x="78.2" y="38.6" extent="1-16" drill="0.35"/> -<wire x1="81.96186875" y1="37.0182" x2="79.7818" y2="37.0182" width="0.2032" layer="16"/> -<polygon width="0.2032" layer="1" thermals="no" rank="3"> -<vertex x="91.3" y="40.3"/> -<vertex x="100.5" y="40.3"/> -<vertex x="100.5" y="30.3"/> -<vertex x="95.5" y="30.3"/> -<vertex x="93" y="32.8"/> -<vertex x="93" y="35.8"/> -<vertex x="92.6" y="36.2"/> -<vertex x="91.3" y="36.2"/> +<contactref element="Q5" pad="P$5"/> +<contactref element="Q6" pad="P$3"/> +<contactref element="Q6" pad="P$2"/> +<contactref element="Q6" pad="P$1"/> +<wire x1="43.9" y1="34.1" x2="43.550803125" y2="34.449196875" width="0.2032" layer="1"/> +<wire x1="43.550803125" y1="34.449196875" x2="43.347903125" y2="34.449196875" width="0.2032" layer="1"/> +<wire x1="43.347903125" y1="34.449196875" x2="43.29709375" y2="34.50000625" width="0.2032" layer="1"/> +<wire x1="43.29709375" y1="34.50000625" x2="41.49999375" y2="34.50000625" width="0.2032" layer="1"/> +<wire x1="43.9" y1="34.1" x2="44.3596" y2="33.6404" width="0.2032" layer="1"/> +<wire x1="44.3596" y1="33.6404" x2="44.3596" y2="33.42645" width="0.2032" layer="1"/> +<wire x1="44.3596" y1="33.42645" x2="44.74165" y2="33.0444" width="0.2032" layer="1"/> +<wire x1="44.74165" y1="33.0444" x2="46.9527" y2="33.0444" width="0.2032" layer="1"/> +<wire x1="46.9527" y1="33.0444" x2="47.5776" y2="32.4195" width="0.2032" layer="1"/> +<wire x1="47.5776" y1="28.0375875" x2="47.9792" y2="27.6359875" width="0.2032" layer="1"/> +<wire x1="47.5776" y1="32.4195" x2="47.5776" y2="28.0375875" width="0.2032" layer="1"/> +<wire x1="47.9792" y1="27.6359875" x2="47.9792" y2="25.07936875" width="0.2032" layer="1"/> +<wire x1="47.9792" y1="25.07936875" x2="47.5776" y2="24.67776875" width="0.2032" layer="1"/> +<wire x1="47.5776" y1="24.67776875" x2="47.5776" y2="23.92223125" width="0.2032" layer="1"/> +<wire x1="47.5776" y1="23.92223125" x2="48.6904" y2="22.80943125" width="0.2032" layer="1"/> +<contactref element="Q12" pad="P$5"/> +<contactref element="Q11" pad="P$1"/> +<contactref element="Q11" pad="P$2"/> +<contactref element="Q11" pad="P$3"/> +<polygon width="0.0762" layer="1" thermals="no" rank="4"> +<vertex x="62.5" y="19.2"/> +<vertex x="62.5" y="13.3"/> +<vertex x="75" y="13.3"/> +<vertex x="75" y="17.5"/> +<vertex x="83.5" y="17.5"/> +<vertex x="83.5" y="5.5"/> +<vertex x="56.5" y="5.5"/> +<vertex x="56.5" y="19.2"/> </polygon> -<polygon width="0.2032" layer="16" thermals="no" rank="3"> -<vertex x="100.5" y="40.3"/> -<vertex x="91.3" y="40.3"/> -<vertex x="91.3" y="34.5"/> -<vertex x="95.5" y="30.3"/> -<vertex x="100.5" y="30.3"/> +<polygon width="0.0762" layer="16" rank="3"> +<vertex x="62.5" y="19.2"/> +<vertex x="53.5" y="19.2"/> +<vertex x="53.5" y="5.5"/> +<vertex x="62.5" y="5.5"/> +<vertex x="67" y="5.5"/> +<vertex x="67" y="13"/> +<vertex x="62.5" y="13"/> </polygon> -<via x="91.6" y="39.9" extent="1-16" drill="0.35"/> -<wire x1="78.2" y1="38.6" x2="77.8" y2="38.6" width="0.2032" layer="16"/> -<wire x1="77.8" y1="38.6" x2="77.5323375" y2="38.3323375" width="0.2032" layer="16"/> -<wire x1="77.5323375" y1="30.908125" x2="74.5050125" y2="27.8808" width="0.2032" layer="16"/> -<wire x1="74.5050125" y1="27.8808" x2="69.68180625" y2="27.8808" width="0.2032" layer="16"/> -<wire x1="69.23020625" y1="27.4292" x2="68.2960625" y2="27.4292" width="0.2032" layer="16"/> -<wire x1="68.2960625" y1="27.4292" x2="67.6638625" y2="28.0614" width="0.2032" layer="16"/> -<wire x1="69.68180625" y1="27.8808" x2="69.23020625" y2="27.4292" width="0.2032" layer="16"/> -<wire x1="77.5323375" y1="38.3323375" x2="77.5323375" y2="30.908125" width="0.2032" layer="16"/> -<wire x1="67.6638625" y1="28.0614" x2="66.66979375" y2="28.0614" width="0.2032" layer="16"/> -<via x="92.3" y="39.9" extent="1-16" drill="0.35"/> -<via x="91.6" y="39.1" extent="1-16" drill="0.35"/> -<via x="92.3" y="39.1" extent="1-16" drill="0.35"/> -<via x="91.6" y="38.3" extent="1-16" drill="0.35"/> -<via x="92.3" y="38.3" extent="1-16" drill="0.35"/> -<via x="91.6" y="37.5" extent="1-16" drill="0.35"/> -<via x="92.3" y="37.5" extent="1-16" drill="0.35"/> -<via x="91.6" y="36.7" extent="1-16" drill="0.35"/> -<via x="92.3" y="36.7" extent="1-16" drill="0.35"/> -<via x="93.5" y="39.9" extent="1-16" drill="0.35"/> -<via x="93.6" y="38" extent="1-16" drill="0.35"/> -<via x="93.6" y="36" extent="1-16" drill="0.35"/> -<via x="95" y="39.9" extent="1-16" drill="0.35"/> -<via x="95" y="38.3" extent="1-16" drill="0.35"/> -<via x="95.1" y="37.1" extent="1-16" drill="0.35"/> -<via x="96.5" y="39.9" extent="1-16" drill="0.35"/> -<via x="96.5" y="38.3" extent="1-16" drill="0.35"/> -<via x="98" y="38.3" extent="1-16" drill="0.35"/> -<via x="98" y="39.9" extent="1-16" drill="0.35"/> -<via x="98.5" y="37.1" extent="1-16" drill="0.35"/> -<via x="99.6" y="30.8" extent="1-16" drill="0.35"/> -<wire x1="66.66979375" y1="28.0614" x2="64.10839375" y2="25.5" width="0.1524" layer="16"/> -<wire x1="64.10839375" y1="25.5" x2="63.95" y2="25.5" width="0.1524" layer="16"/> -<via x="63.95" y="25.5" extent="1-16" drill="0.3"/> -<wire x1="91.6" y1="36.7" x2="91.75" y2="35.75" width="0" layer="19" extent="1-1"/> +<wire x1="48.6904" y1="22.80943125" x2="48.6904" y2="22.4054" width="0.2032" layer="1"/> +<wire x1="48.6904" y1="22.4054" x2="49.1904" y2="21.9054" width="0.2032" layer="1"/> +<wire x1="49.1904" y1="21.3474875" x2="49.546" y2="20.9918875" width="0.2032" layer="1"/> +<wire x1="49.1904" y1="21.9054" x2="49.1904" y2="21.3474875" width="0.2032" layer="1"/> +<wire x1="49.546" y1="19.7947875" x2="49.8010875" y2="19.5397" width="0.2032" layer="1"/> +<wire x1="49.8010875" y1="19.5397" x2="51.1" y2="19.5397" width="0.2032" layer="1"/> +<wire x1="51.1" y1="19.5397" x2="56.5" y2="19.5397" width="0.2032" layer="1"/> +<wire x1="49.546" y1="20.9918875" x2="49.546" y2="19.7947875" width="0.2032" layer="1"/> +<wire x1="56.5" y1="19.5397" x2="57" y2="19.0397" width="0.2032" layer="1"/> +<wire x1="57" y1="19.0397" x2="57" y2="18.7" width="0.2032" layer="1"/> +<wire x1="51.1" y1="20.1" x2="50.6572" y2="20.5428" width="0.2032" layer="16"/> +<via x="51.1" y="20.1" extent="1-16" drill="0.3"/> +<wire x1="51.1" y1="20.1" x2="51.1" y2="19.5397" width="0.2032" layer="1"/> +<wire x1="50.6572" y1="20.5428" x2="47.8428" y2="20.5428" width="0.2032" layer="16"/> +<wire x1="47.8428" y1="20.5428" x2="46.5" y2="19.2" width="0.2032" layer="16"/> +<via x="46.5" y="19.2" extent="1-16" drill="0.3"/> +<wire x1="46.5" y1="19.2" x2="45.8" y2="18.5" width="0.2032" layer="1"/> +<wire x1="45.8" y1="18.5" x2="33.1" y2="18.5" width="0.2032" layer="1"/> +<wire x1="33.1" y1="18.5" x2="32.6" y2="18" width="0.2032" layer="1"/> +<wire x1="32.6" y1="18" x2="32.6" y2="17.1" width="0.2032" layer="1"/> +<wire x1="32.6" y1="17.1" x2="32" y2="16.5" width="0.2032" layer="1"/> +<wire x1="32" y1="16.5" x2="31.95" y2="16.5" width="0.2032" layer="1"/> +<via x="61.5" y="18" extent="1-16" drill="0.35"/> +<via x="61.5" y="17" extent="1-16" drill="0.35"/> +<via x="61.5" y="16" extent="1-16" drill="0.35"/> +<via x="61.5" y="15" extent="1-16" drill="0.35"/> +<via x="61.5" y="14" extent="1-16" drill="0.35"/> +<via x="60.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="18" extent="1-16" drill="0.35"/> +<via x="59.5" y="17" extent="1-16" drill="0.35"/> +<via x="59.5" y="16" extent="1-16" drill="0.35"/> +<via x="59.5" y="15" extent="1-16" drill="0.35"/> +<via x="59.5" y="14" extent="1-16" drill="0.35"/> +<via x="58.5" y="14.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="15.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="16.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="17.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="11.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="10.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="9.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="8.5" extent="1-16" drill="0.35"/> +<via x="61.5" y="7.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="8" extent="1-16" drill="0.35"/> +<via x="60.5" y="9" extent="1-16" drill="0.35"/> +<via x="60.5" y="10" extent="1-16" drill="0.35"/> +<via x="60.5" y="11" extent="1-16" drill="0.35"/> +<via x="59.5" y="11.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="10.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="9.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="8.5" extent="1-16" drill="0.35"/> +<via x="59.5" y="7.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="8" extent="1-16" drill="0.35"/> +<via x="58.5" y="9" extent="1-16" drill="0.35"/> +<via x="58.5" y="10" extent="1-16" drill="0.35"/> +<via x="58.5" y="11" extent="1-16" drill="0.35"/> +<via x="66" y="11.5" extent="1-16" drill="0.35"/> +<via x="66" y="10.5" extent="1-16" drill="0.35"/> +<via x="66" y="9.5" extent="1-16" drill="0.35"/> +<via x="66" y="8.5" extent="1-16" drill="0.35"/> +<via x="66" y="7.5" extent="1-16" drill="0.35"/> +<via x="65" y="6.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="18.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="13.5" extent="1-16" drill="0.35"/> +<via x="58.5" y="13.5" extent="1-16" drill="0.35"/> +<via x="60.5" y="12" extent="1-16" drill="0.35"/> +<via x="58.5" y="12" extent="1-16" drill="0.35"/> +<via x="60.5" y="7" extent="1-16" drill="0.35"/> +<via x="58.5" y="7" extent="1-16" drill="0.35"/> +<via x="57.5" y="18" extent="1-16" drill="0.35"/> +<via x="57.5" y="17" extent="1-16" drill="0.35"/> +<via x="57.5" y="16" extent="1-16" drill="0.35"/> +<via x="57.5" y="15" extent="1-16" drill="0.35"/> +<via x="57.5" y="14" extent="1-16" drill="0.35"/> +<via x="57.5" y="11.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="10.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="9.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="8.5" extent="1-16" drill="0.35"/> +<via x="57.5" y="7.5" extent="1-16" drill="0.35"/> </signal> <signal name="DRV-LO-W"> <contactref element="R34" pad="1"/> <contactref element="U2" pad="P$35"/> -<wire x1="73.49999375" y1="43.00000625" x2="73.5" y2="43" width="0.2032" layer="1"/> -<wire x1="73.5" y1="43" x2="75.1152" y2="43" width="0.2032" layer="1"/> -<wire x1="75.1152" y1="43" x2="75.1152" y2="42.57375" width="0.2032" layer="1"/> -<wire x1="80.25" y1="40.0452" x2="80.25" y2="37.95" width="0.2032" layer="1"/> -<wire x1="75.1152" y1="42.57375" x2="75.29375" y2="42.3952" width="0.2032" layer="1"/> -<wire x1="75.29375" y1="42.3952" x2="76.3190125" y2="42.3952" width="0.2032" layer="1"/> -<wire x1="76.3190125" y1="42.3952" x2="76.7254125" y2="41.9888" width="0.2032" layer="1"/> -<wire x1="78.1730625" y1="41.9888" x2="78.24873125" y2="41.91313125" width="0.2032" layer="1"/> -<wire x1="78.24873125" y1="41.91313125" x2="78.38206875" y2="41.91313125" width="0.2032" layer="1"/> -<wire x1="76.7254125" y1="41.9888" x2="78.1730625" y2="41.9888" width="0.2032" layer="1"/> -<wire x1="78.38206875" y1="41.91313125" x2="80.25" y2="40.0452" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="34.00000625" x2="41.5" y2="34" width="0.2032" layer="1"/> +<wire x1="42.7607875" y1="34" x2="43.3147875" y2="33.446" width="0.2032" layer="1"/> +<wire x1="43.3147875" y1="33.446" x2="43.83715" y2="33.446" width="0.2032" layer="1"/> +<wire x1="41.5" y1="34" x2="42.7607875" y2="34" width="0.2032" layer="1"/> +<wire x1="43.83715" y1="33.446" x2="44.59435" y2="32.6888" width="0.2032" layer="1"/> +<wire x1="44.59435" y1="32.6888" x2="46.8054" y2="32.6888" width="0.2032" layer="1"/> +<wire x1="46.8054" y1="32.6888" x2="47.222" y2="32.2722" width="0.2032" layer="1"/> +<wire x1="47.222" y1="27.8902875" x2="47.6236" y2="27.4886875" width="0.2032" layer="1"/> +<wire x1="47.222" y1="32.2722" x2="47.222" y2="27.8902875" width="0.2032" layer="1"/> +<wire x1="47.6236" y1="25.22666875" x2="47.222" y2="24.82506875" width="0.2032" layer="1"/> +<wire x1="47.222" y1="24.82506875" x2="47.222" y2="23.77493125" width="0.2032" layer="1"/> +<wire x1="47.222" y1="23.77493125" x2="48.3348" y2="22.66213125" width="0.2032" layer="1"/> +<wire x1="47.6236" y1="27.4886875" x2="47.6236" y2="25.22666875" width="0.2032" layer="1"/> +<wire x1="48.3348" y1="22.66213125" x2="48.3348" y2="22.2581" width="0.2032" layer="1"/> +<wire x1="48.3348" y1="22.2581" x2="48.8348" y2="21.7581" width="0.2032" layer="1"/> +<wire x1="48.8348" y1="21.2001875" x2="49.1" y2="20.9349875" width="0.2032" layer="1"/> +<wire x1="48.8348" y1="21.7581" x2="48.8348" y2="21.2001875" width="0.2032" layer="1"/> +<wire x1="49.1" y1="14" x2="49.15" y2="13.95" width="0.2032" layer="1"/> +<wire x1="49.1" y1="20.9349875" x2="49.1" y2="14" width="0.2032" layer="1"/> </signal> <signal name="SL-W"> <contactref element="U2" pad="P$34"/> -<contactref element="R5" pad="B"/> -<contactref element="U$11" pad="PGND"/> -<wire x1="73.49999375" y1="42.50000625" x2="73.55549375" y2="42.44450625" width="0.2032" layer="1"/> -<wire x1="75.1254125" y1="41.9888" x2="76.150675" y2="41.9888" width="0.2032" layer="1"/> -<wire x1="73.55549375" y1="42.44450625" x2="74.66970625" y2="42.44450625" width="0.2032" layer="1"/> -<wire x1="74.66970625" y1="42.44450625" x2="75.1254125" y2="41.9888" width="0.2032" layer="1"/> -<via x="79.1678" y="39.65859375" extent="1-16" drill="0.35"/> -<wire x1="78.1776625" y1="40.64873125" x2="79.1678" y2="39.65859375" width="0.2032" layer="1"/> -<wire x1="77.49074375" y1="40.64873125" x2="78.1776625" y2="40.64873125" width="0.2032" layer="1"/> -<wire x1="76.150675" y1="41.9888" x2="77.49074375" y2="40.64873125" width="0.2032" layer="1"/> -<via x="80.8822" y="39.3" extent="1-16" drill="0.35"/> -<wire x1="82.2564" y1="38.2258" x2="82.6742" y2="38.2258" width="0.2032" layer="1"/> -<wire x1="83" y1="38.2258" x2="82.6742" y2="38.2258" width="0.2032" layer="1"/> -<wire x1="82.6742" y1="38.2258" x2="82.45" y2="38.45" width="0.2032" layer="1"/> -<polygon width="0.2032" layer="1" thermals="no"> -<vertex x="87.3" y="40.5"/> -<vertex x="86.2" y="40.5"/> -<vertex x="84.4" y="38.7"/> -<vertex x="79.5" y="38.7"/> -<vertex x="79.5" y="35.3"/> -<vertex x="81" y="33.8"/> -<vertex x="86.4" y="33.8"/> -<vertex x="87.3" y="34.7"/> -</polygon> -<polygon width="0.2032" layer="16" thermals="no" rank="3"> -<vertex x="87.3" y="40.5"/> -<vertex x="85.9" y="40.5"/> -<vertex x="85.9" y="36"/> -<vertex x="87.3" y="36"/> -</polygon> -<via x="87" y="40" extent="1-16" drill="0.35"/> -<via x="86.3" y="40" extent="1-16" drill="0.35"/> -<wire x1="82.45" y1="38.45" x2="82.3" y2="38.6" width="0.2032" layer="1"/> -<wire x1="80.8822" y1="39.3" x2="79.52639375" y2="39.3" width="0.2032" layer="16"/> -<wire x1="79.52639375" y1="39.3" x2="79.1678" y2="39.65859375" width="0.2032" layer="16"/> -<wire x1="80.8822" y1="39.3" x2="80.8822" y2="38.9178" width="0.2032" layer="1"/> -<wire x1="81.35" y1="38.45" x2="82.45" y2="38.45" width="0.2032" layer="1"/> -<wire x1="80.8822" y1="38.9178" x2="81.35" y2="38.45" width="0.2032" layer="1"/> -<via x="87" y="39.2" extent="1-16" drill="0.35"/> -<via x="86.3" y="39.2" extent="1-16" drill="0.35"/> -<via x="87" y="38.4" extent="1-16" drill="0.35"/> -<via x="86.3" y="38.4" extent="1-16" drill="0.35"/> -<via x="87" y="37.6" extent="1-16" drill="0.35"/> -<via x="86.3" y="37.6" extent="1-16" drill="0.35"/> -<via x="87" y="36.8" extent="1-16" drill="0.35"/> -<via x="86.3" y="36.8" extent="1-16" drill="0.35"/> -</signal> -<signal name="SHNT-W-HI"> -<contactref element="R20" pad="1"/> -<contactref element="R5" pad="SB"/> -<via x="81.7" y="36.386" extent="1-16" drill="0.35"/> -<wire x1="77.9387375" y1="30.7397875" x2="74.67335" y2="27.4744" width="0.2032" layer="16"/> -<wire x1="70.7258" y1="27.4744" x2="70.5" y2="27.2486" width="0.2032" layer="16"/> -<via x="70.5" y="27.2486" extent="1-16" drill="0.35"/> -<wire x1="70.5" y1="27.2486" x2="70.5" y2="33.35" width="0.2032" layer="1"/> -<wire x1="74.67335" y1="27.4744" x2="70.7258" y2="27.4744" width="0.2032" layer="16"/> -<wire x1="81.7" y1="36.386" x2="79.086" y2="36.386" width="0.2032" layer="16"/> -<wire x1="79.086" y1="36.386" x2="77.9387375" y2="35.2387375" width="0.2032" layer="16"/> -<wire x1="77.9387375" y1="35.2387375" x2="77.9387375" y2="30.7397875" width="0.2032" layer="16"/> -</signal> -<signal name="SHNT-W-LO"> -<contactref element="R21" pad="1"/> -<contactref element="R5" pad="SA"/> -<via x="81.7" y="33.586" extent="1-16" drill="0.35"/> -<wire x1="81.7" y1="33.586" x2="81.7" y2="33.9138625" width="0.2032" layer="16"/> -<wire x1="81.7" y1="33.9138625" x2="81.3936" y2="34.2202625" width="0.2032" layer="16"/> -<wire x1="81.3936" y1="34.2202625" x2="81.3936" y2="34.686" width="0.2032" layer="16"/> -<wire x1="81.3936" y1="34.686" x2="80.1" y2="35.9796" width="0.2032" layer="16"/> -<wire x1="78.3451375" y1="30.57145" x2="74.8416875" y2="27.068" width="0.2032" layer="16"/> -<wire x1="74.8416875" y1="27.068" x2="72.4" y2="27.068" width="0.2032" layer="16"/> -<wire x1="72.4" y1="27.068" x2="72.2" y2="26.868" width="0.2032" layer="16"/> -<wire x1="72.2" y1="26.868" x2="72.2" y2="26.8422" width="0.2032" layer="16"/> -<via x="72.2" y="26.8422" extent="1-16" drill="0.35"/> -<wire x1="72.2" y1="26.8422" x2="72.2" y2="33.35" width="0.2032" layer="1"/> -<wire x1="80.1" y1="35.9796" x2="79.2543375" y2="35.9796" width="0.2032" layer="16"/> -<wire x1="79.2543375" y1="35.9796" x2="78.3451375" y2="35.0704" width="0.2032" layer="16"/> -<wire x1="78.3451375" y1="35.0704" x2="78.3451375" y2="30.57145" width="0.2032" layer="16"/> +<wire x1="41.49999375" y1="33.50000625" x2="41.55549375" y2="33.44450625" width="0.2032" layer="1"/> +<contactref element="J21" pad="1"/> +<wire x1="41.49999375" y1="33.50000625" x2="41.5" y2="33.5" width="0.2032" layer="1"/> +<wire x1="41.5" y1="33.5" x2="42.7578875" y2="33.5" width="0.2032" layer="1"/> +<wire x1="43.1674875" y1="33.0904" x2="43.68985" y2="33.0904" width="0.2032" layer="1"/> +<wire x1="42.7578875" y1="33.5" x2="43.1674875" y2="33.0904" width="0.2032" layer="1"/> +<wire x1="43.68985" y1="33.0904" x2="44.44705" y2="32.3332" width="0.2032" layer="1"/> +<wire x1="44.44705" y1="32.3332" x2="46.6581" y2="32.3332" width="0.2032" layer="1"/> +<wire x1="46.6581" y1="32.3332" x2="46.8664" y2="32.1249" width="0.2032" layer="1"/> +<wire x1="46.8664" y1="27.7429875" x2="47.268" y2="27.3413875" width="0.2032" layer="1"/> +<wire x1="46.8664" y1="32.1249" x2="46.8664" y2="27.7429875" width="0.2032" layer="1"/> +<wire x1="47.268" y1="25.37396875" x2="46.8664" y2="24.97236875" width="0.2032" layer="1"/> +<wire x1="47.268" y1="27.3413875" x2="47.268" y2="25.37396875" width="0.2032" layer="1"/> +<wire x1="46.8664" y1="23.62763125" x2="47.9792" y2="22.51483125" width="0.2032" layer="1"/> +<wire x1="46.8664" y1="24.97236875" x2="46.8664" y2="23.62763125" width="0.2032" layer="1"/> +<wire x1="47.9792" y1="22.51483125" x2="47.9792" y2="22.1108" width="0.2032" layer="1"/> +<wire x1="48.4792" y1="21.6108" x2="48.4792" y2="21.0528875" width="0.2032" layer="1"/> +<wire x1="48.4792" y1="21.0528875" x2="48.7444" y2="20.7876875" width="0.2032" layer="1"/> +<wire x1="47.9792" y1="22.1108" x2="48.4792" y2="21.6108" width="0.2032" layer="1"/> +<wire x1="48.546" y1="14.6552125" x2="48.546" y2="13.2447875" width="0.2032" layer="1"/> +<wire x1="48.546" y1="13.2447875" x2="48.6947875" y2="13.096" width="0.2032" layer="1"/> +<wire x1="48.6947875" y1="13.096" x2="48.9643" y2="13.096" width="0.2032" layer="1"/> +<wire x1="48.9643" y1="13.096" x2="49.1603" y2="12.9" width="0.2032" layer="1"/> +<wire x1="48.7444" y1="14.8536125" x2="48.546" y2="14.6552125" width="0.2032" layer="1"/> +<wire x1="48.7444" y1="20.7876875" x2="48.7444" y2="14.8536125" width="0.2032" layer="1"/> +<wire x1="49.1603" y1="12.9" x2="49.3" y2="12.9" width="0" layer="19" extent="1-1"/> </signal> <signal name="N$7"> <contactref element="U2" pad="P$38"/> <contactref element="C33" pad="1"/> -<wire x1="73.49999375" y1="44.500003125" x2="75.374746875" y2="44.500003125" width="0.2032" layer="1"/> -<wire x1="75.374746875" y1="44.500003125" x2="75.66355" y2="44.2112" width="0.2032" layer="1"/> -<wire x1="76.6745875" y1="44.2112" x2="77.0912" y2="43.7945875" width="0.2032" layer="1"/> -<wire x1="77.0912" y1="43.7945875" x2="77.0912" y2="43.5088" width="0.2032" layer="1"/> -<wire x1="77.0912" y1="43.5088" x2="77.5" y2="43.1" width="0.2032" layer="1"/> -<wire x1="75.66355" y1="44.2112" x2="76.6745875" y2="44.2112" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="35.500003125" x2="43.374746875" y2="35.500003125" width="0.2032" layer="1"/> +<wire x1="43.374746875" y1="35.500003125" x2="43.66355" y2="35.2112" width="0.2032" layer="1"/> +<wire x1="44.6745875" y1="35.2112" x2="45.0912" y2="34.7945875" width="0.2032" layer="1"/> +<wire x1="45.0912" y1="34.7945875" x2="45.0912" y2="34.5088" width="0.2032" layer="1"/> +<wire x1="45.0912" y1="34.5088" x2="45.5" y2="34.1" width="0.2032" layer="1"/> +<wire x1="43.66355" y1="35.2112" x2="44.6745875" y2="35.2112" width="0.2032" layer="1"/> </signal> <signal name="N$8"> <contactref element="U2" pad="P$43"/> <contactref element="C32" pad="1"/> -<wire x1="73.49999375" y1="46.999996875" x2="75.949996875" y2="46.999996875" width="0.2032" layer="1"/> -<wire x1="75.949996875" y1="46.999996875" x2="75.95" y2="47" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="37.999996875" x2="43.949996875" y2="37.999996875" width="0.2032" layer="1"/> +<wire x1="43.949996875" y1="37.999996875" x2="43.95" y2="38" width="0.2032" layer="1"/> </signal> <signal name="N$9"> <contactref element="U2" pad="P$48"/> <contactref element="C31" pad="1"/> -<wire x1="73.49999375" y1="49.49999375" x2="75.44999375" y2="49.49999375" width="0.2032" layer="1"/> -<wire x1="75.44999375" y1="49.49999375" x2="75.95" y2="50" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="40.49999375" x2="43.44999375" y2="40.49999375" width="0.2032" layer="1"/> +<wire x1="43.44999375" y1="40.49999375" x2="43.95" y2="41" width="0.2032" layer="1"/> </signal> <signal name="N$13"> <contactref element="U2" pad="P$33"/> <contactref element="C28" pad="1"/> <contactref element="R18" pad="2"/> -<wire x1="67.05" y1="36.5" x2="68.0452" y2="37.4952" width="0.2032" layer="1"/> -<wire x1="68.0452" y1="37.4952" x2="69.2894125" y2="37.4952" width="0.2032" layer="1"/> -<wire x1="70.422871875" y1="37.8112" x2="70.51421875" y2="37.894296875" width="0.2032" layer="1"/> -<wire x1="69.6054125" y1="37.8112" x2="70.422871875" y2="37.8112" width="0.2032" layer="1"/> -<wire x1="69.2894125" y1="37.4952" x2="69.6054125" y2="37.8112" width="0.2032" layer="1"/> -<wire x1="70.51421875" y1="37.894296875" x2="71.2808" y2="38.660878125" width="0.2032" layer="1"/> -<wire x1="71.2808" y1="39.14954375" x2="71.20129375" y2="39.22905" width="0.2032" layer="1"/> -<wire x1="71.2808" y1="38.660878125" x2="71.2808" y2="39.14954375" width="0.2032" layer="1"/> -<wire x1="73.49999375" y1="41.9987" x2="73.49999375" y2="42.000009375" width="0.2032" layer="1"/> -<wire x1="73.4458" y1="41.94450625" x2="73.49999375" y2="41.9987" width="0.2032" layer="1"/> -<wire x1="71.20129375" y1="40.82550625" x2="72.32029375" y2="41.94450625" width="0.2032" layer="1"/> -<wire x1="72.32029375" y1="41.94450625" x2="73.4458" y2="41.94450625" width="0.2032" layer="1"/> -<wire x1="71.20129375" y1="39.22905" x2="71.20129375" y2="40.82550625" width="0.2032" layer="1"/> -<wire x1="67.1" y1="35.25" x2="67.1" y2="36.45" width="0.2032" layer="1"/> -<wire x1="67.1" y1="36.45" x2="67.05" y2="36.5" width="0.2032" layer="1"/> +<wire x1="35.05" y1="27.5" x2="36.0452" y2="28.4952" width="0.2032" layer="1"/> +<wire x1="36.0452" y1="28.4952" x2="37.2894125" y2="28.4952" width="0.2032" layer="1"/> +<wire x1="38.422871875" y1="28.8112" x2="38.51421875" y2="28.894296875" width="0.2032" layer="1"/> +<wire x1="37.6054125" y1="28.8112" x2="38.422871875" y2="28.8112" width="0.2032" layer="1"/> +<wire x1="37.2894125" y1="28.4952" x2="37.6054125" y2="28.8112" width="0.2032" layer="1"/> +<wire x1="38.51421875" y1="28.894296875" x2="39.2808" y2="29.660878125" width="0.2032" layer="1"/> +<wire x1="39.2808" y1="30.14954375" x2="39.20129375" y2="30.22905" width="0.2032" layer="1"/> +<wire x1="39.2808" y1="29.660878125" x2="39.2808" y2="30.14954375" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="32.9987" x2="41.49999375" y2="33.000009375" width="0.2032" layer="1"/> +<wire x1="41.4458" y1="32.94450625" x2="41.49999375" y2="32.9987" width="0.2032" layer="1"/> +<wire x1="39.20129375" y1="31.82550625" x2="40.32029375" y2="32.94450625" width="0.2032" layer="1"/> +<wire x1="40.32029375" y1="32.94450625" x2="41.4458" y2="32.94450625" width="0.2032" layer="1"/> +<wire x1="39.20129375" y1="30.22905" x2="39.20129375" y2="31.82550625" width="0.2032" layer="1"/> +<wire x1="35.1" y1="26.25" x2="35.1" y2="27.45" width="0.2032" layer="1"/> +<wire x1="35.1" y1="27.45" x2="35.05" y2="27.5" width="0.2032" layer="1"/> </signal> <signal name="N$14"> <contactref element="U2" pad="P$32"/> <contactref element="C28" pad="2"/> <contactref element="R19" pad="2"/> -<wire x1="73.49999375" y1="41.500009375" x2="73.444490625" y2="41.44450625" width="0.2032" layer="1"/> -<wire x1="71.60769375" y1="39.3973875" x2="71.6872" y2="39.31788125" width="0.2032" layer="1"/> -<wire x1="71.60769375" y1="40.65716875" x2="71.60769375" y2="39.3973875" width="0.2032" layer="1"/> -<wire x1="73.444490625" y1="41.44450625" x2="72.39503125" y2="41.44450625" width="0.2032" layer="1"/> -<wire x1="72.39503125" y1="41.44450625" x2="71.60769375" y2="40.65716875" width="0.2032" layer="1"/> -<wire x1="71.6872" y1="39.31788125" x2="71.6872" y2="38.4119375" width="0.2032" layer="1"/> -<wire x1="70.5800625" y1="37.4048" x2="69.77375" y2="37.4048" width="0.2032" layer="1"/> -<wire x1="68.96895" y1="36.6" x2="68.95" y2="36.5" width="0.2032" layer="1"/> -<wire x1="71.6872" y1="38.4119375" x2="70.5800625" y2="37.4048" width="0.2032" layer="1"/> -<wire x1="69.77375" y1="37.4048" x2="68.96895" y2="36.6" width="0.2032" layer="1"/> -<wire x1="68.95" y1="36.5" x2="68.95" y2="35.4" width="0.2032" layer="1"/> -<wire x1="68.95" y1="35.4" x2="68.8" y2="35.25" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="32.500009375" x2="41.444490625" y2="32.44450625" width="0.2032" layer="1"/> +<wire x1="39.60769375" y1="30.3973875" x2="39.6872" y2="30.31788125" width="0.2032" layer="1"/> +<wire x1="39.60769375" y1="31.65716875" x2="39.60769375" y2="30.3973875" width="0.2032" layer="1"/> +<wire x1="41.444490625" y1="32.44450625" x2="40.39503125" y2="32.44450625" width="0.2032" layer="1"/> +<wire x1="40.39503125" y1="32.44450625" x2="39.60769375" y2="31.65716875" width="0.2032" layer="1"/> +<wire x1="39.6872" y1="30.31788125" x2="39.6872" y2="29.4119375" width="0.2032" layer="1"/> +<wire x1="38.5800625" y1="28.4048" x2="37.77375" y2="28.4048" width="0.2032" layer="1"/> +<wire x1="36.96895" y1="27.6" x2="36.95" y2="27.5" width="0.2032" layer="1"/> +<wire x1="39.6872" y1="29.4119375" x2="38.5800625" y2="28.4048" width="0.2032" layer="1"/> +<wire x1="37.77375" y1="28.4048" x2="36.96895" y2="27.6" width="0.2032" layer="1"/> +<wire x1="36.95" y1="27.5" x2="36.95" y2="26.4" width="0.2032" layer="1"/> +<wire x1="36.95" y1="26.4" x2="36.8" y2="26.25" width="0.2032" layer="1"/> </signal> <signal name="N$15"> <contactref element="U2" pad="P$31"/> <contactref element="C29" pad="1"/> <contactref element="R20" pad="2"/> -<wire x1="73.49999375" y1="41.000009375" x2="73.444496875" y2="40.9445125" width="0.2032" layer="1"/> -<wire x1="72.01409375" y1="39.565725" x2="72.0936" y2="39.48621875" width="0.2032" layer="1"/> -<wire x1="72.01409375" y1="40.48883125" x2="72.01409375" y2="39.565725" width="0.2032" layer="1"/> -<wire x1="73.444496875" y1="40.9445125" x2="72.469775" y2="40.9445125" width="0.2032" layer="1"/> -<wire x1="72.469775" y1="40.9445125" x2="72.01409375" y2="40.48883125" width="0.2032" layer="1"/> -<wire x1="72.0936" y1="38.2436" x2="70.35" y2="36.5" width="0.2032" layer="1"/> -<wire x1="72.0936" y1="39.48621875" x2="72.0936" y2="38.2436" width="0.2032" layer="1"/> -<wire x1="70.35" y1="36.5" x2="70.35" y2="35.4" width="0.2032" layer="1"/> -<wire x1="70.35" y1="35.4" x2="70.5" y2="35.25" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="32.000009375" x2="41.444496875" y2="31.9445125" width="0.2032" layer="1"/> +<wire x1="40.01409375" y1="30.565725" x2="40.0936" y2="30.48621875" width="0.2032" layer="1"/> +<wire x1="40.01409375" y1="31.48883125" x2="40.01409375" y2="30.565725" width="0.2032" layer="1"/> +<wire x1="41.444496875" y1="31.9445125" x2="40.469775" y2="31.9445125" width="0.2032" layer="1"/> +<wire x1="40.469775" y1="31.9445125" x2="40.01409375" y2="31.48883125" width="0.2032" layer="1"/> +<wire x1="40.0936" y1="29.2436" x2="38.35" y2="27.5" width="0.2032" layer="1"/> +<wire x1="40.0936" y1="30.48621875" x2="40.0936" y2="29.2436" width="0.2032" layer="1"/> +<wire x1="38.35" y1="27.5" x2="38.35" y2="26.4" width="0.2032" layer="1"/> +<wire x1="38.35" y1="26.4" x2="38.5" y2="26.25" width="0.2032" layer="1"/> </signal> <signal name="N$16"> <contactref element="U2" pad="P$30"/> <contactref element="C29" pad="2"/> <contactref element="R21" pad="2"/> -<wire x1="72.25" y1="36.5" x2="72.5" y2="36.85" width="0.2032" layer="1"/> -<wire x1="72.5" y1="39.65455625" x2="72.42049375" y2="39.7340625" width="0.2032" layer="1"/> -<wire x1="72.42049375" y1="39.7340625" x2="72.42049375" y2="40.32049375" width="0.2032" layer="1"/> -<wire x1="72.5" y1="36.85" x2="72.5" y2="39.65455625" width="0.2032" layer="1"/> -<wire x1="72.6000125" y1="40.5000125" x2="73.49999375" y2="40.5000125" width="0.2032" layer="1"/> -<wire x1="72.42049375" y1="40.32049375" x2="72.6000125" y2="40.5000125" width="0.2032" layer="1"/> -<wire x1="72.25" y1="36.5" x2="72.25" y2="35.3" width="0.2032" layer="1"/> -<wire x1="72.25" y1="35.3" x2="72.2" y2="35.25" width="0.2032" layer="1"/> +<wire x1="40.25" y1="27.5" x2="40.5" y2="27.85" width="0.2032" layer="1"/> +<wire x1="40.5" y1="30.65455625" x2="40.42049375" y2="30.7340625" width="0.2032" layer="1"/> +<wire x1="40.42049375" y1="30.7340625" x2="40.42049375" y2="31.32049375" width="0.2032" layer="1"/> +<wire x1="40.5" y1="27.85" x2="40.5" y2="30.65455625" width="0.2032" layer="1"/> +<wire x1="40.6000125" y1="31.5000125" x2="41.49999375" y2="31.5000125" width="0.2032" layer="1"/> +<wire x1="40.42049375" y1="31.32049375" x2="40.6000125" y2="31.5000125" width="0.2032" layer="1"/> +<wire x1="40.25" y1="27.5" x2="40.25" y2="26.4" width="0.2032" layer="1"/> +<wire x1="40.25" y1="26.4" x2="40.1" y2="26.25" width="0.2032" layer="1"/> </signal> <signal name="CP1"> <contactref element="C19" pad="1"/> <contactref element="U2" pad="P$14"/> -<wire x1="66.000009375" y1="46.999996875" x2="64.731053125" y2="46.999996875" width="0.2032" layer="1"/> -<wire x1="64.731053125" y1="46.999996875" x2="64.32625" y2="47.4048" width="0.2032" layer="1"/> -<wire x1="64.32625" y1="47.4048" x2="62.7048" y2="47.4048" width="0.2032" layer="1"/> -<wire x1="62.7048" y1="47.4048" x2="61.85" y2="46.5" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="37.999996875" x2="32.731053125" y2="37.999996875" width="0.2032" layer="1"/> +<wire x1="32.731053125" y1="37.999996875" x2="32.32625" y2="38.4048" width="0.2032" layer="1"/> +<wire x1="32.32625" y1="38.4048" x2="30.7048" y2="38.4048" width="0.2032" layer="1"/> +<wire x1="30.7048" y1="38.4048" x2="29.85" y2="37.5" width="0.2032" layer="1"/> </signal> <signal name="CP2"> <contactref element="C19" pad="2"/> <contactref element="U2" pad="P$15"/> -<wire x1="66.000009375" y1="46.5" x2="63.75" y2="46.5" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="37.5" x2="31.75" y2="37.5" width="0.2032" layer="1"/> </signal> <signal name="N$18"> <contactref element="U2" pad="P$13"/> -<contactref element="C16" pad="2"/> <contactref element="C13" pad="2"/> -<wire x1="66.000009375" y1="47.499996875" x2="64.805790625" y2="47.499996875" width="0.2032" layer="1"/> -<wire x1="64.805790625" y1="47.499996875" x2="64.4945875" y2="47.8112" width="0.2032" layer="1"/> -<wire x1="63.7888" y1="47.8112" x2="62.8" y2="48.7" width="0.2032" layer="1"/> -<wire x1="64.4945875" y1="47.8112" x2="63.7888" y2="47.8112" width="0.2032" layer="1"/> -<wire x1="62.8" y1="48.7" x2="62.8" y2="50.45" width="0" layer="19" extent="1-1"/> +<contactref element="C16" pad="2"/> +<wire x1="34.000009375" y1="38.499996875" x2="32.733953125" y2="38.499996875" width="0.2032" layer="1"/> +<wire x1="32.733953125" y1="38.499996875" x2="32.47355" y2="38.7604" width="0.2032" layer="1"/> +<wire x1="31.6396" y1="38.7604" x2="31.3" y2="39.1" width="0.2032" layer="1"/> +<wire x1="32.47355" y1="38.7604" x2="31.6396" y2="38.7604" width="0.2032" layer="1"/> +<wire x1="31.3" y1="39.1" x2="30.8" y2="39.6" width="0.2032" layer="1"/> +<wire x1="30.8" y1="39.6" x2="30.8" y2="40.8" width="0.2032" layer="1"/> </signal> <signal name="N$20"> -<contactref element="C17" pad="2"/> <contactref element="C14" pad="2"/> <contactref element="U2" pad="P$23"/> <contactref element="U2" pad="P$11"/> -<wire x1="66.000009375" y1="48.49999375" x2="66.84545625" y2="48.49999375" width="0.2032" layer="1"/> -<wire x1="67.07950625" y1="48.26594375" x2="66.84545625" y2="48.49999375" width="0.2032" layer="1"/> -<wire x1="66.000009375" y1="42.50000625" x2="66.84545625" y2="42.50000625" width="0.2032" layer="1"/> -<wire x1="66.84545625" y1="42.50000625" x2="67.07950625" y2="42.73405625" width="0.2032" layer="1"/> -<wire x1="67.07950625" y1="42.73405625" x2="67.07950625" y2="48.26594375" width="0.2032" layer="1"/> -<wire x1="62.9" y1="40" x2="62.9" y2="41.5" width="0.2032" layer="1"/> -<wire x1="62.9" y1="41.5" x2="62.9" y2="41.75" width="0.2032" layer="1"/> -<wire x1="66.000009375" y1="42.50000625" x2="63.90000625" y2="42.50000625" width="0.2032" layer="1"/> -<wire x1="63.90000625" y1="42.50000625" x2="62.9" y2="41.5" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="39.49999375" x2="34.84545625" y2="39.49999375" width="0.2032" layer="1"/> +<wire x1="35.07950625" y1="39.26594375" x2="34.84545625" y2="39.49999375" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="33.50000625" x2="34.84545625" y2="33.50000625" width="0.2032" layer="1"/> +<wire x1="34.84545625" y1="33.50000625" x2="35.07950625" y2="33.73405625" width="0.2032" layer="1"/> +<wire x1="35.07950625" y1="33.73405625" x2="35.07950625" y2="39.26594375" width="0.2032" layer="1"/> +<wire x1="30.9" y1="32.5" x2="30.9" y2="32.75" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="33.50000625" x2="31.90000625" y2="33.50000625" width="0.2032" layer="1"/> +<wire x1="31.90000625" y1="33.50000625" x2="30.9" y2="32.5" width="0.2032" layer="1"/> </signal> <signal name="N$11"> <contactref element="U2" pad="P$27"/> <contactref element="C20" pad="2"/> -<wire x1="66.000009375" y1="40.5000125" x2="65.999996875" y2="40.5" width="0.2032" layer="1"/> -<wire x1="65.999996875" y1="40.5" x2="65" y2="40.5" width="0.2032" layer="1"/> -<wire x1="65" y1="40.5" x2="64.85" y2="40.35" width="0.2032" layer="1"/> -<wire x1="64.85" y1="40.35" x2="64.85" y2="38.7" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="31.5000125" x2="33.999996875" y2="31.5" width="0.2032" layer="1"/> +<wire x1="33.999996875" y1="31.5" x2="33" y2="31.5" width="0.2032" layer="1"/> +<wire x1="33" y1="31.5" x2="32.85" y2="31.35" width="0.2032" layer="1"/> +<wire x1="32.85" y1="31.35" x2="32.85" y2="29.7" width="0.2032" layer="1"/> </signal> <signal name="N$21"> <contactref element="R11" pad="1"/> <contactref element="U2" pad="P$7"/> -<wire x1="66.000009375" y1="50.499990625" x2="66.00001875" y2="50.5" width="0.2032" layer="1"/> -<wire x1="67" y1="50.5" x2="67" y2="50.6545375" width="0.2032" layer="1"/> -<wire x1="67" y1="50.6545375" x2="67.07950625" y2="50.73404375" width="0.2032" layer="1"/> -<wire x1="67.07950625" y1="53.76593125" x2="66.90095625" y2="53.94448125" width="0.2032" layer="1"/> -<wire x1="67.07950625" y1="50.73404375" x2="67.07950625" y2="53.76593125" width="0.2032" layer="1"/> -<wire x1="62.10551875" y1="53.94448125" x2="61.85" y2="54.1" width="0.2032" layer="1"/> -<wire x1="66.00001875" y1="50.5" x2="67" y2="50.5" width="0.2032" layer="1"/> -<wire x1="66.90095625" y1="53.94448125" x2="62.10551875" y2="53.94448125" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="41.499990625" x2="34.00001875" y2="41.5" width="0.2032" layer="1"/> +<wire x1="30.10551875" y1="44.94448125" x2="29.857928125" y2="45.095175" width="0.2032" layer="1"/> +<wire x1="29.857928125" y1="45.095175" x2="29.85" y2="45.1" width="0.2032" layer="1"/> +<wire x1="34.000009375" y1="41.499990625" x2="34" y2="41.5" width="0.1524" layer="1"/> +<wire x1="32.57955" y1="41.85095" x2="32.20339375" y2="41.85095" width="0.1524" layer="1"/> +<wire x1="32.9305" y1="41.5" x2="32.57955" y2="41.85095" width="0.1524" layer="1"/> +<wire x1="34" y1="41.5" x2="32.9305" y2="41.5" width="0.1524" layer="1"/> +<wire x1="30.72625625" y1="42.2334" x2="31.82094375" y2="42.2334" width="0.1524" layer="1"/> +<wire x1="32.20339375" y1="41.85095" x2="31.82094375" y2="42.2334" width="0.1524" layer="1"/> +<wire x1="29.857928125" y1="44.615359375" x2="29.857928125" y2="45.095175" width="0.1524" layer="1"/> +<wire x1="29.857928125" y1="44.615359375" x2="30.4286" y2="44.0446875" width="0.1524" layer="1"/> +<wire x1="30.4286" y1="42.53105625" x2="30.72625625" y2="42.2334" width="0.1524" layer="1"/> +<wire x1="30.4286" y1="44.0446875" x2="30.4286" y2="42.53105625" width="0.1524" layer="1"/> </signal> <signal name="M-PWM"> <contactref element="U2" pad="P$8"/> -<wire x1="66.000009375" y1="49.999990625" x2="64.679559375" y2="49.999990625" width="0.1524" layer="1"/> -<wire x1="64.679559375" y1="49.999990625" x2="64.3596" y2="50.31995" width="0.1524" layer="1"/> -<via x="64.3596" y="50.31995" extent="1-16" drill="0.3"/> -<wire x1="64.3596" y1="50.31995" x2="63.78435" y2="50.8952" width="0.1524" layer="16"/> -<wire x1="63.78435" y1="50.8952" x2="62.4890625" y2="50.8952" width="0.1524" layer="16"/> -<wire x1="62.4890625" y1="50.8952" x2="61.5656" y2="49.9717375" width="0.1524" layer="16"/> -<wire x1="61.5656" y1="49.9717375" x2="61.5656" y2="49.61718125" width="0.1524" layer="16"/> -<wire x1="61.5656" y1="49.61718125" x2="60.88281875" y2="48.9344" width="0.1524" layer="16"/> -<wire x1="59.11718125" y1="48.9344" x2="58.3904" y2="49.66118125" width="0.1524" layer="16"/> -<wire x1="60.88281875" y1="48.9344" x2="59.11718125" y2="48.9344" width="0.1524" layer="16"/> -<wire x1="58.3904" y1="53.18895" x2="58.07935" y2="53.5" width="0.1524" layer="16"/> -<wire x1="58.3904" y1="49.66118125" x2="58.3904" y2="53.18895" width="0.1524" layer="16"/> -<wire x1="58.07935" y1="53.5" x2="55.5" y2="53.5" width="0.1524" layer="16"/> -<wire x1="54.4" y1="52.4" x2="54.4" y2="50.9" width="0.1524" layer="16"/> -<wire x1="52.78005" y1="49.531" x2="52.469" y2="49.21995" width="0.1524" layer="16"/> -<wire x1="52.469" y1="49.21995" x2="52.469" y2="48.78005" width="0.1524" layer="16"/> -<wire x1="52.469" y1="48.78005" x2="52.724525" y2="48.524525" width="0.1524" layer="16"/> -<wire x1="54.4" y1="50.9" x2="53.031" y2="49.531" width="0.1524" layer="16"/> -<wire x1="53.031" y1="49.531" x2="52.78005" y2="49.531" width="0.1524" layer="16"/> -<wire x1="52.724525" y1="48.524525" x2="52.724525" y2="48.473075" width="0.1524" layer="16"/> -<wire x1="52.724525" y1="48.473075" x2="52.9548" y2="48.2428" width="0.1524" layer="16"/> -<via x="52.9548" y="48.2428" extent="1-16" drill="0.3"/> -<wire x1="52.7286" y1="47.6253125" x2="52.5946875" y2="47.4914" width="0.1524" layer="1"/> -<wire x1="52.5946875" y1="47.4914" x2="51.6053125" y2="47.4914" width="0.1524" layer="1"/> -<wire x1="51.6053125" y1="47.4914" x2="51.4714" y2="47.6253125" width="0.1524" layer="1"/> -<wire x1="52.7286" y1="48.0166" x2="52.7286" y2="47.6253125" width="0.1524" layer="1"/> -<wire x1="51.4714" y1="48.1286" x2="51.4714" y2="47.6253125" width="0.1524" layer="1"/> -<wire x1="52.9548" y1="48.2428" x2="52.7286" y2="48.0166" width="0.1524" layer="1"/> -<wire x1="55.5" y1="53.5" x2="54.4" y2="52.4" width="0.1524" layer="16"/> +<wire x1="34.000009375" y1="40.999990625" x2="32.679559375" y2="40.999990625" width="0.1524" layer="1"/> +<wire x1="32.679559375" y1="40.999990625" x2="32.3596" y2="41.31995" width="0.1524" layer="1"/> +<via x="32.3596" y="41.31995" extent="1-16" drill="0.3"/> +<wire x1="32.3596" y1="41.31995" x2="31.78435" y2="41.8952" width="0.1524" layer="16"/> +<wire x1="26.07935" y1="44.5" x2="23.5" y2="44.5" width="0.1524" layer="16"/> +<wire x1="22.4" y1="43.4" x2="22.4" y2="41.9" width="0.1524" layer="16"/> +<wire x1="20.78005" y1="40.531" x2="20.469" y2="40.21995" width="0.1524" layer="16"/> +<wire x1="20.469" y1="40.21995" x2="20.469" y2="39.78005" width="0.1524" layer="16"/> +<wire x1="20.469" y1="39.78005" x2="20.724525" y2="39.524525" width="0.1524" layer="16"/> +<wire x1="22.4" y1="41.9" x2="21.031" y2="40.531" width="0.1524" layer="16"/> +<wire x1="21.031" y1="40.531" x2="20.78005" y2="40.531" width="0.1524" layer="16"/> +<wire x1="20.724525" y1="39.524525" x2="20.724525" y2="39.473075" width="0.1524" layer="16"/> +<wire x1="20.724525" y1="39.473075" x2="20.9548" y2="39.2428" width="0.1524" layer="16"/> +<via x="20.9548" y="39.2428" extent="1-16" drill="0.3"/> +<wire x1="20.7286" y1="38.6253125" x2="20.5946875" y2="38.4914" width="0.1524" layer="1"/> +<wire x1="20.5946875" y1="38.4914" x2="19.6053125" y2="38.4914" width="0.1524" layer="1"/> +<wire x1="19.6053125" y1="38.4914" x2="19.4714" y2="38.6253125" width="0.1524" layer="1"/> +<wire x1="20.7286" y1="39.0166" x2="20.7286" y2="38.6253125" width="0.1524" layer="1"/> +<wire x1="19.4714" y1="39.1286" x2="19.4714" y2="38.6253125" width="0.1524" layer="1"/> +<wire x1="20.9548" y1="39.2428" x2="20.7286" y2="39.0166" width="0.1524" layer="1"/> +<wire x1="23.5" y1="44.5" x2="22.4" y2="43.4" width="0.1524" layer="16"/> <contactref element="U1" pad="12"/> -<wire x1="50.4" y1="48.35" x2="51.25" y2="48.35" width="0.1524" layer="1"/> -<wire x1="51.25" y1="48.35" x2="51.4714" y2="48.1286" width="0.1524" layer="1"/> +<wire x1="18.4" y1="39.35" x2="19.25" y2="39.35" width="0.1524" layer="1"/> +<wire x1="19.25" y1="39.35" x2="19.4714" y2="39.1286" width="0.1524" layer="1"/> +<wire x1="30.23655" y1="41.8952" x2="29.63175" y2="42.5" width="0.1524" layer="16"/> +<wire x1="29.63175" y1="42.5" x2="28.3378875" y2="42.5" width="0.1524" layer="16"/> +<wire x1="26.3378875" y1="44.5" x2="26.07935" y2="44.5" width="0.1524" layer="16"/> +<wire x1="31.78435" y1="41.8952" x2="30.23655" y2="41.8952" width="0.1524" layer="16"/> +<wire x1="28.3378875" y1="42.5" x2="26.3378875" y2="44.5" width="0.1524" layer="16"/> </signal> <signal name="DRV_OCTW"> <contactref element="U2" pad="P$5"/> -<wire x1="66.000009375" y1="51.4999875" x2="65.999996875" y2="51.5" width="0.2032" layer="1"/> -<wire x1="66.000009375" y1="51.4999875" x2="64.6877125" y2="51.4999875" width="0.1524" layer="1"/> -<wire x1="64.6877125" y1="51.4999875" x2="64.57955" y2="51.60815" width="0.1524" layer="1"/> -<wire x1="64.57955" y1="51.60815" x2="64.09619375" y2="51.60815" width="0.1524" layer="1"/> -<via x="62.84135" y="52.1096" extent="1-16" drill="0.3"/> -<wire x1="63.06755" y1="51.8834" x2="62.84135" y2="52.1096" width="0.1524" layer="1"/> -<wire x1="63.82094375" y1="51.8834" x2="63.06755" y2="51.8834" width="0.1524" layer="1"/> -<wire x1="64.09619375" y1="51.60815" x2="63.82094375" y2="51.8834" width="0.1524" layer="1"/> -<wire x1="62.84135" y1="52.1096" x2="60.956" y2="50.22425" width="0.1524" layer="16"/> -<wire x1="60.956" y1="50.22425" x2="60.956" y2="49.86969375" width="0.1524" layer="16"/> -<wire x1="60.956" y1="49.86969375" x2="60.63030625" y2="49.544" width="0.1524" layer="16"/> -<wire x1="59.36969375" y1="49.544" x2="59" y2="49.91369375" width="0.1524" layer="16"/> -<wire x1="60.63030625" y1="49.544" x2="59.36969375" y2="49.544" width="0.1524" layer="16"/> -<wire x1="59" y1="53.7" x2="56.6" y2="56.1" width="0.1524" layer="16"/> -<wire x1="59" y1="49.91369375" x2="59" y2="53.7" width="0.1524" layer="16"/> -<wire x1="55.6" y1="56.1" x2="56.6" y2="56.1" width="0.1524" layer="16"/> -<via x="44.9" y="52.1" extent="1-16" drill="0.3"/> +<wire x1="34.000009375" y1="42.4999875" x2="33.999996875" y2="42.5" width="0.2032" layer="1"/> +<wire x1="24.6" y1="47.1" x2="23.6" y2="47.1" width="0.1524" layer="16"/> +<via x="12.9" y="43.1" extent="1-16" drill="0.3"/> <contactref element="U1" pad="26"/> -<wire x1="45.15" y1="51.1" x2="45.15" y2="51.85" width="0.1524" layer="1"/> -<wire x1="45.15" y1="51.85" x2="44.9" y2="52.1" width="0.1524" layer="1"/> -<wire x1="44.9" y1="52.1" x2="46.6" y2="53.8" width="0.1524" layer="16"/> -<wire x1="53.3" y1="53.8" x2="55.6" y2="56.1" width="0.1524" layer="16"/> -<wire x1="46.6" y1="53.8" x2="53.3" y2="53.8" width="0.1524" layer="16"/> -</signal> -<signal name="N$34"> -<contactref element="L1" pad="1"/> -<contactref element="C12" pad="1"/> -<contactref element="U1" pad="62"/> -<wire x1="49.1" y1="39.8" x2="49.1" y2="41.1" width="0.1524" layer="1"/> -<wire x1="48.65" y1="41.55" x2="48.65" y2="42.1" width="0.1524" layer="1"/> -<wire x1="49.1" y1="41.1" x2="48.65" y2="41.55" width="0.1524" layer="1"/> -<wire x1="49.1" y1="39.8" x2="49.05" y2="39.75" width="0.1524" layer="1"/> -<wire x1="49.05" y1="39.75" x2="49.05" y2="38.3" width="0.1524" layer="1"/> +<wire x1="13.15" y1="42.1" x2="13.15" y2="42.85" width="0.1524" layer="1"/> +<wire x1="13.15" y1="42.85" x2="12.9" y2="43.1" width="0.1524" layer="1"/> +<wire x1="22.2" y1="45.7" x2="23.6" y2="47.1" width="0.1524" layer="16"/> +<wire x1="22.2" y1="45.7" x2="18.2" y2="45.7" width="0.1524" layer="16"/> +<wire x1="28.5904" y1="43.1096" x2="24.6" y2="47.1" width="0.1524" layer="16"/> +<wire x1="34.000009375" y1="42.4999875" x2="32.41646875" y2="42.4999875" width="0.1524" layer="1"/> +<wire x1="32.07345625" y1="42.843" x2="31.531" y2="42.843" width="0.1524" layer="1"/> +<wire x1="32.41646875" y1="42.4999875" x2="32.07345625" y2="42.843" width="0.1524" layer="1"/> +<wire x1="31" y1="43.374" x2="31" y2="43.5216" width="0.1524" layer="1"/> +<via x="31" y="43.5216" extent="1-16" drill="0.3"/> +<wire x1="31.531" y1="42.843" x2="31.531" y2="42.98435" width="0.1524" layer="1"/> +<wire x1="31.531" y1="42.98435" x2="31.21995" y2="43.2954" width="0.1524" layer="1"/> +<wire x1="31.21995" y1="43.2954" x2="31.0786" y2="43.2954" width="0.1524" layer="1"/> +<wire x1="31.0786" y1="43.2954" x2="31" y2="43.374" width="0.1524" layer="1"/> +<wire x1="31" y1="43.5216" x2="30.588" y2="43.1096" width="0.1524" layer="16"/> +<wire x1="30.588" y1="43.1096" x2="28.5904" y2="43.1096" width="0.1524" layer="16"/> +<wire x1="18.2" y1="45.7" x2="15.8262" y2="43.3262" width="0.1524" layer="16"/> +<wire x1="13.1262" y1="43.3262" x2="12.9" y2="43.1" width="0.1524" layer="16"/> +<wire x1="15.8262" y1="43.3262" x2="13.1262" y2="43.3262" width="0.1524" layer="16"/> </signal> <signal name="V-W"> <contactref element="R37" pad="2"/> @@ -3030,614 +3539,991 @@ design rules under a new name.</description> <contactref element="C43" pad="1"/> <contactref element="J3" pad="7"/> <contactref element="D3" pad="1"/> -<wire x1="62.05" y1="27.5" x2="62.05" y2="25.5" width="0.1524" layer="1"/> -<wire x1="62.05" y1="25.5" x2="60.35" y2="25.5" width="0.1524" layer="1"/> -<wire x1="60.35" y1="25.5" x2="58.7" y2="27.15" width="0.1524" layer="1"/> -<wire x1="58.7" y1="27.15" x2="58.7" y2="27.5" width="0.1524" layer="1"/> -<wire x1="58.7" y1="27.5" x2="57.96" y2="27.5" width="0.2032" layer="1"/> -<wire x1="57.96" y1="27.5" x2="56.1" y2="29.36" width="0.2032" layer="1"/> +<wire x1="30.05" y1="18.5" x2="30.05" y2="16.5" width="0.1524" layer="1"/> +<wire x1="30.05" y1="16.5" x2="28.35" y2="16.5" width="0.1524" layer="1"/> +<wire x1="28.35" y1="16.5" x2="26.7" y2="18.15" width="0.1524" layer="1"/> +<wire x1="26.7" y1="18.15" x2="26.7" y2="18.5" width="0.1524" layer="1"/> +<wire x1="26.7" y1="18.5" x2="25.96" y2="18.5" width="0.2032" layer="1"/> +<wire x1="25.96" y1="18.5" x2="24.1" y2="20.36" width="0.2032" layer="1"/> <contactref element="U1" pad="64"/> -<wire x1="49.65" y1="42.1" x2="51.795775" y2="42.1" width="0.1524" layer="1"/> -<wire x1="51.795775" y1="42.1" x2="53.8856" y2="40.010175" width="0.1524" layer="1"/> -<wire x1="53.8856" y1="37.88334375" x2="54.1904" y2="37.57854375" width="0.1524" layer="1"/> -<wire x1="53.8856" y1="40.010175" x2="53.8856" y2="37.88334375" width="0.1524" layer="1"/> -<wire x1="54.1904" y1="37.57854375" x2="54.1904" y2="35.4874875" width="0.1524" layer="1"/> -<wire x1="54.1904" y1="35.4874875" x2="54.4952" y2="35.1826875" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="33.07374375" x2="54.8" y2="32.76894375" width="0.1524" layer="1"/> -<wire x1="54.4952" y1="35.1826875" x2="54.4952" y2="33.07374375" width="0.1524" layer="1"/> -<wire x1="54.8" y1="30.66" x2="56.1" y2="29.36" width="0.1524" layer="1"/> -<wire x1="54.8" y1="32.76894375" x2="54.8" y2="30.66" width="0.1524" layer="1"/> +<wire x1="17.65" y1="33.1" x2="19.795775" y2="33.1" width="0.1524" layer="1"/> +<wire x1="19.795775" y1="33.1" x2="21.8856" y2="31.010175" width="0.1524" layer="1"/> +<wire x1="21.8856" y1="28.88334375" x2="22.1904" y2="28.57854375" width="0.1524" layer="1"/> +<wire x1="21.8856" y1="31.010175" x2="21.8856" y2="28.88334375" width="0.1524" layer="1"/> +<wire x1="22.1904" y1="28.57854375" x2="22.1904" y2="26.4874875" width="0.1524" layer="1"/> +<wire x1="22.1904" y1="26.4874875" x2="22.4952" y2="26.1826875" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="24.07374375" x2="22.8" y2="23.76894375" width="0.1524" layer="1"/> +<wire x1="22.4952" y1="26.1826875" x2="22.4952" y2="24.07374375" width="0.1524" layer="1"/> +<wire x1="22.8" y1="21.66" x2="24.1" y2="20.36" width="0.1524" layer="1"/> +<wire x1="22.8" y1="23.76894375" x2="22.8" y2="21.66" width="0.1524" layer="1"/> </signal> <signal name="N$25"> <contactref element="U2" pad="P$9"/> <contactref element="R10" pad="1"/> -<wire x1="61.85" y1="52.0548" x2="61.85" y2="52.35" width="0.2032" layer="1"/> -<wire x1="61.85" y1="52.35" x2="62.6214" y2="51.5786" width="0.1524" layer="1"/> -<wire x1="62.6214" y1="51.5786" x2="63.6946875" y2="51.5786" width="0.1524" layer="1"/> -<wire x1="63.6946875" y1="51.5786" x2="63.8286" y2="51.4446875" width="0.1524" layer="1"/> -<wire x1="63.8286" y1="51.4446875" x2="63.8286" y2="50.1" width="0.1524" layer="1"/> -<wire x1="63.8286" y1="50.1" x2="64.42860625" y2="49.49999375" width="0.1524" layer="1"/> -<wire x1="64.42860625" y1="49.49999375" x2="66.000009375" y2="49.49999375" width="0.1524" layer="1"/> +<wire x1="29.85" y1="43.0548" x2="29.85" y2="43.35" width="0.2032" layer="1"/> +<wire x1="32.42860625" y1="40.49999375" x2="31.8286" y2="41.1" width="0.1524" layer="1"/> +<wire x1="32.42860625" y1="40.49999375" x2="34.000009375" y2="40.49999375" width="0.1524" layer="1"/> +<wire x1="31.8286" y1="41.1" x2="31.8286" y2="41.7946875" width="0.1524" layer="1"/> +<wire x1="31.8286" y1="41.7946875" x2="31.6946875" y2="41.9286" width="0.1524" layer="1"/> +<wire x1="31.6946875" y1="41.9286" x2="30.6" y2="41.9286" width="0.1524" layer="1"/> +<wire x1="30.6" y1="41.9286" x2="29.85" y2="42.6786" width="0.1524" layer="1"/> +<wire x1="29.85" y1="42.6786" x2="29.85" y2="43.0548" width="0.1524" layer="1"/> </signal> <signal name="M-GAIN"> <contactref element="U2" pad="P$10"/> -<wire x1="66.000009375" y1="48.99999375" x2="64.17765625" y2="48.99999375" width="0.1524" layer="1"/> -<wire x1="64.17765625" y1="48.99999375" x2="64.0548" y2="49.12285" width="0.1524" layer="1"/> -<via x="64.0548" y="49.12285" extent="1-16" drill="0.3"/> -<wire x1="64.0548" y1="49.12285" x2="63.97765" y2="49.2" width="0.1524" layer="16"/> -<wire x1="63.97765" y1="49.2" x2="61.579475" y2="49.2" width="0.1524" layer="16"/> -<wire x1="61.579475" y1="49.2" x2="61.009075" y2="48.6296" width="0.1524" layer="16"/> -<wire x1="61.009075" y1="48.6296" x2="58.990925" y2="48.6296" width="0.1524" layer="16"/> -<wire x1="58.990925" y1="48.6296" x2="58.0856" y2="49.534925" width="0.1524" layer="16"/> -<wire x1="58.0856" y1="52.7428" x2="57.8594" y2="52.969" width="0.1524" layer="16"/> -<via x="57.8594" y="52.969" extent="1-16" drill="0.3"/> -<wire x1="57.8594" y1="52.969" x2="57.3284" y2="53.5" width="0.1524" layer="1"/> -<wire x1="58.0856" y1="49.534925" x2="58.0856" y2="52.7428" width="0.1524" layer="16"/> -<wire x1="53.3" y1="53.5" x2="52.8096" y2="53.0096" width="0.1524" layer="1"/> -<wire x1="52.8096" y1="53.0096" x2="48.6474875" y2="53.0096" width="0.1524" layer="1"/> -<wire x1="47.74514375" y1="52.1762" x2="47.8140875" y2="52.1762" width="0.1524" layer="1"/> -<wire x1="48.6474875" y1="53.0096" x2="47.8140875" y2="52.1762" width="0.1524" layer="1"/> -<wire x1="57.3284" y1="53.5" x2="53.3" y2="53.5" width="0.1524" layer="1"/> +<wire x1="34.000009375" y1="39.99999375" x2="32.17765625" y2="39.99999375" width="0.1524" layer="1"/> +<wire x1="32.17765625" y1="39.99999375" x2="32.0548" y2="40.12285" width="0.1524" layer="1"/> +<via x="32.0548" y="40.12285" extent="1-16" drill="0.3"/> +<via x="25.8594" y="43.969" extent="1-16" drill="0.3"/> +<wire x1="25.8594" y1="43.969" x2="25.3284" y2="44.5" width="0.1524" layer="1"/> +<wire x1="21.3" y1="44.5" x2="20.8096" y2="44.0096" width="0.1524" layer="1"/> +<wire x1="20.8096" y1="44.0096" x2="16.6474875" y2="44.0096" width="0.1524" layer="1"/> +<wire x1="15.74514375" y1="43.1762" x2="15.8140875" y2="43.1762" width="0.1524" layer="1"/> +<wire x1="16.6474875" y1="44.0096" x2="15.8140875" y2="43.1762" width="0.1524" layer="1"/> +<wire x1="25.3284" y1="44.5" x2="21.3" y2="44.5" width="0.1524" layer="1"/> <contactref element="U1" pad="22"/> -<wire x1="47.15" y1="51.1" x2="47.2" y2="51.15" width="0.1524" layer="1"/> -<wire x1="47.15" y1="51.1" x2="47.15" y2="51.58105625" width="0.1524" layer="1"/> -<wire x1="47.15" y1="51.58105625" x2="47.74514375" y2="52.1762" width="0.1524" layer="1"/> -</signal> -<signal name="N$26"> -<contactref element="S3" pad="P$3"/> -<contactref element="R3" pad="1"/> -<contactref element="S3" pad="P$6"/> -<wire x1="55.96" y1="59.186" x2="57.598" y2="59.186" width="0.1524" layer="1"/> -<wire x1="57.598" y1="59.186" x2="59.056" y2="60.644" width="0.1524" layer="1"/> -<wire x1="59.056" y1="60.644" x2="59.16" y2="60.748" width="0.1524" layer="1"/> -<wire x1="59.16" y1="57.948" x2="59.16" y2="60.54" width="0.1524" layer="1"/> -<wire x1="59.16" y1="60.54" x2="59.056" y2="60.644" width="0.1524" layer="1"/> +<wire x1="15.15" y1="42.1" x2="15.2" y2="42.15" width="0.1524" layer="1"/> +<wire x1="15.15" y1="42.1" x2="15.15" y2="42.58105625" width="0.1524" layer="1"/> +<wire x1="15.15" y1="42.58105625" x2="15.74514375" y2="43.1762" width="0.1524" layer="1"/> +<wire x1="32.0548" y1="40.12285" x2="30.58725" y2="41.5904" width="0.1524" layer="16"/> +<wire x1="30.58725" y1="41.5904" x2="30.11029375" y2="41.5904" width="0.1524" layer="16"/> +<wire x1="30.11029375" y1="41.5904" x2="29.50549375" y2="42.1952" width="0.1524" layer="16"/> +<wire x1="28.21163125" y1="42.1952" x2="26.553415625" y2="43.853415625" width="0.1524" layer="16"/> +<wire x1="29.50549375" y1="42.1952" x2="28.21163125" y2="42.1952" width="0.1524" layer="16"/> +<wire x1="26.553415625" y1="43.853415625" x2="25.974984375" y2="43.853415625" width="0.1524" layer="16"/> +<wire x1="25.974984375" y1="43.853415625" x2="25.8594" y2="43.969" width="0.1524" layer="16"/> </signal> <signal name="N$35"> <contactref element="R6" pad="2"/> <contactref element="U$4" pad="2"/> -<wire x1="36.55" y1="53.5" x2="34.85" y2="53.5" width="0.1524" layer="1"/> +<wire x1="4.05" y1="45.5" x2="2.85" y2="45.5" width="0.1524" layer="1"/> </signal> <signal name="N$36"> <contactref element="R8" pad="2"/> <contactref element="U$5" pad="2"/> -<wire x1="36.55" y1="51.5" x2="34.85" y2="51.5" width="0.1524" layer="1"/> +<wire x1="4.05" y1="42.5" x2="2.85" y2="42.5" width="0.1524" layer="1"/> </signal> <signal name="I-V"> <contactref element="U2" pad="P$25"/> <contactref element="J3" pad="3"/> -<wire x1="66.000009375" y1="41.500009375" x2="64.756871875" y2="41.500009375" width="0.2032" layer="1"/> -<wire x1="64.756871875" y1="41.500009375" x2="64.2306" y2="40.9737375" width="0.2032" layer="1"/> -<via x="64.2306" y="40.9737375" extent="1-16" drill="0.35"/> -<wire x1="64.2306" y1="40.9737375" x2="63.91126875" y2="40.9737375" width="0.2032" layer="16"/> -<wire x1="63.91126875" y1="40.9737375" x2="62.93113125" y2="39.9936" width="0.2032" layer="16"/> -<wire x1="56.5736" y1="39.9936" x2="56.1" y2="39.52" width="0.2032" layer="16"/> -<wire x1="62.93113125" y1="39.9936" x2="56.5736" y2="39.9936" width="0.2032" layer="16"/> +<wire x1="34.000009375" y1="32.500009375" x2="32.756871875" y2="32.500009375" width="0.2032" layer="1"/> +<wire x1="32.756871875" y1="32.500009375" x2="32.2306" y2="31.9737375" width="0.2032" layer="1"/> +<via x="32.2306" y="31.9737375" extent="1-16" drill="0.35"/> +<wire x1="32.2306" y1="31.9737375" x2="31.91126875" y2="31.9737375" width="0.2032" layer="16"/> +<wire x1="31.91126875" y1="31.9737375" x2="30.93113125" y2="30.9936" width="0.2032" layer="16"/> +<wire x1="24.5736" y1="30.9936" x2="24.1" y2="30.52" width="0.2032" layer="16"/> +<wire x1="30.93113125" y1="30.9936" x2="24.5736" y2="30.9936" width="0.2032" layer="16"/> <contactref element="U1" pad="4"/> -<wire x1="50.4" y1="44.35" x2="51.27" y2="44.35" width="0.1524" layer="1"/> -<wire x1="51.27" y1="44.35" x2="56.1" y2="39.52" width="0.1524" layer="1"/> +<wire x1="18.4" y1="35.35" x2="19.27" y2="35.35" width="0.1524" layer="1"/> +<wire x1="19.27" y1="35.35" x2="24.1" y2="30.52" width="0.1524" layer="1"/> </signal> <signal name="I-W"> <contactref element="U2" pad="P$26"/> <contactref element="J3" pad="4"/> -<wire x1="66.000009375" y1="41.000009375" x2="67.164784375" y2="41.000009375" width="0.2032" layer="1"/> -<wire x1="67.164784375" y1="41.000009375" x2="67.1647875" y2="41.0000125" width="0.2032" layer="1"/> -<via x="67.1647875" y="41.0000125" extent="1-16" drill="0.35"/> -<wire x1="67.1647875" y1="41.0000125" x2="66.532575" y2="40.3678" width="0.2032" layer="16"/> -<wire x1="66.532575" y1="40.3678" x2="64.51873125" y2="40.3678" width="0.2032" layer="16"/> -<wire x1="64.51873125" y1="40.3678" x2="64.49246875" y2="40.3415375" width="0.2032" layer="16"/> -<wire x1="64.49246875" y1="40.3415375" x2="63.9584625" y2="40.3415375" width="0.2032" layer="16"/> -<wire x1="63.9584625" y1="40.3415375" x2="63.906134375" y2="40.393865625" width="0.2032" layer="16"/> -<wire x1="63.906134375" y1="40.393865625" x2="63.09946875" y2="39.5872" width="0.2032" layer="16"/> -<wire x1="63.09946875" y1="39.5872" x2="58.1" y2="39.5872" width="0.2032" layer="16"/> -<wire x1="58.1" y1="39.5872" x2="56.1" y2="37.5872" width="0.2032" layer="16"/> -<wire x1="56.1" y1="37.5872" x2="56.1" y2="36.98" width="0.2032" layer="16"/> +<wire x1="34.000009375" y1="32.000009375" x2="35.264784375" y2="32.000009375" width="0.2032" layer="1"/> +<wire x1="35.264784375" y1="32.000009375" x2="35.2647875" y2="32.0000125" width="0.2032" layer="1"/> +<via x="35.2647875" y="32.0000125" extent="1-16" drill="0.35"/> +<wire x1="35.2647875" y1="32.0000125" x2="34.632575" y2="31.3678" width="0.2032" layer="16"/> +<wire x1="34.632575" y1="31.3678" x2="32.51873125" y2="31.3678" width="0.2032" layer="16"/> +<wire x1="32.51873125" y1="31.3678" x2="32.49246875" y2="31.3415375" width="0.2032" layer="16"/> +<wire x1="32.49246875" y1="31.3415375" x2="31.9584625" y2="31.3415375" width="0.2032" layer="16"/> +<wire x1="31.9584625" y1="31.3415375" x2="31.906134375" y2="31.393865625" width="0.2032" layer="16"/> +<wire x1="31.906134375" y1="31.393865625" x2="31.09946875" y2="30.5872" width="0.2032" layer="16"/> +<wire x1="31.09946875" y1="30.5872" x2="26.1" y2="30.5872" width="0.2032" layer="16"/> +<wire x1="26.1" y1="30.5872" x2="24.1" y2="28.5872" width="0.2032" layer="16"/> +<wire x1="24.1" y1="28.5872" x2="24.1" y2="27.98" width="0.2032" layer="16"/> <contactref element="U1" pad="3"/> -<wire x1="50.4" y1="43.85" x2="51.33894375" y2="43.85" width="0.1524" layer="1"/> -<wire x1="54.8" y1="38.28" x2="56.1" y2="36.98" width="0.1524" layer="1"/> -<wire x1="51.33894375" y1="43.85" x2="54.8" y2="40.38894375" width="0.1524" layer="1"/> -<wire x1="54.8" y1="40.38894375" x2="54.8" y2="38.28" width="0.1524" layer="1"/> +<wire x1="18.4" y1="34.85" x2="19.33894375" y2="34.85" width="0.1524" layer="1"/> +<wire x1="22.8" y1="29.28" x2="24.1" y2="27.98" width="0.1524" layer="1"/> +<wire x1="19.33894375" y1="34.85" x2="22.8" y2="31.38894375" width="0.1524" layer="1"/> +<wire x1="22.8" y1="31.38894375" x2="22.8" y2="29.28" width="0.1524" layer="1"/> </signal> <signal name="N$10"> <contactref element="R2" pad="2"/> <contactref element="U2" pad="P$55"/> -<wire x1="73.49999375" y1="52.9999875" x2="73.50000625" y2="53" width="0.2032" layer="1"/> -<wire x1="73.50000625" y1="53" x2="74.6" y2="53" width="0.2032" layer="1"/> -<wire x1="74.6" y1="53" x2="74.7" y2="52.9" width="0.2032" layer="1"/> -<wire x1="74.7" y1="52.9" x2="75.15" y2="52.9" width="0.2032" layer="1"/> +<wire x1="41.49999375" y1="43.9999875" x2="41.50000625" y2="44" width="0.2032" layer="1"/> +<wire x1="41.50000625" y1="44" x2="42.6" y2="44" width="0.2032" layer="1"/> +<wire x1="42.6" y1="44" x2="42.7" y2="43.9" width="0.2032" layer="1"/> +<wire x1="42.7" y1="43.9" x2="43.15" y2="43.9" width="0.2032" layer="1"/> </signal> <signal name="N$19"> <contactref element="U2" pad="P$49"/> <contactref element="C8" pad="1"/> -<wire x1="74.499990625" y1="49.999990625" x2="73.49999375" y2="49.999990625" width="0.2032" layer="1"/> -<wire x1="75.3" y1="51.6" x2="75.2" y2="51.5" width="0.2032" layer="1"/> -<wire x1="75.2" y1="50.7" x2="74.499990625" y2="49.999990625" width="0.2032" layer="1"/> -<wire x1="75.2" y1="51.5" x2="75.2" y2="50.7" width="0.2032" layer="1"/> +<wire x1="42.499990625" y1="40.999990625" x2="41.49999375" y2="40.999990625" width="0.2032" layer="1"/> +<wire x1="43.3" y1="42.6" x2="43.2" y2="42.5" width="0.2032" layer="1"/> +<wire x1="43.2" y1="41.7" x2="42.499990625" y2="40.999990625" width="0.2032" layer="1"/> +<wire x1="43.2" y1="42.5" x2="43.2" y2="41.7" width="0.2032" layer="1"/> </signal> <signal name="DRV_FAULT"> <contactref element="U2" pad="P$6"/> <contactref element="J13" pad="1"/> -<wire x1="66.000009375" y1="50.999990625" x2="64.436759375" y2="50.999990625" width="0.1524" layer="1"/> -<wire x1="64.436759375" y1="50.999990625" x2="64.3596" y2="51.07715" width="0.1524" layer="1"/> -<via x="64.3596" y="51.07715" extent="1-16" drill="0.3"/> -<wire x1="64.3596" y1="51.07715" x2="64.23675" y2="51.2" width="0.1524" layer="16"/> -<wire x1="64.23675" y1="51.2" x2="62.36280625" y2="51.2" width="0.1524" layer="16"/> -<wire x1="62.36280625" y1="51.2" x2="61.2608" y2="50.09799375" width="0.1524" layer="16"/> -<wire x1="61.2608" y1="50.09799375" x2="61.2608" y2="49.7434375" width="0.1524" layer="16"/> -<wire x1="61.2608" y1="49.7434375" x2="60.7565625" y2="49.2392" width="0.1524" layer="16"/> -<wire x1="59.2434375" y1="49.2392" x2="58.6952" y2="49.7874375" width="0.1524" layer="16"/> -<wire x1="60.7565625" y1="49.2392" x2="59.2434375" y2="49.2392" width="0.1524" layer="16"/> -<wire x1="58.6952" y1="53.57374375" x2="57.484471875" y2="54.784471875" width="0.1524" layer="16"/> -<wire x1="58.6952" y1="49.7874375" x2="58.6952" y2="53.57374375" width="0.1524" layer="16"/> -<wire x1="57.484471875" y1="54.784471875" x2="56.115528125" y2="54.784471875" width="0.1524" layer="16"/> -<wire x1="56.115528125" y1="54.784471875" x2="56.1" y2="54.8" width="0.1524" layer="16"/> -<wire x1="56.1" y1="54.8" x2="55.2" y2="54.8" width="0.1524" layer="1"/> -<wire x1="55.2" y1="54.8" x2="54.2048" y2="53.8048" width="0.1524" layer="1"/> -<wire x1="54.2048" y1="53.8048" x2="53.17374375" y2="53.8048" width="0.1524" layer="1"/> -<wire x1="53.17374375" y1="53.8048" x2="52.68334375" y2="53.3144" width="0.1524" layer="1"/> -<wire x1="47.68783125" y1="52.481" x2="47.6188875" y2="52.481" width="0.1524" layer="1"/> -<wire x1="48.52123125" y1="53.3144" x2="47.68783125" y2="52.481" width="0.1524" layer="1"/> -<wire x1="52.68334375" y1="53.3144" x2="48.52123125" y2="53.3144" width="0.1524" layer="1"/> +<wire x1="24.115528125" y1="45.784471875" x2="25.484471875" y2="45.784471875" width="0.1524" layer="16"/> +<wire x1="24.115528125" y1="45.784471875" x2="24.1" y2="45.8" width="0.1524" layer="16"/> +<wire x1="24.1" y1="45.8" x2="23.2" y2="45.8" width="0.1524" layer="1"/> +<wire x1="23.2" y1="45.8" x2="22.2048" y2="44.8048" width="0.1524" layer="1"/> +<wire x1="22.2048" y1="44.8048" x2="21.17374375" y2="44.8048" width="0.1524" layer="1"/> +<wire x1="21.17374375" y1="44.8048" x2="20.68334375" y2="44.3144" width="0.1524" layer="1"/> +<wire x1="15.68783125" y1="43.481" x2="15.6188875" y2="43.481" width="0.1524" layer="1"/> +<wire x1="16.52123125" y1="44.3144" x2="15.68783125" y2="43.481" width="0.1524" layer="1"/> +<wire x1="20.68334375" y1="44.3144" x2="16.52123125" y2="44.3144" width="0.1524" layer="1"/> <contactref element="U1" pad="23"/> -<wire x1="46.65" y1="51.5121125" x2="46.65" y2="51.1" width="0.1524" layer="1"/> -<wire x1="47.6188875" y1="52.481" x2="46.65" y2="51.5121125" width="0.1524" layer="1"/> +<wire x1="14.65" y1="42.5121125" x2="14.65" y2="42.1" width="0.1524" layer="1"/> +<wire x1="15.6188875" y1="43.481" x2="14.65" y2="42.5121125" width="0.1524" layer="1"/> +<wire x1="25.484471875" y1="45.784471875" x2="27.984471875" y2="43.284471875" width="0.1524" layer="16"/> +<wire x1="27.984471875" y1="43.284471875" x2="28.46414375" y2="42.8048" width="0.1524" layer="16"/> +<wire x1="28.46414375" y1="42.8048" x2="29.75800625" y2="42.8048" width="0.1524" layer="16"/> +<wire x1="34.000009375" y1="41.999990625" x2="32.861565625" y2="41.999990625" width="0.1524" layer="1"/> +<wire x1="32.861565625" y1="41.999990625" x2="32.70580625" y2="42.15575" width="0.1524" layer="1"/> +<wire x1="32.32965" y1="42.15575" x2="31.9472" y2="42.5382" width="0.1524" layer="1"/> +<wire x1="32.70580625" y1="42.15575" x2="32.32965" y2="42.15575" width="0.1524" layer="1"/> +<wire x1="31.2262" y1="42.5382" x2="31" y2="42.7644" width="0.1524" layer="1"/> +<via x="31" y="42.7644" extent="1-16" drill="0.3"/> +<wire x1="31" y1="42.7644" x2="29.79840625" y2="42.7644" width="0.1524" layer="16"/> +<wire x1="29.79840625" y1="42.7644" x2="29.75800625" y2="42.8048" width="0.1524" layer="16"/> +<wire x1="31.9472" y1="42.5382" x2="31.2262" y2="42.5382" width="0.1524" layer="1"/> </signal> <signal name="N$23"> <contactref element="R12" pad="2"/> <contactref element="U$8" pad="2"/> -<wire x1="36.55" y1="49.5" x2="34.85" y2="49.5" width="0.1524" layer="1"/> +<wire x1="4.05" y1="39.5" x2="2.85" y2="39.5" width="0.1524" layer="1"/> </signal> <signal name="N$2"> <contactref element="R25" pad="2"/> -<contactref element="U$9" pad="GL"/> -<via x="83.8" y="52.1806" extent="1-16" drill="0.35"/> -<wire x1="84.57625" y1="51.9548" x2="84.3258" y2="51.9548" width="0.2032" layer="1"/> -<wire x1="84.3258" y1="51.9548" x2="83.8" y2="52.1806" width="0.2032" layer="1"/> -<wire x1="86.75" y1="51.75" x2="84.78105" y2="51.75" width="0.2032" layer="1"/> -<wire x1="84.78105" y1="51.75" x2="84.57625" y2="51.9548" width="0.2032" layer="1"/> -<wire x1="83.8" y1="52.1806" x2="83.7806" y2="52.2" width="0.2032" layer="16"/> -<wire x1="83.7806" y1="52.2" x2="82.914875" y2="52.2" width="0.2032" layer="16"/> -<via x="81.965" y="54.887" extent="1-16" drill="0.35"/> -<wire x1="81.965" y1="54.10786875" x2="81.965" y2="54.887" width="0.2032" layer="16"/> -<wire x1="82.765" y1="52.349875" x2="82.765" y2="53.30786875" width="0.2032" layer="16"/> -<wire x1="82.765" y1="53.30786875" x2="81.965" y2="54.10786875" width="0.2032" layer="16"/> -<wire x1="82.914875" y1="52.2" x2="82.765" y2="52.349875" width="0.2032" layer="16"/> +<contactref element="Q2" pad="P$4"/> +<wire x1="52.195" y1="34.095" x2="52.05" y2="33.95" width="0.2032" layer="1"/> +<contactref element="Q7" pad="P$4"/> +<wire x1="52.05" y1="33.95" x2="54.055" y2="33.95" width="0.2032" layer="1"/> +<wire x1="54.055" y1="33.95" x2="55.7" y2="35.595" width="0.2032" layer="1"/> +<via x="55.7" y="35.595" extent="1-16" drill="0.3"/> +<wire x1="55.7" y1="35.595" x2="53.5" y2="35.595" width="0.2032" layer="16"/> +<wire x1="53.5" y1="35.595" x2="53.5" y2="42.1" width="0.2032" layer="16"/> +<wire x1="53.5" y1="42.1" x2="55.6436" y2="42.1" width="0.2032" layer="16"/> +<wire x1="55.6436" y1="42.1" x2="55.7" y2="42.0436" width="0.2032" layer="16"/> +<via x="55.7" y="42.0436" extent="1-16" drill="0.3"/> +<wire x1="55.7" y1="42.0436" x2="55.7" y2="42.095" width="0" layer="19" extent="1-1"/> </signal> <signal name="N$3"> -<contactref element="U$9" pad="GH"/> <contactref element="R24" pad="2"/> -<wire x1="82.1328" y1="53.046" x2="81.965" y2="53.046" width="0.2032" layer="1"/> -<wire x1="82.1328" y1="52.4073375" x2="82.1328" y2="53.046" width="0.2032" layer="16"/> -<via x="82.1328" y="53.046" extent="1-16" drill="0.35"/> -<via x="82.9" y="51.359" extent="1-16" drill="0.35"/> -<wire x1="82.9" y1="51.359" x2="82.6064" y2="51.6526" width="0.2032" layer="16"/> -<wire x1="82.6064" y1="51.6526" x2="82.6064" y2="51.9337375" width="0.2032" layer="16"/> -<wire x1="82.6064" y1="51.9337375" x2="82.1328" y2="52.4073375" width="0.2032" layer="16"/> -<wire x1="91.87625" y1="51.6798" x2="92.0548" y2="51.50125" width="0.2032" layer="1"/> -<wire x1="92.0548" y1="51.50125" x2="92.0548" y2="50.89875" width="0.2032" layer="1"/> -<wire x1="92.0548" y1="50.89875" x2="91.87625" y2="50.7202" width="0.2032" layer="1"/> -<wire x1="91.75" y1="51.75" x2="91.8202" y2="51.6798" width="0.2032" layer="1"/> -<wire x1="91.8202" y1="51.6798" x2="91.87625" y2="51.6798" width="0.2032" layer="1"/> -<wire x1="91.12375" y1="50.7202" x2="90.74395" y2="51.1" width="0.2032" layer="1"/> -<wire x1="91.87625" y1="50.7202" x2="91.12375" y2="50.7202" width="0.2032" layer="1"/> -<wire x1="87.37625" y1="50.7202" x2="86.62375" y2="50.7202" width="0.2032" layer="1"/> -<wire x1="87.75605" y1="51.1" x2="87.37625" y2="50.7202" width="0.2032" layer="1"/> -<wire x1="86.62375" y1="50.7202" x2="86.00035" y2="51.3436" width="0.2032" layer="1"/> -<wire x1="90.74395" y1="51.1" x2="87.75605" y2="51.1" width="0.2032" layer="1"/> -<wire x1="82.9154" y1="51.3436" x2="82.9" y2="51.359" width="0.2032" layer="1"/> -<wire x1="86.00035" y1="51.3436" x2="82.9154" y2="51.3436" width="0.2032" layer="1"/> +<contactref element="Q1" pad="P$4"/> +<wire x1="52.2" y1="44.55" x2="52.05" y2="44.55" width="0.2032" layer="1"/> +<contactref element="Q8" pad="P$4"/> +<wire x1="73.905" y1="40.7" x2="73.9" y2="40.705" width="0.2032" layer="1"/> +<wire x1="73.9" y1="40.705" x2="73.9" y2="41.546" width="0.2032" layer="1"/> +<wire x1="73.9" y1="41.546" x2="67.4" y2="41.546" width="0.2032" layer="1"/> +<wire x1="67.4" y1="41.546" x2="67.4" y2="40.705" width="0.2032" layer="1"/> +<wire x1="67.4" y1="40.705" x2="67.405" y2="40.7" width="0.2032" layer="1"/> +<via x="52.05" y="44.55" extent="1-16" drill="0.3"/> +<wire x1="62.4" y1="41.546" x2="67.4" y2="41.546" width="0.2032" layer="1"/> +<wire x1="52.05" y1="44.55" x2="53.05" y2="44.55" width="0.2032" layer="16"/> +<wire x1="53.05" y1="44.55" x2="53.4" y2="44.9" width="0.2032" layer="16"/> +<wire x1="53.4" y1="44.9" x2="53.4" y2="49.6" width="0.2032" layer="16"/> +<wire x1="53.4" y1="49.6" x2="62.4" y2="49.6" width="0.2032" layer="16"/> +<wire x1="62.4" y1="49.6" x2="62.4" y2="41.546" width="0.2032" layer="16"/> +<via x="62.4" y="41.546" extent="1-16" drill="0.3"/> </signal> <signal name="N$4"> <contactref element="R28" pad="2"/> -<contactref element="U$10" pad="GH"/> -<wire x1="91.87625" y1="43.1798" x2="92.0548" y2="43.00125" width="0.2032" layer="1"/> -<wire x1="92.0548" y1="43.00125" x2="92.0548" y2="42.39875" width="0.2032" layer="1"/> -<wire x1="92.0548" y1="42.39875" x2="91.87625" y2="42.2202" width="0.2032" layer="1"/> -<wire x1="91.87625" y1="42.2202" x2="91.12375" y2="42.2202" width="0.2032" layer="1"/> -<wire x1="91.75" y1="43.25" x2="91.8202" y2="43.1798" width="0.2032" layer="1"/> -<wire x1="91.8202" y1="43.1798" x2="91.87625" y2="43.1798" width="0.2032" layer="1"/> -<wire x1="91.12375" y1="42.2202" x2="90.64395" y2="42.7" width="0.2032" layer="1"/> -<wire x1="87.85605" y1="42.7" x2="87.37625" y2="42.2202" width="0.2032" layer="1"/> -<wire x1="87.37625" y1="42.2202" x2="86.4798" y2="42.2202" width="0.2032" layer="1"/> -<wire x1="90.64395" y1="42.7" x2="87.85605" y2="42.7" width="0.2032" layer="1"/> -<wire x1="85.53096875" y1="43.16903125" x2="83.6" y2="43.16903125" width="0.2032" layer="1"/> -<wire x1="86.4798" y1="42.2202" x2="85.53096875" y2="43.16903125" width="0.2032" layer="1"/> -<wire x1="80.68096875" y1="43.16903125" x2="80.25" y2="43.6" width="0.2032" layer="1"/> -<wire x1="81.20198125" y1="43.16903125" x2="80.68096875" y2="43.16903125" width="0.2032" layer="1"/> -<wire x1="83.6" y1="43.16903125" x2="83.051021875" y2="43.181646875" width="0.2032" layer="1"/> -<wire x1="83.051021875" y1="43.181646875" x2="82.81986875" y2="43.4128" width="0.2032" layer="1"/> -<wire x1="82.81986875" y1="43.4128" x2="81.44575" y2="43.4128" width="0.2032" layer="1"/> -<wire x1="81.44575" y1="43.4128" x2="81.20198125" y2="43.16903125" width="0.2032" layer="1"/> +<contactref element="Q4" pad="P$4"/> +<contactref element="Q9" pad="P$4"/> +<wire x1="73.905" y1="26.7" x2="73.9" y2="26.705" width="0.2032" layer="1"/> +<wire x1="73.9" y1="27.5" x2="67.4" y2="27.5" width="0.2032" layer="1"/> +<wire x1="67.4" y1="27.5" x2="62.6" y2="27.5" width="0.2032" layer="1"/> +<wire x1="73.9" y1="26.705" x2="73.9" y2="27.5" width="0.2032" layer="1"/> +<wire x1="67.405" y1="26.7" x2="67.4" y2="26.705" width="0.2032" layer="1"/> +<wire x1="67.4" y1="26.705" x2="67.4" y2="27.5" width="0.2032" layer="1"/> +<wire x1="53.4" y1="34.3" x2="62.4" y2="34.3" width="0.2032" layer="16"/> +<wire x1="62.4" y1="34.3" x2="62.4" y2="27.7" width="0.2032" layer="16"/> +<wire x1="62.4" y1="27.7" x2="62.6" y2="27.5" width="0.2032" layer="16"/> +<via x="62.6" y="27.5" extent="1-16" drill="0.3"/> +<wire x1="52.05" y1="32" x2="52.362" y2="32" width="0.2032" layer="1"/> +<wire x1="52.362" y1="32" x2="53.4" y2="33.038" width="0.2032" layer="1"/> +<via x="53.4" y="33.038" extent="1-16" drill="0.3"/> +<wire x1="53.4" y1="33.038" x2="53.4" y2="34.3" width="0.2032" layer="16"/> </signal> <signal name="N$24"> <contactref element="R29" pad="2"/> -<contactref element="U$10" pad="GL"/> -<wire x1="86.0247375" y1="43.25" x2="86.75" y2="43.25" width="0.2032" layer="1"/> -<wire x1="82.98820625" y1="43.8192" x2="83.2232" y2="43.58420625" width="0.2032" layer="1"/> -<wire x1="81.6308" y1="43.8192" x2="82.98820625" y2="43.8192" width="0.2032" layer="1"/> -<wire x1="83.2232" y1="43.58420625" x2="85.69053125" y2="43.58420625" width="0.2032" layer="1"/> -<wire x1="85.69053125" y1="43.58420625" x2="86.0247375" y2="43.25" width="0.2032" layer="1"/> -<wire x1="80.25" y1="45.2" x2="81.6308" y2="43.8192" width="0.2032" layer="1"/> +<contactref element="Q3" pad="P$4"/> +<contactref element="Q10" pad="P$4"/> +<wire x1="52.05" y1="22.2" x2="52.6" y2="22.2" width="0.2032" layer="1"/> +<wire x1="53.205" y1="21.595" x2="55.7" y2="21.595" width="0.2032" layer="1"/> +<wire x1="52.6" y1="22.2" x2="53.205" y2="21.595" width="0.2032" layer="1"/> +<via x="55.7" y="21.595" extent="1-16" drill="0.3"/> +<wire x1="55.7" y1="21.595" x2="55.695" y2="21.6" width="0.2032" layer="16"/> +<wire x1="55.695" y1="21.6" x2="53.7" y2="21.6" width="0.2032" layer="16"/> +<wire x1="53.7" y1="28.1" x2="53.705" y2="28.095" width="0.2032" layer="16"/> +<wire x1="53.705" y1="28.095" x2="55.7" y2="28.095" width="0.2032" layer="16"/> +<via x="55.7" y="28.095" extent="1-16" drill="0.3"/> +<wire x1="53.7" y1="21.6" x2="53.7" y2="28.1" width="0.2032" layer="16"/> </signal> <signal name="N$5"> <contactref element="R33" pad="2"/> -<contactref element="U$11" pad="GH"/> -<wire x1="91.87625" y1="35.1798" x2="92.0548" y2="35.00125" width="0.2032" layer="1"/> -<wire x1="92.0548" y1="35.00125" x2="92.0548" y2="34.39875" width="0.2032" layer="1"/> -<wire x1="92.0548" y1="34.39875" x2="91.87625" y2="34.2202" width="0.2032" layer="1"/> -<wire x1="91.87625" y1="34.2202" x2="91.12375" y2="34.2202" width="0.2032" layer="1"/> -<wire x1="91.75" y1="35.25" x2="91.8202" y2="35.1798" width="0.2032" layer="1"/> -<wire x1="91.8202" y1="35.1798" x2="91.87625" y2="35.1798" width="0.2032" layer="1"/> -<wire x1="90.74395" y1="34.6" x2="87.7" y2="34.6" width="0.2032" layer="1"/> -<wire x1="91.12375" y1="34.2202" x2="90.74395" y2="34.6" width="0.2032" layer="1"/> -<wire x1="87.37625" y1="34.2202" x2="87.5548" y2="34.39875" width="0.2032" layer="1"/> -<wire x1="87.7" y1="34.6" x2="87.5548" y2="34.4548" width="0.2032" layer="1"/> -<wire x1="87.5548" y1="34.4548" x2="87.5548" y2="34.39875" width="0.2032" layer="1"/> -<wire x1="81.9202" y1="34.2202" x2="81.9182" y2="34.2182" width="0.2032" layer="1"/> -<wire x1="81.13295" y1="33.95" x2="80.25" y2="33.95" width="0.2032" layer="1"/> -<wire x1="81.9182" y1="34.2182" x2="81.40115" y2="34.2182" width="0.2032" layer="1"/> -<wire x1="81.40115" y1="34.2182" x2="81.13295" y2="33.95" width="0.2032" layer="1"/> -<wire x1="81.9182" y1="34.2182" x2="82.25153125" y2="34.2182" width="0.2032" layer="1"/> -<wire x1="82.25153125" y1="34.2182" x2="82.29613125" y2="34.2628" width="0.2032" layer="1"/> -<wire x1="82.29613125" y1="34.2628" x2="82.81986875" y2="34.2628" width="0.2032" layer="1"/> -<wire x1="82.81986875" y1="34.2628" x2="82.86246875" y2="34.2202" width="0.2032" layer="1"/> -<wire x1="82.86246875" y1="34.2202" x2="87.37625" y2="34.2202" width="0.2032" layer="1"/> +<contactref element="Q6" pad="P$4"/> +<wire x1="52.05" y1="20.5" x2="52.25" y2="20.3" width="0.2032" layer="1"/> +<contactref element="Q11" pad="P$4"/> +<via x="52.05" y="20.5" extent="1-16" drill="0.3"/> +<wire x1="52.05" y1="20.5" x2="53.15" y2="19.4" width="0.2032" layer="16"/> +<wire x1="62.4" y1="19.4" x2="62.4" y2="13.5" width="0.2032" layer="16"/> +<via x="62.4" y="13.5" extent="1-16" drill="0.3"/> +<wire x1="53.15" y1="19.4" x2="62.4" y2="19.4" width="0.2032" layer="16"/> +<wire x1="73.905" y1="12.7" x2="73.9" y2="12.705" width="0.2032" layer="1"/> +<wire x1="73.9" y1="12.705" x2="73.9" y2="13.5" width="0.2032" layer="1"/> +<wire x1="73.9" y1="13.5" x2="67.4" y2="13.5" width="0.2032" layer="1"/> +<wire x1="67.4" y1="13.5" x2="62.4" y2="13.5" width="0.2032" layer="1"/> +<wire x1="67.405" y1="12.7" x2="67.405" y2="13.495" width="0.2032" layer="1"/> +<wire x1="67.405" y1="13.495" x2="67.4" y2="13.5" width="0.2032" layer="1"/> </signal> <signal name="N$6"> -<contactref element="U$11" pad="GL"/> <contactref element="R34" pad="2"/> -<wire x1="86.75" y1="35.25" x2="86.6798" y2="35.1798" width="0.2032" layer="1"/> -<wire x1="86.6798" y1="35.1798" x2="86.62375" y2="35.1798" width="0.2032" layer="1"/> -<wire x1="86.62375" y1="35.1798" x2="86.07055" y2="34.6266" width="0.2032" layer="1"/> -<wire x1="81.6734" y1="34.6266" x2="80.25" y2="36.05" width="0.2032" layer="1"/> -<wire x1="83.03080625" y1="34.6266" x2="82.98820625" y2="34.6692" width="0.2032" layer="1"/> -<wire x1="82.12779375" y1="34.6692" x2="82.08519375" y2="34.6266" width="0.2032" layer="1"/> -<wire x1="82.08519375" y1="34.6266" x2="81.6734" y2="34.6266" width="0.2032" layer="1"/> -<wire x1="82.98820625" y1="34.6692" x2="82.12779375" y2="34.6692" width="0.2032" layer="1"/> -<wire x1="86.07055" y1="34.6266" x2="83.03080625" y2="34.6266" width="0.2032" layer="1"/> -</signal> -<signal name="THERMISTOR"> -<contactref element="R13" pad="2"/> -<contactref element="R14" pad="1"/> -<wire x1="88.2" y1="32.75" x2="88.2" y2="31.25" width="0.2032" layer="1"/> +<contactref element="Q5" pad="P$4"/> +<contactref element="Q12" pad="P$4"/> +<via x="51.05" y="13.95" extent="1-16" drill="0.3"/> +<wire x1="51.05" y1="13.95" x2="53.4" y2="13.95" width="0.2032" layer="16"/> +<wire x1="53.4" y1="13.95" x2="55.555" y2="13.95" width="0.2032" layer="16"/> +<wire x1="55.555" y1="13.95" x2="55.7" y2="14.095" width="0.2032" layer="16"/> +<via x="55.7" y="14.095" extent="1-16" drill="0.3"/> +<wire x1="53.4" y1="13.95" x2="53.5" y2="13.85" width="0.2032" layer="16"/> +<wire x1="53.5" y1="13.85" x2="53.5" y2="7.5" width="0.2032" layer="16"/> +<wire x1="53.5" y1="7.5" x2="55.605" y2="7.5" width="0.2032" layer="16"/> +<wire x1="55.605" y1="7.5" x2="55.7" y2="7.595" width="0.2032" layer="16"/> +<via x="55.7" y="7.595" extent="1-16" drill="0.3"/> </signal> <signal name="STLCLK"> <contactref element="R8" pad="1"/> <contactref element="U1" pad="37"/> -<wire x1="37.8714" y1="50.1946875" x2="37.8714" y2="48.8053125" width="0.1524" layer="1"/> -<wire x1="37.8714" y1="48.8053125" x2="38.4901125" y2="48.1866" width="0.1524" layer="1"/> -<wire x1="38.4901125" y1="48.1866" x2="40.37094375" y2="48.1866" width="0.1524" layer="1"/> -<wire x1="40.37094375" y1="48.1866" x2="40.53434375" y2="48.35" width="0.1524" layer="1"/> -<wire x1="40.53434375" y1="48.35" x2="41.4" y2="48.35" width="0.1524" layer="1"/> -<wire x1="38.45" y1="50.7732875" x2="37.8714" y2="50.1946875" width="0.1524" layer="1"/> -<wire x1="38.45" y1="51.5" x2="38.45" y2="50.7732875" width="0.1524" layer="1"/> +<wire x1="5.95" y1="42.5" x2="5.346" y2="41.896" width="0.2032" layer="1"/> +<wire x1="5.346" y1="38.7947875" x2="5.4947875" y2="38.646" width="0.2032" layer="1"/> +<wire x1="5.4947875" y1="38.646" x2="6.4052125" y2="38.646" width="0.2032" layer="1"/> +<wire x1="6.4052125" y1="38.646" x2="6.9036125" y2="39.1444" width="0.2032" layer="1"/> +<wire x1="5.346" y1="41.896" x2="5.346" y2="38.7947875" width="0.2032" layer="1"/> +<wire x1="8.7421125" y1="39.35" x2="9.4" y2="39.35" width="0.2032" layer="1"/> +<wire x1="8.5365125" y1="39.1444" x2="8.7421125" y2="39.35" width="0.2032" layer="1"/> +<wire x1="6.9036125" y1="39.1444" x2="8.5365125" y2="39.1444" width="0.2032" layer="1"/> </signal> <signal name="STLERR"> <contactref element="R12" pad="1"/> <contactref element="U1" pad="36"/> -<wire x1="39.1214" y1="48.6253125" x2="39.2553125" y2="48.4914" width="0.1524" layer="1"/> -<wire x1="39.2553125" y1="48.4914" x2="40.2446875" y2="48.4914" width="0.1524" layer="1"/> -<wire x1="39.1214" y1="48.8286" x2="39.1214" y2="48.6253125" width="0.1524" layer="1"/> -<wire x1="40.6032875" y1="48.85" x2="41.4" y2="48.85" width="0.1524" layer="1"/> -<wire x1="40.2446875" y1="48.4914" x2="40.6032875" y2="48.85" width="0.1524" layer="1"/> -<wire x1="38.45" y1="49.5" x2="39.1214" y2="48.8286" width="0.1524" layer="1"/> +<wire x1="5.95" y1="39.5" x2="7.7" y2="39.5" width="0.2032" layer="1"/> +<wire x1="7.7" y1="39.5" x2="7.866" y2="39.666" width="0.2032" layer="1"/> +<wire x1="8.7392125" y1="39.85" x2="9.4" y2="39.85" width="0.2032" layer="1"/> +<wire x1="8.5552125" y1="39.666" x2="8.7392125" y2="39.85" width="0.2032" layer="1"/> +<wire x1="7.866" y1="39.666" x2="8.5552125" y2="39.666" width="0.2032" layer="1"/> </signal> <signal name="ENC_MISO"> <contactref element="J6" pad="3"/> <contactref element="U1" pad="32"/> -<wire x1="42.15" y1="51.1" x2="42.15" y2="53.3467125" width="0.1524" layer="1"/> -<wire x1="43.2086" y1="55.4086" x2="43.5" y2="55.7" width="0.1524" layer="1"/> -<wire x1="42.15" y1="53.3467125" x2="43.2086" y2="54.4053125" width="0.1524" layer="1"/> -<wire x1="43.2086" y1="54.4053125" x2="43.2086" y2="55.4086" width="0.1524" layer="1"/> -<wire x1="43.5" y1="55.7" x2="43.5" y2="56.725" width="0.1524" layer="1"/> +<contactref element="J19" pad="1"/> +<wire x1="10.3" y1="48.925" x2="10.3" y2="46.3" width="0.2032" layer="1"/> +<wire x1="10.15" y1="42.1" x2="10.15" y2="46.15" width="0.2032" layer="1"/> +<wire x1="10.15" y1="46.15" x2="10.3" y2="46.3" width="0.2032" layer="1"/> </signal> <signal name="ENC_SCK"> <contactref element="J6" pad="4"/> <contactref element="U1" pad="31"/> -<wire x1="42.65" y1="53.41565625" x2="42.65" y2="51.1" width="0.1524" layer="1"/> -<wire x1="44.5" y1="56.725" x2="44.5" y2="55.26565625" width="0.1524" layer="1"/> -<wire x1="44.5" y1="55.26565625" x2="42.65" y2="53.41565625" width="0.1524" layer="1"/> +<contactref element="J19" pad="2"/> +<wire x1="10.65" y1="42.1" x2="10.65" y2="44.11" width="0.2032" layer="1"/> +<wire x1="10.65" y1="44.11" x2="12.77" y2="46.23" width="0.2032" layer="1"/> +<wire x1="12.77" y1="46.23" x2="12.84" y2="46.3" width="0.2032" layer="1"/> +<wire x1="11.3" y1="47.7" x2="12.77" y2="46.23" width="0.2032" layer="1"/> +<wire x1="11.3" y1="48.925" x2="11.3" y2="47.7" width="0.2032" layer="1"/> </signal> <signal name="ENC_CSN"> <contactref element="J6" pad="5"/> <contactref element="U1" pad="30"/> -<wire x1="43.15" y1="51.1" x2="43.15" y2="53.4846" width="0.1524" layer="1"/> -<wire x1="45.5" y1="55.8346" x2="45.5" y2="56.725" width="0.1524" layer="1"/> -<wire x1="43.15" y1="53.4846" x2="45.5" y2="55.8346" width="0.1524" layer="1"/> +<contactref element="J19" pad="3"/> +<wire x1="11.15" y1="42.1" x2="11.15" y2="43.55" width="0.2032" layer="1"/> +<wire x1="13.98" y1="44.9" x2="15.38" y2="46.3" width="0.2032" layer="1"/> +<wire x1="11.15" y1="43.55" x2="12.5" y2="44.9" width="0.2032" layer="1"/> +<wire x1="12.5" y1="44.9" x2="13.98" y2="44.9" width="0.2032" layer="1"/> +<wire x1="12.3" y1="48.925" x2="12.3" y2="47.9" width="0.2032" layer="1"/> +<wire x1="12.3" y1="47.9" x2="12.7062" y2="47.4938" width="0.2032" layer="1"/> +<wire x1="12.7062" y1="47.4938" x2="13.33449375" y2="47.4938" width="0.2032" layer="1"/> +<wire x1="14.52829375" y1="46.3" x2="15.38" y2="46.3" width="0.2032" layer="1"/> +<wire x1="13.33449375" y1="47.4938" x2="14.52829375" y2="46.3" width="0.2032" layer="1"/> </signal> <signal name="ENC_MOSI"> <contactref element="J6" pad="6"/> <contactref element="U1" pad="33"/> -<wire x1="41.4" y1="50.35" x2="41.5" y2="50.45" width="0.1524" layer="1"/> -<wire x1="41.5" y1="50.45" x2="41.5" y2="52.6" width="0.1524" layer="1"/> -<via x="41.5" y="52.6" extent="1-16" drill="0.3"/> -<wire x1="41.5" y1="52.6" x2="45.625" y2="56.725" width="0.1524" layer="16"/> -<wire x1="45.625" y1="56.725" x2="46.5" y2="56.725" width="0.1524" layer="16"/> -<via x="46.5" y="56.725" extent="1-16" drill="0.3"/> +<contactref element="J19" pad="4"/> +<wire x1="9.4" y1="41.35" x2="9.5" y2="41.45" width="0.2032" layer="1"/> +<wire x1="9.5" y1="41.45" x2="9.5" y2="42.8" width="0.2032" layer="1"/> +<via x="9.5" y="42.8" extent="1-16" drill="0.3"/> +<wire x1="9.5" y1="42.8" x2="11.6" y2="44.9" width="0.2032" layer="16"/> +<wire x1="14.1" y1="45.6" x2="14.1" y2="47.7" width="0.2032" layer="16"/> +<via x="14.1" y="47.7" extent="1-16" drill="0.3"/> +<wire x1="14.1" y1="47.7" x2="14.1" y2="48.125" width="0.2032" layer="1"/> +<wire x1="14.1" y1="48.125" x2="13.3" y2="48.925" width="0.2032" layer="1"/> +<wire x1="11.6" y1="44.9" x2="13.4" y2="44.9" width="0.2032" layer="16"/> +<wire x1="13.4" y1="44.9" x2="14.1" y2="45.6" width="0.2032" layer="16"/> +<wire x1="14.1" y1="48.125" x2="16.095" y2="48.125" width="0.2032" layer="1"/> +<wire x1="16.095" y1="48.125" x2="17.92" y2="46.3" width="0.2032" layer="1"/> </signal> <signal name="N$12"> <contactref element="Y1" pad="1"/> <contactref element="U1" pad="58"/> -<wire x1="45.85" y1="39.6" x2="46.3714" y2="40.1214" width="0.1524" layer="1"/> -<wire x1="46.3714" y1="40.1214" x2="46.3714" y2="40.4446875" width="0.1524" layer="1"/> -<wire x1="46.65" y1="40.7232875" x2="46.65" y2="42.1" width="0.1524" layer="1"/> -<wire x1="46.3714" y1="40.4446875" x2="46.65" y2="40.7232875" width="0.1524" layer="1"/> +<wire x1="13.85" y1="30.6" x2="14.3714" y2="31.1214" width="0.1524" layer="1"/> +<wire x1="14.3714" y1="31.1214" x2="14.3714" y2="31.4446875" width="0.1524" layer="1"/> +<wire x1="14.65" y1="31.7232875" x2="14.65" y2="33.1" width="0.1524" layer="1"/> +<wire x1="14.3714" y1="31.4446875" x2="14.65" y2="31.7232875" width="0.1524" layer="1"/> </signal> <signal name="N$17"> <contactref element="U1" pad="59"/> <contactref element="Y1" pad="3"/> -<wire x1="47.15" y1="42.1" x2="47.15" y2="40.5232875" width="0.1524" layer="1"/> -<wire x1="47.15" y1="40.5232875" x2="47.2286" y2="40.4446875" width="0.1524" layer="1"/> -<wire x1="47.2286" y1="40.4446875" x2="47.2286" y2="40.1214" width="0.1524" layer="1"/> -<wire x1="47.2286" y1="40.1214" x2="47.75" y2="39.6" width="0.1524" layer="1"/> -</signal> -<signal name="N$1"> -<contactref element="R7" pad="2"/> -<contactref element="J1" pad="YLWN"/> -<wire x1="42.1" y1="34.47" x2="42.1" y2="28.6" width="0.1524" layer="1"/> -<wire x1="42.1" y1="28.6" x2="40.6" y2="27.1" width="0.1524" layer="1"/> -<via x="40.6" y="27.1" extent="1-16" drill="0.3"/> -<wire x1="40.6" y1="27.1" x2="40.6" y2="23.6" width="0.1524" layer="16"/> -<wire x1="40.6" y1="23.6" x2="39.5" y2="22.5" width="0.1524" layer="16"/> -<wire x1="39.5" y1="22.5" x2="37.3" y2="22.5" width="0.1524" layer="16"/> -<wire x1="37.3" y1="22.5" x2="34.4" y2="25.4" width="0.1524" layer="16"/> -<wire x1="34.4" y1="25.4" x2="34.4" y2="34.7" width="0.1524" layer="16"/> -<wire x1="34.4" y1="34.7" x2="36" y2="36.3" width="0.1524" layer="16"/> -<wire x1="36" y1="36.3" x2="36" y2="40.2" width="0.1524" layer="16"/> -<wire x1="36" y1="40.2" x2="34.7" y2="41.5" width="0.1524" layer="16"/> -<via x="34.7" y="41.5" extent="1-16" drill="0.3"/> -<wire x1="34.7" y1="41.5" x2="33.05" y2="43.15" width="0.1524" layer="1"/> -<wire x1="33.05" y1="43.15" x2="33.05" y2="45.5" width="0.1524" layer="1"/> -</signal> -<signal name="N$22"> -<contactref element="R9" pad="2"/> -<contactref element="J1" pad="GRNN"/> -<wire x1="42.1" y1="22.99" x2="40.49" y2="22.99" width="0.1524" layer="1"/> -<wire x1="40.49" y1="22.99" x2="40" y2="22.5" width="0.1524" layer="1"/> -<wire x1="40" y1="22.5" x2="37.3" y2="22.5" width="0.1524" layer="1"/> -<wire x1="34.4" y1="25.4" x2="34.4" y2="34.7" width="0.1524" layer="1"/> -<wire x1="34.4" y1="34.7" x2="36" y2="36.3" width="0.1524" layer="1"/> -<wire x1="33.8" y1="46.75" x2="33.05" y2="47.5" width="0.1524" layer="1"/> -<wire x1="37.3" y1="22.5" x2="34.4" y2="25.4" width="0.1524" layer="1"/> -<wire x1="36" y1="36.3" x2="36" y2="41.2" width="0.1524" layer="1"/> -<wire x1="36" y1="41.2" x2="33.8" y2="43.4" width="0.1524" layer="1"/> -<wire x1="33.8" y1="43.4" x2="33.8" y2="46.75" width="0.1524" layer="1"/> +<wire x1="15.15" y1="33.1" x2="15.15" y2="31.5232875" width="0.1524" layer="1"/> +<wire x1="15.15" y1="31.5232875" x2="15.2286" y2="31.4446875" width="0.1524" layer="1"/> +<wire x1="15.2286" y1="31.4446875" x2="15.2286" y2="31.1214" width="0.1524" layer="1"/> +<wire x1="15.2286" y1="31.1214" x2="15.75" y2="30.6" width="0.1524" layer="1"/> </signal> <signal name="ATK0-RXLED"> <contactref element="R9" pad="1"/> -<contactref element="U1" pad="40"/> -<wire x1="34.95" y1="47.5" x2="35.6" y2="46.85" width="0.1524" layer="1"/> -<wire x1="35.6" y1="46.85" x2="41.4" y2="46.85" width="0.1524" layer="1"/> +<contactref element="U1" pad="46"/> +<wire x1="18.05" y1="17.5" x2="18.05" y2="12.55" width="0.2032" layer="1"/> +<wire x1="18.05" y1="12.55" x2="19.3" y2="11.3" width="0.2032" layer="1"/> +<wire x1="19.3" y1="11.3" x2="19.3" y2="7.6" width="0.2032" layer="1"/> +<wire x1="19.3" y1="7.6" x2="18.5" y2="6.8" width="0.2032" layer="1"/> +<wire x1="18.5" y1="6.8" x2="11.2" y2="6.8" width="0.2032" layer="1"/> +<wire x1="11.2" y1="6.8" x2="8.8" y2="9.2" width="0.2032" layer="1"/> +<wire x1="6.6" y1="16.4" x2="5.9" y2="17.1" width="0.2032" layer="1"/> +<wire x1="5.9" y1="17.1" x2="5.9" y2="18.5" width="0.2032" layer="1"/> +<via x="5.9" y="18.5" extent="1-16" drill="0.3"/> +<via x="6.456565625" y="33.143434375" extent="1-16" drill="0.3"/> +<wire x1="5.9" y1="18.5" x2="5.9" y2="31.41313125" width="0.2032" layer="16"/> +<wire x1="5.9" y1="31.41313125" x2="5.8436" y2="31.46953125" width="0.2032" layer="16"/> +<wire x1="5.8436" y1="31.46953125" x2="5.8436" y2="32.53046875" width="0.2032" layer="16"/> +<wire x1="5.8436" y1="32.53046875" x2="6.456565625" y2="33.143434375" width="0.2032" layer="16"/> +<wire x1="6.456565625" y1="33.143434375" x2="6.51313125" y2="33.2" width="0.2032" layer="1"/> +<wire x1="6.7971" y1="33.2" x2="6.51313125" y2="33.2" width="0.2032" layer="1"/> +<wire x1="8.8" y1="9.2" x2="8.8" y2="15.5" width="0.2032" layer="1"/> +<wire x1="8.8" y1="15.5" x2="7.9" y2="16.4" width="0.2032" layer="1"/> +<wire x1="7.9" y1="16.4" x2="6.6" y2="16.4" width="0.2032" layer="1"/> +<wire x1="9.4" y1="34.85" x2="8.5892125" y2="34.85" width="0.2032" layer="1"/> +<wire x1="8.5892125" y1="34.85" x2="8.5852125" y2="34.846" width="0.2032" layer="1"/> +<wire x1="8.5852125" y1="34.846" x2="8.4431" y2="34.846" width="0.2032" layer="1"/> +<wire x1="8.4431" y1="34.846" x2="6.7971" y2="33.2" width="0.2032" layer="1"/> </signal> <signal name="ATK0-TXLED"> <contactref element="R7" pad="1"/> -<contactref element="U1" pad="41"/> -<wire x1="41.4" y1="46.35" x2="35.8" y2="46.35" width="0.1524" layer="1"/> -<wire x1="35.8" y1="46.35" x2="34.95" y2="45.5" width="0.1524" layer="1"/> +<contactref element="U1" pad="47"/> +<wire x1="8.95" y1="17.5" x2="8.95" y2="19.15" width="0.2032" layer="1"/> +<wire x1="8.95" y1="19.15" x2="7.6" y2="20.5" width="0.2032" layer="1"/> +<via x="7.6" y="20.5" extent="1-16" drill="0.3"/> +<wire x1="7.6" y1="20.5" x2="6.4" y2="21.7" width="0.2032" layer="16"/> +<wire x1="6.4" y1="21.7" x2="6.4" y2="31.7" width="0.2032" layer="16"/> +<via x="6.4" y="31.7" extent="1-16" drill="0.3"/> +<wire x1="6.4" y1="31.7" x2="6.4" y2="32.3" width="0.2032" layer="1"/> +<wire x1="8.45" y1="34.35" x2="9.4" y2="34.35" width="0.2032" layer="1"/> +<wire x1="6.4" y1="32.3" x2="8.45" y2="34.35" width="0.2032" layer="1"/> </signal> <signal name="ATK0-CLKIN"> -<contactref element="J1" pad="P$1"/> -<contactref element="U1" pad="47"/> -<wire x1="41.4" y1="43.35" x2="40.45" y2="43.35" width="0.1524" layer="1"/> -<wire x1="39.2" y1="42.1" x2="39.2" y2="36.9" width="0.1524" layer="1"/> -<wire x1="39.2" y1="36.9" x2="39.8" y2="36.3" width="0.1524" layer="1"/> -<wire x1="39.8" y1="36.3" x2="39.8" y2="35.1" width="0.1524" layer="1"/> -<wire x1="39.8" y1="35.1" x2="38.88" y2="34.18" width="0.1524" layer="1"/> -<wire x1="38.88" y1="34.18" x2="38.88" y2="33.57" width="0.1524" layer="1"/> -<wire x1="40.45" y1="43.35" x2="39.2" y2="42.1" width="0.1524" layer="1"/> +<contactref element="U3" pad="3"/> +<contactref element="U1" pad="40"/> +<wire x1="13.075" y1="19.65" x2="13.075" y2="21.225" width="0.2032" layer="1"/> +<wire x1="13.075" y1="21.225" x2="11.7" y2="22.6" width="0.2032" layer="1"/> +<via x="11.7" y="22.6" extent="1-16" drill="0.3"/> +<wire x1="11.7" y1="22.6" x2="8.1" y2="26.2" width="0.2032" layer="16"/> +<wire x1="8.1" y1="37.6" x2="8.3" y2="37.8" width="0.2032" layer="16"/> +<via x="8.3" y="37.8" extent="1-16" drill="0.3"/> +<wire x1="8.3" y1="37.8" x2="8.35" y2="37.85" width="0.2032" layer="1"/> +<wire x1="8.35" y1="37.85" x2="9.4" y2="37.85" width="0.2032" layer="1"/> +<wire x1="8.1" y1="26.2" x2="8.1" y2="37.6" width="0.2032" layer="16"/> </signal> <signal name="ATK0-TX"> -<contactref element="J1" pad="P$6"/> -<contactref element="U1" pad="43"/> -<wire x1="41.4" y1="45.35" x2="39.85" y2="45.35" width="0.1524" layer="1"/> -<wire x1="39.85" y1="45.35" x2="39.7" y2="45.2" width="0.1524" layer="1"/> -<wire x1="39.7" y1="45.2" x2="38.2" y2="45.2" width="0.1524" layer="1"/> -<wire x1="38.2" y1="45.2" x2="37.7" y2="45.7" width="0.1524" layer="1"/> -<via x="37.7" y="45.7" extent="1-16" drill="0.3"/> -<wire x1="37.7" y1="45.7" x2="36.9" y2="44.9" width="0.1524" layer="16"/> -<wire x1="36.9" y1="44.9" x2="36.9" y2="44.1" width="0.1524" layer="16"/> -<wire x1="36.9" y1="44.1" x2="38.3" y2="42.7" width="0.1524" layer="16"/> -<wire x1="38.3" y1="42.7" x2="38.3" y2="37.5" width="0.1524" layer="16"/> -<wire x1="38.3" y1="37.5" x2="36.6" y2="35.8" width="0.1524" layer="16"/> -<wire x1="36.6" y1="35.8" x2="36.6" y2="34.5" width="0.1524" layer="16"/> -<wire x1="36.6" y1="34.5" x2="36.9" y2="34.2" width="0.1524" layer="16"/> -<via x="36.9" y="34.2" extent="1-16" drill="0.3"/> -<wire x1="36.9" y1="34.2" x2="36.9" y2="34.1" width="0.1524" layer="1"/> -<wire x1="36.9" y1="34.1" x2="35.5" y2="32.7" width="0.1524" layer="1"/> -<wire x1="35.5" y1="32.7" x2="35.5" y2="30.02" width="0.1524" layer="1"/> -<wire x1="35.5" y1="30.02" x2="37.05" y2="28.47" width="0.1524" layer="1"/> -</signal> -<signal name="ATK0-RX"> -<contactref element="J1" pad="P$3"/> -<contactref element="U1" pad="42"/> -<wire x1="41.4" y1="45.85" x2="39.45" y2="45.85" width="0.1524" layer="1"/> -<wire x1="39.45" y1="45.85" x2="39.4" y2="45.8" width="0.1524" layer="1"/> -<via x="39.4" y="45.8" extent="1-16" drill="0.3"/> -<wire x1="38.88" y1="31.53" x2="40" y2="32.65" width="0.1524" layer="16"/> -<wire x1="40" y1="45.2" x2="39.4" y2="45.8" width="0.1524" layer="16"/> -<wire x1="40" y1="32.65" x2="40" y2="45.2" width="0.1524" layer="16"/> +<contactref element="U3" pad="15"/> +<contactref element="U1" pad="49"/> +<wire x1="10.15" y1="33.1" x2="10.15" y2="31.95" width="0.2032" layer="1"/> +<wire x1="10.15" y1="31.95" x2="10.3" y2="31.8" width="0.2032" layer="1"/> +<via x="10.3" y="31.8" extent="1-16" drill="0.3"/> +<wire x1="10.3" y1="31.8" x2="12.4" y2="29.7" width="0.2032" layer="16"/> +<wire x1="12.4" y1="29.7" x2="12.4" y2="26.9" width="0.2032" layer="16"/> +<via x="12.4" y="26.9" extent="1-16" drill="0.3"/> +<wire x1="12.4" y1="26.9" x2="12.4" y2="25.575" width="0.2032" layer="1"/> +<wire x1="12.4" y1="25.575" x2="12.425" y2="25.55" width="0.2032" layer="1"/> </signal> <signal name="ATK-CLKOUT"> -<contactref element="U1" pad="46"/> -<contactref element="J1" pad="P$8"/> -<wire x1="41.4" y1="43.85" x2="40.51894375" y2="43.85" width="0.1524" layer="1"/> -<wire x1="38.8952" y1="42.22625625" x2="38.8952" y2="38.1" width="0.1524" layer="1"/> -<wire x1="40.51894375" y1="43.85" x2="38.8952" y2="42.22625625" width="0.1524" layer="1"/> -<wire x1="38.8952" y1="38.1" x2="35.7" y2="34.9048" width="0.1524" layer="1"/> -<wire x1="35.7" y1="34.9048" x2="35.7" y2="34.2" width="0.1524" layer="1"/> -<via x="35.7" y="34.2" extent="1-16" drill="0.3"/> -<wire x1="35.7" y1="34.2" x2="35.7" y2="27.78" width="0.1524" layer="16"/> -<wire x1="35.7" y1="27.78" x2="37.05" y2="26.43" width="0.1524" layer="16"/> +<contactref element="U3" pad="9"/> +<contactref element="U1" pad="50"/> +<wire x1="10.65" y1="33.1" x2="10.65" y2="32.35" width="0.2032" layer="1"/> +<wire x1="10.65" y1="32.35" x2="11.2" y2="31.8" width="0.2032" layer="1"/> +<via x="11.2" y="31.8" extent="1-16" drill="0.3"/> +<wire x1="13.3" y1="29.9" x2="16.3" y2="26.9" width="0.2032" layer="16"/> +<via x="16.3" y="26.9" extent="1-16" drill="0.3"/> +<wire x1="16.3" y1="26.9" x2="16.325" y2="26.875" width="0.2032" layer="1"/> +<wire x1="16.325" y1="26.875" x2="16.325" y2="25.55" width="0.2032" layer="1"/> +<wire x1="12.8" y1="29.9" x2="13.3" y2="29.9" width="0.2032" layer="16"/> +<wire x1="11.2" y1="31.5" x2="12.8" y2="29.9" width="0.2032" layer="16"/> +<wire x1="11.2" y1="31.8" x2="11.2" y2="31.5" width="0.2032" layer="16"/> </signal> <signal name="N$27"> <contactref element="J2" pad="1"/> <contactref element="U1" pad="56"/> -<wire x1="45.65" y1="42.1" x2="45.65" y2="41.20434375" width="0.1524" layer="1"/> -<wire x1="45.0166" y1="40.57094375" x2="45.0166" y2="36.86234375" width="0.1524" layer="1"/> -<wire x1="45.65" y1="41.20434375" x2="45.0166" y2="40.57094375" width="0.1524" layer="1"/> -<wire x1="45.0166" y1="36.86234375" x2="45.9952" y2="35.88374375" width="0.1524" layer="1"/> -<wire x1="45.9952" y1="35.88374375" x2="45.9952" y2="35.3" width="0.1524" layer="1"/> -<via x="45.9952" y="35.3" extent="1-16" drill="0.3"/> -<wire x1="45.9952" y1="35.3" x2="51.99" y2="35.3" width="0.1524" layer="16"/> -<wire x1="51.99" y1="35.3" x2="52.04" y2="35.35" width="0.1524" layer="16"/> -<via x="52.04" y="35.35" extent="1-16" drill="0.3"/> +<wire x1="13.65" y1="33.1" x2="13.65" y2="32.6" width="0.1524" layer="1"/> +<wire x1="7.35" y1="24.7167125" x2="7.35" y2="23.96" width="0.1524" layer="1"/> +<wire x1="8.5286" y1="25.8953125" x2="7.35" y2="24.7167125" width="0.1524" layer="1"/> +<wire x1="11.9881125" y1="31.2914" x2="8.5286" y2="27.8318875" width="0.1524" layer="1"/> +<wire x1="8.5286" y1="27.8318875" x2="8.5286" y2="25.8953125" width="0.1524" layer="1"/> +<wire x1="11.9881125" y1="31.2914" x2="12.7946875" y2="31.2914" width="0.1524" layer="1"/> +<wire x1="12.7946875" y1="31.2914" x2="12.9286" y2="31.4253125" width="0.1524" layer="1"/> +<wire x1="12.9286" y1="31.4253125" x2="12.9286" y2="31.8286" width="0.1524" layer="1"/> +<wire x1="13.65" y1="32.55" x2="13.65" y2="32.6" width="0.1524" layer="1"/> +<wire x1="12.9286" y1="31.8286" x2="13.65" y2="32.55" width="0.1524" layer="1"/> </signal> <signal name="N$28"> <contactref element="J2" pad="5"/> <contactref element="U1" pad="57"/> <contactref element="S1" pad="P$4"/> -<wire x1="46.15" y1="41.2732875" x2="46.15" y2="42.1" width="0.1524" layer="1"/> -<wire x1="45.3214" y1="40.4446875" x2="46.15" y2="41.2732875" width="0.1524" layer="1"/> -<wire x1="45.3214" y1="36.9886" x2="45.3214" y2="40.4446875" width="0.1524" layer="1"/> -<wire x1="46.96" y1="35.35" x2="45.3214" y2="36.9886" width="0.1524" layer="1"/> -<wire x1="46.96" y1="35.35" x2="46.96" y2="31.4332875" width="0.1524" layer="1"/> -<wire x1="41.85" y1="16.1" x2="46.2214" y2="20.4714" width="0.1524" layer="1"/> -<via x="46.2214" y="20.4714" extent="1-16" drill="0.3"/> -<wire x1="45.9952" y1="30.4684875" x2="45.9952" y2="30" width="0.1524" layer="1"/> -<via x="45.9952" y="30" extent="1-16" drill="0.3"/> -<wire x1="45.9952" y1="30" x2="46.2214" y2="29.7738" width="0.1524" layer="16"/> -<wire x1="46.2214" y1="29.7738" x2="46.2214" y2="20.4714" width="0.1524" layer="16"/> -<wire x1="46.96" y1="31.4332875" x2="45.9952" y2="30.4684875" width="0.1524" layer="1"/> +<wire x1="14.15" y1="33.1" x2="14.0161" y2="32.9661" width="0.1524" layer="1"/> +<wire x1="14.0161" y1="32.9661" x2="14.0161" y2="32.48504375" width="0.1524" layer="1"/> +<wire x1="14.0161" y1="32.48504375" x2="13.2334" y2="31.70234375" width="0.1524" layer="1"/> +<wire x1="13.2334" y1="31.29905625" x2="12.9286" y2="30.99425625" width="0.1524" layer="1"/> +<wire x1="13.2334" y1="31.70234375" x2="13.2334" y2="31.29905625" width="0.1524" layer="1"/> +<wire x1="12.9286" y1="29.8253125" x2="12.7946875" y2="29.6914" width="0.1524" layer="1"/> +<wire x1="12.7946875" y1="29.6914" x2="12.42" y2="29.6914" width="0.1524" layer="1"/> +<wire x1="12.42" y1="29.6914" x2="11.1286" y2="28.4" width="0.1524" layer="1"/> +<wire x1="12.9286" y1="30.99425625" x2="12.9286" y2="29.8253125" width="0.1524" layer="1"/> +<wire x1="9.6334" y1="28.4" x2="8.8334" y2="27.6" width="0.1524" layer="1"/> +<wire x1="11.1286" y1="28.4" x2="9.6334" y2="28.4" width="0.1524" layer="1"/> +<wire x1="8.8334" y1="27.6" x2="8.8334" y2="25.76905625" width="0.1524" layer="1"/> +<wire x1="8.8334" y1="25.76905625" x2="8.5286" y2="25.46425625" width="0.1524" layer="1"/> +<wire x1="8.5286" y1="23.3553125" x2="8.3946875" y2="23.2214" width="0.1524" layer="1"/> +<wire x1="6.3053125" y1="23.2214" x2="8.3946875" y2="23.2214" width="0.1524" layer="1"/> +<wire x1="7.35" y1="28.2832875" x2="7.35" y2="29.04" width="0.1524" layer="1"/> +<wire x1="6.1714" y1="27.1046875" x2="7.35" y2="28.2832875" width="0.1524" layer="1"/> +<wire x1="6.1714" y1="27.1046875" x2="6.1714" y2="23.3553125" width="0.1524" layer="1"/> +<wire x1="8.5286" y1="25.46425625" x2="8.5286" y2="23.3553125" width="0.1524" layer="1"/> +<wire x1="3.6" y1="12.65" x2="3.6" y2="20.7839125" width="0.2032" layer="1"/> +<wire x1="6.1714" y1="23.3553125" x2="6.3053125" y2="23.2214" width="0.1524" layer="1"/> +<wire x1="3.6" y1="20.7839125" x2="6.146" y2="23.3299125" width="0.2032" layer="1"/> +<wire x1="6.146" y1="23.3299125" x2="6.146" y2="23.3553125" width="0.2032" layer="1"/> +<wire x1="6.146" y1="23.3553125" x2="6.1714" y2="23.3553125" width="0" layer="19" extent="1-1"/> </signal> <signal name="DRV_EN"> -<contactref element="S3" pad="P$1"/> -<contactref element="S3" pad="P$4"/> -<wire x1="56.5048" y1="56.4048" x2="58.048" y2="57.948" width="0.1524" layer="16"/> -<wire x1="56.5048" y1="56.4048" x2="55.47374375" y2="56.4048" width="0.1524" layer="16"/> -<via x="44.1428" y="52.3" extent="1-16" drill="0.3"/> +<via x="12.1428" y="43.3" extent="1-16" drill="0.3"/> <contactref element="U1" pad="27"/> -<wire x1="44.65" y1="51.1" x2="44.65" y2="51.59905" width="0.1524" layer="1"/> -<wire x1="44.65" y1="51.59905" x2="44.369" y2="51.88005" width="0.1524" layer="1"/> -<wire x1="44.369" y1="51.88005" x2="44.369" y2="52.0738" width="0.1524" layer="1"/> -<wire x1="44.369" y1="52.0738" x2="44.1428" y2="52.3" width="0.1524" layer="1"/> -<wire x1="55.47374375" y1="56.4048" x2="53.17374375" y2="54.1048" width="0.1524" layer="16"/> -<wire x1="53.17374375" y1="54.1048" x2="46.47374375" y2="54.1048" width="0.1524" layer="16"/> -<wire x1="44.99994375" y1="52.631" x2="44.68005" y2="52.631" width="0.1524" layer="16"/> -<wire x1="44.34905" y1="52.3" x2="44.1428" y2="52.3" width="0.1524" layer="16"/> -<wire x1="44.68005" y1="52.631" x2="44.34905" y2="52.3" width="0.1524" layer="16"/> -<wire x1="46.47374375" y1="54.1048" x2="44.99994375" y2="52.631" width="0.1524" layer="16"/> -<wire x1="64.16" y1="60.748" x2="64.16" y2="57.948" width="0.1524" layer="1"/> -<via x="64" y="58" extent="1-16" drill="0.3"/> -<wire x1="58.048" y1="57.948" x2="63.948" y2="57.948" width="0.1524" layer="16"/> -<wire x1="63.948" y1="57.948" x2="64" y2="58" width="0.1524" layer="16"/> -<wire x1="64" y1="58" x2="64.16" y2="57.948" width="0" layer="19" extent="1-1"/> +<wire x1="12.65" y1="42.1" x2="12.65" y2="42.59905" width="0.1524" layer="1"/> +<wire x1="12.65" y1="42.59905" x2="12.369" y2="42.88005" width="0.1524" layer="1"/> +<wire x1="12.369" y1="42.88005" x2="12.369" y2="43.0738" width="0.1524" layer="1"/> +<wire x1="12.369" y1="43.0738" x2="12.1428" y2="43.3" width="0.1524" layer="1"/> +<wire x1="18.07374375" y1="46.0048" x2="22.07374375" y2="46.0048" width="0.1524" layer="16"/> +<wire x1="15.69994375" y1="43.631" x2="12.68005" y2="43.631" width="0.1524" layer="16"/> +<wire x1="12.34905" y1="43.3" x2="12.1428" y2="43.3" width="0.1524" layer="16"/> +<wire x1="12.68005" y1="43.631" x2="12.34905" y2="43.3" width="0.1524" layer="16"/> +<wire x1="18.07374375" y1="46.0048" x2="15.69994375" y2="43.631" width="0.1524" layer="16"/> +<contactref element="S3" pad="P$3"/> +<contactref element="S3" pad="P$6"/> +<wire x1="22.9316" y1="48.78396875" x2="23.61603125" y2="49.4684" width="0.1524" layer="16"/> +<wire x1="22.07374375" y1="46.0048" x2="22.9316" y2="46.86265625" width="0.1524" layer="16"/> +<wire x1="22.9316" y1="46.86265625" x2="22.9316" y2="48.78396875" width="0.1524" layer="16"/> +<wire x1="23.61603125" y1="49.4684" x2="24.58396875" y2="49.4684" width="0.1524" layer="16"/> +<via x="40" y="50.1" extent="1-16" drill="0.3"/> +<wire x1="40" y1="52.9" x2="40" y2="50.1" width="0.2032" layer="1"/> +<wire x1="28.52925" y1="48.1302" x2="29.63005" y2="49.231" width="0.1524" layer="16"/> +<wire x1="29.63005" y1="49.231" x2="31.714025" y2="49.231" width="0.1524" layer="16"/> +<wire x1="25.92216875" y1="48.1302" x2="28.52925" y2="48.1302" width="0.1524" layer="16"/> +<wire x1="24.58396875" y1="49.4684" x2="25.92216875" y2="48.1302" width="0.1524" layer="16"/> +<wire x1="31.714025" y1="49.231" x2="34.113225" y2="51.6302" width="0.1524" layer="16"/> +<wire x1="38.4698" y1="51.6302" x2="40" y2="50.1" width="0.1524" layer="16"/> +<wire x1="34.113225" y1="51.6302" x2="38.4698" y2="51.6302" width="0.1524" layer="16"/> </signal> <signal name="DRV_EN_DRV"> <contactref element="S3" pad="P$2"/> <contactref element="S3" pad="P$5"/> -<wire x1="61.66" y1="57.948" x2="61.66" y2="60.748" width="0.1524" layer="1"/> <contactref element="U2" pad="P$16"/> -<wire x1="66.000009375" y1="46" x2="64.5232875" y2="46" width="0.1524" layer="1"/> -<wire x1="64.5232875" y1="46" x2="64.1946875" y2="45.6714" width="0.1524" layer="1"/> -<wire x1="61.4053125" y1="45.6714" x2="61.2" y2="45.8767125" width="0.1524" layer="1"/> -<wire x1="64.1946875" y1="45.6714" x2="61.4053125" y2="45.6714" width="0.1524" layer="1"/> -<wire x1="61.2" y1="45.8767125" x2="61.2" y2="57.488" width="0.1524" layer="1"/> -<wire x1="61.2" y1="57.488" x2="61.66" y2="57.948" width="0" layer="19" extent="1-1"/> +<wire x1="34.000009375" y1="37" x2="32.5232875" y2="37" width="0.1524" layer="1"/> +<wire x1="32.5232875" y1="37" x2="32.1946875" y2="36.6714" width="0.1524" layer="1"/> +<wire x1="29.4053125" y1="36.6714" x2="29.2" y2="36.8767125" width="0.1524" layer="1"/> +<wire x1="32.1946875" y1="36.6714" x2="29.4053125" y2="36.6714" width="0.1524" layer="1"/> +<contactref element="R3" pad="2"/> +<wire x1="29.2" y1="46.25" x2="29.85" y2="46.9" width="0.1524" layer="1"/> +<wire x1="28.9914" y1="38.6053125" x2="28.9914" y2="39.5946875" width="0.1524" layer="1"/> +<wire x1="29.2" y1="36.8767125" x2="29.2" y2="38.3967125" width="0.1524" layer="1"/> +<wire x1="29.2" y1="39.8032875" x2="29.2" y2="46.25" width="0.1524" layer="1"/> +<wire x1="29.2" y1="38.3967125" x2="28.9914" y2="38.6053125" width="0.1524" layer="1"/> +<wire x1="28.9914" y1="39.5946875" x2="29.2" y2="39.8032875" width="0.1524" layer="1"/> +<via x="29.85" y="46.9" extent="1-16" drill="0.3"/> +<wire x1="29.85" y1="46.9" x2="34.25" y2="51.3" width="0.2032" layer="16"/> +<wire x1="34.25" y1="51.3" x2="36.4" y2="51.3" width="0.2032" layer="16"/> +<wire x1="36.4" y1="51.3" x2="37.5" y2="50.2" width="0.2032" layer="16"/> +<wire x1="37.5" y1="50.2" x2="37.5" y2="50.1" width="0.2032" layer="16"/> +<via x="37.5" y="50.1" extent="1-16" drill="0.3"/> +<wire x1="37.5" y1="52.9" x2="37.5" y2="50.1" width="0.2032" layer="1"/> </signal> <signal name="PWMHIU"> <contactref element="U2" pad="P$17"/> <contactref element="U1" pad="21"/> <contactref element="J13" pad="2"/> -<wire x1="64.32094375" y1="45.3666" x2="64.45434375" y2="45.5" width="0.1524" layer="1"/> -<wire x1="61.27905625" y1="45.3666" x2="58.9" y2="47.74565625" width="0.1524" layer="1"/> -<wire x1="64.32094375" y1="45.3666" x2="61.27905625" y2="45.3666" width="0.1524" layer="1"/> -<wire x1="58.9" y1="47.74565625" x2="58.9" y2="50.9" width="0.1524" layer="1"/> -<wire x1="58.9" y1="50.9" x2="57.54" y2="52.26" width="0.1524" layer="1"/> -<wire x1="57.54" y1="52.26" x2="56.1" y2="52.26" width="0.1524" layer="1"/> -<wire x1="47.8714" y1="51.8714" x2="47.7" y2="51.7" width="0.1524" layer="1"/> -<wire x1="47.8714" y1="51.8714" x2="47.94034375" y2="51.8714" width="0.1524" layer="1"/> -<wire x1="47.94034375" y1="51.8714" x2="48.77374375" y2="52.7048" width="0.1524" layer="1"/> -<wire x1="53.67105625" y1="52.26" x2="56.1" y2="52.26" width="0.1524" layer="1"/> -<wire x1="53.22625625" y1="52.7048" x2="53.67105625" y2="52.26" width="0.1524" layer="1"/> -<wire x1="48.77374375" y1="52.7048" x2="53.22625625" y2="52.7048" width="0.1524" layer="1"/> -<wire x1="47.7" y1="51.7" x2="47.7" y2="51.15" width="0.1524" layer="1"/> -<wire x1="47.7" y1="51.15" x2="47.675" y2="51.125" width="0.1524" layer="1"/> -<wire x1="64.45434375" y1="45.5" x2="66.000009375" y2="45.5" width="0.1524" layer="1"/> -<wire x1="47.675" y1="51.125" x2="47.65" y2="51.1" width="0" layer="19" extent="1-1"/> +<wire x1="32.32094375" y1="36.3666" x2="32.45434375" y2="36.5" width="0.1524" layer="1"/> +<wire x1="32.32094375" y1="36.3666" x2="29.27905625" y2="36.3666" width="0.1524" layer="1"/> +<wire x1="15.8714" y1="42.8714" x2="15.7" y2="42.7" width="0.1524" layer="1"/> +<wire x1="15.8714" y1="42.8714" x2="15.94034375" y2="42.8714" width="0.1524" layer="1"/> +<wire x1="15.94034375" y1="42.8714" x2="16.77374375" y2="43.7048" width="0.1524" layer="1"/> +<wire x1="21.67105625" y1="43.26" x2="24.1" y2="43.26" width="0.1524" layer="1"/> +<wire x1="21.22625625" y1="43.7048" x2="21.67105625" y2="43.26" width="0.1524" layer="1"/> +<wire x1="16.77374375" y1="43.7048" x2="21.22625625" y2="43.7048" width="0.1524" layer="1"/> +<wire x1="15.7" y1="42.7" x2="15.7" y2="42.15" width="0.1524" layer="1"/> +<wire x1="15.7" y1="42.15" x2="15.675" y2="42.125" width="0.1524" layer="1"/> +<wire x1="32.45434375" y1="36.5" x2="34.000009375" y2="36.5" width="0.1524" layer="1"/> +<wire x1="25.6048" y1="40.04085625" x2="25.6048" y2="41.42625625" width="0.1524" layer="1"/> +<wire x1="24.1" y1="42.93105625" x2="24.1" y2="43.26" width="0.1524" layer="1"/> +<wire x1="25.6048" y1="41.42625625" x2="24.1" y2="42.93105625" width="0.1524" layer="1"/> +<wire x1="29.27905625" y1="36.3666" x2="25.6048" y2="40.04085625" width="0.1524" layer="1"/> +<wire x1="15.675" y1="42.125" x2="15.65" y2="42.1" width="0" layer="19" extent="1-1"/> </signal> <signal name="PWMLOU"> <contactref element="U2" pad="P$18"/> <contactref element="U1" pad="20"/> -<wire x1="64.3382" y1="45.0618" x2="64.399996875" y2="45.000003125" width="0.1524" layer="1"/> -<wire x1="64.3382" y1="45.0618" x2="61.1528" y2="45.0618" width="0.1524" layer="1"/> -<wire x1="58.5952" y1="47.6194" x2="58.5952" y2="50.3" width="0.1524" layer="1"/> -<wire x1="61.1528" y1="45.0618" x2="58.5952" y2="47.6194" width="0.1524" layer="1"/> -<wire x1="58.5952" y1="50.3" x2="57.8952" y2="51" width="0.1524" layer="1"/> -<wire x1="57.8952" y1="51" x2="54.5" y2="51" width="0.1524" layer="1"/> -<wire x1="54.5" y1="51" x2="53.1" y2="52.4" width="0.1524" layer="1"/> -<wire x1="53.1" y1="52.4" x2="48.9" y2="52.4" width="0.1524" layer="1"/> -<wire x1="48.9" y1="52.4" x2="48.15" y2="51.65" width="0.1524" layer="1"/> -<wire x1="48.15" y1="51.65" x2="48.15" y2="51.1" width="0.1524" layer="1"/> -<wire x1="64.399996875" y1="45.000003125" x2="66.000009375" y2="45.000003125" width="0.1524" layer="1"/> +<wire x1="32.3382" y1="36.0618" x2="32.399996875" y2="36.000003125" width="0.1524" layer="1"/> +<wire x1="29.1528" y1="36.0618" x2="32.3382" y2="36.0618" width="0.1524" layer="1"/> +<wire x1="16.9" y1="43.4" x2="21.1" y2="43.4" width="0.1524" layer="1"/> +<wire x1="16.9" y1="43.4" x2="16.15" y2="42.65" width="0.1524" layer="1"/> +<wire x1="16.15" y1="42.65" x2="16.15" y2="42.1" width="0.1524" layer="1"/> +<wire x1="32.399996875" y1="36.000003125" x2="34.000009375" y2="36.000003125" width="0.1524" layer="1"/> +<wire x1="24.7" y1="41.9" x2="25.3" y2="41.3" width="0.1524" layer="1"/> +<wire x1="25.3" y1="41.3" x2="25.3" y2="39.9146" width="0.1524" layer="1"/> +<wire x1="21.1" y1="43.4" x2="22.6" y2="41.9" width="0.1524" layer="1"/> +<wire x1="22.6" y1="41.9" x2="24.7" y2="41.9" width="0.1524" layer="1"/> +<wire x1="25.3" y1="39.9146" x2="29.1528" y2="36.0618" width="0.1524" layer="1"/> </signal> <signal name="PWMHIV"> <contactref element="J13" pad="3"/> <contactref element="U1" pad="19"/> -<wire x1="55.34894375" y1="49.72" x2="52.97374375" y2="52.0952" width="0.1524" layer="1"/> -<wire x1="52.97374375" y1="52.0952" x2="49.02625625" y2="52.0952" width="0.1524" layer="1"/> -<wire x1="48.65" y1="51.71894375" x2="48.65" y2="51.1" width="0.1524" layer="1"/> -<wire x1="49.02625625" y1="52.0952" x2="48.65" y2="51.71894375" width="0.1524" layer="1"/> +<wire x1="23.34894375" y1="40.72" x2="20.97374375" y2="43.0952" width="0.1524" layer="1"/> +<wire x1="20.97374375" y1="43.0952" x2="17.02625625" y2="43.0952" width="0.1524" layer="1"/> +<wire x1="16.65" y1="42.71894375" x2="16.65" y2="42.1" width="0.1524" layer="1"/> +<wire x1="17.02625625" y1="43.0952" x2="16.65" y2="42.71894375" width="0.1524" layer="1"/> <contactref element="U2" pad="P$19"/> -<wire x1="66.000009375" y1="44.500003125" x2="64.468940625" y2="44.500003125" width="0.1524" layer="1"/> -<wire x1="64.468940625" y1="44.500003125" x2="64.21194375" y2="44.757" width="0.1524" layer="1"/> -<wire x1="58.2904" y1="49.1096" x2="57.7" y2="49.7" width="0.1524" layer="1"/> -<wire x1="58.2904" y1="47.49314375" x2="58.2904" y2="49.1096" width="0.1524" layer="1"/> -<wire x1="61.02654375" y1="44.757" x2="58.2904" y2="47.49314375" width="0.1524" layer="1"/> -<wire x1="57.7" y1="49.7" x2="56.12" y2="49.7" width="0.1524" layer="1"/> -<wire x1="64.21194375" y1="44.757" x2="61.02654375" y2="44.757" width="0.1524" layer="1"/> -<wire x1="56.12" y1="49.7" x2="56.1" y2="49.72" width="0" layer="19" extent="1-1"/> -<wire x1="55.34894375" y1="49.72" x2="56.1" y2="49.72" width="0" layer="19" extent="1-1"/> +<wire x1="34.000009375" y1="35.500003125" x2="32.468940625" y2="35.500003125" width="0.1524" layer="1"/> +<wire x1="32.468940625" y1="35.500003125" x2="32.21194375" y2="35.757" width="0.1524" layer="1"/> +<wire x1="29.02654375" y1="35.757" x2="26.2904" y2="38.49314375" width="0.1524" layer="1"/> +<wire x1="32.21194375" y1="35.757" x2="29.02654375" y2="35.757" width="0.1524" layer="1"/> +<wire x1="26.2904" y1="38.49314375" x2="26.2904" y2="38.49315625" width="0.1524" layer="1"/> +<wire x1="24.1" y1="40.68355625" x2="26.2904" y2="38.49315625" width="0.1524" layer="1"/> +<wire x1="24.1" y1="40.72" x2="24.1" y2="40.68355625" width="0.1524" layer="1"/> +<wire x1="24.1" y1="40.72" x2="23.34894375" y2="40.72" width="0.1524" layer="1"/> </signal> <signal name="PWMHIW"> <contactref element="J13" pad="4"/> <contactref element="U1" pad="17"/> -<wire x1="49.65" y1="51.1" x2="50.0356" y2="51.4856" width="0.1524" layer="1"/> -<wire x1="52.7144" y1="51.4856" x2="54.3952" y2="49.8048" width="0.1524" layer="1"/> -<wire x1="54.3952" y1="49.8048" x2="54.3952" y2="49.17374375" width="0.1524" layer="1"/> -<wire x1="50.0356" y1="51.4856" x2="52.7144" y2="51.4856" width="0.1524" layer="1"/> -<wire x1="56.1" y1="47.46894375" x2="54.3952" y2="49.17374375" width="0.1524" layer="1"/> +<wire x1="17.65" y1="42.1" x2="18.0356" y2="42.4856" width="0.1524" layer="1"/> +<wire x1="20.7144" y1="42.4856" x2="22.3952" y2="40.8048" width="0.1524" layer="1"/> +<wire x1="22.3952" y1="40.8048" x2="22.3952" y2="40.17374375" width="0.1524" layer="1"/> +<wire x1="18.0356" y1="42.4856" x2="20.7144" y2="42.4856" width="0.1524" layer="1"/> +<wire x1="24.1" y1="38.46894375" x2="22.3952" y2="40.17374375" width="0.1524" layer="1"/> <contactref element="U2" pad="P$21"/> -<wire x1="66.000009375" y1="43.50000625" x2="64.59999375" y2="43.50000625" width="0.1524" layer="1"/> -<wire x1="64.59999375" y1="43.50000625" x2="63.9526" y2="44.1474" width="0.1524" layer="1"/> -<wire x1="60.77403125" y1="44.1474" x2="57.760715625" y2="47.160715625" width="0.1524" layer="1"/> -<wire x1="57.760715625" y1="47.160715625" x2="57.74143125" y2="47.18" width="0.1524" layer="1"/> -<wire x1="63.9526" y1="44.1474" x2="60.77403125" y2="44.1474" width="0.1524" layer="1"/> -<wire x1="57.760715625" y1="47.160715625" x2="56.119284375" y2="47.160715625" width="0.1524" layer="1"/> -<wire x1="56.119284375" y1="47.160715625" x2="56.1" y2="47.18" width="0.1524" layer="1"/> -<wire x1="56.1" y1="47.18" x2="56.1" y2="47.46894375" width="0.1524" layer="1"/> +<wire x1="34.000009375" y1="34.50000625" x2="32.59999375" y2="34.50000625" width="0.1524" layer="1"/> +<wire x1="32.59999375" y1="34.50000625" x2="31.9526" y2="35.1474" width="0.1524" layer="1"/> +<wire x1="28.77403125" y1="35.1474" x2="25.760715625" y2="38.160715625" width="0.1524" layer="1"/> +<wire x1="31.9526" y1="35.1474" x2="28.77403125" y2="35.1474" width="0.1524" layer="1"/> +<wire x1="25.760715625" y1="38.160715625" x2="24.119284375" y2="38.160715625" width="0.1524" layer="1"/> +<wire x1="24.119284375" y1="38.160715625" x2="24.1" y2="38.18" width="0.1524" layer="1"/> +<wire x1="24.1" y1="38.18" x2="24.1" y2="38.46894375" width="0.1524" layer="1"/> </signal> <signal name="PWMLOV"> <contactref element="U1" pad="18"/> <contactref element="U2" pad="P$20"/> -<wire x1="66.000009375" y1="44.000003125" x2="64.537884375" y2="44.000003125" width="0.1524" layer="1"/> -<wire x1="64.537884375" y1="44.000003125" x2="64.0856875" y2="44.4522" width="0.1524" layer="1"/> -<wire x1="64.0856875" y1="44.4522" x2="60.9002875" y2="44.4522" width="0.1524" layer="1"/> -<wire x1="57.9856" y1="47.3668875" x2="57.9856" y2="47.9144" width="0.1524" layer="1"/> -<wire x1="60.9002875" y1="44.4522" x2="57.9856" y2="47.3668875" width="0.1524" layer="1"/> -<wire x1="57.4" y1="48.5" x2="55.5" y2="48.5" width="0.1524" layer="1"/> -<wire x1="55.5" y1="48.5" x2="54.7" y2="49.3" width="0.1524" layer="1"/> -<wire x1="57.9856" y1="47.9144" x2="57.4" y2="48.5" width="0.1524" layer="1"/> -<wire x1="54.7" y1="49.3" x2="54.7" y2="49.9378875" width="0.1524" layer="1"/> -<wire x1="54.7" y1="49.9378875" x2="52.8474875" y2="51.7904" width="0.1524" layer="1"/> -<wire x1="52.8474875" y1="51.7904" x2="49.3904" y2="51.7904" width="0.1524" layer="1"/> -<wire x1="49.3904" y1="51.7904" x2="49.15" y2="51.55" width="0.1524" layer="1"/> -<wire x1="49.15" y1="51.55" x2="49.15" y2="51.1" width="0.1524" layer="1"/> +<wire x1="34.000009375" y1="35.000003125" x2="32.537884375" y2="35.000003125" width="0.1524" layer="1"/> +<wire x1="32.537884375" y1="35.000003125" x2="32.0856875" y2="35.4522" width="0.1524" layer="1"/> +<wire x1="32.0856875" y1="35.4522" x2="28.9002875" y2="35.4522" width="0.1524" layer="1"/> +<wire x1="28.9002875" y1="35.4522" x2="25.9856" y2="38.3668875" width="0.1524" layer="1"/> +<wire x1="22.7" y1="40.9378875" x2="22.7" y2="40.3" width="0.1524" layer="1"/> +<wire x1="22.7" y1="40.9378875" x2="20.8474875" y2="42.7904" width="0.1524" layer="1"/> +<wire x1="20.8474875" y1="42.7904" x2="17.3904" y2="42.7904" width="0.1524" layer="1"/> +<wire x1="17.3904" y1="42.7904" x2="17.15" y2="42.55" width="0.1524" layer="1"/> +<wire x1="17.15" y1="42.55" x2="17.15" y2="42.1" width="0.1524" layer="1"/> +<wire x1="23.6516" y1="39.3484" x2="25.0041" y2="39.3484" width="0.1524" layer="1"/> +<wire x1="25.0041" y1="39.3484" x2="25.9856" y2="38.3669" width="0.1524" layer="1"/> +<wire x1="22.7" y1="40.3" x2="23.6516" y2="39.3484" width="0.1524" layer="1"/> +<wire x1="25.9856" y1="38.3669" x2="25.9856" y2="38.3668875" width="0" layer="19" extent="1-1"/> </signal> <signal name="PWMLOW"> <contactref element="U1" pad="16"/> <contactref element="U2" pad="P$22"/> -<wire x1="52.58814375" y1="51.1808" x2="51.2308" y2="51.1808" width="0.1524" layer="1"/> -<wire x1="52.58814375" y1="51.1808" x2="54.0904" y2="49.67854375" width="0.1524" layer="1"/> -<wire x1="54.0904" y1="49.67854375" x2="54.0904" y2="49.0474875" width="0.1524" layer="1"/> -<wire x1="54.8" y1="48.3378875" x2="54.8" y2="46.8" width="0.1524" layer="1"/> -<wire x1="54.8" y1="46.8" x2="55.7" y2="45.9" width="0.1524" layer="1"/> -<wire x1="55.7" y1="45.9" x2="58.590375" y2="45.9" width="0.1524" layer="1"/> -<wire x1="58.590375" y1="45.9" x2="60.647775" y2="43.8426" width="0.1524" layer="1"/> -<wire x1="60.647775" y1="43.8426" x2="63.82634375" y2="43.8426" width="0.1524" layer="1"/> -<wire x1="64.6689375" y1="43.00000625" x2="66.000009375" y2="43.00000625" width="0.1524" layer="1"/> -<wire x1="54.0904" y1="49.0474875" x2="54.8" y2="48.3378875" width="0.1524" layer="1"/> -<wire x1="63.82634375" y1="43.8426" x2="64.6689375" y2="43.00000625" width="0.1524" layer="1"/> -<wire x1="51.2308" y1="51.1808" x2="50.4" y2="50.35" width="0.1524" layer="1"/> +<wire x1="20.58814375" y1="42.1808" x2="19.2308" y2="42.1808" width="0.1524" layer="1"/> +<wire x1="20.58814375" y1="42.1808" x2="22.0904" y2="40.67854375" width="0.1524" layer="1"/> +<wire x1="22.0904" y1="40.67854375" x2="22.0904" y2="40.0474875" width="0.1524" layer="1"/> +<wire x1="27.9451875" y1="35.5451875" x2="28.647775" y2="34.8426" width="0.1524" layer="1"/> +<wire x1="28.647775" y1="34.8426" x2="31.82634375" y2="34.8426" width="0.1524" layer="1"/> +<wire x1="32.6689375" y1="34.00000625" x2="34.000009375" y2="34.00000625" width="0.1524" layer="1"/> +<wire x1="22.0904" y1="40.0474875" x2="22.8" y2="39.3378875" width="0.1524" layer="1"/> +<wire x1="31.82634375" y1="34.8426" x2="32.6689375" y2="34.00000625" width="0.1524" layer="1"/> +<wire x1="19.2308" y1="42.1808" x2="18.4" y2="41.35" width="0.1524" layer="1"/> +<contactref element="J3" pad="1"/> +<wire x1="22.8" y1="36.9" x2="24.1" y2="35.6" width="0.1524" layer="1"/> +<wire x1="22.8" y1="39.3378875" x2="22.8" y2="36.9" width="0.1524" layer="1"/> +<wire x1="24.1" y1="35.6" x2="27.890375" y2="35.6" width="0.1524" layer="1"/> +<wire x1="27.890375" y1="35.6" x2="27.9451875" y2="35.5451875" width="0.1524" layer="1"/> +</signal> +<signal name="N$1"> +<contactref element="U3" pad="2"/> +<contactref element="R1" pad="2"/> +<contactref element="J1" pad="P$8"/> +<wire x1="12.45" y1="17.5" x2="12.45" y2="16.65" width="0.2032" layer="1"/> +<wire x1="12.45" y1="16.65" x2="11.2361" y2="15.4361" width="0.2032" layer="1"/> +<wire x1="10.944" y1="11.12991875" x2="10.944" y2="10.278" width="0.2032" layer="1"/> +<wire x1="11.2361" y1="11.42201875" x2="10.944" y2="11.12991875" width="0.2032" layer="1"/> +<wire x1="11.2361" y1="15.4361" x2="11.2361" y2="11.42201875" width="0.2032" layer="1"/> +<wire x1="12.45" y1="17.5" x2="12.45" y2="19.625" width="0.2032" layer="1"/> +<wire x1="12.45" y1="19.625" x2="12.425" y2="19.65" width="0.2032" layer="1"/> +</signal> +<signal name="N$22"> +<contactref element="J1" pad="P$7"/> +<contactref element="R1" pad="1"/> +<contactref element="U3" pad="1"/> +<wire x1="10.55" y1="17.5" x2="10.55" y2="15.82904375" width="0.2032" layer="1"/> +<wire x1="10.55" y1="15.82904375" x2="10.8805" y2="15.49854375" width="0.2032" layer="1"/> +<wire x1="9.986" y1="10.67481875" x2="9.986" y2="9.88118125" width="0.2032" layer="1"/> +<wire x1="9.986" y1="9.88118125" x2="10.54718125" y2="9.32" width="0.2032" layer="1"/> +<wire x1="10.54718125" y1="9.32" x2="11.14" y2="9.32" width="0.2032" layer="1"/> +<wire x1="11.14" y1="9.32" x2="11.96" y2="8.5" width="0.2032" layer="1"/> +<wire x1="10.8805" y1="15.49854375" x2="10.8805" y2="11.56931875" width="0.2032" layer="1"/> +<wire x1="10.8805" y1="11.56931875" x2="9.986" y2="10.67481875" width="0.2032" layer="1"/> +<wire x1="10.55" y1="17.5" x2="11.775" y2="18.725" width="0.2032" layer="1"/> +<wire x1="11.775" y1="18.725" x2="11.775" y2="19.65" width="0.2032" layer="1"/> +</signal> +<signal name="N$29"> +<contactref element="U3" pad="14"/> +<contactref element="J1" pad="P$6"/> +<wire x1="13.075" y1="25.55" x2="13.075" y2="23.175" width="0.2032" layer="1"/> +<wire x1="13.075" y1="23.175" x2="13" y2="23.1" width="0.2032" layer="1"/> +<via x="13" y="23.1" extent="1-16" drill="0.3"/> +<wire x1="13" y1="23.1" x2="13" y2="10.302" width="0.2032" layer="16"/> +<wire x1="13" y1="10.302" x2="12.976" y2="10.278" width="0.2032" layer="16"/> +</signal> +<signal name="N$30"> +<contactref element="J1" pad="P$5"/> +<contactref element="U3" pad="13"/> +<wire x1="13.725" y1="25.55" x2="13.725" y2="23.7936" width="0.2032" layer="1"/> +<wire x1="13.725" y1="23.7936" x2="13.6314" y2="23.7" width="0.2032" layer="1"/> +<via x="13.6314" y="23.7" extent="1-16" drill="0.3"/> +<wire x1="13.5564" y1="22.86953125" x2="13.3556" y2="22.66873125" width="0.2032" layer="16"/> +<wire x1="13.6314" y1="23.7" x2="13.5564" y2="23.625" width="0.2032" layer="16"/> +<wire x1="13.5564" y1="23.625" x2="13.5564" y2="22.86953125" width="0.2032" layer="16"/> +<wire x1="13.3556" y1="11.25321875" x2="13.934" y2="10.67481875" width="0.2032" layer="16"/> +<wire x1="13.3556" y1="22.66873125" x2="13.3556" y2="11.25321875" width="0.2032" layer="16"/> +<wire x1="13.934" y1="8.558" x2="13.992" y2="8.5" width="0.2032" layer="16"/> +<wire x1="13.934" y1="10.67481875" x2="13.934" y2="8.558" width="0.2032" layer="16"/> +</signal> +<signal name="N$31"> +<contactref element="U3" pad="7"/> +<contactref element="R13" pad="2"/> +<contactref element="J1" pad="P$4"/> +<wire x1="15.675" y1="19.65" x2="15.7" y2="19.625" width="0.2032" layer="1"/> +<wire x1="15.7" y1="18.25" x2="16.45" y2="17.5" width="0.2032" layer="1"/> +<wire x1="15.7" y1="19.625" x2="15.7" y2="18.25" width="0.2032" layer="1"/> +<wire x1="16.45" y1="17.5" x2="14.9056" y2="15.9556" width="0.2032" layer="1"/> +<wire x1="14.9056" y1="10.3804" x2="15.008" y2="10.278" width="0.2032" layer="1"/> +<wire x1="14.9056" y1="15.9556" x2="14.9056" y2="10.3804" width="0.2032" layer="1"/> +</signal> +<signal name="N$32"> +<contactref element="J1" pad="P$3"/> +<contactref element="R13" pad="1"/> +<contactref element="U3" pad="6"/> +<wire x1="15.025" y1="19.65" x2="15.025" y2="17.975" width="0.2032" layer="1"/> +<wire x1="15.025" y1="17.975" x2="14.55" y2="17.5" width="0.2032" layer="1"/> +<wire x1="14.55" y1="11.17481875" x2="14.05" y2="10.67481875" width="0.2032" layer="1"/> +<wire x1="14.05" y1="10.67481875" x2="14.05" y2="9.88118125" width="0.2032" layer="1"/> +<wire x1="14.05" y1="9.88118125" x2="14.61118125" y2="9.32" width="0.2032" layer="1"/> +<wire x1="14.61118125" y1="9.32" x2="15.204" y2="9.32" width="0.2032" layer="1"/> +<wire x1="15.204" y1="9.32" x2="16.024" y2="8.5" width="0.2032" layer="1"/> +<wire x1="14.55" y1="17.5" x2="14.55" y2="11.17481875" width="0.2032" layer="1"/> +</signal> +<signal name="N$33"> +<contactref element="U3" pad="11"/> +<contactref element="J1" pad="P$2"/> +<wire x1="15.025" y1="25.55" x2="15.025" y2="23.025" width="0.2032" layer="1"/> +<wire x1="15.025" y1="23.025" x2="15" y2="23" width="0.2032" layer="1"/> +<via x="15" y="23" extent="1-16" drill="0.3"/> +<wire x1="15" y1="23" x2="15" y2="12.318" width="0.2032" layer="16"/> +<wire x1="15" y1="12.318" x2="17.04" y2="10.278" width="0.2032" layer="16"/> +</signal> +<signal name="N$34"> +<contactref element="J1" pad="P$1"/> +<contactref element="U3" pad="10"/> +<wire x1="15.675" y1="25.55" x2="15.675" y2="23.5936" width="0.2032" layer="1"/> +<wire x1="15.675" y1="23.5936" x2="15.5814" y2="23.5" width="0.2032" layer="1"/> +<via x="15.5814" y="23.5" extent="1-16" drill="0.3"/> +<wire x1="15.5564" y1="22.76953125" x2="15.3556" y2="22.56873125" width="0.2032" layer="16"/> +<wire x1="15.5814" y1="23.5" x2="15.5564" y2="23.475" width="0.2032" layer="16"/> +<wire x1="15.5564" y1="23.475" x2="15.5564" y2="22.76953125" width="0.2032" layer="16"/> +<wire x1="15.3556" y1="22.56873125" x2="15.3556" y2="12.4653" width="0.2032" layer="16"/> +<wire x1="16.5849" y1="11.236" x2="17.43681875" y2="11.236" width="0.2032" layer="16"/> +<wire x1="17.43681875" y1="11.236" x2="18.056" y2="10.61681875" width="0.2032" layer="16"/> +<wire x1="15.3556" y1="12.4653" x2="16.5849" y2="11.236" width="0.2032" layer="16"/> +<wire x1="18.056" y1="10.61681875" x2="18.056" y2="8.5" width="0.2032" layer="16"/> +</signal> +<signal name="VSW"> +<contactref element="U4" pad="16"/> +<contactref element="U4" pad="12"/> +<contactref element="U4" pad="1"/> +<contactref element="U4" pad="13"/> +<contactref element="C22" pad="2"/> +<contactref element="L1" pad="2"/> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="42" y="14.95"/> +<vertex x="47" y="14.95"/> +<vertex x="47.1" y="14.85"/> +<vertex x="47.1" y="11.95"/> +<vertex x="46.5" y="11.35"/> +<vertex x="45.6" y="11.35"/> +<vertex x="45.1" y="11.85"/> +<vertex x="45.1" y="12.75"/> +<vertex x="43.9" y="12.75"/> +<vertex x="43.9" y="11.85"/> +<vertex x="43.4" y="11.35"/> +<vertex x="42.5" y="11.35"/> +<vertex x="42" y="11.85"/> +</polygon> +<wire x1="45.975" y1="11.5" x2="46.56313125" y2="11.5" width="0.2032" layer="1"/> +<wire x1="46.56313125" y1="11.5" x2="46.56953125" y2="11.5064" width="0.2032" layer="1"/> +<wire x1="47.03046875" y1="11.5064" x2="47.03686875" y2="11.5" width="0.2032" layer="1"/> +<wire x1="47" y1="11.85" x2="47.03046875" y2="11.5064" width="0" layer="19" extent="1-1"/> +</signal> +<signal name="BUCKBST"> +<contactref element="U4" pad="10"/> +<contactref element="C22" pad="1"/> +<wire x1="46.9436" y1="10.25" x2="47" y2="10.25" width="0.2032" layer="1"/> +<wire x1="45.975" y1="10.5" x2="46.75" y2="10.5" width="0.2032" layer="1"/> +<wire x1="46.75" y1="10.5" x2="47" y2="10.25" width="0.2032" layer="1"/> +</signal> +<signal name="+5V"> +<contactref element="L1" pad="1"/> +<contactref element="C30" pad="1"/> +<contactref element="C34" pad="1"/> +<contactref element="C35" pad="1"/> +<contactref element="C36" pad="1"/> +<contactref element="U4" pad="5"/> +<contactref element="U5" pad="1"/> +<contactref element="U5" pad="3"/> +<contactref element="C27" pad="1"/> +<contactref element="U3" pad="16"/> +<wire x1="10.7" y1="26" x2="11.15" y2="25.55" width="0.2032" layer="1"/> +<wire x1="11.15" y1="25.55" x2="11.775" y2="25.55" width="0.2032" layer="1"/> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="47.1" y="18.05"/> +<vertex x="47" y="18.15"/> +<vertex x="33.2" y="18.15"/> +<vertex x="33" y="17.95"/> +<vertex x="33" y="16.35"/> +<vertex x="46.8" y="16.35"/> +<vertex x="47.1" y="16.65"/> +</polygon> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="28.5" y="9.5"/> +<vertex x="36.1" y="9.5"/> +<vertex x="37.5" y="8.1"/> +<vertex x="37.5" y="-0.5"/> +<vertex x="28.5" y="-0.5"/> +</polygon> +<wire x1="43.75" y1="9.275" x2="42.0202" y2="9.275" width="0.2032" layer="1"/> +<wire x1="42.0202" y1="9.275" x2="41.9" y2="9.3952" width="0.2032" layer="1"/> +<via x="41.9" y="9.3952" extent="1-16" drill="0.3"/> +<wire x1="41.9" y1="9.3952" x2="41.7952" y2="9.5" width="0.2032" layer="16"/> +<wire x1="39.8987875" y1="9.5" x2="39.852803125" y2="9.454015625" width="0.2032" layer="16"/> +<via x="39.852803125" y="9.454015625" extent="1-16" drill="0.3"/> +<wire x1="41.7952" y1="9.5" x2="39.8987875" y2="9.5" width="0.2032" layer="16"/> +<wire x1="39.9" y1="17.15" x2="40.35" y2="16.7" width="0.4064" layer="1"/> +<wire x1="40.35" y1="16.7" x2="41.7" y2="16.7" width="0.4064" layer="1"/> +<wire x1="41.7" y1="16.7" x2="41.7" y2="15.00289375" width="0.4064" layer="1"/> +<wire x1="41.7" y1="15.00289375" x2="41.6944" y2="14.99729375" width="0.4064" layer="1"/> +<wire x1="40.94729375" y1="13.1944" x2="40.3888" y2="13.1944" width="0.4064" layer="1"/> +<wire x1="41.6944" y1="14.99729375" x2="41.6944" y2="13.94150625" width="0.4064" layer="1"/> +<wire x1="41.6944" y1="13.94150625" x2="40.94729375" y2="13.1944" width="0.4064" layer="1"/> +<wire x1="37.85" y1="7.95" x2="32.806" y2="7.95" width="0.4064" layer="1"/> +<wire x1="40.3888" y1="13.1944" x2="39.4" y2="12.2056" width="0.4064" layer="1"/> +<wire x1="39.4" y1="12.2056" x2="39.4" y2="9.5" width="0.4064" layer="1"/> +<wire x1="39.4" y1="9.5" x2="37.85" y2="7.95" width="0.4064" layer="1"/> +<wire x1="39.4" y1="9.5" x2="39.445984375" y2="9.454015625" width="0.4064" layer="1"/> +<wire x1="39.445984375" y1="9.454015625" x2="39.852803125" y2="9.454015625" width="0.4064" layer="1"/> +<wire x1="11.775" y1="25.55" x2="11.775" y2="24.225" width="0.1524" layer="1"/> +<wire x1="11.775" y1="24.225" x2="11.9" y2="24.1" width="0.1524" layer="1"/> +<via x="11.9" y="24.1" extent="1-16" drill="0.3"/> +<wire x1="11.9" y1="24.1" x2="12.4" y2="23.6" width="0.1524" layer="16"/> +<wire x1="12.4" y1="11.7" x2="12" y2="11.3" width="0.1524" layer="16"/> +<wire x1="12" y1="11.3" x2="12" y2="9.9" width="0.1524" layer="16"/> +<wire x1="12" y1="9.9" x2="13" y2="8.9" width="0.1524" layer="16"/> +<wire x1="13" y1="6.6" x2="14.3" y2="5.3" width="0.1524" layer="16"/> +<via x="14.3" y="5.3" extent="1-16" drill="0.3"/> +<wire x1="14.3" y1="5.3" x2="18.2" y2="1.4" width="0.1524" layer="1"/> +<wire x1="18.2" y1="1.4" x2="19.1" y2="1.4" width="0.1524" layer="1"/> +<via x="19.1" y="1.4" extent="1-16" drill="0.3"/> +<wire x1="19.1" y1="1.4" x2="28.9" y2="1.4" width="0.1524" layer="16"/> +<wire x1="28.9" y1="1.4" x2="29" y2="1.5" width="0.1524" layer="16"/> +<via x="29" y="1.5" extent="1-16" drill="0.3"/> +<wire x1="12.4" y1="23.6" x2="12.4" y2="11.7" width="0.1524" layer="16"/> +<wire x1="13" y1="8.9" x2="13" y2="6.6" width="0.1524" layer="16"/> +</signal> +<signal name="N$39"> +<contactref element="R9" pad="2"/> +<contactref element="J1" pad="GRNN"/> +<wire x1="21.358" y1="15.104" x2="19.95" y2="16.512" width="0.2032" layer="1"/> +<wire x1="19.95" y1="16.512" x2="19.95" y2="17.5" width="0.2032" layer="1"/> +</signal> +<signal name="N$41"> +<contactref element="J1" pad="YLWN"/> +<contactref element="R7" pad="2"/> +<wire x1="9.928" y1="15.104" x2="7.532" y2="17.5" width="0.2032" layer="1"/> +<wire x1="7.532" y1="17.5" x2="7.05" y2="17.5" width="0.2032" layer="1"/> +</signal> +<signal name="ATK0-RX"> +<contactref element="U1" pad="48"/> +<contactref element="U3" pad="5"/> +<wire x1="14.375" y1="19.65" x2="14.3" y2="19.725" width="0.2032" layer="1"/> +<wire x1="14.3" y1="19.725" x2="14.3" y2="21.3" width="0.2032" layer="1"/> +<via x="14.3" y="21.3" extent="1-16" drill="0.3"/> +<wire x1="14.3" y1="21.3" x2="14.3" y2="23.9" width="0.2032" layer="16"/> +<wire x1="14.3" y1="23.9" x2="13.2" y2="25" width="0.2032" layer="16"/> +<wire x1="13.2" y1="25" x2="11.9" y2="25" width="0.2032" layer="16"/> +<wire x1="9.4" y1="27.5" x2="9.4" y2="29.9" width="0.2032" layer="16"/> +<via x="9.4" y="29.9" extent="1-16" drill="0.3"/> +<wire x1="9.4" y1="29.9" x2="9.4" y2="33.85" width="0.2032" layer="1"/> +<wire x1="11.9" y1="25" x2="9.4" y2="27.5" width="0.2032" layer="16"/> +</signal> +<signal name="RTD"> +<contactref element="U9" pad="2"/> +<contactref element="R14" pad="2"/> +<contactref element="U1" pad="7"/> +<contactref element="J20" pad="1"/> +<via x="42.435421875" y="52.864578125" extent="1-16" drill="0.3"/> +<wire x1="42.435421875" y1="52.864578125" x2="42.151446875" y2="52.864578125" width="0.2032" layer="16"/> +<wire x1="42.151446875" y1="52.864578125" x2="42.03046875" y2="52.7436" width="0.2032" layer="16"/> +<wire x1="42.03046875" y1="52.7436" x2="41.4564" y2="52.7436" width="0.2032" layer="16"/> +<wire x1="41.4564" y1="52.7436" x2="41.2556" y2="52.9444" width="0.2032" layer="16"/> +<wire x1="32.9473" y1="52.9444" x2="32.493434375" y2="52.490534375" width="0.2032" layer="16"/> +<wire x1="32.493434375" y1="52.490534375" x2="32.493434375" y2="52.206565625" width="0.2032" layer="16"/> +<via x="32.493434375" y="52.206565625" extent="1-16" drill="0.3"/> +<wire x1="32.493434375" y1="52.206565625" x2="32.393434375" y2="52.206565625" width="0.2032" layer="1"/> +<wire x1="31.73046875" y1="51.5436" x2="31.4872875" y2="51.5436" width="0.2032" layer="1"/> +<wire x1="32.393434375" y1="52.206565625" x2="31.73046875" y2="51.5436" width="0.2032" layer="1"/> +<wire x1="29.85" y1="49.9063125" x2="29.85" y2="48.7" width="0.2032" layer="1"/> +<wire x1="41.2556" y1="52.9444" x2="32.9473" y2="52.9444" width="0.2032" layer="16"/> +<wire x1="31.4872875" y1="51.5436" x2="29.85" y2="49.9063125" width="0.2032" layer="1"/> +<wire x1="24.1" y1="48.3" x2="24.6" y2="47.8" width="0.2032" layer="16"/> +<wire x1="28.95" y1="47.8" x2="29.85" y2="48.7" width="0.2032" layer="16"/> +<via x="29.85" y="48.7" extent="1-16" drill="0.3"/> +<wire x1="24.6" y1="47.8" x2="28.95" y2="47.8" width="0.2032" layer="16"/> +<via x="19.2452" y="41.4064" extent="1-16" drill="0.3"/> +<wire x1="18.4" y1="36.85" x2="18.5339" y2="36.9839" width="0.1524" layer="1"/> +<wire x1="20.5946875" y1="41.5086" x2="19.6053125" y2="41.5086" width="0.1524" layer="1"/> +<wire x1="19.6053125" y1="41.5086" x2="19.5031125" y2="41.4064" width="0.1524" layer="1"/> +<wire x1="19.5031125" y1="41.4064" x2="19.2452" y2="41.4064" width="0.1524" layer="1"/> +<wire x1="18.5339" y1="36.9839" x2="19.51824375" y2="36.9839" width="0.1524" layer="1"/> +<wire x1="21.531" y1="40.5722875" x2="20.5946875" y2="41.5086" width="0.1524" layer="1"/> +<wire x1="19.51824375" y1="36.9839" x2="21.531" y2="38.99665625" width="0.1524" layer="1"/> +<wire x1="21.531" y1="38.99665625" x2="21.531" y2="40.5722875" width="0.1524" layer="1"/> +<wire x1="19.2452" y1="41.4064" x2="20.5" y2="42.6612" width="0.1524" layer="16"/> +<wire x1="20.5" y1="42.6612" x2="20.5" y2="44.9" width="0.1524" layer="16"/> +<via x="20.5" y="44.9" extent="1-16" drill="0.3"/> +<wire x1="20.5" y1="44.9" x2="23.9" y2="48.3" width="0.1524" layer="1"/> +<wire x1="23.9" y1="48.3" x2="24.1" y2="48.3" width="0.1524" layer="1"/> +<wire x1="42.435421875" y1="52.864578125" x2="42.635421875" y2="52.864578125" width="0.1524" layer="1"/> +<wire x1="42.635421875" y1="52.864578125" x2="43.1952" y2="52.3048" width="0.1524" layer="1"/> +<wire x1="43.1952" y1="52.3048" x2="43.1952" y2="48.37374375" width="0.1524" layer="1"/> +<wire x1="43.1952" y1="48.37374375" x2="45.87374375" y2="45.6952" width="0.1524" layer="1"/> +<wire x1="45.87374375" y1="45.6952" x2="49" y2="45.6952" width="0.1524" layer="1"/> +<wire x1="49" y1="45.6952" x2="49.12625625" y2="45.6952" width="0.1524" layer="1"/> +<wire x1="49" y1="45.6952" x2="49.1952" y2="45.6952" width="0.1524" layer="1"/> +<wire x1="49.1952" y1="45.6952" x2="51" y2="47.5" width="0.1524" layer="1"/> +<wire x1="51" y1="47.5" x2="52.4" y2="47.5" width="0.1524" layer="1"/> +<wire x1="52.4" y1="47.5" x2="52.45" y2="47.45" width="0.1524" layer="1"/> +</signal> +<signal name="SHNT-U-HI"> +<contactref element="R18" pad="1"/> +<contactref element="R4" pad="SA"/> +<wire x1="50.1" y1="38.086" x2="50.1" y2="39" width="0.2032" layer="1"/> +<via x="50.1" y="39" extent="1-16" drill="0.3"/> +<wire x1="50.1" y1="39" x2="48.9" y2="37.8" width="0.2032" layer="16"/> +<wire x1="46.6" y1="31.7" x2="45.8" y2="30.9" width="0.2032" layer="16"/> +<via x="45.8" y="30.9" extent="1-16" drill="0.3"/> +<wire x1="46.0686" y1="37.41044375" x2="46.0686" y2="36.92879375" width="0.2032" layer="16"/> +<wire x1="46.6" y1="36.39739375" x2="46.6" y2="31.7" width="0.2032" layer="16"/> +<wire x1="46.0686" y1="36.92879375" x2="46.6" y2="36.39739375" width="0.2032" layer="16"/> +<wire x1="46.45815625" y1="37.8" x2="46.0686" y2="37.41044375" width="0.2032" layer="16"/> +<wire x1="48.9" y1="37.8" x2="46.45815625" y2="37.8" width="0.2032" layer="16"/> +<wire x1="45.8" y1="30.9" x2="46.1552" y2="30.5448" width="0.2032" layer="1"/> +<wire x1="46.1552" y1="27.4448" x2="46.54764375" y2="27.05235625" width="0.2032" layer="1"/> +<wire x1="46.54764375" y1="26.6008" x2="46.34684375" y2="26.4" width="0.2032" layer="1"/> +<via x="46.34684375" y="26.4" extent="1-16" drill="0.3"/> +<wire x1="46.34684375" y1="26.4" x2="46.5" y2="26.24684375" width="0.2032" layer="16"/> +<wire x1="46.1552" y1="25.83490625" x2="46.1552" y2="25.37396875" width="0.2032" layer="16"/> +<wire x1="46.1552" y1="25.37396875" x2="46.356" y2="25.17316875" width="0.2032" layer="16"/> +<wire x1="46.5" y1="26.24684375" x2="46.5" y2="26.17970625" width="0.2032" layer="16"/> +<wire x1="46.5" y1="26.17970625" x2="46.1552" y2="25.83490625" width="0.2032" layer="16"/> +<wire x1="46.356" y1="24.4228" x2="46.2" y2="24.2668" width="0.2032" layer="16"/> +<wire x1="46.356" y1="25.17316875" x2="46.356" y2="24.4228" width="0.2032" layer="16"/> +<wire x1="46.2" y1="24.2668" x2="41.2361" y2="24.2668" width="0.2032" layer="16"/> +<wire x1="41.112" y1="24.3909" x2="41.112" y2="24.72776875" width="0.2032" layer="16"/> +<wire x1="41.112" y1="24.72776875" x2="40.57776875" y2="25.262" width="0.2032" layer="16"/> +<wire x1="41.2361" y1="24.2668" x2="41.112" y2="24.3909" width="0.2032" layer="16"/> +<wire x1="36.012" y1="25.262" x2="35.1" y2="24.35" width="0.2032" layer="16"/> +<via x="35.1" y="24.35" extent="1-16" drill="0.3"/> +<wire x1="46.1552" y1="30.5448" x2="46.1552" y2="27.4448" width="0.2032" layer="1"/> +<wire x1="46.54764375" y1="27.05235625" x2="46.54764375" y2="26.6008" width="0.2032" layer="1"/> +<wire x1="40.57776875" y1="25.262" x2="36.012" y2="25.262" width="0.2032" layer="16"/> +</signal> +<signal name="SHNT-U-LO"> +<contactref element="R19" pad="1"/> +<contactref element="R4" pad="SB"/> +<wire x1="50.1" y1="40.886" x2="50.1" y2="40.3" width="0.2032" layer="1"/> +<via x="50.1" y="40.3" extent="1-16" drill="0.3"/> +<wire x1="50.1" y1="40.3" x2="49.5" y2="39.7" width="0.2032" layer="16"/> +<wire x1="49.5" y1="39.7" x2="49.5" y2="38.9029" width="0.2032" layer="16"/> +<wire x1="49.5" y1="38.9029" x2="48.7527" y2="38.1556" width="0.2032" layer="16"/> +<wire x1="46.31085625" y1="38.1556" x2="45.713" y2="37.55774375" width="0.2032" layer="16"/> +<wire x1="45.713" y1="37.55774375" x2="45.713" y2="36.78149375" width="0.2032" layer="16"/> +<wire x1="48.7527" y1="38.1556" x2="46.31085625" y2="38.1556" width="0.2032" layer="16"/> +<wire x1="45.713" y1="36.78149375" x2="46.2444" y2="36.25009375" width="0.2032" layer="16"/> +<wire x1="46.2444" y1="36.25009375" x2="46.2444" y2="31.8473" width="0.2032" layer="16"/> +<wire x1="46.2444" y1="31.8473" x2="46.0543" y2="31.6572" width="0.2032" layer="16"/> +<wire x1="46.0543" y1="31.6572" x2="45.77033125" y2="31.6572" width="0.2032" layer="16"/> +<via x="45.77033125" y="31.6572" extent="1-16" drill="0.3"/> +<wire x1="45.77033125" y1="31.6572" x2="45.97113125" y2="31.4564" width="0.2032" layer="1"/> +<wire x1="45.97113125" y1="31.4564" x2="46.03046875" y2="31.4564" width="0.2032" layer="1"/> +<wire x1="46.5108" y1="27.5956875" x2="46.90324375" y2="27.20324375" width="0.2032" layer="1"/> +<wire x1="46.5108" y1="30.97606875" x2="46.5108" y2="27.5956875" width="0.2032" layer="1"/> +<wire x1="46.90324375" y1="27.20324375" x2="46.90324375" y2="25.79608125" width="0.2032" layer="1"/> +<wire x1="46.90324375" y1="25.79608125" x2="46.7116" y2="25.6044375" width="0.2032" layer="1"/> +<via x="46.7116" y="25.6044375" extent="1-16" drill="0.3"/> +<wire x1="46.7116" y1="25.6044375" x2="46.7116" y2="24.0116" width="0.2032" layer="16"/> +<wire x1="46.7116" y1="24.0116" x2="46.6112" y2="23.9112" width="0.2032" layer="16"/> +<wire x1="41.0888" y1="23.9112" x2="40.7564" y2="24.2436" width="0.2032" layer="16"/> +<wire x1="40.7564" y1="24.2436" x2="40.7564" y2="24.58046875" width="0.2032" layer="16"/> +<wire x1="40.7564" y1="24.58046875" x2="40.43046875" y2="24.9064" width="0.2032" layer="16"/> +<wire x1="37.3564" y1="24.9064" x2="36.8" y2="24.35" width="0.2032" layer="16"/> +<via x="36.8" y="24.35" extent="1-16" drill="0.3"/> +<wire x1="46.03046875" y1="31.4564" x2="46.5108" y2="30.97606875" width="0.2032" layer="1"/> +<wire x1="46.6112" y1="23.9112" x2="41.0888" y2="23.9112" width="0.2032" layer="16"/> +<wire x1="40.43046875" y1="24.9064" x2="37.3564" y2="24.9064" width="0.2032" layer="16"/> +</signal> +<signal name="SL-U"> +<contactref element="Q2" pad="P$3"/> +<contactref element="Q2" pad="P$2"/> +<contactref element="Q2" pad="P$1"/> +<contactref element="U2" pad="P$44"/> +<wire x1="41.49999375" y1="38.499996875" x2="41.555496875" y2="38.5555" width="0.2032" layer="1"/> +<wire x1="41.555496875" y1="38.5555" x2="42.475696875" y2="38.5555" width="0.2032" layer="1"/> +<wire x1="42.475696875" y1="38.5555" x2="42.662890625" y2="38.74269375" width="0.2032" layer="1"/> +<contactref element="R4" pad="A"/> +<wire x1="48.406565625" y1="36.890534375" x2="48.406565625" y2="36.606565625" width="0.2032" layer="1"/> +<via x="48.406565625" y="36.606565625" extent="1-16" drill="0.3"/> +<wire x1="48.406565625" y1="36.606565625" x2="49.793434375" y2="36.606565625" width="0.2032" layer="16"/> +<wire x1="49.793434375" y1="36.606565625" x2="50.2" y2="36.2" width="0.2032" layer="16"/> +<via x="50.2" y="36.2" extent="1-16" drill="0.3"/> +<wire x1="42.662890625" y1="38.74269375" x2="46.55440625" y2="38.74269375" width="0.2032" layer="1"/> +<wire x1="46.55440625" y1="38.74269375" x2="48.406565625" y2="36.890534375" width="0.2032" layer="1"/> +<contactref element="Q7" pad="P$1"/> +<contactref element="Q7" pad="P$2"/> +<contactref element="Q7" pad="P$3"/> +<polygon width="0.0762" layer="1" thermals="no" rank="3"> +<vertex x="56.5" y="34.5"/> +<vertex x="56.5" y="46.7"/> +<vertex x="53.5" y="46.7"/> +<vertex x="53.5" y="39.5"/> +<vertex x="50.5" y="39.5"/> +<vertex x="50.5" y="37.5"/> +<vertex x="49.5" y="37.5"/> +<vertex x="49.5" y="34.5"/> +<vertex x="56.4" y="34.5"/> +</polygon> +</signal> +<signal name="VCC9"> </signal> </signals> <mfgpreviewcolors> @@ -3649,10 +4535,4 @@ design rules under a new name.</description> </mfgpreviewcolors> </board> </drawing> -<compatibility> -<note version="6.3" minversion="6.2.2" severity="warning"> -Since Version 6.2.2 text objects can contain more than one line, -which will not be processed correctly with this version. -</note> -</compatibility> </eagle> diff --git a/circuit/atkbldcdriver/atkbldcdriver.sch b/circuit/atkbldcdriver/atkbldcdriver.sch index 268514bff110e18c23901c9637333ce53d67ddad..2c55a3c9fb2bdf2ec26bd30015179312e4c3975d 100644 --- a/circuit/atkbldcdriver/atkbldcdriver.sch +++ b/circuit/atkbldcdriver/atkbldcdriver.sch @@ -1,12 +1,12 @@ <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE eagle SYSTEM "eagle.dtd"> -<eagle version="9.1.1"> +<eagle version="9.1.3"> <drawing> <settings> -<setting alwaysvectorfont="no"/> +<setting alwaysvectorfont="yes"/> <setting verticaltext="up"/> </settings> -<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/> +<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="yes" altdistance="0.01" altunitdist="inch" altunit="inch"/> <layers> <layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/> <layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/> @@ -191,6 +191,12 @@ <text x="-2.54" y="-2.54" size="1.778" layer="96" rot="R90">>VALUE</text> <pin name="VCC" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/> </symbol> +<symbol name="+5V" urn="urn:adsk.eagle:symbol:26929/1" library_version="1"> +<wire x1="1.27" y1="-1.905" x2="0" y2="0" width="0.254" layer="94"/> +<wire x1="0" y1="0" x2="-1.27" y2="-1.905" width="0.254" layer="94"/> +<text x="-2.54" y="-5.08" size="1.778" layer="96" rot="R90">>VALUE</text> +<pin name="+5V" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/> +</symbol> </symbols> <devicesets> <deviceset name="+3V3" urn="urn:adsk.eagle:component:26981/1" prefix="+3V3" library_version="1"> @@ -232,6 +238,19 @@ </device> </devices> </deviceset> +<deviceset name="+5V" urn="urn:adsk.eagle:component:26963/1" prefix="P+" library_version="1"> +<description><b>SUPPLY SYMBOL</b></description> +<gates> +<gate name="1" symbol="+5V" x="0" y="0"/> +</gates> +<devices> +<device name=""> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> </devicesets> </library> <library name="fab"> @@ -462,22 +481,6 @@ chip</description> <rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/> <rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/> </package> -<package name="744777920-INDUCTOR"> -<smd name="P$1" x="0" y="3" dx="1.7" dy="2" layer="1"/> -<smd name="P$2" x="0" y="-3" dx="1.7" dy="2" layer="1"/> -<wire x1="-4" y1="0" x2="-4" y2="3" width="0.127" layer="21"/> -<wire x1="-4" y1="3" x2="-3" y2="4" width="0.127" layer="21" curve="-90"/> -<wire x1="-3" y1="4" x2="3" y2="4" width="0.127" layer="21"/> -<wire x1="3" y1="4" x2="4" y2="3" width="0.127" layer="21" curve="-90"/> -<wire x1="4" y1="3" x2="4" y2="-3" width="0.127" layer="21"/> -<wire x1="4" y1="-3" x2="3" y2="-4" width="0.127" layer="21" curve="-90"/> -<wire x1="3" y1="-4" x2="-3" y2="-4" width="0.127" layer="21"/> -<wire x1="-3" y1="-4" x2="-4" y2="-3" width="0.127" layer="21" curve="-90"/> -<wire x1="-4" y1="-3" x2="-4" y2="0" width="0.127" layer="21"/> -<rectangle x1="-4" y1="-4" x2="4" y2="4" layer="39"/> -<text x="5.08" y="2.54" size="1.016" layer="25">>NAME</text> -<text x="5.08" y="1.27" size="1.016" layer="27">>VALUE</text> -</package> <package name="0603-RES"> <wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/> <wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/> @@ -494,42 +497,6 @@ chip</description> <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/> <rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/> </package> -<package name="SPM6530-IND"> -<smd name="1" x="0" y="2.775" dx="3.4" dy="1.85" layer="1"/> -<smd name="2" x="0" y="-2.775" dx="3.4" dy="1.85" layer="1"/> -<wire x1="-3.25" y1="3.85" x2="-3.25" y2="-3.85" width="0.127" layer="21"/> -<wire x1="-3.25" y1="-3.85" x2="3.25" y2="-3.85" width="0.127" layer="21"/> -<wire x1="3.25" y1="-3.85" x2="3.25" y2="3.85" width="0.127" layer="21"/> -<wire x1="3.25" y1="3.85" x2="-3.25" y2="3.85" width="0.127" layer="21"/> -<text x="3.81" y="2.54" size="1.016" layer="25">>NAME</text> -<text x="3.81" y="-3.81" size="1.016" layer="27">>VALUE</text> -</package> -<package name="IHLP-5050FD-01-IND"> -<smd name="1" x="0" y="5.4102" dx="4.953" dy="2.9464" layer="1"/> -<smd name="2" x="0" y="-5.4102" dx="4.953" dy="2.9464" layer="1"/> -<wire x1="6.4516" y1="6.604" x2="6.4516" y2="-6.604" width="0.127" layer="21"/> -<wire x1="3.81" y1="-6.604" x2="6.4516" y2="-6.604" width="0.127" layer="21"/> -<wire x1="6.4516" y1="6.604" x2="3.81" y2="6.604" width="0.127" layer="21"/> -<wire x1="-3.81" y1="6.604" x2="-6.4516" y2="6.604" width="0.127" layer="21"/> -<wire x1="-6.4516" y1="6.604" x2="-6.4516" y2="-6.604" width="0.127" layer="21"/> -<wire x1="-6.4516" y1="-6.604" x2="-3.81" y2="-6.604" width="0.127" layer="21"/> -<text x="5.08" y="7.62" size="1.016" layer="25">>NAME</text> -<text x="5.08" y="-8.89" size="1.016" layer="27">>VALUE</text> -</package> -<package name="7443340330-IND"> -<smd name="P$1" x="0" y="3.35" dx="3" dy="2.3" layer="1"/> -<smd name="P$2" x="0" y="-3.35" dx="3" dy="2.3" layer="1"/> -<wire x1="-2" y1="4" x2="-4" y2="4" width="0.127" layer="21"/> -<wire x1="-4" y1="4" x2="-4" y2="-4" width="0.127" layer="21"/> -<wire x1="-4" y1="-4" x2="-2" y2="-4" width="0.127" layer="21"/> -<wire x1="2" y1="-4" x2="4" y2="-4" width="0.127" layer="21"/> -<wire x1="4" y1="-4" x2="4" y2="4" width="0.127" layer="21"/> -<wire x1="4" y1="4" x2="2" y2="4" width="0.127" layer="21"/> -<text x="3" y="5" size="1.016" layer="25">>NAME</text> -<text x="3" y="-6" size="1.016" layer="27">>VALUE</text> -<rectangle x1="-1.15" y1="2.95" x2="1.15" y2="4.45" layer="51"/> -<rectangle x1="-1.15" y1="-4.45" x2="1.15" y2="-2.95" layer="51"/> -</package> <package name="0402-RES"> <description><b>CAPACITOR</b><p> chip</description> @@ -548,54 +515,6 @@ chip</description> <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/> <rectangle x1="-0.2032" y1="-0.3556" x2="0.2032" y2="0.3556" layer="21"/> </package> -<package name="8X8-IND"> -<smd name="1" x="0" y="3.2" dx="2.2" dy="1.6" layer="1"/> -<smd name="2" x="0" y="-3.2" dx="2.2" dy="1.6" layer="1"/> -<wire x1="2" y1="-4" x2="4" y2="-4" width="0.127" layer="21"/> -<wire x1="4" y1="-4" x2="4" y2="4" width="0.127" layer="21"/> -<wire x1="4" y1="4" x2="2" y2="4" width="0.127" layer="21"/> -<wire x1="-2" y1="4" x2="-4" y2="4" width="0.127" layer="21"/> -<wire x1="-4" y1="4" x2="-4" y2="-4" width="0.127" layer="21"/> -<wire x1="-4" y1="-4" x2="-2" y2="-4" width="0.127" layer="21"/> -<text x="-5" y="5" size="1.27" layer="25">>NAME</text> -<text x="-5" y="-6" size="1.27" layer="27">>VALUE</text> -<rectangle x1="-3.81" y1="-3.81" x2="3.81" y2="3.81" layer="39"/> -</package> -<package name="744029100-IND"> -<smd name="1" x="0" y="1.1" dx="3.2" dy="1" layer="1"/> -<smd name="2" x="0" y="-1.1" dx="3.2" dy="1" layer="1"/> -<wire x1="-2" y1="2" x2="-2" y2="-2" width="0.127" layer="21"/> -<wire x1="-2" y1="-2" x2="2" y2="-2" width="0.127" layer="21"/> -<wire x1="2" y1="-2" x2="2" y2="2" width="0.127" layer="21"/> -<wire x1="2" y1="2" x2="-2" y2="2" width="0.127" layer="21"/> -<text x="-3" y="2.3" size="1.27" layer="25">>NAME</text> -<text x="-3" y="-3.6" size="1.27" layer="27">>VALUE</text> -</package> -<package name="7447709470-IND"> -<smd name="1" x="0" y="4.95" dx="5.4" dy="2.9" layer="1"/> -<smd name="2" x="0" y="-4.95" dx="5.4" dy="2.9" layer="1"/> -<wire x1="-3" y1="6" x2="-6" y2="6" width="0.127" layer="21"/> -<wire x1="-6" y1="6" x2="-6" y2="-6" width="0.127" layer="21"/> -<wire x1="-6" y1="-6" x2="-3" y2="-6" width="0.127" layer="21"/> -<wire x1="3" y1="-6" x2="6" y2="-6" width="0.127" layer="21"/> -<wire x1="6" y1="-6" x2="6" y2="6" width="0.127" layer="21"/> -<wire x1="6" y1="6" x2="3" y2="6" width="0.127" layer="21"/> -<text x="-7" y="8" size="1.27" layer="25">>NAME</text> -<text x="-7" y="-9" size="1.27" layer="27">>VALUE</text> -</package> -<package name="7447789002-IND"> -<smd name="1" x="0" y="3" dx="1.7" dy="2" layer="1"/> -<smd name="2" x="0" y="-3" dx="1.7" dy="2" layer="1"/> -<wire x1="2" y1="-4" x2="4" y2="-4" width="0.127" layer="21"/> -<wire x1="4" y1="-4" x2="4" y2="4" width="0.127" layer="21"/> -<wire x1="4" y1="4" x2="2" y2="4" width="0.127" layer="21"/> -<wire x1="-2" y1="4" x2="-4" y2="4" width="0.127" layer="21"/> -<wire x1="-4" y1="4" x2="-4" y2="-4" width="0.127" layer="21"/> -<wire x1="-4" y1="-4" x2="-2" y2="-4" width="0.127" layer="21"/> -<text x="-5" y="5" size="1.27" layer="25">>NAME</text> -<text x="-5" y="-6" size="1.27" layer="27">>VALUE</text> -<rectangle x1="-3.81" y1="-3.81" x2="3.81" y2="3.81" layer="39"/> -</package> <package name="R2010"> <description><b>RESISTOR</b><p> chip</description> @@ -659,21 +578,6 @@ chip</description> <text x="1.524" y="-5.842" size="1.27" layer="97">>VOLTAGE</text> <text x="1.524" y="-7.62" size="1.27" layer="97">>TYPE</text> </symbol> -<symbol name="INDUCTOR"> -<wire x1="0" y1="5.08" x2="1.27" y2="3.81" width="0.254" layer="94" curve="-90" cap="flat"/> -<wire x1="0" y1="2.54" x2="1.27" y2="3.81" width="0.254" layer="94" curve="90" cap="flat"/> -<wire x1="0" y1="2.54" x2="1.27" y2="1.27" width="0.254" layer="94" curve="-90" cap="flat"/> -<wire x1="0" y1="0" x2="1.27" y2="1.27" width="0.254" layer="94" curve="90" cap="flat"/> -<wire x1="0" y1="0" x2="1.27" y2="-1.27" width="0.254" layer="94" curve="-90" cap="flat"/> -<wire x1="0" y1="-2.54" x2="1.27" y2="-1.27" width="0.254" layer="94" curve="90" cap="flat"/> -<wire x1="0" y1="-2.54" x2="1.27" y2="-3.81" width="0.254" layer="94" curve="-90" cap="flat"/> -<wire x1="0" y1="-5.08" x2="1.27" y2="-3.81" width="0.254" layer="94" curve="90" cap="flat"/> -<text x="-1.27" y="-5.08" size="1.778" layer="95" rot="R90">>NAME</text> -<text x="3.81" y="-5.08" size="1.778" layer="96" rot="R90">>VALUE</text> -<pin name="2" x="0" y="-7.62" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/> -<pin name="1" x="0" y="7.62" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/> -<text x="6.35" y="-5.08" size="1.27" layer="97" rot="R90">>PACKAGE</text> -</symbol> <symbol name="RESISTOR"> <wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/> <wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/> @@ -767,120 +671,6 @@ Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.</description> </device> </devices> </deviceset> -<deviceset name="INDUCTOR" prefix="L" uservalue="yes"> -<gates> -<gate name="G$1" symbol="INDUCTOR" x="0" y="0"/> -</gates> -<devices> -<device name="-744777920" package="744777920-INDUCTOR"> -<connects> -<connect gate="G$1" pin="1" pad="P$1"/> -<connect gate="G$1" pin="2" pad="P$2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-0805" package="0805"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""> -<attribute name="PACKAGE" value="0805"/> -</technology> -</technologies> -</device> -<device name="-0603" package="0603-RES"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""> -<attribute name="PACKAGE" value="0603"/> -</technology> -</technologies> -</device> -<device name="-SPM6530" package="SPM6530-IND"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-IHLP-5050FD-01" package="IHLP-5050FD-01-IND"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-7443340330" package="7443340330-IND"> -<connects> -<connect gate="G$1" pin="1" pad="P$1"/> -<connect gate="G$1" pin="2" pad="P$2"/> -</connects> -<technologies> -<technology name=""> -<attribute name="PACKAGE" value="7443340330"/> -</technology> -</technologies> -</device> -<device name="-0402" package="0402-RES"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""> -<attribute name="PACKAGE" value="0402"/> -</technology> -</technologies> -</device> -<device name="-744778002" package="8X8-IND"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-744029100" package="744029100-IND"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-7447709470" package="7447709470-IND"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-7447789002" package="7447789002-IND"> -<connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -</devices> -</deviceset> <deviceset name="RESISTOR" prefix="R" uservalue="yes"> <description><b>Resistor</b> Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</description> @@ -1035,7 +825,7 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <smd name="P$54" x="3.74999375" y="5.7499875" dx="1.5494" dy="0.2794" layer="1"/> <smd name="P$55" x="3.74999375" y="6.2499875" dx="1.5494" dy="0.2794" layer="1"/> <smd name="P$56" x="3.74999375" y="6.749984375" dx="1.5494" dy="0.2794" layer="1"/> -<smd name="P$57" x="0" y="0" dx="3.5814" dy="6.35" layer="1"/> +<smd name="P$57" x="0" y="0" dx="3.5814" dy="6.35" layer="1" thermals="no"/> <wire x1="-3.185478125" y1="7.08869375" x2="-3.185478125" y2="-7.088696875" width="0.1524" layer="21"/> <wire x1="-3.185478125" y1="-7.088696875" x2="3.185478125" y2="-7.088696875" width="0.127" layer="21"/> <wire x1="3.185478125" y1="-7.088696875" x2="3.185478125" y2="7.08869375" width="0.127" layer="21"/> @@ -1056,19 +846,63 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <package name="PWRPAD_2-05MM"> <pad name="P$1" x="0" y="0" drill="2.05" diameter="3.8" thermals="no"/> </package> -<package name="PWRPAD_M3-PEM-MOUNT"> -<pad name="P$1" x="0" y="0" drill="4.4" diameter="7" thermals="no"/> -<polygon width="0.127" layer="31"> -<vertex x="-0.6" y="3.6"/> -<vertex x="0.6" y="3.6"/> -<vertex x="0.4" y="2.1"/> -<vertex x="-0.4" y="2.1"/> -</polygon> -<polygon width="0.127" layer="31"> -<vertex x="0.6" y="-3.6"/> -<vertex x="-0.6" y="-3.6"/> -<vertex x="-0.4" y="-2.1"/> -<vertex x="0.4" y="-2.1"/> +<package name="WSL2726"> +<description><b>SMD SHUNT RESISTOR</b></description> +<wire x1="-4.8768" y1="7.9756" x2="4.8768" y2="7.9756" width="0.2032" layer="51"/> +<wire x1="4.8768" y1="7.9756" x2="4.8768" y2="-0.3556" width="0.2032" layer="51"/> +<wire x1="4.8768" y1="-0.3556" x2="-4.8768" y2="-0.3556" width="0.2032" layer="51"/> +<wire x1="-4.8768" y1="-0.3556" x2="-4.8768" y2="7.9756" width="0.2032" layer="51"/> +<smd name="A" x="3.302" y="2.794" dx="2.4384" dy="5.588" layer="1"/> +<smd name="SA" x="3.302" y="6.9215" dx="2.4384" dy="0.889" layer="1"/> +<smd name="B" x="-3.302" y="2.794" dx="2.4384" dy="5.588" layer="1"/> +<smd name="SB" x="-3.302" y="6.9215" dx="2.4384" dy="0.889" layer="1"/> +<text x="-0.3556" y="-0.0508" size="1.27" layer="25" rot="R90">>NAME</text> +<text x="1.5748" y="-0.0508" size="1.27" layer="27" rot="R90">>VALUE</text> +</package> +<package name="R2512"> +<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/> +<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/> +<smd name="A" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/> +<smd name="B" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/> +<text x="-2.54" y="1.905" size="1.016" layer="25">>NAME</text> +<text x="-2.54" y="-3.175" size="1.016" layer="27">>VALUE</text> +<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/> +<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/> +<smd name="SA" x="-1.414" y="1.3" dx="0.5" dy="0.5" layer="1" rot="R180"/> +<smd name="SB" x="1.386" y="1.3" dx="0.5" dy="0.5" layer="1"/> +<wire x1="-1.4" y1="1.3" x2="-2.4" y2="1.3" width="0.2032" layer="1"/> +<wire x1="1.4" y1="1.3" x2="2.2" y2="1.3" width="0.2032" layer="1"/> +</package> +<package name="BFC-UM"> +<pad name="P$1" x="-4.9784" y="0" drill="2.032" diameter="3.81"/> +<pad name="P$2" x="4.9784" y="0" drill="2.032" diameter="3.81"/> +<circle x="0" y="0" radius="9.9822" width="0.127" layer="21"/> +<text x="-2.54" y="3.81" size="1.27" layer="25">>NAME</text> +<text x="-2.54" y="-5.08" size="1.27" layer="27">>VALUE</text> +</package> +<package name="BFC-8MM"> +<pad name="P$1" x="-2" y="0" drill="1" diameter="1.9304"/> +<pad name="P$2" x="2" y="0" drill="1" diameter="1.9304"/> +<circle x="0" y="0" radius="6" width="0.127" layer="21"/> +<text x="-1" y="2" size="0.4064" layer="25">>NAME</text> +<text x="-1" y="-2" size="0.4064" layer="27">>VALUE</text> +</package> +<package name="PWRPAD_3-25MM-SKINNY"> +<pad name="P$1" x="0" y="0" drill="3.25" diameter="5.35" thermals="no"/> +</package> +<package name="PWRPAD_M3_STANDOFF"> +<pad name="P$1" x="0" y="0" drill="4.4" diameter="7" thermals="no"/> +<polygon width="0.127" layer="31"> +<vertex x="-0.6" y="3.6"/> +<vertex x="0.6" y="3.6"/> +<vertex x="0.4" y="2.1"/> +<vertex x="-0.4" y="2.1"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="0.6" y="-3.6"/> +<vertex x="-0.6" y="-3.6"/> +<vertex x="-0.4" y="-2.1"/> +<vertex x="0.4" y="-2.1"/> </polygon> <polygon width="0.127" layer="31"> <vertex x="-3.6" y="-0.6"/> @@ -1108,71 +942,345 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc </polygon> <circle x="0" y="0" radius="3.5" width="0.125" layer="51"/> </package> -<package name="WSL2726"> -<description><b>SMD SHUNT RESISTOR</b></description> -<wire x1="-4.8768" y1="7.9756" x2="4.8768" y2="7.9756" width="0.2032" layer="51"/> -<wire x1="4.8768" y1="7.9756" x2="4.8768" y2="-0.3556" width="0.2032" layer="51"/> -<wire x1="4.8768" y1="-0.3556" x2="-4.8768" y2="-0.3556" width="0.2032" layer="51"/> -<wire x1="-4.8768" y1="-0.3556" x2="-4.8768" y2="7.9756" width="0.2032" layer="51"/> -<smd name="A" x="3.302" y="2.794" dx="2.4384" dy="5.588" layer="1"/> -<smd name="SA" x="3.302" y="6.9215" dx="2.4384" dy="0.889" layer="1"/> -<smd name="B" x="-3.302" y="2.794" dx="2.4384" dy="5.588" layer="1"/> -<smd name="SB" x="-3.302" y="6.9215" dx="2.4384" dy="0.889" layer="1"/> -<text x="-0.3556" y="-0.0508" size="1.27" layer="25" rot="R90">>NAME</text> -<text x="1.5748" y="-0.0508" size="1.27" layer="27" rot="R90">>VALUE</text> +<package name="PWRPAD_M25_STANDOFF"> +<pad name="P$1" x="0" y="0" drill="3.7" diameter="6" thermals="no"/> +<polygon width="0.127" layer="31"> +<vertex x="-0.6" y="3"/> +<vertex x="0.6" y="3"/> +<vertex x="0.4" y="1.9"/> +<vertex x="-0.4" y="1.9"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="0.6" y="-3"/> +<vertex x="-0.6" y="-3"/> +<vertex x="-0.4" y="-1.9"/> +<vertex x="0.4" y="-1.9"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="-3" y="-0.6"/> +<vertex x="-3" y="0.6"/> +<vertex x="-1.9" y="0.4"/> +<vertex x="-1.9" y="-0.4"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="3" y="0.5"/> +<vertex x="3" y="-0.7"/> +<vertex x="1.9" y="-0.5"/> +<vertex x="1.9" y="0.3"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="-2.55269375" y="1.73136875"/> +<vertex x="-1.704165625" y="2.579896875"/> +<vertex x="-0.99203125" y="1.584921875"/> +<vertex x="-1.55771875" y="1.0192375"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="2.49705625" y="-1.72131875"/> +<vertex x="1.648528125" y="-2.569846875"/> +<vertex x="1.03639375" y="-1.574871875"/> +<vertex x="1.60208125" y="-1.0091875"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="-1.704165625" y="-2.669846875"/> +<vertex x="-2.55269375" y="-1.82131875"/> +<vertex x="-1.55771875" y="-1.1091875"/> +<vertex x="-0.99203125" y="-1.674871875"/> +</polygon> +<polygon width="0.127" layer="31"> +<vertex x="1.748528125" y="2.579896875"/> +<vertex x="2.59705625" y="1.73136875"/> +<vertex x="1.60208125" y="1.0192375"/> +<vertex x="1.03639375" y="1.584921875"/> +</polygon> </package> -<package name="R2512"> -<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/> -<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/> -<smd name="A" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/> -<smd name="B" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/> -<text x="-2.54" y="1.905" size="1.016" layer="25">>NAME</text> -<text x="-2.54" y="-3.175" size="1.016" layer="27">>VALUE</text> -<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/> -<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/> -<smd name="SA" x="-1.414" y="1.3" dx="0.5" dy="0.5" layer="1" rot="R180"/> -<smd name="SB" x="1.386" y="1.3" dx="0.5" dy="0.5" layer="1"/> -<wire x1="-1.4" y1="1.3" x2="-2.4" y2="1.3" width="0.2032" layer="1"/> -<wire x1="1.4" y1="1.3" x2="2.2" y2="1.3" width="0.2032" layer="1"/> +<package name="DSOP-ADVANCE"> +<smd name="P$1" x="-1.905" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$2" x="-0.635" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$3" x="0.635" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$4" x="1.905" y="-2.8" dx="0.65" dy="1" layer="1"/> +<smd name="P$5" x="0" y="0.95" dx="5.5" dy="4.7" layer="1"/> +<circle x="-2.7" y="-3.8" radius="0.22360625" width="0.127" layer="21"/> +<wire x1="-2.5" y1="3" x2="2.5" y2="3" width="0.127" layer="48"/> +<wire x1="2.5" y1="3" x2="2.5" y2="-3" width="0.127" layer="48"/> +<wire x1="2.5" y1="-3" x2="-2.5" y2="-3" width="0.127" layer="48"/> +<wire x1="-2.5" y1="-3" x2="-2.5" y2="3" width="0.127" layer="48"/> </package> -<package name="SON-5X6"> -<smd name="VIN" x="0" y="0" dx="3.3" dy="5.4" layer="1" cream="no"/> -<smd name="M1" x="-2.25" y="3.05" dx="0.5" dy="0.35" layer="1"/> -<smd name="M2" x="2.25" y="3.05" dx="0.5" dy="0.35" layer="1"/> -<smd name="M3" x="-2.25" y="-3.05" dx="0.5" dy="0.35" layer="1"/> -<smd name="M4" x="2.25" y="-3.05" dx="0.5" dy="0.35" layer="1"/> -<wire x1="-2.5" y1="3" x2="2.5" y2="3" width="0.127" layer="51"/> -<wire x1="2.5" y1="3" x2="2.5" y2="-3" width="0.127" layer="51"/> -<wire x1="2.5" y1="-3" x2="-2.5" y2="-3" width="0.127" layer="51"/> -<wire x1="-2.5" y1="-3" x2="-2.5" y2="3" width="0.127" layer="51"/> -<circle x="-1.7" y="3.3" radius="0.1" width="0.127" layer="21"/> -<smd name="GH" x="-2.5" y="2.5" dx="1" dy="0.25" layer="1"/> -<smd name="SH" x="-2.5" y="2" dx="1" dy="0.25" layer="1"/> -<smd name="VSW" x="-2.5" y="-0.5" dx="1" dy="4.3" layer="1"/> -<smd name="GL" x="2.5" y="2.5" dx="1" dy="0.25" layer="1"/> -<smd name="NC" x="2.5" y="2" dx="1" dy="0.25" layer="1"/> -<smd name="PGND" x="2.5" y="-0.5" dx="1" dy="4.3" layer="1"/> -<rectangle x1="-1.4" y1="0.2" x2="-0.2" y2="2.5" layer="31"/> -<rectangle x1="0.2" y1="0.2" x2="1.4" y2="2.5" layer="31"/> -<rectangle x1="-1.4" y1="-2.5" x2="-0.2" y2="-0.2" layer="31"/> -<rectangle x1="0.2" y1="-2.5" x2="1.4" y2="-0.2" layer="31"/> +<package name="QFN16-3X3-TI-RTE"> +<description>3x3 mm</description> +<wire x1="-1.5" y1="1.5" x2="1.5" y2="1.5" width="0.1016" layer="51"/> +<wire x1="1.5" y1="1.5" x2="1.5" y2="-1.5" width="0.1016" layer="51"/> +<wire x1="1.5" y1="-1.5" x2="-1.5" y2="-1.5" width="0.1016" layer="51"/> +<wire x1="-1.5" y1="-1.5" x2="-1.5" y2="1.5" width="0.1016" layer="51"/> +<wire x1="1.5" y1="1.5" x2="1.5" y2="1.025" width="0.1016" layer="21"/> +<wire x1="1.025" y1="1.5" x2="1.5" y2="1.5" width="0.1016" layer="21"/> +<wire x1="-1.5" y1="-1.5" x2="-1.5" y2="-1.025" width="0.1016" layer="21"/> +<wire x1="-1.025" y1="-1.5" x2="-1.5" y2="-1.5" width="0.1016" layer="21"/> +<wire x1="1.5" y1="-1.5" x2="1.025" y2="-1.5" width="0.1016" layer="21"/> +<wire x1="1.5" y1="-1.025" x2="1.5" y2="-1.5" width="0.1016" layer="21"/> +<circle x="-1.2" y="0.75" radius="0.125" width="0" layer="31"/> +<circle x="-1.2" y="0.75" radius="0.2" width="0" layer="29"/> +<circle x="-1.2" y="0.25" radius="0.125" width="0" layer="31"/> +<circle x="-1.2" y="0.25" radius="0.2" width="0" layer="29"/> +<circle x="-1.2" y="-0.25" radius="0.125" width="0" layer="31"/> +<circle x="-1.2" y="-0.75" radius="0.125" width="0" layer="31"/> +<circle x="-0.75" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="-0.25" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="0.25" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="0.75" y="-1.2" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="-0.75" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="-0.25" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="0.25" radius="0.125" width="0" layer="31"/> +<circle x="1.2" y="0.75" radius="0.125" width="0" layer="31"/> +<circle x="0.75" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="0.25" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="-0.25" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="-0.75" y="1.2" radius="0.125" width="0" layer="31"/> +<circle x="0" y="0" radius="0.15" width="0.01" layer="49"/> +<circle x="0.5" y="0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="0.5" y="-0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="-0.5" y="-0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="-0.5" y="0.5" radius="0.15" width="0.01" layer="49"/> +<circle x="-1.2" y="-0.25" radius="0.2" width="0" layer="29"/> +<circle x="-1.2" y="-0.75" radius="0.2" width="0" layer="29"/> +<circle x="-0.75" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="-0.25" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="0.25" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="0.75" y="-1.2" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="-0.75" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="-0.25" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="0.25" radius="0.2" width="0" layer="29"/> +<circle x="1.2" y="0.75" radius="0.2" width="0" layer="29"/> +<circle x="0.75" y="1.2" radius="0.2" width="0" layer="29"/> +<circle x="0.25" y="1.2" radius="0.2" width="0" layer="29"/> +<circle x="-0.25" y="1.2" radius="0.2" width="0" layer="29"/> +<circle x="-0.75" y="1.2" radius="0.2" width="0" layer="29"/> +<smd name="TH" x="0" y="0" dx="1.7" dy="1.7" layer="1" stop="no" cream="no"/> +<smd name="1" x="-1.475" y="0.75" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="2" x="-1.475" y="0.25" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="3" x="-1.475" y="-0.25" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="4" x="-1.475" y="-0.75" dx="0.85" dy="0.3" layer="1" roundness="75" stop="no" cream="no"/> +<smd name="5" x="-0.75" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="6" x="-0.25" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="7" x="0.25" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="8" x="0.75" y="-1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R90" stop="no" cream="no"/> +<smd name="9" x="1.475" y="-0.75" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="10" x="1.475" y="-0.25" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="11" x="1.475" y="0.25" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="12" x="1.475" y="0.75" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R180" stop="no" cream="no"/> +<smd name="13" x="0.75" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<smd name="14" x="0.25" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<smd name="15" x="-0.25" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<smd name="16" x="-0.75" y="1.475" dx="0.85" dy="0.3" layer="1" roundness="75" rot="R270" stop="no" cream="no"/> +<text x="-2" y="2" size="1.27" layer="25">>NAME</text> +<text x="-2" y="-3.5" size="1.27" layer="27">>VALUE</text> +<rectangle x1="-0.875" y1="-0.875" x2="0.875" y2="0.875" layer="29"/> +<rectangle x1="-0.8" y1="0.1" x2="-0.1" y2="0.8" layer="31" rot="R90"/> +<rectangle x1="-1.9" y1="0.55" x2="-1.2" y2="0.95" layer="29"/> +<rectangle x1="-1.85" y1="0.625" x2="-1.2" y2="0.875" layer="31"/> +<rectangle x1="-1.9" y1="0.05" x2="-1.2" y2="0.45" layer="29"/> +<rectangle x1="-1.85" y1="0.125" x2="-1.2" y2="0.375" layer="31"/> +<rectangle x1="-1.85" y1="-0.375" x2="-1.2" y2="-0.125" layer="31"/> +<rectangle x1="-1.85" y1="-0.875" x2="-1.2" y2="-0.625" layer="31"/> +<rectangle x1="-1.075" y1="-1.65" x2="-0.425" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="-0.575" y1="-1.65" x2="0.075" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="-0.075" y1="-1.65" x2="0.575" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="0.425" y1="-1.65" x2="1.075" y2="-1.4" layer="31" rot="R90"/> +<rectangle x1="1.2" y1="-0.875" x2="1.85" y2="-0.625" layer="31" rot="R180"/> +<rectangle x1="1.2" y1="-0.375" x2="1.85" y2="-0.125" layer="31" rot="R180"/> +<rectangle x1="1.2" y1="0.125" x2="1.85" y2="0.375" layer="31" rot="R180"/> +<rectangle x1="1.2" y1="0.625" x2="1.85" y2="0.875" layer="31" rot="R180"/> +<rectangle x1="0.425" y1="1.4" x2="1.075" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-0.075" y1="1.4" x2="0.575" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-0.575" y1="1.4" x2="0.075" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-1.075" y1="1.4" x2="-0.425" y2="1.65" layer="31" rot="R270"/> +<rectangle x1="-0.8" y1="-0.8" x2="-0.1" y2="-0.1" layer="31" rot="R180"/> +<rectangle x1="0.1" y1="-0.8" x2="0.8" y2="-0.1" layer="31" rot="R270"/> +<rectangle x1="0.1" y1="0.1" x2="0.8" y2="0.8" layer="31"/> +<rectangle x1="-1.9" y1="-0.45" x2="-1.2" y2="-0.05" layer="29"/> +<rectangle x1="-1.9" y1="-0.95" x2="-1.2" y2="-0.55" layer="29"/> +<rectangle x1="-1.1" y1="-1.75" x2="-0.4" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="-0.6" y1="-1.75" x2="0.1" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="-0.1" y1="-1.75" x2="0.6" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="0.4" y1="-1.75" x2="1.1" y2="-1.35" layer="29" rot="R90"/> +<rectangle x1="1.2" y1="-0.95" x2="1.9" y2="-0.55" layer="29" rot="R180"/> +<rectangle x1="1.2" y1="-0.45" x2="1.9" y2="-0.05" layer="29" rot="R180"/> +<rectangle x1="1.2" y1="0.05" x2="1.9" y2="0.45" layer="29" rot="R180"/> +<rectangle x1="1.2" y1="0.55" x2="1.9" y2="0.95" layer="29" rot="R180"/> +<rectangle x1="0.4" y1="1.35" x2="1.1" y2="1.75" layer="29" rot="R270"/> +<rectangle x1="-0.1" y1="1.35" x2="0.6" y2="1.75" layer="29" rot="R270"/> +<rectangle x1="-0.6" y1="1.35" x2="0.1" y2="1.75" layer="29" rot="R270"/> +<rectangle x1="-1.1" y1="1.35" x2="-0.4" y2="1.75" layer="29" rot="R270"/> +<wire x1="-1.5" y1="1.02" x2="-1.03" y2="1.5" width="0.127" layer="21"/> +<circle x="-2.06" y="1.24" radius="0.15" width="0.127" layer="21"/> </package> -<package name="BFC-UM"> -<pad name="P$1" x="-4.9784" y="0" drill="2.032" diameter="3.81"/> -<pad name="P$2" x="4.9784" y="0" drill="2.032" diameter="3.81"/> -<circle x="0" y="0" radius="9.9822" width="0.127" layer="21"/> -<text x="-2.54" y="3.81" size="1.27" layer="25">>NAME</text> -<text x="-2.54" y="-5.08" size="1.27" layer="27">>VALUE</text> +<package name="744777920-INDUCTOR"> +<smd name="P$1" x="0" y="3" dx="1.7" dy="2" layer="1"/> +<smd name="P$2" x="0" y="-3" dx="1.7" dy="2" layer="1"/> +<wire x1="-4" y1="0" x2="-4" y2="3" width="0.127" layer="21"/> +<wire x1="-4" y1="3" x2="-3" y2="4" width="0.127" layer="21" curve="-90"/> +<wire x1="-3" y1="4" x2="3" y2="4" width="0.127" layer="21"/> +<wire x1="3" y1="4" x2="4" y2="3" width="0.127" layer="21" curve="-90"/> +<wire x1="4" y1="3" x2="4" y2="-3" width="0.127" layer="21"/> +<wire x1="4" y1="-3" x2="3" y2="-4" width="0.127" layer="21" curve="-90"/> +<wire x1="3" y1="-4" x2="-3" y2="-4" width="0.127" layer="21"/> +<wire x1="-3" y1="-4" x2="-4" y2="-3" width="0.127" layer="21" curve="-90"/> +<wire x1="-4" y1="-3" x2="-4" y2="0" width="0.127" layer="21"/> +<rectangle x1="-4" y1="-4" x2="4" y2="4" layer="39"/> +<text x="5.08" y="2.54" size="1.016" layer="25">>NAME</text> +<text x="5.08" y="1.27" size="1.016" layer="27">>VALUE</text> </package> -<package name="BFC-8MM"> -<pad name="P$1" x="-1.75" y="0" drill="1" diameter="1.9304"/> -<pad name="P$2" x="1.75" y="0" drill="1" diameter="1.9304"/> -<circle x="0" y="0" radius="4" width="0.127" layer="21"/> -<text x="-1" y="2" size="0.4064" layer="25">>NAME</text> -<text x="-1" y="-2" size="0.4064" layer="27">>VALUE</text> +<package name="0805"> +<smd name="1" x="-0.95" y="0" dx="0.7" dy="1.2" layer="1"/> +<smd name="2" x="0.95" y="0" dx="0.7" dy="1.2" layer="1"/> +<text x="-0.762" y="0.8255" size="1.016" layer="25">>NAME</text> +<text x="-1.016" y="-2.032" size="1.016" layer="27">>VALUE</text> </package> -<package name="PWRPAD_3-25MM-SKINNY"> -<pad name="P$1" x="0" y="0" drill="3.25" diameter="5.35" thermals="no"/> +<package name="0603-RES"> +<wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/> +<wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/> +<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/> +<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/> +<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/> +<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/> +<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/> +<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/> +<text x="-0.889" y="1.397" size="1.016" layer="25">>NAME</text> +<text x="-1.016" y="-2.413" size="1.016" layer="27" ratio="10">>VALUE</text> +<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/> +<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/> +<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/> +<rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/> +</package> +<package name="SPM6530-IND"> +<smd name="1" x="0" y="2.775" dx="3.4" dy="1.85" layer="1"/> +<smd name="2" x="0" y="-2.775" dx="3.4" dy="1.85" layer="1"/> +<wire x1="-3.25" y1="3.85" x2="-3.25" y2="-3.85" width="0.127" layer="21"/> +<wire x1="-3.25" y1="-3.85" x2="3.25" y2="-3.85" width="0.127" layer="21"/> +<wire x1="3.25" y1="-3.85" x2="3.25" y2="3.85" width="0.127" layer="21"/> +<wire x1="3.25" y1="3.85" x2="-3.25" y2="3.85" width="0.127" layer="21"/> +<text x="3.81" y="2.54" size="1.016" layer="25">>NAME</text> +<text x="3.81" y="-3.81" size="1.016" layer="27">>VALUE</text> +</package> +<package name="IHLP-5050FD-01-IND"> +<smd name="1" x="0" y="5.4102" dx="4.953" dy="2.9464" layer="1"/> +<smd name="2" x="0" y="-5.4102" dx="4.953" dy="2.9464" layer="1"/> +<wire x1="6.4516" y1="6.604" x2="6.4516" y2="-6.604" width="0.127" layer="21"/> +<wire x1="3.81" y1="-6.604" x2="6.4516" y2="-6.604" width="0.127" layer="21"/> +<wire x1="6.4516" y1="6.604" x2="3.81" y2="6.604" width="0.127" layer="21"/> +<wire x1="-3.81" y1="6.604" x2="-6.4516" y2="6.604" width="0.127" layer="21"/> +<wire x1="-6.4516" y1="6.604" x2="-6.4516" y2="-6.604" width="0.127" layer="21"/> +<wire x1="-6.4516" y1="-6.604" x2="-3.81" y2="-6.604" width="0.127" layer="21"/> +<text x="5.08" y="7.62" size="1.016" layer="25">>NAME</text> +<text x="5.08" y="-8.89" size="1.016" layer="27">>VALUE</text> +</package> +<package name="7443340330-IND"> +<smd name="P$1" x="0" y="3.35" dx="3" dy="2.3" layer="1"/> +<smd name="P$2" x="0" y="-3.35" dx="3" dy="2.3" layer="1"/> +<wire x1="-2" y1="4" x2="-4" y2="4" width="0.127" layer="21"/> +<wire x1="-4" y1="4" x2="-4" y2="-4" width="0.127" layer="21"/> +<wire x1="-4" y1="-4" x2="-2" y2="-4" width="0.127" layer="21"/> +<wire x1="2" y1="-4" x2="4" y2="-4" width="0.127" layer="21"/> +<wire x1="4" y1="-4" x2="4" y2="4" width="0.127" layer="21"/> +<wire x1="4" y1="4" x2="2" y2="4" width="0.127" layer="21"/> +<text x="3" y="5" size="1.016" layer="25">>NAME</text> +<text x="3" y="-6" size="1.016" layer="27">>VALUE</text> +<rectangle x1="-1.15" y1="2.95" x2="1.15" y2="4.45" layer="51"/> +<rectangle x1="-1.15" y1="-4.45" x2="1.15" y2="-2.95" layer="51"/> +</package> +<package name="0402-RES"> +<description><b>CAPACITOR</b><p> +chip</description> +<wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/> +<wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/> +<wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/> +<wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/> +<wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/> +<wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/> +<smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/> +<smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/> +<text x="-0.889" y="0.6985" size="1.016" layer="25">>NAME</text> +<text x="-1.0795" y="-1.778" size="1.016" layer="27">>VALUE</text> +<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/> +<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/> +<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/> +<rectangle x1="-0.2032" y1="-0.3556" x2="0.2032" y2="0.3556" layer="21"/> +</package> +<package name="8X8-IND"> +<smd name="1" x="0" y="3.2" dx="2.2" dy="1.6" layer="1"/> +<smd name="2" x="0" y="-3.2" dx="2.2" dy="1.6" layer="1"/> +<wire x1="2" y1="-4" x2="4" y2="-4" width="0.127" layer="21"/> +<wire x1="4" y1="-4" x2="4" y2="4" width="0.127" layer="21"/> +<wire x1="4" y1="4" x2="2" y2="4" width="0.127" layer="21"/> +<wire x1="-2" y1="4" x2="-4" y2="4" width="0.127" layer="21"/> +<wire x1="-4" y1="4" x2="-4" y2="-4" width="0.127" layer="21"/> +<wire x1="-4" y1="-4" x2="-2" y2="-4" width="0.127" layer="21"/> +<text x="-5" y="5" size="1.27" layer="25">>NAME</text> +<text x="-5" y="-6" size="1.27" layer="27">>VALUE</text> +<rectangle x1="-3.81" y1="-3.81" x2="3.81" y2="3.81" layer="39"/> +</package> +<package name="744029100-IND"> +<smd name="1" x="0" y="1.1" dx="3.2" dy="1" layer="1"/> +<smd name="2" x="0" y="-1.1" dx="3.2" dy="1" layer="1"/> +<wire x1="-2" y1="2" x2="-2" y2="-2" width="0.127" layer="21"/> +<wire x1="-2" y1="-2" x2="2" y2="-2" width="0.127" layer="21"/> +<wire x1="2" y1="-2" x2="2" y2="2" width="0.127" layer="21"/> +<wire x1="2" y1="2" x2="-2" y2="2" width="0.127" layer="21"/> +<text x="-3" y="2.3" size="1.27" layer="25">>NAME</text> +<text x="-3" y="-3.6" size="1.27" layer="27">>VALUE</text> +</package> +<package name="7447709470-IND"> +<smd name="1" x="0" y="4.95" dx="5.4" dy="2.9" layer="1"/> +<smd name="2" x="0" y="-4.95" dx="5.4" dy="2.9" layer="1"/> +<wire x1="-3" y1="6" x2="-6" y2="6" width="0.127" layer="21"/> +<wire x1="-6" y1="6" x2="-6" y2="-6" width="0.127" layer="21"/> +<wire x1="-6" y1="-6" x2="-3" y2="-6" width="0.127" layer="21"/> +<wire x1="3" y1="-6" x2="6" y2="-6" width="0.127" layer="21"/> +<wire x1="6" y1="-6" x2="6" y2="6" width="0.127" layer="21"/> +<wire x1="6" y1="6" x2="3" y2="6" width="0.127" layer="21"/> +<text x="-7" y="8" size="1.27" layer="25">>NAME</text> +<text x="-7" y="-9" size="1.27" layer="27">>VALUE</text> +</package> +<package name="7447789002-IND"> +<smd name="1" x="0" y="3" dx="1.7" dy="2" layer="1"/> +<smd name="2" x="0" y="-3" dx="1.7" dy="2" layer="1"/> +<wire x1="2" y1="-4" x2="4" y2="-4" width="0.127" layer="21"/> +<wire x1="4" y1="-4" x2="4" y2="4" width="0.127" layer="21"/> +<wire x1="4" y1="4" x2="2" y2="4" width="0.127" layer="21"/> +<wire x1="-2" y1="4" x2="-4" y2="4" width="0.127" layer="21"/> +<wire x1="-4" y1="4" x2="-4" y2="-4" width="0.127" layer="21"/> +<wire x1="-4" y1="-4" x2="-2" y2="-4" width="0.127" layer="21"/> +<text x="-5" y="5" size="1.27" layer="25">>NAME</text> +<text x="-5" y="-6" size="1.27" layer="27">>VALUE</text> +<rectangle x1="-3.81" y1="-3.81" x2="3.81" y2="3.81" layer="39"/> +</package> +<package name="NRS5020T4R7MMGJ"> +<smd name="1" x="0" y="1.65" dx="4.9" dy="1.5" layer="1"/> +<smd name="2" x="0" y="-1.65" dx="4.9" dy="1.5" layer="1"/> +<text x="-3" y="2.8" size="1.27" layer="25">>NAME</text> +<text x="-3.1" y="-4" size="1.27" layer="27">>VALUE</text> +</package> +<package name="SOT23-5"> +<description><b>Small Outline Transistor</b>, 5 lead</description> +<wire x1="-1.544" y1="0.713" x2="1.544" y2="0.713" width="0.1524" layer="21"/> +<wire x1="1.544" y1="0.713" x2="1.544" y2="-0.712" width="0.1524" layer="21"/> +<wire x1="1.544" y1="-0.712" x2="-1.544" y2="-0.712" width="0.1524" layer="21"/> +<wire x1="-1.544" y1="-0.712" x2="-1.544" y2="0.713" width="0.1524" layer="21"/> +<smd name="5" x="-0.95" y="1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="4" x="0.95" y="1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="1" x="-0.95" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="2" x="0" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/> +<smd name="3" x="0.95" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/> +<text x="-1.778" y="-1.778" size="1.27" layer="25" ratio="10" rot="R90">>NAME</text> +<text x="3.048" y="-1.778" size="1.27" layer="27" ratio="10" rot="R90">>VALUE</text> +<rectangle x1="-1.1875" y1="0.7126" x2="-0.7125" y2="1.5439" layer="51"/> +<rectangle x1="0.7125" y1="0.7126" x2="1.1875" y2="1.5439" layer="51"/> +<rectangle x1="-1.1875" y1="-1.5437" x2="-0.7125" y2="-0.7124" layer="51"/> +<rectangle x1="-0.2375" y1="-1.5437" x2="0.2375" y2="-0.7124" layer="51"/> +<rectangle x1="0.7125" y1="-1.5437" x2="1.1875" y2="-0.7124" layer="51"/> +</package> +<package name="SL-LINK"> +<smd name="1" x="-0.1" y="0" dx="0.3" dy="0.3" layer="1"/> +<smd name="2" x="0.1" y="0" dx="0.3" dy="0.3" layer="1"/> </package> </packages> <symbols> @@ -1262,32 +1370,6 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <pin name="B" x="-7.62" y="0" visible="off" length="short" direction="pas" swaplevel="1"/> <pin name="A" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/> </symbol> -<symbol name="INTEGRATED_HALF-CSD88599"> -<pin name="GH" x="-20.32" y="10.16" length="middle"/> -<pin name="SH" x="-20.32" y="0" length="middle"/> -<pin name="GL" x="-20.32" y="-10.16" length="middle"/> -<pin name="GND" x="0" y="-25.4" length="middle" rot="R90"/> -<pin name="VIN" x="0" y="24.13" length="middle" rot="R270"/> -<pin name="VSW" x="15.24" y="0" length="middle" rot="R180"/> -<wire x1="-15.24" y1="-20.32" x2="-15.24" y2="19.05" width="0.254" layer="94"/> -<wire x1="-15.24" y1="19.05" x2="10.16" y2="19.05" width="0.254" layer="94"/> -<wire x1="10.16" y1="19.05" x2="10.16" y2="-20.32" width="0.254" layer="94"/> -<wire x1="10.16" y1="-20.32" x2="-15.24" y2="-20.32" width="0.254" layer="94"/> -<wire x1="0" y1="12.7" x2="0" y2="8.89" width="0.254" layer="94"/> -<wire x1="0" y1="8.89" x2="-1.27" y2="8.89" width="0.254" layer="94"/> -<wire x1="-1.27" y1="7.62" x2="0" y2="7.62" width="0.254" layer="94"/> -<wire x1="-1.27" y1="6.35" x2="0" y2="6.35" width="0.254" layer="94"/> -<wire x1="0" y1="6.35" x2="0" y2="-6.35" width="0.254" layer="94"/> -<wire x1="0" y1="-6.35" x2="-1.27" y2="-6.35" width="0.254" layer="94"/> -<wire x1="-1.27" y1="-7.62" x2="0" y2="-7.62" width="0.254" layer="94"/> -<wire x1="-1.27" y1="-8.89" x2="0" y2="-8.89" width="0.254" layer="94"/> -<wire x1="0" y1="-8.89" x2="0" y2="-12.7" width="0.254" layer="94"/> -<wire x1="-8.89" y1="-10.16" x2="-2.54" y2="-10.16" width="0.254" layer="94"/> -<wire x1="-2.54" y1="-10.16" x2="-2.54" y2="-6.35" width="0.254" layer="94"/> -<wire x1="-8.89" y1="0" x2="2.54" y2="0" width="0.254" layer="94"/> -<wire x1="-2.54" y1="8.89" x2="-2.54" y2="6.35" width="0.254" layer="94"/> -<wire x1="-2.54" y1="6.35" x2="-8.89" y2="6.35" width="0.254" layer="94"/> -</symbol> <symbol name="C-US"> <wire x1="0" y1="-2.54" x2="0" y2="2.54" width="0.254" layer="94"/> <wire x1="1.016" y1="0" x2="2.54" y2="0" width="0.1524" layer="94"/> @@ -1298,16 +1380,104 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <pin name="1" x="-2.54" y="0" visible="off" length="short" direction="pas" swaplevel="1"/> <pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/> </symbol> -</symbols> -<devicesets> -<deviceset name="PWRPAD" prefix="J"> -<gates> -<gate name="G$1" symbol="PWRPAD" x="0" y="0"/> -</gates> -<devices> -<device name="SC-02_2-45MM" package="PWRPAD_SC-02_2-45MM"> -<connects> -<connect gate="G$1" pin="PWRPAD" pad="P$1"/> +<symbol name="NFET-TPW4R008NH"> +<description>MOSFET N-channel - Enhancement mode</description> +<wire x1="0.762" y1="0.762" x2="0.762" y2="0" width="0.254" layer="94"/> +<wire x1="0.762" y1="0" x2="0.762" y2="-0.762" width="0.254" layer="94"/> +<wire x1="0.762" y1="3.175" x2="0.762" y2="2.54" width="0.254" layer="94"/> +<wire x1="0.762" y1="2.54" x2="0.762" y2="1.905" width="0.254" layer="94"/> +<wire x1="0.762" y1="0" x2="2.54" y2="0" width="0.1524" layer="94"/> +<wire x1="2.54" y1="0" x2="2.54" y2="-2.54" width="0.1524" layer="94"/> +<wire x1="0.762" y1="-1.905" x2="0.762" y2="-2.54" width="0.254" layer="94"/> +<wire x1="0.762" y1="-2.54" x2="0.762" y2="-3.175" width="0.254" layer="94"/> +<wire x1="0" y1="2.54" x2="0" y2="-2.54" width="0.254" layer="94"/> +<wire x1="2.54" y1="-2.54" x2="0.762" y2="-2.54" width="0.1524" layer="94"/> +<wire x1="3.81" y1="2.54" x2="3.81" y2="0.508" width="0.1524" layer="94"/> +<wire x1="3.81" y1="0.508" x2="3.81" y2="-0.508" width="0.1524" layer="94"/> +<wire x1="3.81" y1="-0.508" x2="3.81" y2="-2.54" width="0.1524" layer="94"/> +<wire x1="2.54" y1="-2.54" x2="3.81" y2="-2.54" width="0.1524" layer="94"/> +<wire x1="0.762" y1="2.54" x2="3.81" y2="2.54" width="0.1524" layer="94"/> +<circle x="2.54" y="-2.54" radius="0.254" width="0" layer="94"/> +<circle x="2.54" y="2.54" radius="0.254" width="0" layer="94"/> +<text x="-11.43" y="3.81" size="1.778" layer="96" rot="MR180">>VALUE</text> +<text x="-11.43" y="1.27" size="1.778" layer="95" rot="MR180">>NAME</text> +<pin name="S" x="2.54" y="-5.08" visible="off" length="short" direction="pas" rot="R90"/> +<pin name="G" x="-2.54" y="-2.54" visible="off" length="short" direction="pas"/> +<pin name="D" x="2.54" y="5.08" visible="off" length="short" direction="pas" rot="R270"/> +<polygon width="0.1524" layer="94"> +<vertex x="1.016" y="0"/> +<vertex x="2.032" y="0.508"/> +<vertex x="2.032" y="-0.508"/> +</polygon> +<polygon width="0.1524" layer="94"> +<vertex x="3.81" y="0.508"/> +<vertex x="3.302" y="-0.254"/> +<vertex x="4.318" y="-0.254"/> +</polygon> +<wire x1="3.302" y1="0.508" x2="3.81" y2="0.508" width="0.1524" layer="94"/> +<wire x1="3.81" y1="0.508" x2="4.318" y2="0.508" width="0.1524" layer="94"/> +</symbol> +<symbol name="BUCK-TS30011-12-13"> +<pin name="BST" x="15.24" y="10.16" length="middle" rot="R180"/> +<pin name="VSW" x="15.24" y="2.54" length="middle" rot="R180"/> +<pin name="PG" x="15.24" y="-7.62" length="middle" rot="R180"/> +<pin name="VCC" x="-15.24" y="10.16" length="middle"/> +<pin name="EN" x="-15.24" y="2.54" length="middle"/> +<pin name="GND" x="-15.24" y="-5.08" length="middle"/> +<pin name="PGND" x="-15.24" y="-7.62" length="middle"/> +<wire x1="-10.16" y1="12.7" x2="-10.16" y2="-10.16" width="0.254" layer="94"/> +<wire x1="-10.16" y1="-10.16" x2="10.16" y2="-10.16" width="0.254" layer="94"/> +<wire x1="10.16" y1="-10.16" x2="10.16" y2="12.7" width="0.254" layer="94"/> +<wire x1="10.16" y1="12.7" x2="-10.16" y2="12.7" width="0.254" layer="94"/> +<pin name="FB" x="15.24" y="-5.08" length="middle" rot="R180"/> +<text x="-2.54" y="12.7" size="1.27" layer="95">>NAME</text> +<text x="-2.54" y="-12.7" size="1.27" layer="96">>VALUE</text> +</symbol> +<symbol name="INDUCTOR"> +<wire x1="0" y1="5.08" x2="1.27" y2="3.81" width="0.254" layer="94" curve="-90" cap="flat"/> +<wire x1="0" y1="2.54" x2="1.27" y2="3.81" width="0.254" layer="94" curve="90" cap="flat"/> +<wire x1="0" y1="2.54" x2="1.27" y2="1.27" width="0.254" layer="94" curve="-90" cap="flat"/> +<wire x1="0" y1="0" x2="1.27" y2="1.27" width="0.254" layer="94" curve="90" cap="flat"/> +<wire x1="0" y1="0" x2="1.27" y2="-1.27" width="0.254" layer="94" curve="-90" cap="flat"/> +<wire x1="0" y1="-2.54" x2="1.27" y2="-1.27" width="0.254" layer="94" curve="90" cap="flat"/> +<wire x1="0" y1="-2.54" x2="1.27" y2="-3.81" width="0.254" layer="94" curve="-90" cap="flat"/> +<wire x1="0" y1="-5.08" x2="1.27" y2="-3.81" width="0.254" layer="94" curve="90" cap="flat"/> +<text x="-1.27" y="-5.08" size="1.778" layer="95" rot="R90">>NAME</text> +<text x="3.81" y="-5.08" size="1.778" layer="96" rot="R90">>VALUE</text> +<pin name="2" x="0" y="-7.62" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/> +<pin name="1" x="0" y="7.62" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/> +<text x="6.35" y="-5.08" size="1.27" layer="97" rot="R90">>PACKAGE</text> +</symbol> +<symbol name="VREG-AP2112"> +<pin name="VIN" x="-12.7" y="2.54" length="middle"/> +<pin name="EN" x="-12.7" y="-2.54" length="middle"/> +<pin name="GND" x="0" y="-10.16" length="middle" rot="R90"/> +<pin name="VOUT" x="12.7" y="2.54" length="middle" rot="R180"/> +<wire x1="-7.62" y1="5.08" x2="-7.62" y2="-5.08" width="0.254" layer="94"/> +<wire x1="-7.62" y1="-5.08" x2="7.62" y2="-5.08" width="0.254" layer="94"/> +<wire x1="7.62" y1="-5.08" x2="7.62" y2="5.08" width="0.254" layer="94"/> +<wire x1="7.62" y1="5.08" x2="-7.62" y2="5.08" width="0.254" layer="94"/> +<text x="-2.54" y="7.62" size="1.27" layer="95">>NAME</text> +<text x="2.54" y="-7.62" size="1.27" layer="96">>VALUE</text> +</symbol> +<symbol name="SL-LINK"> +<pin name="P$1" x="-12.7" y="0" length="middle"/> +<pin name="P$2" x="12.7" y="0" length="middle" rot="R180"/> +<wire x1="-7.62" y1="-2.54" x2="-7.62" y2="2.54" width="0.254" layer="94"/> +<wire x1="-7.62" y1="2.54" x2="7.62" y2="2.54" width="0.254" layer="94"/> +<wire x1="7.62" y1="2.54" x2="7.62" y2="-2.54" width="0.254" layer="94"/> +<wire x1="7.62" y1="-2.54" x2="-7.62" y2="-2.54" width="0.254" layer="94"/> +</symbol> +</symbols> +<devicesets> +<deviceset name="PWRPAD" prefix="J"> +<gates> +<gate name="G$1" symbol="PWRPAD" x="0" y="0"/> +</gates> +<devices> +<device name="SC-02_2-45MM" package="PWRPAD_SC-02_2-45MM"> +<connects> +<connect gate="G$1" pin="PWRPAD" pad="P$1"/> </connects> <technologies> <technology name=""/> @@ -1345,7 +1515,7 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <technology name=""/> </technologies> </device> -<device name="" package="PWRPAD_M3-PEM-MOUNT"> +<device name="M3-STANDOFF" package="PWRPAD_M3_STANDOFF"> <connects> <connect gate="G$1" pin="PWRPAD" pad="P$1"/> </connects> @@ -1361,6 +1531,14 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <technology name=""/> </technologies> </device> +<device name="M2.5_STANDOFF" package="PWRPAD_M25_STANDOFF"> +<connects> +<connect gate="G$1" pin="PWRPAD" pad="P$1"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> </devices> </deviceset> <deviceset name="DRV8302" prefix="U"> @@ -1465,19 +1643,24 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc </device> </devices> </deviceset> -<deviceset name="INTEGRATED_HALF-CSD88599"> +<deviceset name="BFC" prefix="BFC"> <gates> -<gate name="G$1" symbol="INTEGRATED_HALF-CSD88599" x="0" y="0"/> +<gate name="G$1" symbol="C-US" x="0" y="0"/> </gates> <devices> -<device name="SON" package="SON-5X6"> +<device name="" package="BFC-UM"> +<connects> +<connect gate="G$1" pin="1" pad="P$1"/> +<connect gate="G$1" pin="2" pad="P$2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="8MM" package="BFC-8MM"> <connects> -<connect gate="G$1" pin="GH" pad="GH"/> -<connect gate="G$1" pin="GL" pad="GL"/> -<connect gate="G$1" pin="GND" pad="PGND"/> -<connect gate="G$1" pin="SH" pad="SH"/> -<connect gate="G$1" pin="VIN" pad="VIN"/> -<connect gate="G$1" pin="VSW" pad="VSW"/> +<connect gate="G$1" pin="1" pad="P$1"/> +<connect gate="G$1" pin="2" pad="P$2"/> </connects> <technologies> <technology name=""/> @@ -1485,12 +1668,51 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc </device> </devices> </deviceset> -<deviceset name="BFC" prefix="BFC"> +<deviceset name="NFET-TPW4R008NH" prefix="Q"> <gates> -<gate name="G$1" symbol="C-US" x="0" y="0"/> +<gate name="1" symbol="NFET-TPW4R008NH" x="0" y="0"/> </gates> <devices> -<device name="" package="BFC-UM"> +<device name="" package="DSOP-ADVANCE"> +<connects> +<connect gate="1" pin="D" pad="P$5"/> +<connect gate="1" pin="G" pad="P$4"/> +<connect gate="1" pin="S" pad="P$1 P$2 P$3"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> +<deviceset name="BUCK-TS30011-12-13" prefix="U"> +<gates> +<gate name="G$1" symbol="BUCK-TS30011-12-13" x="0" y="0"/> +</gates> +<devices> +<device name="QFN" package="QFN16-3X3-TI-RTE"> +<connects> +<connect gate="G$1" pin="BST" pad="10"/> +<connect gate="G$1" pin="EN" pad="9"/> +<connect gate="G$1" pin="FB" pad="5"/> +<connect gate="G$1" pin="GND" pad="4 TH"/> +<connect gate="G$1" pin="PG" pad="8"/> +<connect gate="G$1" pin="PGND" pad="14 15"/> +<connect gate="G$1" pin="VCC" pad="2 3 11"/> +<connect gate="G$1" pin="VSW" pad="1 12 13 16"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> +<deviceset name="INDUCTOR" prefix="L" uservalue="yes"> +<gates> +<gate name="G$1" symbol="INDUCTOR" x="0" y="0"/> +</gates> +<devices> +<device name="-744777920" package="744777920-INDUCTOR"> <connects> <connect gate="G$1" pin="1" pad="P$1"/> <connect gate="G$1" pin="2" pad="P$2"/> @@ -1499,12 +1721,144 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</desc <technology name=""/> </technologies> </device> -<device name="8MM" package="BFC-8MM"> +<device name="-0805" package="0805"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PACKAGE" value="0805"/> +</technology> +</technologies> +</device> +<device name="-0603" package="0603-RES"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PACKAGE" value="0603"/> +</technology> +</technologies> +</device> +<device name="-SPM6530" package="SPM6530-IND"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-IHLP-5050FD-01" package="IHLP-5050FD-01-IND"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-7443340330" package="7443340330-IND"> <connects> <connect gate="G$1" pin="1" pad="P$1"/> <connect gate="G$1" pin="2" pad="P$2"/> </connects> <technologies> +<technology name=""> +<attribute name="PACKAGE" value="7443340330"/> +</technology> +</technologies> +</device> +<device name="-0402" package="0402-RES"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PACKAGE" value="0402"/> +</technology> +</technologies> +</device> +<device name="-744778002" package="8X8-IND"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-744029100" package="744029100-IND"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-7447709470" package="7447709470-IND"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-7447789002" package="7447789002-IND"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="" package="NRS5020T4R7MMGJ"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> +<deviceset name="VREG-AP2112" prefix="U"> +<gates> +<gate name="G$1" symbol="VREG-AP2112" x="0" y="0"/> +</gates> +<devices> +<device name="" package="SOT23-5"> +<connects> +<connect gate="G$1" pin="EN" pad="3"/> +<connect gate="G$1" pin="GND" pad="2"/> +<connect gate="G$1" pin="VIN" pad="1"/> +<connect gate="G$1" pin="VOUT" pad="5"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> +<deviceset name="SL-LINK" prefix="J"> +<gates> +<gate name="1" symbol="SL-LINK" x="0" y="0"/> +</gates> +<devices> +<device name="" package="SL-LINK"> +<connects> +<connect gate="1" pin="P$1" pad="1"/> +<connect gate="1" pin="P$2" pad="2"/> +</connects> +<technologies> <technology name=""/> </technologies> </device> @@ -2677,59 +3031,848 @@ Silk outline shows header location. <text x="-1.397" y="0.762" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> <text x="-1.524" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> </package> -</packages> -<symbols> -<symbol name="CONN_06"> -<description><h3>6 Pin Connection</h3></description> -<wire x1="1.27" y1="-7.62" x2="-5.08" y2="-7.62" width="0.4064" layer="94"/> -<wire x1="-1.27" y1="0" x2="0" y2="0" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="-2.54" x2="0" y2="-2.54" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="-5.08" x2="0" y2="-5.08" width="0.6096" layer="94"/> -<wire x1="-5.08" y1="10.16" x2="-5.08" y2="-7.62" width="0.4064" layer="94"/> -<wire x1="1.27" y1="-7.62" x2="1.27" y2="10.16" width="0.4064" layer="94"/> -<wire x1="-5.08" y1="10.16" x2="1.27" y2="10.16" width="0.4064" layer="94"/> -<wire x1="-1.27" y1="5.08" x2="0" y2="5.08" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="2.54" x2="0" y2="2.54" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="7.62" x2="0" y2="7.62" width="0.6096" layer="94"/> -<text x="-5.08" y="-9.906" size="1.778" layer="96" font="vector">>VALUE</text> -<text x="-5.08" y="10.668" size="1.778" layer="95" font="vector">>NAME</text> -<pin name="1" x="5.08" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -<pin name="2" x="5.08" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -<pin name="3" x="5.08" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -<pin name="4" x="5.08" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -<pin name="5" x="5.08" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -<pin name="6" x="5.08" y="7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -</symbol> -<symbol name="CONN_02"> -<description><h3>2 Pin Connection</h3></description> -<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/> -<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/> -<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/> -<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/> -<wire x1="3.81" y1="-2.54" x2="3.81" y2="5.08" width="0.4064" layer="94"/> -<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/> -<text x="-2.54" y="-4.826" size="1.778" layer="96" font="vector">>VALUE</text> -<text x="-2.54" y="5.588" size="1.778" layer="95" font="vector">>NAME</text> -<pin name="1" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -<pin name="2" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> -</symbol> -<symbol name="CONN_08"> -<description><h3> 8 Pin Connection</h3></description> -<wire x1="1.27" y1="-10.16" x2="-5.08" y2="-10.16" width="0.4064" layer="94"/> -<wire x1="-1.27" y1="-2.54" x2="0" y2="-2.54" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="-5.08" x2="0" y2="-5.08" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="-7.62" x2="0" y2="-7.62" width="0.6096" layer="94"/> -<wire x1="-5.08" y1="12.7" x2="-5.08" y2="-10.16" width="0.4064" layer="94"/> -<wire x1="1.27" y1="-10.16" x2="1.27" y2="12.7" width="0.4064" layer="94"/> -<wire x1="-5.08" y1="12.7" x2="1.27" y2="12.7" width="0.4064" layer="94"/> -<wire x1="-1.27" y1="2.54" x2="0" y2="2.54" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="0" x2="0" y2="0" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="5.08" x2="0" y2="5.08" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="7.62" x2="0" y2="7.62" width="0.6096" layer="94"/> -<wire x1="-1.27" y1="10.16" x2="0" y2="10.16" width="0.6096" layer="94"/> -<text x="-5.08" y="-12.446" size="1.778" layer="96" font="vector">>VALUE</text> -<text x="-5.08" y="13.208" size="1.778" layer="95" font="vector">>NAME</text> -<pin name="1" x="5.08" y="-7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<package name="1X02"> +<description><h3>Plated Through Hole</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/> +<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/> +<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/> +<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/> +<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/> +<pad name="1" x="0" y="0" drill="1.143" diameter="1.8796" rot="R90"/> +<pad name="2" x="2.54" y="0" drill="1.143" diameter="1.8796" rot="R90"/> +<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="MOLEX-1X2"> +<description><h3>Molex 2-Pin Plated Through-Hole</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/> +<wire x1="3.81" y1="3.048" x2="3.81" y2="-2.54" width="0.127" layer="21"/> +<wire x1="3.81" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/> +<wire x1="3.81" y1="-2.54" x2="2.54" y2="-2.54" width="0.127" layer="21"/> +<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/> +<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/> +<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/> +<wire x1="0" y1="-1.27" x2="2.54" y2="-1.27" width="0.127" layer="21"/> +<wire x1="2.54" y1="-1.27" x2="2.54" y2="-2.54" width="0.127" layer="21"/> +<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="square"/> +<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796"/> +<text x="-1.27" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.794" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">>VALUE</text> +</package> +<package name="SCREWTERMINAL-3.5MM-2"> +<description><h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3> +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch: 3.5mm/138mil</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/> +<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="21"/> +<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="21"/> +<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="21"/> +<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/> +<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/> +<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/> +<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/> +<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/> +<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="5.25" y1="3.15" x2="5.75" y2="3.15" width="0.2032" layer="51"/> +<wire x1="5.75" y1="3.15" x2="5.75" y2="2.15" width="0.2032" layer="51"/> +<wire x1="5.75" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/> +<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/> +<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/> +<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="JST-2-SMD"> +<description><h3>JST-Right Angle Male Header SMT</h3> +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch: 2mm</li> +</ul></p> +<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +<li>JST_2MM_MALE</li> +</ul></p></description> +<wire x1="-4" y1="-1" x2="-4" y2="-4.5" width="0.2032" layer="21"/> +<wire x1="-4" y1="-4.5" x2="-3.2" y2="-4.5" width="0.2032" layer="21"/> +<wire x1="-3.2" y1="-4.5" x2="-3.2" y2="-2" width="0.2032" layer="21"/> +<wire x1="-3.2" y1="-2" x2="-2" y2="-2" width="0.2032" layer="21"/> +<wire x1="2" y1="-2" x2="3.2" y2="-2" width="0.2032" layer="21"/> +<wire x1="3.2" y1="-2" x2="3.2" y2="-4.5" width="0.2032" layer="21"/> +<wire x1="3.2" y1="-4.5" x2="4" y2="-4.5" width="0.2032" layer="21"/> +<wire x1="4" y1="-4.5" x2="4" y2="-1" width="0.2032" layer="21"/> +<wire x1="2" y1="3" x2="-2" y2="3" width="0.2032" layer="21"/> +<smd name="1" x="-1" y="-3.7" dx="1" dy="4.6" layer="1"/> +<smd name="2" x="1" y="-3.7" dx="1" dy="4.6" layer="1"/> +<smd name="NC1" x="-3.4" y="1.5" dx="3.4" dy="1.6" layer="1" rot="R90"/> +<smd name="NC2" x="3.4" y="1.5" dx="3.4" dy="1.6" layer="1" rot="R90"/> +<text x="-1.397" y="1.778" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.651" y="0.635" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X02_BIG"> +<description><h3>Plated Through Hole</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.15"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-1.27" y1="1.27" x2="-1.27" y2="-1.27" width="0.127" layer="21"/> +<wire x1="-1.27" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/> +<wire x1="5.08" y1="-1.27" x2="5.08" y2="1.27" width="0.127" layer="21"/> +<wire x1="5.08" y1="1.27" x2="-1.27" y2="1.27" width="0.127" layer="21"/> +<pad name="P$1" x="0" y="0" drill="1.0668"/> +<pad name="P$2" x="3.81" y="0" drill="1.0668"/> +<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="JST-2-SMD-VERT"> +<description><h3>JST-Vertical Male Header SMT </h3> +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch: 2mm</li> +</ul></p> +<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-4.1" y1="2.97" x2="4.2" y2="2.97" width="0.2032" layer="51"/> +<wire x1="4.2" y1="2.97" x2="4.2" y2="-2.13" width="0.2032" layer="51"/> +<wire x1="4.2" y1="-2.13" x2="-4.1" y2="-2.13" width="0.2032" layer="51"/> +<wire x1="-4.1" y1="-2.13" x2="-4.1" y2="2.97" width="0.2032" layer="51"/> +<wire x1="-4.1" y1="3" x2="4.2" y2="3" width="0.2032" layer="21"/> +<wire x1="4.2" y1="3" x2="4.2" y2="2.3" width="0.2032" layer="21"/> +<wire x1="-4.1" y1="3" x2="-4.1" y2="2.3" width="0.2032" layer="21"/> +<wire x1="2" y1="-2.1" x2="4.2" y2="-2.1" width="0.2032" layer="21"/> +<wire x1="4.2" y1="-2.1" x2="4.2" y2="-1.7" width="0.2032" layer="21"/> +<wire x1="-2" y1="-2.1" x2="-4.1" y2="-2.1" width="0.2032" layer="21"/> +<wire x1="-4.1" y1="-2.1" x2="-4.1" y2="-1.8" width="0.2032" layer="21"/> +<smd name="P$1" x="-3.4" y="0.27" dx="3" dy="1.6" layer="1" rot="R90"/> +<smd name="P$2" x="3.4" y="0.27" dx="3" dy="1.6" layer="1" rot="R90"/> +<smd name="VCC" x="-1" y="-2" dx="1" dy="5.5" layer="1"/> +<smd name="GND" x="1" y="-2" dx="1" dy="5.5" layer="1"/> +<text x="-3.81" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>Name</text> +<text x="-3.81" y="2.21" size="0.6096" layer="27" font="vector" ratio="20">>Value</text> +</package> +<package name="SCREWTERMINAL-5MM-2"> +<description><h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3> +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch: 5mm/197mil</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-3.1" y1="4.2" x2="8.1" y2="4.2" width="0.2032" layer="21"/> +<wire x1="8.1" y1="4.2" x2="8.1" y2="-2.3" width="0.2032" layer="21"/> +<wire x1="8.1" y1="-2.3" x2="8.1" y2="-3.3" width="0.2032" layer="21"/> +<wire x1="8.1" y1="-3.3" x2="-3.1" y2="-3.3" width="0.2032" layer="21"/> +<wire x1="-3.1" y1="-3.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/> +<wire x1="-3.1" y1="-2.3" x2="-3.1" y2="4.2" width="0.2032" layer="21"/> +<wire x1="8.1" y1="-2.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/> +<wire x1="-3.1" y1="-1.35" x2="-3.7" y2="-1.35" width="0.2032" layer="51"/> +<wire x1="-3.7" y1="-1.35" x2="-3.7" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="-3.7" y1="-2.35" x2="-3.1" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="8.1" y1="4" x2="8.7" y2="4" width="0.2032" layer="51"/> +<wire x1="8.7" y1="4" x2="8.7" y2="3" width="0.2032" layer="51"/> +<wire x1="8.7" y1="3" x2="8.1" y2="3" width="0.2032" layer="51"/> +<circle x="2.5" y="3.7" radius="0.2828" width="0.127" layer="51"/> +<pad name="1" x="0" y="0" drill="1.3" diameter="2.032" shape="square"/> +<pad name="2" x="5" y="0" drill="1.3" diameter="2.032"/> +<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X02_LOCK"> +<description><h3>Plated Through Hole - Locking Footprint</h3> +Holes are staggered by 0.005" from center to hold pins while soldering. +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/> +<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/> +<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/> +<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/> +<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/> +<pad name="1" x="-0.1778" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<pad name="2" x="2.7178" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/> +<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/> +<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="MOLEX-1X2_LOCK"> +<description><h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3> +Holes are offset from center by 0.005" to hold pins in place during soldering. +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/> +<wire x1="3.81" y1="3.048" x2="3.81" y2="-2.54" width="0.127" layer="21"/> +<wire x1="3.81" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/> +<wire x1="3.81" y1="-2.54" x2="2.54" y2="-2.54" width="0.127" layer="21"/> +<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/> +<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/> +<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/> +<wire x1="0" y1="-1.27" x2="2.54" y2="-1.27" width="0.127" layer="21"/> +<wire x1="2.54" y1="-1.27" x2="2.54" y2="-2.54" width="0.127" layer="21"/> +<pad name="1" x="-0.127" y="0" drill="1.016" diameter="1.8796" shape="square"/> +<pad name="2" x="2.667" y="0" drill="1.016" diameter="1.8796"/> +<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/> +<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/> +<text x="-1.27" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.794" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">>VALUE</text> +</package> +<package name="1X02_LOCK_LONGPADS"> +<description><h3>Plated Through Hole - Long Pads with Locking Footprint</h3> +Pins are staggered by 0.005" from center to hold pins in place while soldering. +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="1.651" y1="0" x2="0.889" y2="0" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0" x2="-1.016" y2="0" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0" x2="-1.27" y2="0.9906" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0.9906" x2="-0.9906" y2="1.27" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0" x2="-1.27" y2="-0.9906" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="-0.9906" x2="-0.9906" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="3.81" y1="0" x2="3.556" y2="0" width="0.2032" layer="21"/> +<wire x1="3.81" y1="0" x2="3.81" y2="-0.9906" width="0.2032" layer="21"/> +<wire x1="3.81" y1="-0.9906" x2="3.5306" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="3.81" y1="0" x2="3.81" y2="0.9906" width="0.2032" layer="21"/> +<wire x1="3.81" y1="0.9906" x2="3.5306" y2="1.27" width="0.2032" layer="21"/> +<pad name="1" x="-0.127" y="0" drill="1.016" shape="long" rot="R90"/> +<pad name="2" x="2.667" y="0" drill="1.016" shape="long" rot="R90"/> +<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/> +<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/> +<text x="-1.27" y="1.651" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.286" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="SCREWTERMINAL-3.5MM-2_LOCK"> +<description><h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3> +Holes are offset from center 0.005" to hold pins in place during soldering. +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch: 3.5mm/138mil</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="21"/> +<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="21"/> +<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="21"/> +<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/> +<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/> +<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/> +<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/> +<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/> +<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/> +<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/> +<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/> +<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/> +<circle x="0" y="0" radius="0.4318" width="0.0254" layer="51"/> +<circle x="3.5" y="0" radius="0.4318" width="0.0254" layer="51"/> +<pad name="1" x="-0.1778" y="0" drill="1.2" diameter="2.032" shape="square"/> +<pad name="2" x="3.6778" y="0" drill="1.2" diameter="2.032"/> +<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X02_LONGPADS"> +<description><h3>Plated Through Hole - Long Pads without Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/> +<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/> +<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.397" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X02_NO_SILK"> +<description><h3>Plated Through Hole - No Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="JST-2-PTH"> +<description><h3>JST 2 Pin Right Angle Plated Through Hole</h3> +tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch:2mm</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<pad name="1" x="-1" y="0" drill="0.7" diameter="1.6"/> +<pad name="2" x="1" y="0" drill="0.7" diameter="1.6"/> +<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text> +<text x="-1.27" y="2.73" size="0.6096" layer="27" font="vector" ratio="20">>Value</text> +<text x="0.6" y="0.7" size="1.27" layer="51">+</text> +<text x="-1.4" y="0.7" size="1.27" layer="51">-</text> +<wire x1="-2.95" y1="-1.6" x2="-2.95" y2="6" width="0.2032" layer="21"/> +<wire x1="-2.95" y1="6" x2="2.95" y2="6" width="0.2032" layer="21"/> +<wire x1="2.95" y1="6" x2="2.95" y2="-1.6" width="0.2032" layer="21"/> +<wire x1="-2.95" y1="-1.6" x2="-2.3" y2="-1.6" width="0.2032" layer="21"/> +<wire x1="2.95" y1="-1.6" x2="2.3" y2="-1.6" width="0.2032" layer="21"/> +<wire x1="-2.3" y1="-1.6" x2="-2.3" y2="0" width="0.2032" layer="21"/> +<wire x1="2.3" y1="-1.6" x2="2.3" y2="0" width="0.2032" layer="21"/> +</package> +<package name="1X02_XTRA_BIG"> +<description><h3>Plated Through Hole - 0.1" holes</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.2"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-5.08" y1="2.54" x2="-5.08" y2="-2.54" width="0.127" layer="21"/> +<wire x1="-5.08" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/> +<wire x1="5.08" y1="-2.54" x2="5.08" y2="2.54" width="0.127" layer="21"/> +<wire x1="5.08" y1="2.54" x2="-5.08" y2="2.54" width="0.127" layer="21"/> +<pad name="1" x="-2.54" y="0" drill="2.0574" diameter="3.556"/> +<pad name="2" x="2.54" y="0" drill="2.0574" diameter="3.556"/> +<text x="-5.08" y="2.667" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-5.08" y="-3.302" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X02_PP_HOLES_ONLY"> +<description><h3>Pogo Pins Connector - No Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/> +<circle x="2.54" y="0" radius="0.635" width="0.127" layer="51"/> +<pad name="1" x="0" y="0" drill="0.889" diameter="0.8128" rot="R90"/> +<pad name="2" x="2.54" y="0" drill="0.889" diameter="0.8128" rot="R90"/> +<hole x="0" y="0" drill="1.4732"/> +<hole x="2.54" y="0" drill="1.4732"/> +<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="SCREWTERMINAL-3.5MM-2-NS"> +<description><h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch: 3.5mm/138mil</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="51"/> +<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="51"/> +<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="51"/> +<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="51"/> +<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/> +<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="51"/> +<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/> +<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/> +<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/> +<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/> +<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/> +<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/> +<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/> +<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/> +<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/> +<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="JST-2-PTH-NS"> +<description><h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3> +tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. +<br> No silk outline of connector. +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch:2mm</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/> +<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/> +<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/> +<pad name="1" x="-1" y="0" drill="0.7" diameter="1.6"/> +<pad name="2" x="1" y="0" drill="0.7" diameter="1.6"/> +<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text> +<text x="-1.27" y="4" size="0.6096" layer="27" font="vector" ratio="20">>Value</text> +<text x="0.6" y="0.7" size="1.27" layer="51">+</text> +<text x="-1.4" y="0.7" size="1.27" layer="51">-</text> +</package> +<package name="JST-2-PTH-KIT"> +<description><h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3> +tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. +<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. +<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. +<p>Specifications: +<ul><li>Pin count: 2</li> +<li>Pin pitch:2mm</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/> +<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/> +<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/> +<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/> +<pad name="1" x="-1" y="0" drill="0.7" diameter="1.4478" stop="no"/> +<pad name="2" x="1" y="0" drill="0.7" diameter="1.4478" stop="no"/> +<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text> +<text x="-1.27" y="4" size="0.6096" layer="27" font="vector" ratio="20">>Value</text> +<text x="0.6" y="0.7" size="1.27" layer="51">+</text> +<text x="-1.4" y="0.7" size="1.27" layer="51">-</text> +<polygon width="0.127" layer="30"> +<vertex x="-0.9975" y="-0.6604" curve="-90.025935"/> +<vertex x="-1.6604" y="0" curve="-90.017354"/> +<vertex x="-1" y="0.6604" curve="-90"/> +<vertex x="-0.3396" y="0" curve="-90.078137"/> +</polygon> +<polygon width="0.127" layer="29"> +<vertex x="-1" y="-0.2865" curve="-90.08005"/> +<vertex x="-1.2865" y="0" curve="-90.040011"/> +<vertex x="-1" y="0.2865" curve="-90"/> +<vertex x="-0.7135" y="0" curve="-90"/> +</polygon> +<polygon width="0.127" layer="30"> +<vertex x="1.0025" y="-0.6604" curve="-90.025935"/> +<vertex x="0.3396" y="0" curve="-90.017354"/> +<vertex x="1" y="0.6604" curve="-90"/> +<vertex x="1.6604" y="0" curve="-90.078137"/> +</polygon> +<polygon width="0.127" layer="29"> +<vertex x="1" y="-0.2865" curve="-90.08005"/> +<vertex x="0.7135" y="0" curve="-90.040011"/> +<vertex x="1" y="0.2865" curve="-90"/> +<vertex x="1.2865" y="0" curve="-90"/> +</polygon> +</package> +<package name="SPRINGTERMINAL-2.54MM-2"> +<description><h3>Spring Terminal- PCB Mount 2 Pin PTH</h3> +tDocu marks the spring arms +<p>Specifications: +<ul><li>Pin count: 4</li> +<li>Pin pitch: 0.1"</li> +</ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<wire x1="-4.2" y1="7.88" x2="-4.2" y2="-2.8" width="0.254" layer="21"/> +<wire x1="-4.2" y1="-2.8" x2="-4.2" y2="-4.72" width="0.254" layer="51"/> +<wire x1="-4.2" y1="-4.72" x2="3.44" y2="-4.72" width="0.254" layer="51"/> +<wire x1="3.44" y1="-4.72" x2="3.44" y2="-2.8" width="0.254" layer="51"/> +<wire x1="3.44" y1="7.88" x2="-4.2" y2="7.88" width="0.254" layer="21"/> +<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="1"/> +<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="16"/> +<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="16"/> +<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="1"/> +<wire x1="-4.2" y1="-2.8" x2="3.44" y2="-2.8" width="0.254" layer="21"/> +<wire x1="3.44" y1="4" x2="3.44" y2="1" width="0.254" layer="21"/> +<wire x1="3.44" y1="7.88" x2="3.44" y2="6" width="0.254" layer="21"/> +<wire x1="3.44" y1="-0.9" x2="3.44" y2="-2.8" width="0.254" layer="21"/> +<pad name="1" x="0" y="0" drill="1.1" diameter="1.9"/> +<pad name="P$2" x="0" y="5.08" drill="1.1" diameter="1.9"/> +<pad name="P$3" x="2.54" y="5.08" drill="1.1" diameter="1.9"/> +<pad name="2" x="2.54" y="0" drill="1.1" diameter="1.9"/> +</package> +<package name="1X02_2.54_SCREWTERM"> +<description><h3>2 Pin Screw Terminal - 2.54mm</h3> +<p>Specifications: +<ul><li>Pin count:2</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_02</li> +</ul></p></description> +<pad name="P2" x="0" y="0" drill="1.016" shape="square"/> +<pad name="P1" x="2.54" y="0" drill="1.016" shape="square"/> +<wire x1="-1.5" y1="3.25" x2="4" y2="3.25" width="0.2032" layer="21"/> +<wire x1="4" y1="3.25" x2="4" y2="2.5" width="0.2032" layer="21"/> +<wire x1="4" y1="2.5" x2="4" y2="-3.25" width="0.2032" layer="21"/> +<wire x1="4" y1="-3.25" x2="-1.5" y2="-3.25" width="0.2032" layer="21"/> +<wire x1="-1.5" y1="-3.25" x2="-1.5" y2="2.5" width="0.2032" layer="21"/> +<wire x1="-1.5" y1="2.5" x2="-1.5" y2="3.25" width="0.2032" layer="21"/> +<wire x1="-1.5" y1="2.5" x2="4" y2="2.5" width="0.2032" layer="21"/> +<text x="-1.27" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-4.064" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X02_POKEHOME"> +<description>2 pin poke-home connector + +part number 2062-2P from STA</description> +<wire x1="-7" y1="-4" x2="-7" y2="2" width="0.2032" layer="21"/> +<wire x1="-7" y1="2" x2="-7" y2="4" width="0.2032" layer="21"/> +<wire x1="4.7" y1="4" x2="4.7" y2="-4" width="0.2032" layer="21"/> +<wire x1="4.7" y1="-4" x2="-7" y2="-4" width="0.2032" layer="21"/> +<smd name="P2" x="5.25" y="-2" dx="3.5" dy="2" layer="1"/> +<smd name="P1" x="5.25" y="2" dx="3.5" dy="2" layer="1"/> +<smd name="P4" x="-4" y="-2" dx="6" dy="2" layer="1"/> +<smd name="P3" x="-4" y="2" dx="6" dy="2" layer="1"/> +<wire x1="-7" y1="4" x2="4.7" y2="4" width="0.2032" layer="21"/> +<text x="0.635" y="-3.175" size="0.4064" layer="25">>NAME</text> +<text x="0.635" y="-1.905" size="0.4064" layer="27">>VALUE</text> +</package> +<package name="1X02_RA_PTH_FEMALE"> +<wire x1="-2.79" y1="4.25" x2="-2.79" y2="-4.25" width="0.1778" layer="21"/> +<text x="-1.397" y="0.762" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.524" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +<wire x1="2.79" y1="4.25" x2="2.79" y2="-4.25" width="0.1778" layer="21"/> +<wire x1="-2.79" y1="4.25" x2="2.79" y2="4.25" width="0.1778" layer="21"/> +<wire x1="-2.79" y1="-4.25" x2="2.79" y2="-4.25" width="0.1778" layer="21"/> +<pad name="2" x="-1.27" y="-5.85" drill="0.8"/> +<pad name="1" x="1.27" y="-5.85" drill="0.8"/> +</package> +<package name="1X01_LONGPAD"> +<description><h3>Plated Through Hole - Long Pad</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/> +<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/> +<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +</package> +<package name="1X01"> +<description><h3>Plated Through Hole</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<wire x1="1.27" y1="0.635" x2="0.635" y2="1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="1.27" x2="-0.635" y2="1.27" width="0.2032" layer="21"/> +<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="-0.635" y1="-1.27" x2="0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="1.27" y1="-0.635" x2="1.27" y2="0.635" width="0.2032" layer="21"/> +<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.524" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">>VALUE</text> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +</package> +<package name="1X01_2MM"> +<description><h3>Plated Through Hole - 2mm</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="2" diameter="3.302" rot="R90"/> +<text x="-1.651" y="1.778" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.651" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X01_OFFSET"> +<description><h3>Plated Through Hole - Long Pad w/ Offset Hole</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="-0.635" y1="-1.27" x2="0.635" y2="-1.27" width="0.2032" layer="21"/> +<wire x1="0.635" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/> +<wire x1="1.27" y1="-0.635" x2="1.27" y2="0.635" width="0.2032" layer="21"/> +<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="offset" rot="R90"/> +<text x="-1.27" y="3.048" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +</package> +<package name="1X01_POGOPIN_HOLE_0.061_DIA"> +<description><h3>Pogo Pin - 0.061"</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.061"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/> +<pad name="1" x="0" y="0" drill="0.9" diameter="0.8128" rot="R90" thermals="no"/> +<hole x="0" y="0" drill="1.5494"/> +<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X01_POGOPIN_HOLE_0.58_DIA"> +<description><h3>Pogo Pin Hole - 0.58" </h3> +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.58"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/> +<pad name="1" x="0" y="0" drill="0.9" diameter="0.8128" rot="R90" thermals="no"/> +<hole x="0" y="0" drill="1.4732"/> +<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="SNAP-FEMALE"> +<description><h3>Sew-On Fabric Snap - Female</h3> +Equivalent to size #1/0 snap. +<p>Specifications: +<ul><li>Pin count: 1</li> +<li>Area:8mm</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="2.921" diameter="4.572"/> +<polygon width="0.254" layer="1"> +<vertex x="-4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="4.0005" curve="-90.002865"/> +<vertex x="4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="-4.0005" curve="-89.997136"/> +</polygon> +<polygon width="0.3556" layer="29"> +<vertex x="-4.0005" y="0" curve="-90.002865"/> +<vertex x="0" y="4.0005" curve="-90.002865"/> +<vertex x="4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="-4.0005" curve="-89.997136"/> +</polygon> +<polygon width="0.3556" layer="31"> +<vertex x="-4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="4.0005" curve="-90.002865"/> +<vertex x="4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="-4.0005" curve="-89.997136"/> +</polygon> +<polygon width="0.3556" layer="41"> +<vertex x="-4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="4.0005" curve="-90.002865"/> +<vertex x="4.0005" y="0" curve="-89.997136"/> +<vertex x="0" y="-4.0005" curve="-89.997136"/> +</polygon> +<text x="-1.27" y="4.318" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-4.953" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="SNAP-MALE"> +<description><h3>Sew-On Fabric Snap - Male</h3> +Equivalent to size #1/0 snap. +<p>Specifications: +<ul><li>Pin count: 1</li> +<li>Area:8mm</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<smd name="2" x="0" y="0" dx="7.62" dy="7.62" layer="1" roundness="100"/> +<text x="-1.524" y="4.064" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.651" y="-4.826" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="SPRING-CONNECTOR"> +<description><h3>Spring Connector</h3> +<p>Specifications: +<ul><li>Pin count: 1</li> +<li>Area:0.25"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<smd name="P$2" x="0" y="0" dx="7.112" dy="7.112" layer="1" roundness="100"/> +<text x="-1.27" y="3.81" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.524" y="-4.572" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +<package name="1X01NS_KIT"> +<description><h3>Plated Through Hole - No Silk Outline Kit Version</h3> +<p> Mask on only one side to make soldering in kits easier. +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90" stop="no"/> +<circle x="0" y="0" radius="0.508" width="0" layer="29"/> +<circle x="0" y="0" radius="0.9398" width="0" layer="30"/> +<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.016" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">>VALUE</text> +</package> +<package name="1X01_NO_SILK"> +<description><h3>Plated Through Hole - No Silk Outline</h3> +<p>Specifications: +<ul><li>Pin count:1</li> +<li>Pin pitch:0.1"</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/> +<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> +</package> +<package name="SMTSO-256-ET-0.165DIA"> +<description><h3>SMTSO-256-ET Flush Mount Nut</h3> +.165 drill +<br> +Fits 4-40 Screws. +<p>Specifications: +<ul><li>Pin count: 1</li> +</ul></p> +<p>Example device(s): +<ul><li>CONN_01</li> +</ul></p></description> +<circle x="0" y="0" radius="1.016" width="0.127" layer="51"/> +<wire x1="-1.016" y1="2.286" x2="-2.286" y2="1.016" width="1.016" layer="31" curve="42.075022"/> +<wire x1="2.286" y1="1.016" x2="1.016" y2="2.286" width="1.016" layer="31" curve="42.075022"/> +<wire x1="1.016" y1="-2.286" x2="2.286" y2="-1.016" width="1.016" layer="31" curve="42.075022"/> +<wire x1="-2.286" y1="-1.016" x2="-1.016" y2="-2.286" width="1.016" layer="31" curve="42.075022"/> +<pad name="P$1" x="0" y="0" drill="4.191" diameter="6.1976"/> +<text x="-1.397" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text> +<text x="-1.524" y="-3.937" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text> +</package> +</packages> +<symbols> +<symbol name="CONN_06"> +<description><h3>6 Pin Connection</h3></description> +<wire x1="1.27" y1="-7.62" x2="-5.08" y2="-7.62" width="0.4064" layer="94"/> +<wire x1="-1.27" y1="0" x2="0" y2="0" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="-2.54" x2="0" y2="-2.54" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="-5.08" x2="0" y2="-5.08" width="0.6096" layer="94"/> +<wire x1="-5.08" y1="10.16" x2="-5.08" y2="-7.62" width="0.4064" layer="94"/> +<wire x1="1.27" y1="-7.62" x2="1.27" y2="10.16" width="0.4064" layer="94"/> +<wire x1="-5.08" y1="10.16" x2="1.27" y2="10.16" width="0.4064" layer="94"/> +<wire x1="-1.27" y1="5.08" x2="0" y2="5.08" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="2.54" x2="0" y2="2.54" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="7.62" x2="0" y2="7.62" width="0.6096" layer="94"/> +<text x="-5.08" y="-9.906" size="1.778" layer="96" font="vector">>VALUE</text> +<text x="-5.08" y="10.668" size="1.778" layer="95" font="vector">>NAME</text> +<pin name="1" x="5.08" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<pin name="2" x="5.08" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<pin name="3" x="5.08" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<pin name="4" x="5.08" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<pin name="5" x="5.08" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<pin name="6" x="5.08" y="7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +</symbol> +<symbol name="CONN_02"> +<description><h3>2 Pin Connection</h3></description> +<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/> +<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/> +<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/> +<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/> +<wire x1="3.81" y1="-2.54" x2="3.81" y2="5.08" width="0.4064" layer="94"/> +<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/> +<text x="-2.54" y="-4.826" size="1.778" layer="96" font="vector">>VALUE</text> +<text x="-2.54" y="5.588" size="1.778" layer="95" font="vector">>NAME</text> +<pin name="1" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +<pin name="2" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> +</symbol> +<symbol name="CONN_08"> +<description><h3> 8 Pin Connection</h3></description> +<wire x1="1.27" y1="-10.16" x2="-5.08" y2="-10.16" width="0.4064" layer="94"/> +<wire x1="-1.27" y1="-2.54" x2="0" y2="-2.54" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="-5.08" x2="0" y2="-5.08" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="-7.62" x2="0" y2="-7.62" width="0.6096" layer="94"/> +<wire x1="-5.08" y1="12.7" x2="-5.08" y2="-10.16" width="0.4064" layer="94"/> +<wire x1="1.27" y1="-10.16" x2="1.27" y2="12.7" width="0.4064" layer="94"/> +<wire x1="-5.08" y1="12.7" x2="1.27" y2="12.7" width="0.4064" layer="94"/> +<wire x1="-1.27" y1="2.54" x2="0" y2="2.54" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="0" x2="0" y2="0" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="5.08" x2="0" y2="5.08" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="7.62" x2="0" y2="7.62" width="0.6096" layer="94"/> +<wire x1="-1.27" y1="10.16" x2="0" y2="10.16" width="0.6096" layer="94"/> +<text x="-5.08" y="-12.446" size="1.778" layer="96" font="vector">>VALUE</text> +<text x="-5.08" y="13.208" size="1.778" layer="95" font="vector">>NAME</text> +<pin name="1" x="5.08" y="-7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> <pin name="2" x="5.08" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> <pin name="3" x="5.08" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> <pin name="4" x="5.08" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> @@ -2755,6 +3898,17 @@ Silk outline shows header location. <pin name="3" x="5.08" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> <pin name="4" x="5.08" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/> </symbol> +<symbol name="CONN_01"> +<description><h3>1 Pin Connection</h3></description> +<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/> +<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/> +<wire x1="-2.54" y1="2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/> +<wire x1="3.81" y1="-2.54" x2="3.81" y2="2.54" width="0.4064" layer="94"/> +<wire x1="-2.54" y1="2.54" x2="3.81" y2="2.54" width="0.4064" layer="94"/> +<text x="-2.54" y="-4.826" size="1.778" layer="96" font="vector">>VALUE</text> +<text x="-2.54" y="3.048" size="1.778" layer="95" font="vector">>NAME</text> +<pin name="1" x="7.62" y="0" visible="off" length="middle" direction="pas" swaplevel="1" rot="R180"/> +</symbol> </symbols> <devicesets> <deviceset name="JST_6_PIN_HORIZONTAL" prefix="J"> @@ -2781,25 +3935,282 @@ JST-SH type. <devices> <device name="" package="JST-6-SMD-HORI-1.0MM"> <connects> -<connect gate="A" pin="1" pad="1"/> -<connect gate="A" pin="2" pad="2"/> -<connect gate="A" pin="3" pad="3"/> -<connect gate="A" pin="4" pad="4"/> -<connect gate="A" pin="5" pad="5"/> -<connect gate="A" pin="6" pad="6"/> -<connect gate="B" pin="1" pad="M1"/> -<connect gate="B" pin="2" pad="M2"/> +<connect gate="A" pin="1" pad="1"/> +<connect gate="A" pin="2" pad="2"/> +<connect gate="A" pin="3" pad="3"/> +<connect gate="A" pin="4" pad="4"/> +<connect gate="A" pin="5" pad="5"/> +<connect gate="A" pin="6" pad="6"/> +<connect gate="B" pin="1" pad="M1"/> +<connect gate="B" pin="2" pad="M2"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="XXX-00000" constant="no"/> +<attribute name="VALUE" value="BM06B-SRSS-TB" constant="no"/> +</technology> +</technologies> +</device> +</devices> +</deviceset> +<deviceset name="CONN_08" prefix="J" uservalue="yes"> +<description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> + +<p></p> +<b>On any of the 0.1 inch spaced packages, you can populate with these:</b> +<ul> +<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> +<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> +<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> +<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> +<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> +<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li> +</ul> + +<p></p> +<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> +<ul> +<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> +</ul> + +<p></p> +<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> +<ul> +<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> +<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> +<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> +<p></p> +</ul> + +<p></p> +<b>Special notes:</b> +<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 +<p></p> +NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... +This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.</description> +<gates> +<gate name="G$1" symbol="CONN_08" x="-2.54" y="0"/> +</gates> +<devices> +<device name=""" package="1X08"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-08438"/> +</technology> +</technologies> +</device> +<device name="LOCK" package="1X08_LOCK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="LOCK_LONGPADS" package="1X08_LOCK_LONGPADS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="LONGPADS" package="1X08_LONGPADS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="3.5MM-8" package="SCREWTERMINAL-3.5MM-8"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="SMD-STRAIGHT-FEMALE" package="1X08_SMD"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-10204"/> +<attribute name="SF_ID" value="PRT-11543" constant="no"/> +</technology> +</technologies> +</device> +<device name="SMD-STRAIGHT-ALT-FEMALE" package="1X08_SMD_ALT"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="XXX-00000" constant="no"/> -<attribute name="VALUE" value="BM06B-SRSS-TB" constant="no"/> +<attribute name="PROD_ID" value="CONN-10204"/> +<attribute name="SF_ID" value="PRT-11543" constant="no"/> +</technology> +</technologies> +</device> +<device name="SMD-COMBO-FEMALE" package="1X08_SMD_COMBINED"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-10204"/> +<attribute name="SF_ID" value="PRT-11543" constant="no"/> +</technology> +</technologies> +</device> +<device name="BM08B-SRSS-TB" package="BM08B-SRSS-TB"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-10556" constant="no"/> +</technology> +</technologies> +</device> +<device name="SMD-MALE" package="1X08_SMD_MALE"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-11292"/> +<attribute name="SF_ID" value="PRT-11541" constant="no"/> +</technology> +</technologies> +</device> +<device name="NO_SILK_FEMALE_PTH" package="1X08_NO_SILK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-08438"/> +</technology> +</technologies> +</device> +<device name="LOCK_NO_SILK" package="1X08_LOCK_NO_SILK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="FEMALE_LOCK" package="1X08_FEMALE_LOCK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="5" pad="5"/> +<connect gate="G$1" pin="6" pad="6"/> +<connect gate="G$1" pin="7" pad="7"/> +<connect gate="G$1" pin="8" pad="8"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-09233" constant="no"/> +<attribute name="SF_ID" value="PRT-09279" constant="no"/> </technology> </technologies> </device> </devices> </deviceset> -<deviceset name="CONN_08" prefix="J" uservalue="yes"> +<deviceset name="CONN_04" prefix="J" uservalue="yes"> <description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> @@ -2810,7 +4221,6 @@ JST-SH type. <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> -<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li> </ul> <p></p> @@ -2830,233 +4240,239 @@ JST-SH type. <p></p> <b>Special notes:</b> -<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 -<p></p> -NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... -This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.</description> +<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208</description> <gates> -<gate name="G$1" symbol="CONN_08" x="-2.54" y="0"/> +<gate name="G$1" symbol="CONN_04" x="-2.54" y="0"/> </gates> <devices> -<device name=""" package="1X08"> +<device name="" package="1X04"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-08438"/> +<attribute name="PROD_ID" value="CONN-09696" constant="no"/> </technology> </technologies> </device> -<device name="LOCK" package="1X08_LOCK"> +<device name="POLAR" package="MOLEX-1X4"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> -<technology name=""/> +<technology name=""> +<attribute name="PROD_ID" value="CONN-08186" constant="no"/> +<attribute name="SF_ID" value="PRT-08231" constant="no"/> +</technology> </technologies> </device> -<device name="LOCK_LONGPADS" package="1X08_LOCK_LONGPADS"> +<device name="SCREW" package="SCREWTERMINAL-3.5MM-4"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> -<technology name=""/> +<technology name=""> +<attribute name="PROD_ID" value="2xCONN-08399" constant="no"/> +<attribute name="SF_ID" value="2xPRT-08084" constant="no"/> +</technology> </technologies> </device> -<device name="LONGPADS" package="1X08_LONGPADS"> +<device name="1.27MM" package="1X04_1.27MM"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""/> </technologies> </device> -<device name="3.5MM-8" package="SCREWTERMINAL-3.5MM-8"> +<device name="LOCK" package="1X04_LOCK"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> -<technology name=""/> +<technology name=""> +<attribute name="PROD_ID" value="CONN-09696" constant="no"/> +</technology> </technologies> </device> -<device name="SMD-STRAIGHT-FEMALE" package="1X08_SMD"> +<device name="LOCK_LONGPADS" package="1X04_LOCK_LONGPADS"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-10204"/> -<attribute name="SF_ID" value="PRT-11543" constant="no"/> +<attribute name="PROD_ID" value="CONN-09696" constant="no"/> </technology> </technologies> </device> -<device name="SMD-STRAIGHT-ALT-FEMALE" package="1X08_SMD_ALT"> +<device name="POLAR_LOCK" package="MOLEX-1X4_LOCK"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-10204"/> -<attribute name="SF_ID" value="PRT-11543" constant="no"/> +<attribute name="PROD_ID" value="CONN-08186" constant="no"/> +<attribute name="SF_ID" value="PRT-08231" constant="no"/> </technology> </technologies> </device> -<device name="SMD-COMBO-FEMALE" package="1X08_SMD_COMBINED"> +<device name="SMD" package="1X04_SMD_RA_MALE"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-10204"/> -<attribute name="SF_ID" value="PRT-11543" constant="no"/> +<attribute name="PROD_ID" value="CONN-09140" constant="no"/> +<attribute name="SF_ID" value="PRT-12638" constant="no"/> +</technology> +</technologies> +</device> +<device name="LONGPADS" package="1X04_LONGPADS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-09696" constant="no"/> +</technology> +</technologies> +</device> +<device name="1X04_NO_SILK" package="1X04_NO_SILK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-09696" constant="no"/> +</technology> +</technologies> +</device> +<device name="JST-PTH" package="JST-4-PTH"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="WIRE-13531" constant="no"/> +<attribute name="SF_ID" value="PRT-09916" constant="no"/> </technology> </technologies> </device> -<device name="BM08B-SRSS-TB" package="BM08B-SRSS-TB"> +<device name="SCREW_LOCK" package="SCREWTERMINAL-3.5MM-4_LOCK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +<connect gate="G$1" pin="3" pad="3"/> +<connect gate="G$1" pin="4" pad="4"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="SMD2" package="1X04_1MM_RA"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-10556" constant="no"/> +<attribute name="PROD_ID" value="CONN-10310" constant="no"/> +<attribute name="SF_ID" value="PRT-10208" constant="no"/> </technology> </technologies> </device> -<device name="SMD-MALE" package="1X08_SMD_MALE"> +<device name="SMD_STRAIGHT_COMBO" package="1X04_SMD_VERTICAL_COMBO"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-11292"/> -<attribute name="SF_ID" value="PRT-11541" constant="no"/> +<attribute name="PROD_ID" value="CONN-08511"/> +<attribute name="VALUE" value="1X04_SMD_STRAIGHT_COMBO"/> </technology> </technologies> </device> -<device name="NO_SILK_FEMALE_PTH" package="1X08_NO_SILK"> +<device name="SMD_LONG" package="1X04_SMD_LONG"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-08438"/> +<attribute name="PROD_ID" value="CONN-09140" constant="no"/> +<attribute name="SF_ID" value="PRT-12638" constant="no"/> </technology> </technologies> </device> -<device name="LOCK_NO_SILK" package="1X08_LOCK_NO_SILK"> +<device name="JST-PTH-VERT" package="JST-4-PTH-VERT"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> -<technology name=""/> +<technology name=""> +<attribute name="PROD_ID" value="CONN-13251"/> +</technology> </technologies> </device> -<device name="FEMALE_LOCK" package="1X08_FEMALE_LOCK"> +<device name="SMD_RA_FEMALE" package="1X04_SMD_RA_FEMALE"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> <connect gate="G$1" pin="3" pad="3"/> <connect gate="G$1" pin="4" pad="4"/> -<connect gate="G$1" pin="5" pad="5"/> -<connect gate="G$1" pin="6" pad="6"/> -<connect gate="G$1" pin="7" pad="7"/> -<connect gate="G$1" pin="8" pad="8"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-09233" constant="no"/> -<attribute name="SF_ID" value="PRT-09279" constant="no"/> +<attribute name="PROD_ID" value="CONN-12382" constant="no"/> </technology> </technologies> </device> </devices> </deviceset> -<deviceset name="CONN_04" prefix="J" uservalue="yes"> +<deviceset name="CONN_02" prefix="J" uservalue="yes"> <description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> @@ -3086,233 +4502,384 @@ This footprint was designed to help hold the alignment of a through-hole compone <p></p> <b>Special notes:</b> -<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208</description> + + Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br> + +2.54_SCREWTERM for use with PRT-10571.<br><br> + +3.5mm Screw Terminal footprints for PRT-08084<br><br> + +5mm Screw Terminal footprints for use with PRT-08432</description> <gates> -<gate name="G$1" symbol="CONN_04" x="-2.54" y="0"/> +<gate name="G$1" symbol="CONN_02" x="-2.54" y="0"/> </gates> <devices> -<device name="" package="1X04"> +<device name="" package="1X02"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="POLAR" package="MOLEX-1X2"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-09696" constant="no"/> +<attribute name="SF_ID" value="PRT-09918" constant="no"/> </technology> </technologies> </device> -<device name="POLAR" package="MOLEX-1X4"> +<device name="3.5MM" package="SCREWTERMINAL-3.5MM-2"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-08186" constant="no"/> -<attribute name="SF_ID" value="PRT-08231" constant="no"/> +<attribute name="PROD_ID" value="CONN-08399" constant="no"/> </technology> </technologies> </device> -<device name="SCREW" package="SCREWTERMINAL-3.5MM-4"> +<device name="-JST-2MM-SMT" package="JST-2-SMD"> +<connects> +<connect gate="G$1" pin="1" pad="2"/> +<connect gate="G$1" pin="2" pad="1"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-11443"/> +</technology> +</technologies> +</device> +<device name="PTH2" package="1X02_BIG"> +<connects> +<connect gate="G$1" pin="1" pad="P$1"/> +<connect gate="G$1" pin="2" pad="P$2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="4UCON-15767" package="JST-2-SMD-VERT"> +<connects> +<connect gate="G$1" pin="1" pad="GND"/> +<connect gate="G$1" pin="2" pad="VCC"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="5MM" package="SCREWTERMINAL-5MM-2"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="2xCONN-08399" constant="no"/> -<attribute name="SF_ID" value="2xPRT-08084" constant="no"/> +<attribute name="SF_SKU" value="PRT-08432" constant="no"/> </technology> </technologies> </device> -<device name="1.27MM" package="1X04_1.27MM"> +<device name="LOCK" package="1X02_LOCK"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""/> </technologies> </device> -<device name="LOCK" package="1X04_LOCK"> +<device name="POLAR_LOCK" package="MOLEX-1X2_LOCK"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-09696" constant="no"/> +<attribute name="SF_ID" value="PRT-09918" constant="no"/> </technology> </technologies> </device> -<device name="LOCK_LONGPADS" package="1X04_LOCK_LONGPADS"> +<device name="LOCK_LONGPADS" package="1X02_LOCK_LONGPADS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="3.5MM_LOCK" package="SCREWTERMINAL-3.5MM-2_LOCK"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-09696" constant="no"/> +<attribute name="PROD_ID" value="CONN-08399" constant="no"/> </technology> </technologies> </device> -<device name="POLAR_LOCK" package="MOLEX-1X4_LOCK"> +<device name="PTH3" package="1X02_LONGPADS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="1X02_NO_SILK" package="1X02_NO_SILK"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="JST-PTH-2" package="JST-2-PTH"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-08186" constant="no"/> -<attribute name="SF_ID" value="PRT-08231" constant="no"/> +<attribute name="PROD_ID" value="CONN-09863" constant="no"/> +<attribute name="SKU" value="PRT-09914" constant="no"/> </technology> </technologies> </device> -<device name="SMD" package="1X04_SMD_RA_MALE"> +<device name="PTH4" package="1X02_XTRA_BIG"> <connects> <connect gate="G$1" pin="1" pad="1"/> <connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="CONN-09140" constant="no"/> -<attribute name="SF_ID" value="PRT-12638" constant="no"/> -</technology> +<technology name=""/> +</technologies> +</device> +<device name="POGO_PIN_HOLES_ONLY" package="1X02_PP_HOLES_ONLY"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="3.5MM-NO_SILK" package="SCREWTERMINAL-3.5MM-2-NS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-08399" constant="no"/> +</technology> +</technologies> +</device> +<device name="-JST-2-PTH-NO_SILK" package="JST-2-PTH-NS"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="JST-PTH-2-KIT" package="JST-2-PTH-KIT"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="SPRING-2.54-RA" package="SPRINGTERMINAL-2.54MM-2"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="2.54MM_SCREWTERM" package="1X02_2.54_SCREWTERM"> +<connects> +<connect gate="G$1" pin="1" pad="P1"/> +<connect gate="G$1" pin="2" pad="P2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="SMALL_POKEHOME" package="1X02_POKEHOME"> +<connects> +<connect gate="G$1" pin="1" pad="P1 P3"/> +<connect gate="G$1" pin="2" pad="P2 P4"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-13512"/> +</technology> +</technologies> +</device> +<device name="PTH_RA_FEMALE" package="1X02_RA_PTH_FEMALE"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +<connect gate="G$1" pin="2" pad="2"/> +</connects> +<technologies> +<technology name=""> +<attribute name="PROD_ID" value="CONN-13700"/> +</technology> +</technologies> +</device> +</devices> +</deviceset> +<deviceset name="CONN_01" prefix="J" uservalue="yes"> +<description><h3>Single connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> +<p></p> + +<p></p> +On any of the 0.1 inch spaced packages, you can populate with these: +<ul> +<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> +<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> +<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> +<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> +<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> +<p></p> +</ul> +<p></p> +This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads. +<ul> +<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> +<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> +<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> +<p></p> +</ul> + +<p></p> +<b>Special notes:</b> +<p> </p> +SMTSO-256-ET is a "flush mount" nut for a 4-40 screw. We mostly use this on specialty testbeds; it is a nice way to connect hardware to your PCB at an adjustable hieght. +<p></p> +Also note, the SNAP packages are for using a snappable style connector. We sell a baggie of snaps and they are also used on two LilyPad designs: +<ul> +<li><a href="https://www.sparkfun.com/products/11347"> Snap Assortment - 30 pack (male and female)</a> (DEV-11347)</li> +<li><a href="https://www.sparkfun.com/products/10941">LilyPad Arduino SimpleSnap</a> (DEV-10941)</li> +<li><a href="https://www.sparkfun.com/products/10940"> LilyPad SimpleSnap Protoboard</a> (DEV-10940)</li> +<p></p> +</ul></description> +<gates> +<gate name="G$1" symbol="CONN_01" x="0" y="0"/> +</gates> +<devices> +<device name="PTH_LONGPAD" package="1X01_LONGPAD"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="" package="1X01"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="PTH_2MM" package="1X01_2MM"> +<connects> +<connect gate="G$1" pin="1" pad="1"/> +</connects> +<technologies> +<technology name=""/> </technologies> </device> -<device name="LONGPADS" package="1X04_LONGPADS"> +<device name="OFFSET" package="1X01_OFFSET"> <connects> <connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="CONN-09696" constant="no"/> -</technology> +<technology name=""/> </technologies> </device> -<device name="1X04_NO_SILK" package="1X04_NO_SILK"> +<device name="POGOPIN_HOLE_LARGE" package="1X01_POGOPIN_HOLE_0.061_DIA"> <connects> <connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="CONN-09696" constant="no"/> -</technology> +<technology name=""/> </technologies> </device> -<device name="JST-PTH" package="JST-4-PTH"> +<device name="POGOPIN_HOLE_0.58" package="1X01_POGOPIN_HOLE_0.58_DIA"> <connects> <connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="WIRE-13531" constant="no"/> -<attribute name="SF_ID" value="PRT-09916" constant="no"/> -</technology> +<technology name=""/> </technologies> </device> -<device name="SCREW_LOCK" package="SCREWTERMINAL-3.5MM-4_LOCK"> +<device name="SNAP-FEMALE" package="SNAP-FEMALE"> <connects> <connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> <technology name=""/> </technologies> </device> -<device name="SMD2" package="1X04_1MM_RA"> +<device name="SNAP-MALE" package="SNAP-MALE"> <connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="1" pad="2"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="CONN-10310" constant="no"/> -<attribute name="SF_ID" value="PRT-10208" constant="no"/> -</technology> +<technology name=""/> </technologies> </device> -<device name="SMD_STRAIGHT_COMBO" package="1X04_SMD_VERTICAL_COMBO"> +<device name="SPRING-CONN" package="SPRING-CONNECTOR"> <connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="1" pad="P$2"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-08511"/> -<attribute name="VALUE" value="1X04_SMD_STRAIGHT_COMBO"/> +<attribute name="SF_ID" value="PRT-11822" constant="no"/> </technology> </technologies> </device> -<device name="SMD_LONG" package="1X04_SMD_LONG"> +<device name="PTH_NO_SILK_KIT" package="1X01NS_KIT"> <connects> <connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="CONN-09140" constant="no"/> -<attribute name="SF_ID" value="PRT-12638" constant="no"/> -</technology> +<technology name=""/> </technologies> </device> -<device name="JST-PTH-VERT" package="JST-4-PTH-VERT"> +<device name="PTH_NO_SILK_YES_STOP" package="1X01_NO_SILK"> <connects> <connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> </connects> <technologies> -<technology name=""> -<attribute name="PROD_ID" value="CONN-13251"/> -</technology> +<technology name=""/> </technologies> </device> -<device name="SMD_RA_FEMALE" package="1X04_SMD_RA_FEMALE"> +<device name="SMTSO-256-ET-0.165DIA" package="SMTSO-256-ET-0.165DIA"> <connects> -<connect gate="G$1" pin="1" pad="1"/> -<connect gate="G$1" pin="2" pad="2"/> -<connect gate="G$1" pin="3" pad="3"/> -<connect gate="G$1" pin="4" pad="4"/> +<connect gate="G$1" pin="1" pad="P$1"/> </connects> <technologies> <technology name=""> -<attribute name="PROD_ID" value="CONN-12382" constant="no"/> +<attribute name="PROD_ID" value="HW-08694" constant="no"/> </technology> </technologies> </device> @@ -3322,22 +4889,21 @@ This footprint was designed to help hold the alignment of a through-hole compone </library> <library name="connector"> <packages> -<package name="JRTOMBSTONE"> -<wire x1="-1.1" y1="-1" x2="-1.1" y2="0.7" width="0.127" layer="21"/> -<wire x1="-1.1" y1="0.7" x2="1" y2="0.7" width="0.127" layer="21" curve="-180"/> -<wire x1="1" y1="0.7" x2="1" y2="-1" width="0.127" layer="21"/> -<wire x1="1" y1="-1" x2="-1.1" y2="-1" width="0.127" layer="21"/> -<wire x1="-0.8" y1="-0.5" x2="-0.6" y2="-0.5" width="0.127" layer="21"/> -<wire x1="-0.6" y1="-0.5" x2="-0.3" y2="-0.2" width="0.127" layer="21" curve="90"/> -<wire x1="-0.3" y1="-0.2" x2="-0.3" y2="0.7" width="0.127" layer="21"/> -<wire x1="-0.3" y1="0.7" x2="-0.8" y2="0.7" width="0.127" layer="21"/> -<wire x1="-0.3" y1="0.7" x2="0.1" y2="0.7" width="0.127" layer="21"/> -<wire x1="0.1" y1="0.7" x2="0.1" y2="0.1" width="0.127" layer="21"/> -<wire x1="0.1" y1="0.1" x2="0.1" y2="-0.5" width="0.127" layer="21"/> -<wire x1="0.1" y1="0.7" x2="0.4" y2="0.7" width="0.127" layer="21"/> -<wire x1="0.4" y1="0.7" x2="0.4" y2="0.1" width="0.127" layer="21" curve="-180"/> -<wire x1="0.4" y1="0.1" x2="0.7" y2="-0.5" width="0.127" layer="21"/> -<wire x1="0.4" y1="0.1" x2="0.1" y2="0.1" width="0.127" layer="21"/> +<package name="FIDUCIAL_1MM"> +<smd name="1" x="0" y="0" dx="1" dy="1" layer="1" roundness="100" stop="no" cream="no"/> +<polygon width="0.127" layer="29"> +<vertex x="-1" y="0" curve="90"/> +<vertex x="0" y="-1" curve="90"/> +<vertex x="1" y="0" curve="90"/> +<vertex x="0" y="1" curve="90"/> +</polygon> +<polygon width="0.127" layer="41"> +<vertex x="-1" y="0" curve="90"/> +<vertex x="0" y="-1" curve="90"/> +<vertex x="1" y="0" curve="90"/> +<vertex x="0" y="1" curve="90"/> +</polygon> +<circle x="0" y="0" radius="0.4953" width="0" layer="51"/> </package> <package name="RJ45-LED-RJE7318800XXX"> <hole x="-5.74" y="0" drill="1.8"/> @@ -3363,100 +4929,106 @@ This footprint was designed to help hold the alignment of a through-hole compone <pad name="GRNP" x="4.47" y="3.6" drill="1.1"/> <pad name="YLWN" x="-4.47" y="3.6" drill="1.1"/> </package> -<package name="FIDUCIAL_1MM"> -<smd name="1" x="0" y="0" dx="1" dy="1" layer="1" roundness="100" stop="no" cream="no"/> -<polygon width="0.127" layer="29"> -<vertex x="-1" y="0" curve="90"/> -<vertex x="0" y="-1" curve="90"/> -<vertex x="1" y="0" curve="90"/> -<vertex x="0" y="1" curve="90"/> -</polygon> -<polygon width="0.127" layer="41"> -<vertex x="-1" y="0" curve="90"/> -<vertex x="0" y="-1" curve="90"/> -<vertex x="1" y="0" curve="90"/> -<vertex x="0" y="1" curve="90"/> -</polygon> -<circle x="0" y="0" radius="0.4953" width="0" layer="51"/> +<package name="RJ45-LED-RJHSE-5381-UPTAB"> +<hole x="-6.35" y="-2.54" drill="3.2512"/> +<hole x="6.35" y="-2.54" drill="3.2512"/> +<pad name="SHDL1" x="-8.128" y="0.889" drill="1.5748" shape="square" rot="R180"/> +<pad name="SHDL2" x="8.128" y="0.889" drill="1.5748" shape="square"/> +<wire x1="-8.254" y1="-6.5" x2="-8.255" y2="-8.509" width="0.1524" layer="51"/> +<wire x1="-8.255" y1="-8.509" x2="8.255" y2="-8.509" width="0.1524" layer="51"/> +<wire x1="8.255" y1="-8.509" x2="8.255" y2="7.366" width="0.1524" layer="51"/> +<wire x1="8.255" y1="7.366" x2="-8.255" y2="7.366" width="0.1524" layer="51"/> +<wire x1="-8.255" y1="7.366" x2="-8.254" y2="-6.5" width="0.1524" layer="51"/> +<pad name="P$1" x="3.556" y="0" drill="0.9"/> +<pad name="P$2" x="2.54" y="1.778" drill="0.9"/> +<pad name="P$3" x="1.524" y="0" drill="0.9"/> +<pad name="P$5" x="-0.508" y="0" drill="0.9"/> +<pad name="P$7" x="-2.54" y="0" drill="0.9"/> +<pad name="P$4" x="0.508" y="1.778" drill="0.9"/> +<pad name="P$6" x="-1.524" y="1.778" drill="0.9"/> +<pad name="P$8" x="-3.556" y="1.778" drill="0.9"/> +<pad name="YLWP" x="-6.858" y="6.604" drill="0.889"/> +<pad name="GRNN" x="6.858" y="6.604" drill="0.889"/> +<pad name="GRNP" x="4.572" y="6.604" drill="0.889"/> +<pad name="YLWN" x="-4.572" y="6.604" drill="0.889"/> </package> </packages> <symbols> -<symbol name="JRTOMBSTONE"> -<wire x1="-5.08" y1="-5.08" x2="-5.08" y2="2.54" width="0.254" layer="94"/> -<wire x1="-5.08" y1="2.54" x2="5.08" y2="2.54" width="0.254" layer="94" curve="-180"/> -<wire x1="5.08" y1="2.54" x2="5.08" y2="-5.08" width="0.254" layer="94"/> -<wire x1="5.08" y1="-5.08" x2="-5.08" y2="-5.08" width="0.254" layer="94"/> -<wire x1="-3.81" y1="3.175" x2="-1.27" y2="3.175" width="0.254" layer="94"/> -<wire x1="-1.27" y1="3.175" x2="0" y2="3.175" width="0.254" layer="94"/> -<wire x1="-1.27" y1="3.175" x2="-1.27" y2="-0.635" width="0.254" layer="94"/> -<wire x1="-1.27" y1="-0.635" x2="-3.81" y2="-1.27" width="0.254" layer="94" curve="-143.130069"/> -<wire x1="0.635" y1="3.175" x2="0.635" y2="-1.905" width="0.254" layer="94"/> -<wire x1="0.635" y1="3.175" x2="1.27" y2="3.175" width="0.254" layer="94"/> -<wire x1="1.27" y1="3.175" x2="2.54" y2="0.635" width="0.254" layer="94" curve="-126.869898"/> -<wire x1="2.54" y1="0.635" x2="1.27" y2="0" width="0.254" layer="94" curve="-53.129967"/> -<wire x1="1.27" y1="0" x2="3.175" y2="-1.905" width="0.254" layer="94"/> -</symbol> -<symbol name="ATK-PHY"> -<pin name="TX" x="-5.08" y="10.16" length="middle"/> -<pin name="RX" x="-5.08" y="15.24" length="middle"/> -<pin name="CLKIN" x="-5.08" y="20.32" length="middle"/> -<pin name="GND" x="-5.08" y="0" length="middle"/> -<pin name="3V3" x="-5.08" y="-5.08" length="middle"/> -<pin name="GRN-RX" x="-5.08" y="-10.16" length="middle"/> -<pin name="YLW-TX" x="-5.08" y="-15.24" length="middle"/> -<wire x1="0" y1="22.86" x2="0" y2="-17.78" width="0.254" layer="94"/> -<wire x1="0" y1="-17.78" x2="17.78" y2="-17.78" width="0.254" layer="94"/> -<wire x1="17.78" y1="-17.78" x2="17.78" y2="22.86" width="0.254" layer="94"/> -<wire x1="17.78" y1="22.86" x2="0" y2="22.86" width="0.254" layer="94"/> -<pin name="CLKOUT" x="-5.08" y="5.08" length="middle"/> -</symbol> <symbol name="DOT"> <circle x="0" y="0" radius="2.54" width="0.254" layer="94"/> </symbol> +<symbol name="ATK-RS48PHYVE"> +<pin name="3V3-LED" x="-10.16" y="-15.24" length="middle"/> +<pin name="LED-GRN-CATHODE" x="-10.16" y="-20.32" length="middle"/> +<pin name="LED-YLW-CATHODE" x="-10.16" y="-30.48" length="middle"/> +<pin name="CLKRX-Y" x="-10.16" y="-7.62" length="middle"/> +<pin name="CLKTX-Z" x="-10.16" y="-2.54" length="middle"/> +<pin name="RX-A" x="-10.16" y="2.54" length="middle"/> +<pin name="RX-B" x="-10.16" y="12.7" length="middle"/> +<pin name="TX-Z" x="-10.16" y="20.32" length="middle"/> +<pin name="TX-Y" x="-10.16" y="25.4" length="middle"/> +<pin name="CLKRX-B" x="-10.16" y="30.48" length="middle"/> +<pin name="CLKRX-A" x="-10.16" y="40.64" length="middle"/> +<wire x1="-5.08" y1="43.18" x2="-5.08" y2="-33.02" width="0.254" layer="94"/> +<wire x1="-5.08" y1="-33.02" x2="20.32" y2="-33.02" width="0.254" layer="94"/> +<wire x1="20.32" y1="-33.02" x2="20.32" y2="43.18" width="0.254" layer="94"/> +<wire x1="20.32" y1="43.18" x2="-5.08" y2="43.18" width="0.254" layer="94"/> +<text x="0" y="45.72" size="1.27" layer="95">>NAME</text> +<text x="0" y="-38.1" size="1.27" layer="95">>VALUE</text> +</symbol> </symbols> <devicesets> -<deviceset name="JRTOMBSTONE"> +<deviceset name="FIDUCIAL"> +<description>For use by pick and place machines to calibrate the vision/machine, 1mm +<p>By microbuilder.eu</p></description> <gates> -<gate name="G$1" symbol="JRTOMBSTONE" x="0" y="0"/> +<gate name="G$1" symbol="DOT" x="0" y="0"/> </gates> <devices> -<device name="" package="JRTOMBSTONE"> +<device name="" package="FIDUCIAL_1MM"> <technologies> <technology name=""/> </technologies> </device> </devices> </deviceset> -<deviceset name="ATK-PHY" prefix="J"> +<deviceset name="ATK-RS48PHYVE" prefix="J"> <gates> -<gate name="G$1" symbol="ATK-PHY" x="0" y="0"/> +<gate name="G$1" symbol="ATK-RS48PHYVE" x="0" y="0"/> </gates> <devices> -<device name="" package="RJ45-LED-RJE7318800XXX"> +<device name="RJ45LED" package="RJ45-LED-RJE7318800XXX"> <connects> -<connect gate="G$1" pin="3V3" pad="GRNP P$4 P$5 YLWP"/> -<connect gate="G$1" pin="CLKIN" pad="P$1"/> -<connect gate="G$1" pin="CLKOUT" pad="P$8"/> -<connect gate="G$1" pin="GND" pad="P$2 P$7 SHDL1 SHDL2"/> -<connect gate="G$1" pin="GRN-RX" pad="GRNN"/> -<connect gate="G$1" pin="RX" pad="P$3"/> -<connect gate="G$1" pin="TX" pad="P$6"/> -<connect gate="G$1" pin="YLW-TX" pad="YLWN"/> +<connect gate="G$1" pin="3V3-LED" pad="GRNP YLWP"/> +<connect gate="G$1" pin="CLKRX-A" pad="P$8"/> +<connect gate="G$1" pin="CLKRX-B" pad="P$7"/> +<connect gate="G$1" pin="CLKRX-Y" pad="P$1"/> +<connect gate="G$1" pin="CLKTX-Z" pad="P$2"/> +<connect gate="G$1" pin="LED-GRN-CATHODE" pad="GRNN"/> +<connect gate="G$1" pin="LED-YLW-CATHODE" pad="YLWN"/> +<connect gate="G$1" pin="RX-A" pad="P$3"/> +<connect gate="G$1" pin="RX-B" pad="P$4"/> +<connect gate="G$1" pin="TX-Y" pad="P$6"/> +<connect gate="G$1" pin="TX-Z" pad="P$5"/> </connects> <technologies> <technology name=""/> </technologies> </device> -</devices> -</deviceset> -<deviceset name="FIDUCIAL"> -<description>For use by pick and place machines to calibrate the vision/machine, 1mm -<p>By microbuilder.eu</p></description> -<gates> -<gate name="G$1" symbol="DOT" x="0" y="0"/> -</gates> -<devices> -<device name="" package="FIDUCIAL_1MM"> +<device name="RJ45LEDTABUP" package="RJ45-LED-RJHSE-5381-UPTAB"> +<connects> +<connect gate="G$1" pin="3V3-LED" pad="GRNP YLWP"/> +<connect gate="G$1" pin="CLKRX-A" pad="P$8"/> +<connect gate="G$1" pin="CLKRX-B" pad="P$7"/> +<connect gate="G$1" pin="CLKRX-Y" pad="P$1"/> +<connect gate="G$1" pin="CLKTX-Z" pad="P$2"/> +<connect gate="G$1" pin="LED-GRN-CATHODE" pad="GRNN"/> +<connect gate="G$1" pin="LED-YLW-CATHODE" pad="YLWN"/> +<connect gate="G$1" pin="RX-A" pad="P$3"/> +<connect gate="G$1" pin="RX-B" pad="P$4"/> +<connect gate="G$1" pin="TX-Y" pad="P$6"/> +<connect gate="G$1" pin="TX-Z" pad="P$5"/> +</connects> <technologies> <technology name=""/> </technologies> @@ -4258,6 +5830,224 @@ high speed (Philips)</description> </deviceset> </devicesets> </library> +<library name="sensor"> +<packages> +<package name="SOT23"> +<description><b>SOT 23</b></description> +<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/> +<wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/> +<wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/> +<wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/> +<wire x1="-1.4224" y1="-0.1524" x2="-1.4224" y2="0.6604" width="0.1524" layer="21"/> +<wire x1="-1.4224" y1="0.6604" x2="-0.8636" y2="0.6604" width="0.1524" layer="21"/> +<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.1524" width="0.1524" layer="21"/> +<wire x1="0.8636" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="21"/> +<smd name="3" x="0" y="1.1" dx="0.762" dy="1.016" layer="1"/> +<smd name="2" x="0.95" y="-1.1" dx="0.762" dy="1.016" layer="1"/> +<smd name="1" x="-0.95" y="-1.1" dx="0.762" dy="1.016" layer="1"/> +<text x="-1.905" y="1.905" size="1.27" layer="25">>NAME</text> +<text x="-1.905" y="-3.175" size="1.27" layer="27">>VALUE</text> +<rectangle x1="-0.2286" y1="0.7112" x2="0.2286" y2="1.2954" layer="51"/> +<rectangle x1="0.7112" y1="-1.2954" x2="1.1684" y2="-0.7112" layer="51"/> +<rectangle x1="-1.1684" y1="-1.2954" x2="-0.7112" y2="-0.7112" layer="51"/> +</package> +</packages> +<symbols> +<symbol name="RTD-NI1000SOT"> +<pin name="TERM1" x="-12.7" y="5.08" length="middle"/> +<pin name="TERM2" x="-12.7" y="-5.08" length="middle"/> +<pin name="SENSE" x="12.7" y="0" length="middle" rot="R180"/> +<wire x1="-7.62" y1="7.62" x2="7.62" y2="7.62" width="0.254" layer="94"/> +<wire x1="7.62" y1="7.62" x2="7.62" y2="-7.62" width="0.254" layer="94"/> +<wire x1="7.62" y1="-7.62" x2="-7.62" y2="-7.62" width="0.254" layer="94"/> +<wire x1="-7.62" y1="-7.62" x2="-7.62" y2="7.62" width="0.254" layer="94"/> +<text x="-5.08" y="10.16" size="1.778" layer="95">>NAME</text> +<text x="-5.08" y="-12.7" size="1.778" layer="96">>VALUE</text> +</symbol> +</symbols> +<devicesets> +<deviceset name="RTD-NI1000SOT" prefix="U"> +<gates> +<gate name="G$1" symbol="RTD-NI1000SOT" x="0" y="0"/> +</gates> +<devices> +<device name="" package="SOT23"> +<connects> +<connect gate="G$1" pin="SENSE" pad="3"/> +<connect gate="G$1" pin="TERM1" pad="1"/> +<connect gate="G$1" pin="TERM2" pad="2"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> +</devicesets> +</library> +<library name="comm"> +<packages> +<package name="TSSOP16"> +<description><b>TSOP16</b><p> +thin small outline package</description> +<wire x1="3.1" y1="-2.4" x2="-3" y2="-2.4" width="0.2032" layer="51"/> +<wire x1="-3" y1="2.6" x2="3.1" y2="2.6" width="0.2032" layer="51"/> +<wire x1="3.1" y1="-2.4" x2="3.1" y2="2.6" width="0.2032" layer="51"/> +<wire x1="-3" y1="2.6" x2="-2.8" y2="2.6" width="0.2032" layer="21"/> +<wire x1="-3" y1="2.6" x2="-3" y2="0.5" width="0.2032" layer="21"/> +<wire x1="-3" y1="-0.5" x2="-3" y2="-2.4" width="0.2032" layer="21"/> +<wire x1="-3" y1="-2.4" x2="-2.8" y2="-2.4" width="0.2032" layer="21"/> +<wire x1="2.9" y1="-2.4" x2="3.1" y2="-2.4" width="0.2032" layer="21"/> +<wire x1="3.1" y1="-2.4" x2="3.1" y2="2.6" width="0.2032" layer="21"/> +<wire x1="3.1" y1="2.6" x2="2.9" y2="2.6" width="0.2032" layer="21"/> +<wire x1="-3" y1="0.5" x2="-3" y2="-0.5" width="0.2032" layer="21" curve="-180"/> +<smd name="1" x="-2.225" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="2" x="-1.575" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="3" x="-0.925" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="4" x="-0.275" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="5" x="0.375" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="6" x="1.025" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="7" x="1.675" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="8" x="2.325" y="-2.85" dx="0.4" dy="1.6" layer="1"/> +<smd name="9" x="2.325" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="10" x="1.675" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="11" x="1.025" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="12" x="0.375" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="13" x="-0.275" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="14" x="-0.925" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="15" x="-1.575" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<smd name="16" x="-2.225" y="3.05" dx="0.4" dy="1.6" layer="1"/> +<rectangle x1="-2.425" y1="-3.3501" x2="-2.0249" y2="-2.5299" layer="51"/> +<rectangle x1="-1.775" y1="-3.3501" x2="-1.3749" y2="-2.5299" layer="51"/> +<rectangle x1="-1.125" y1="-3.3501" x2="-0.725" y2="-2.5299" layer="51"/> +<rectangle x1="-0.475" y1="-3.3501" x2="-0.075" y2="-2.5299" layer="51"/> +<rectangle x1="0.175" y1="-3.3501" x2="0.575" y2="-2.5299" layer="51"/> +<rectangle x1="0.825" y1="-3.3501" x2="1.225" y2="-2.5299" layer="51"/> +<rectangle x1="1.4749" y1="-3.3501" x2="1.875" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="-3.3501" x2="2.525" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="2.7299" x2="2.525" y2="3.5501" layer="51"/> +<rectangle x1="1.4749" y1="2.7299" x2="1.875" y2="3.5501" layer="51"/> +<rectangle x1="0.825" y1="2.7299" x2="1.225" y2="3.5501" layer="51"/> +<rectangle x1="0.175" y1="2.7299" x2="0.575" y2="3.5501" layer="51"/> +<rectangle x1="-0.475" y1="2.7299" x2="-0.075" y2="3.5501" layer="51"/> +<rectangle x1="-1.125" y1="2.7299" x2="-0.725" y2="3.5501" layer="51"/> +<rectangle x1="-1.775" y1="2.7299" x2="-1.3749" y2="3.5501" layer="51"/> +<rectangle x1="-2.425" y1="2.7299" x2="-2.0249" y2="3.5501" layer="51"/> +<rectangle x1="-2.425" y1="-3.3501" x2="-2.0249" y2="-2.5299" layer="51"/> +<rectangle x1="-1.775" y1="-3.3501" x2="-1.3749" y2="-2.5299" layer="51"/> +<rectangle x1="-1.125" y1="-3.3501" x2="-0.725" y2="-2.5299" layer="51"/> +<rectangle x1="-0.475" y1="-3.3501" x2="-0.075" y2="-2.5299" layer="51"/> +<rectangle x1="0.175" y1="-3.3501" x2="0.575" y2="-2.5299" layer="51"/> +<rectangle x1="0.825" y1="-3.3501" x2="1.225" y2="-2.5299" layer="51"/> +<rectangle x1="1.4749" y1="-3.3501" x2="1.875" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="-3.3501" x2="2.525" y2="-2.5299" layer="51"/> +<rectangle x1="2.1249" y1="2.7299" x2="2.525" y2="3.5501" layer="51"/> +<rectangle x1="1.4749" y1="2.7299" x2="1.875" y2="3.5501" layer="51"/> +<rectangle x1="0.825" y1="2.7299" x2="1.225" y2="3.5501" layer="51"/> +<rectangle x1="0.175" y1="2.7299" x2="0.575" y2="3.5501" layer="51"/> +<rectangle x1="-0.475" y1="2.7299" x2="-0.075" y2="3.5501" layer="51"/> +<rectangle x1="-1.125" y1="2.7299" x2="-0.725" y2="3.5501" layer="51"/> +<rectangle x1="-1.775" y1="2.7299" x2="-1.3749" y2="3.5501" layer="51"/> +<rectangle x1="-2.425" y1="2.7299" x2="-2.0249" y2="3.5501" layer="51"/> +<text x="-3.33375" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">>NAME</text> +<text x="3.96875" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="bottom-center">>VALUE</text> +<polygon width="0.127" layer="21"> +<vertex x="-3.65125" y="-3.175" curve="-90"/> +<vertex x="-3.175" y="-2.69875" curve="-90"/> +<vertex x="-2.69875" y="-3.175" curve="-90"/> +<vertex x="-3.175" y="-3.65125" curve="-90"/> +</polygon> +</package> +</packages> +<symbols> +<symbol name="RS485-2BY2-SN75C1168PWR"> +<pin name="1B" x="17.78" y="15.24" length="middle" rot="R180"/> +<pin name="1A" x="17.78" y="25.4" length="middle" rot="R180"/> +<pin name="1R" x="-17.78" y="20.32" length="middle"/> +<pin name="1DE" x="-17.78" y="10.16" length="middle"/> +<pin name="2R" x="-17.78" y="-7.62" length="middle"/> +<pin name="2A" x="17.78" y="-12.7" length="middle" rot="R180"/> +<pin name="2B" x="17.78" y="-2.54" length="middle" rot="R180"/> +<pin name="GND" x="-17.78" y="27.94" length="middle"/> +<pin name="2D" x="-17.78" y="-22.86" length="middle"/> +<pin name="2Y" x="17.78" y="-22.86" length="middle" rot="R180"/> +<pin name="2Z" x="17.78" y="-17.78" length="middle" rot="R180"/> +<pin name="2DE" x="-17.78" y="-17.78" length="middle"/> +<pin name="1Z" x="17.78" y="5.08" length="middle" rot="R180"/> +<pin name="1Y" x="17.78" y="10.16" length="middle" rot="R180"/> +<pin name="1D" x="-17.78" y="5.08" length="middle"/> +<pin name="VCC" x="-17.78" y="35.56" length="middle"/> +<text x="-2.54" y="38.1" size="1.27" layer="95">>NAME</text> +<text x="-2.54" y="-27.94" size="1.27" layer="96">>VALUE</text> +<wire x1="-12.7" y1="38.1" x2="-12.7" y2="-25.4" width="0.254" layer="94"/> +<wire x1="-12.7" y1="-25.4" x2="12.7" y2="-25.4" width="0.254" layer="94"/> +<wire x1="12.7" y1="-25.4" x2="12.7" y2="38.1" width="0.254" layer="94"/> +<wire x1="12.7" y1="38.1" x2="-12.7" y2="38.1" width="0.254" layer="94"/> +<wire x1="-5.08" y1="20.32" x2="0" y2="20.32" width="0.254" layer="94"/> +<wire x1="0" y1="20.32" x2="2.54" y2="22.86" width="0.254" layer="94"/> +<wire x1="2.54" y1="22.86" x2="2.54" y2="17.78" width="0.254" layer="94"/> +<wire x1="2.54" y1="17.78" x2="0" y2="20.32" width="0.254" layer="94"/> +<wire x1="0" y1="10.16" x2="2.54" y2="7.62" width="0.254" layer="94"/> +<wire x1="2.54" y1="7.62" x2="0" y2="5.08" width="0.254" layer="94"/> +<wire x1="0" y1="5.08" x2="0" y2="7.62" width="0.254" layer="94"/> +<wire x1="0" y1="7.62" x2="0" y2="10.16" width="0.254" layer="94"/> +<wire x1="2.54" y1="10.16" x2="2.54" y2="5.08" width="0.254" layer="94"/> +<wire x1="-7.62" y1="5.08" x2="-2.54" y2="5.08" width="0.254" layer="94"/> +<wire x1="-2.54" y1="5.08" x2="-2.54" y2="7.62" width="0.254" layer="94"/> +<wire x1="-2.54" y1="7.62" x2="0" y2="7.62" width="0.254" layer="94"/> +<wire x1="-5.08" y1="10.16" x2="0" y2="10.16" width="0.254" layer="94"/> +<wire x1="0" y1="-7.62" x2="2.54" y2="-5.08" width="0.254" layer="94"/> +<wire x1="2.54" y1="-5.08" x2="2.54" y2="-10.16" width="0.254" layer="94"/> +<wire x1="2.54" y1="-10.16" x2="0" y2="-7.62" width="0.254" layer="94"/> +<wire x1="-5.08" y1="-7.62" x2="0" y2="-7.62" width="0.254" layer="94"/> +<wire x1="0" y1="-17.78" x2="2.54" y2="-20.32" width="0.254" layer="94"/> +<wire x1="2.54" y1="-20.32" x2="0" y2="-22.86" width="0.254" layer="94"/> +<wire x1="0" y1="-22.86" x2="0" y2="-20.32" width="0.254" layer="94"/> +<wire x1="0" y1="-20.32" x2="0" y2="-17.78" width="0.254" layer="94"/> +<wire x1="2.54" y1="-17.78" x2="2.54" y2="-22.86" width="0.254" layer="94"/> +<wire x1="-7.62" y1="-22.86" x2="-2.54" y2="-22.86" width="0.254" layer="94"/> +<wire x1="-2.54" y1="-22.86" x2="-2.54" y2="-20.32" width="0.254" layer="94"/> +<wire x1="0" y1="-20.32" x2="-2.54" y2="-20.32" width="0.254" layer="94"/> +<wire x1="-5.08" y1="-17.78" x2="0" y2="-17.78" width="0.254" layer="94"/> +<circle x="3.302" y="18.288" radius="0.254" width="0.254" layer="94"/> +<circle x="3.302" y="5.334" radius="0.254" width="0.254" layer="94"/> +<circle x="3.302" y="-5.334" radius="0.254" width="0.254" layer="94"/> +<circle x="3.302" y="-18.034" radius="0.254" width="0.254" layer="94"/> +</symbol> +</symbols> +<devicesets> +<deviceset name="RS485-2BY2-SN75C1168PWR" prefix="U"> +<gates> +<gate name="G$1" symbol="RS485-2BY2-SN75C1168PWR" x="0" y="0"/> +</gates> +<devices> +<device name="" package="TSSOP16"> +<connects> +<connect gate="G$1" pin="1A" pad="2"/> +<connect gate="G$1" pin="1B" pad="1"/> +<connect gate="G$1" pin="1D" pad="15"/> +<connect gate="G$1" pin="1DE" pad="4"/> +<connect gate="G$1" pin="1R" pad="3"/> +<connect gate="G$1" pin="1Y" pad="14"/> +<connect gate="G$1" pin="1Z" pad="13"/> +<connect gate="G$1" pin="2A" pad="6"/> +<connect gate="G$1" pin="2B" pad="7"/> +<connect gate="G$1" pin="2D" pad="9"/> +<connect gate="G$1" pin="2DE" pad="12"/> +<connect gate="G$1" pin="2R" pad="5"/> +<connect gate="G$1" pin="2Y" pad="10"/> +<connect gate="G$1" pin="2Z" pad="11"/> +<connect gate="G$1" pin="GND" pad="8"/> +<connect gate="G$1" pin="VCC" pad="16"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> +</devicesets> +</library> </libraries> <attributes> </attributes> @@ -4302,33 +6092,24 @@ high speed (Philips)</description> <part name="R21" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="R100"/> <part name="C24" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> <part name="C26" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="C20" library="borkedlabs-passives" deviceset="CAP" device="1206" value="2.2uF"/> +<part name="C20" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> <part name="C19" library="borkedlabs-passives" deviceset="CAP" device="0805" value="22nF"/> <part name="GND18" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="C16" library="borkedlabs-passives" deviceset="CAP" device="1206" value="2.2uF"/> -<part name="C13" library="borkedlabs-passives" deviceset="CAP" device="1206" value="2.2uF"/> +<part name="C13" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> <part name="GND13" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="C17" library="borkedlabs-passives" deviceset="CAP" device="1206" value="2.2uF"/> -<part name="C14" library="borkedlabs-passives" deviceset="CAP" device="1206" value="2.2uF"/> +<part name="C14" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> <part name="GND14" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="R11" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="10k"/> <part name="GND19" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="C40" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="C42" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="C44" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="GND33" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="GND37" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="GND40" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="GND29" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="R10" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="10k"/> <part name="P+3" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="VCC" device=""/> <part name="R8" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="470R"/> <part name="+3V311" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> -<part name="J8" library="power" deviceset="PWRPAD" device="" value="PWRPAD"/> -<part name="J9" library="power" deviceset="PWRPAD" device="" value="PWRPAD"/> +<part name="J8" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> +<part name="J9" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> <part name="P+7" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="VCC" device=""/> <part name="GND36" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="C25" library="borkedlabs-passives" deviceset="CAP" device="0805" value="1uF"/> <part name="GND4" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="+3V32" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="C6" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> @@ -4349,7 +6130,6 @@ high speed (Philips)</description> <part name="J6" library="SparkFun-Connectors" deviceset="JST_6_PIN_HORIZONTAL" device="" value="BM06B-SRSS-TB"/> <part name="+3V316" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="GND25" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="L1" library="borkedlabs-passives" deviceset="INDUCTOR" device="-0805" value="10uH"/> <part name="C12" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> <part name="+3V38" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="GND11" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> @@ -4376,7 +6156,6 @@ high speed (Philips)</description> <part name="R2" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="10k"/> <part name="GND2" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="C8" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> -<part name="C11" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> <part name="+3V6" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="R4" library="power" deviceset="R_SHUNT" device="2512"/> <part name="R5" library="power" deviceset="R_SHUNT" device="2512"/> @@ -4384,71 +6163,107 @@ high speed (Philips)</description> <part name="U$5" library="lights" deviceset="LED" device="0805"/> <part name="R12" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="470R"/> <part name="U$8" library="lights" deviceset="LED" device="0805"/> -<part name="J7" library="power" deviceset="PWRPAD" device="" value="PWRPAD"/> -<part name="J10" library="power" deviceset="PWRPAD" device="" value="PWRPAD"/> -<part name="J11" library="power" deviceset="PWRPAD" device="" value="PWRPAD"/> -<part name="U$9" library="power" deviceset="INTEGRATED_HALF-CSD88599" device="SON"/> -<part name="U$10" library="power" deviceset="INTEGRATED_HALF-CSD88599" device="SON"/> -<part name="U$11" library="power" deviceset="INTEGRATED_HALF-CSD88599" device="SON"/> -<part name="R13" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="therm"/> -<part name="R14" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="10k"/> +<part name="J7" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> +<part name="J10" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> +<part name="J11" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> <part name="GND6" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="+3V8" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="+3V9" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="BFC1" library="power" deviceset="BFC" device="8MM"/> -<part name="R7" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="470R"/> -<part name="R9" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="470R"/> +<part name="R7" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="120R"/> +<part name="R9" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="120R"/> <part name="C10" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> <part name="C15" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="U$14" library="connector" deviceset="JRTOMBSTONE" device=""/> <part name="J13" library="SparkFun-Connectors" deviceset="CONN_04" device="1X04_NO_SILK"/> <part name="C18" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> <part name="C21" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="J1" library="connector" deviceset="ATK-PHY" device=""/> <part name="U1" library="microcontrollers" deviceset="ATXMEGA_A3U" device="QFN"/> <part name="J2" library="microcontrollers" deviceset="PDI" device="FEMALE_SMD"/> <part name="Y1" library="passives" deviceset="RESONATOR" device="PQRC"/> -<part name="C5" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="C7" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> -<part name="GND1" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> -<part name="+3V5" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="GND5" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="+3V7" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> <part name="GND7" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> <part name="C9" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> -<part name="J4" library="power" deviceset="PWRPAD" device="M3"/> <part name="U$1" library="connector" deviceset="FIDUCIAL" device=""/> <part name="U$3" library="connector" deviceset="FIDUCIAL" device=""/> +<part name="U9" library="sensor" deviceset="RTD-NI1000SOT" device=""/> +<part name="P+1" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="VCC" device=""/> +<part name="GND8" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> +<part name="J5" library="SparkFun-Connectors" deviceset="CONN_02" device="PTH3"/> +<part name="Q1" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q2" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q3" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q4" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q5" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q6" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="J16" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> +<part name="J17" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> +<part name="J18" library="power" deviceset="PWRPAD" device="M3-STANDOFF" value="PWRPADM3-STANDOFF"/> +<part name="J1" library="connector" deviceset="ATK-RS48PHYVE" device="RJ45LEDTABUP"/> +<part name="U3" library="comm" deviceset="RS485-2BY2-SN75C1168PWR" device=""/> +<part name="R1" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="120R"/> +<part name="R13" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="120R"/> +<part name="U4" library="power" deviceset="BUCK-TS30011-12-13" device="QFN"/> +<part name="L1" library="power" deviceset="INDUCTOR" device=""/> +<part name="U5" library="power" deviceset="VREG-AP2112" device=""/> +<part name="BFC2" library="power" deviceset="BFC" device="8MM"/> +<part name="C22" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> +<part name="C23" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> +<part name="GND10" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/> +<part name="+3V10" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+3V3" device=""/> +<part name="P+2" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="VCC" device=""/> +<part name="P+4" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+5V" device=""/> +<part name="C27" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> +<part name="P+10" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="+5V" device=""/> +<part name="C30" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> +<part name="C34" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> +<part name="C35" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> +<part name="C36" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> +<part name="C37" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> +<part name="C38" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> +<part name="J4" library="SparkFun-Connectors" deviceset="CONN_04" device="1X04_NO_SILK"/> +<part name="J19" library="SparkFun-Connectors" deviceset="CONN_04" device="1X04_NO_SILK"/> +<part name="R14" library="borkedlabs-passives" deviceset="RESISTOR" device="0805-RES" value="1k"/> +<part name="J20" library="SparkFun-Connectors" deviceset="CONN_01" device="PTH_NO_SILK_YES_STOP"/> +<part name="C16" library="borkedlabs-passives" deviceset="CAP" device="0603-CAP" value="0.1uF"/> +<part name="J21" library="power" deviceset="SL-LINK" device=""/> +<part name="Q7" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q8" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q9" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q10" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q11" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="Q12" library="power" deviceset="NFET-TPW4R008NH" device=""/> +<part name="C5" library="borkedlabs-passives" deviceset="CAP" device="1206" value="10uF"/> </parts> <sheets> <sheet> <plain> -<text x="236.22" y="43.18" size="1.778" layer="91">connect to SL_U on DRV</text> +<text x="408.94" y="40.64" size="1.778" layer="97">hack for eagle trace routing specific gnd</text> </plain> <instances> -<instance part="P+5" gate="VCC" x="266.7" y="116.84"/> -<instance part="GND31" gate="1" x="266.7" y="33.02"/> -<instance part="R24" gate="G$1" x="236.22" y="88.9"/> -<instance part="R25" gate="G$1" x="236.22" y="68.58"/> -<instance part="P+6" gate="VCC" x="373.38" y="116.84"/> -<instance part="GND34" gate="1" x="373.38" y="25.4"/> -<instance part="R28" gate="G$1" x="342.9" y="88.9"/> -<instance part="R29" gate="G$1" x="342.9" y="68.58"/> +<instance part="P+5" gate="VCC" x="266.7" y="101.6"/> +<instance part="GND31" gate="1" x="266.7" y="25.4"/> +<instance part="R24" gate="G$1" x="251.46" y="78.74"/> +<instance part="R25" gate="G$1" x="251.46" y="58.42"/> +<instance part="P+6" gate="VCC" x="360.68" y="101.6"/> +<instance part="GND34" gate="1" x="360.68" y="25.4"/> +<instance part="R28" gate="G$1" x="345.44" y="78.74"/> +<instance part="R29" gate="G$1" x="345.44" y="58.42"/> <instance part="R27" gate="G$1" x="266.7" y="-45.72" rot="R90"/> <instance part="R26" gate="G$1" x="266.7" y="-30.48" rot="R90"/> <instance part="GND32" gate="1" x="266.7" y="-58.42"/> <instance part="R32" gate="G$1" x="320.04" y="-45.72" rot="R90"/> <instance part="R31" gate="G$1" x="320.04" y="-30.48" rot="R90"/> <instance part="GND35" gate="1" x="320.04" y="-58.42"/> -<instance part="P+8" gate="VCC" x="469.9" y="116.84"/> -<instance part="GND38" gate="1" x="469.9" y="27.94"/> -<instance part="R33" gate="G$1" x="439.42" y="88.9"/> -<instance part="R34" gate="G$1" x="439.42" y="68.58"/> +<instance part="P+8" gate="VCC" x="457.2" y="101.6"/> +<instance part="GND38" gate="1" x="457.2" y="20.32"/> +<instance part="R33" gate="G$1" x="441.96" y="78.74"/> +<instance part="R34" gate="G$1" x="441.96" y="58.42"/> <instance part="R37" gate="G$1" x="373.38" y="-45.72" rot="R90"/> <instance part="R36" gate="G$1" x="373.38" y="-30.48" rot="R90"/> <instance part="GND39" gate="1" x="373.38" y="-58.42"/> <instance part="U2" gate="G$1" x="96.52" y="35.56"/> -<instance part="GND26" gate="1" x="96.52" y="-40.64"/> +<instance part="GND26" gate="1" x="96.52" y="-48.26"/> <instance part="C31" gate="G$1" x="139.7" y="43.18"/> <instance part="C32" gate="G$1" x="139.7" y="30.48"/> <instance part="C33" gate="G$1" x="139.7" y="17.78"/> @@ -4463,30 +6278,21 @@ high speed (Philips)</description> <instance part="C20" gate="G$1" x="71.12" y="0" rot="R180"/> <instance part="C19" gate="G$1" x="53.34" y="35.56" rot="R270"/> <instance part="GND18" gate="1" x="30.48" y="-5.08" rot="R270"/> -<instance part="C16" gate="G$1" x="45.72" y="35.56" rot="R180"/> <instance part="C13" gate="G$1" x="35.56" y="35.56" rot="R180"/> <instance part="GND13" gate="1" x="25.4" y="30.48" rot="R270"/> -<instance part="C17" gate="G$1" x="48.26" y="10.16" rot="R180"/> -<instance part="C14" gate="G$1" x="38.1" y="10.16" rot="R180"/> +<instance part="C14" gate="G$1" x="45.72" y="10.16" rot="R180"/> <instance part="GND14" gate="1" x="25.4" y="5.08" rot="R270"/> <instance part="R11" gate="G$1" x="53.34" y="53.34" rot="R180"/> <instance part="GND19" gate="1" x="30.48" y="53.34" rot="R270"/> -<instance part="C40" gate="G$1" x="276.86" y="109.22" rot="R90"/> -<instance part="C42" gate="G$1" x="383.54" y="109.22" rot="R90"/> -<instance part="C44" gate="G$1" x="480.06" y="109.22" rot="R90"/> -<instance part="GND33" gate="1" x="284.48" y="109.22" rot="R90"/> -<instance part="GND37" gate="1" x="391.16" y="109.22" rot="R90"/> -<instance part="GND40" gate="1" x="487.68" y="109.22" rot="R90"/> <instance part="GND29" gate="1" x="142.24" y="55.88" rot="R90"/> <instance part="R10" gate="G$1" x="45.72" y="48.26" rot="R180"/> -<instance part="P+3" gate="VCC" x="116.84" y="-43.18" rot="R180"/> +<instance part="P+3" gate="VCC" x="116.84" y="-48.26" rot="R180"/> <instance part="R8" gate="G$1" x="-71.12" y="172.72"/> <instance part="+3V311" gate="G$1" x="53.34" y="10.16" rot="R90"/> <instance part="J8" gate="G$1" x="284.48" y="147.32" rot="R180"/> <instance part="J9" gate="G$1" x="284.48" y="139.7" rot="R180"/> -<instance part="P+7" gate="VCC" x="378.46" y="147.32" rot="R270"/> -<instance part="GND36" gate="1" x="378.46" y="139.7" rot="R90"/> -<instance part="C25" gate="G$1" x="111.76" y="-20.32" rot="R270"/> +<instance part="P+7" gate="VCC" x="375.92" y="147.32" rot="R270"/> +<instance part="GND36" gate="1" x="375.92" y="139.7" rot="R90"/> <instance part="GND4" gate="1" x="-172.72" y="50.8" rot="R270"/> <instance part="+3V32" gate="G$1" x="-172.72" y="96.52" rot="R90"/> <instance part="C6" gate="G$1" x="-121.92" y="91.44"/> @@ -4504,19 +6310,18 @@ high speed (Philips)</description> <instance part="GND41" gate="1" x="426.72" y="-58.42"/> <instance part="C45" gate="G$1" x="434.34" y="-48.26"/> <instance part="P+9" gate="VCC" x="426.72" y="-17.78"/> -<instance part="J6" gate="A" x="96.52" y="111.76" rot="R180"/> -<instance part="+3V316" gate="G$1" x="71.12" y="114.3" rot="R90"/> -<instance part="GND25" gate="1" x="66.04" y="116.84" rot="R270"/> -<instance part="L1" gate="G$1" x="-2.54" y="116.84" rot="R90"/> +<instance part="J6" gate="A" x="93.98" y="127" rot="R180"/> +<instance part="+3V316" gate="G$1" x="68.58" y="129.54" rot="R90"/> +<instance part="GND25" gate="1" x="63.5" y="132.08" rot="R270"/> <instance part="C12" gate="G$1" x="-15.24" y="111.76"/> -<instance part="+3V38" gate="G$1" x="12.7" y="116.84" rot="R270"/> +<instance part="+3V38" gate="G$1" x="-7.62" y="116.84" rot="R270"/> <instance part="GND11" gate="1" x="-15.24" y="104.14"/> <instance part="C1" gate="G$1" x="-162.56" y="91.44"/> <instance part="S3" gate="G$1" x="-66.04" y="134.62" rot="R180"/> -<instance part="R3" gate="G$1" x="-93.98" y="137.16" rot="R180"/> -<instance part="GND9" gate="1" x="-104.14" y="137.16" rot="R270"/> +<instance part="R3" gate="G$1" x="-27.94" y="134.62" rot="R180"/> +<instance part="GND9" gate="1" x="-17.78" y="134.62" rot="R90"/> <instance part="J3" gate="G$1" x="45.72" y="83.82" rot="R180"/> -<instance part="GND16" gate="1" x="15.24" y="91.44" rot="R270"/> +<instance part="GND16" gate="1" x="17.78" y="137.16" rot="R270"/> <instance part="+3V310" gate="G$1" x="17.78" y="88.9" rot="R90"/> <instance part="R6" gate="G$1" x="-71.12" y="157.48"/> <instance part="GND20" gate="1" x="-104.14" y="157.48" rot="R270"/> @@ -4534,72 +6339,90 @@ high speed (Philips)</description> <instance part="R2" gate="G$1" x="132.08" y="66.04" rot="R180"/> <instance part="GND2" gate="1" x="142.24" y="66.04" rot="R90"/> <instance part="C8" gate="G$1" x="127" y="55.88" rot="R90"/> -<instance part="C11" gate="G$1" x="-76.2" y="187.96" rot="R180"/> -<instance part="+3V6" gate="G$1" x="66.04" y="149.86" rot="R90"/> -<instance part="R4" gate="G$1" x="373.38" y="38.1" rot="R270"/> -<instance part="R5" gate="G$1" x="469.9" y="38.1" rot="R270"/> +<instance part="+3V6" gate="G$1" x="-101.6" y="-106.68" rot="R90"/> +<instance part="R4" gate="G$1" x="266.7" y="38.1" rot="R90"/> +<instance part="R5" gate="G$1" x="360.68" y="38.1" rot="R90"/> <instance part="U$4" gate="G$1" x="-55.88" y="157.48" rot="R270"/> <instance part="U$5" gate="G$1" x="-55.88" y="172.72" rot="R270"/> <instance part="R12" gate="G$1" x="-71.12" y="165.1"/> <instance part="U$8" gate="G$1" x="-45.72" y="165.1" rot="R270"/> -<instance part="J7" gate="G$1" x="304.8" y="78.74"/> -<instance part="J10" gate="G$1" x="411.48" y="78.74"/> -<instance part="J11" gate="G$1" x="510.54" y="78.74"/> -<instance part="U$9" gate="G$1" x="266.7" y="78.74"/> -<instance part="U$10" gate="G$1" x="373.38" y="78.74"/> -<instance part="U$11" gate="G$1" x="469.9" y="78.74"/> -<instance part="R13" gate="G$1" x="266.7" y="-96.52" rot="R90"/> -<instance part="R14" gate="G$1" x="266.7" y="-81.28" rot="R90"/> -<instance part="GND6" gate="1" x="266.7" y="-109.22"/> -<instance part="+3V8" gate="G$1" x="266.7" y="-68.58"/> +<instance part="J7" gate="G$1" x="304.8" y="68.58"/> +<instance part="J10" gate="G$1" x="398.78" y="68.58"/> +<instance part="J11" gate="G$1" x="497.84" y="68.58"/> +<instance part="GND6" gate="1" x="198.12" y="45.72"/> +<instance part="+3V8" gate="G$1" x="198.12" y="83.82"/> <instance part="+3V9" gate="G$1" x="-25.4" y="165.1" rot="R270"/> <instance part="BFC1" gate="G$1" x="297.18" y="144.78" rot="R270"/> -<instance part="R7" gate="G$1" x="66.04" y="139.7"/> -<instance part="R9" gate="G$1" x="78.74" y="144.78"/> -<instance part="C10" gate="G$1" x="304.8" y="142.24"/> -<instance part="C15" gate="G$1" x="312.42" y="142.24"/> -<instance part="U$14" gate="G$1" x="-106.68" y="-116.84"/> +<instance part="R7" gate="G$1" x="-48.26" y="-121.92"/> +<instance part="R9" gate="G$1" x="-48.26" y="-111.76"/> +<instance part="C10" gate="G$1" x="111.76" y="-38.1" rot="R270"/> +<instance part="C15" gate="G$1" x="320.04" y="142.24"/> <instance part="J13" gate="G$1" x="45.72" y="106.68" rot="R180"/> -<instance part="C18" gate="G$1" x="322.58" y="142.24"/> -<instance part="C21" gate="G$1" x="332.74" y="142.24"/> -<instance part="J1" gate="G$1" x="96.52" y="154.94"/> +<instance part="C18" gate="G$1" x="332.74" y="142.24"/> +<instance part="C21" gate="G$1" x="345.44" y="142.24"/> <instance part="U1" gate="G$1" x="-76.2" y="50.8"/> <instance part="J2" gate="G$1" x="-127" y="114.3" rot="R180"/> <instance part="Y1" gate="G$1" x="-114.3" y="50.8" rot="R270"/> -<instance part="C5" gate="G$1" x="-63.5" y="187.96" rot="R180"/> -<instance part="C7" gate="G$1" x="-50.8" y="187.96" rot="R180"/> -<instance part="GND1" gate="1" x="-104.14" y="182.88" rot="R270"/> -<instance part="+3V5" gate="G$1" x="-104.14" y="190.5" rot="R90"/> -<instance part="GND5" gate="1" x="63.5" y="154.94" rot="R270"/> +<instance part="GND5" gate="1" x="-101.6" y="-48.26" rot="R270"/> <instance part="+3V7" gate="G$1" x="-172.72" y="111.76" rot="R90"/> <instance part="GND7" gate="1" x="-172.72" y="116.84" rot="R270"/> <instance part="C9" gate="G$1" x="-111.76" y="91.44"/> -<instance part="J4" gate="G$1" x="284.48" y="170.18" rot="R180"/> -<instance part="U$1" gate="G$1" x="309.88" y="170.18"/> -<instance part="U$3" gate="G$1" x="309.88" y="154.94"/> +<instance part="U$1" gate="G$1" x="474.98" y="210.82"/> +<instance part="U$3" gate="G$1" x="-205.74" y="-215.9"/> +<instance part="U9" gate="G$1" x="215.9" y="68.58"/> +<instance part="P+1" gate="VCC" x="198.12" y="116.84"/> +<instance part="GND8" gate="1" x="198.12" y="104.14"/> +<instance part="J5" gate="G$1" x="208.28" y="111.76" rot="R180"/> +<instance part="Q1" gate="1" x="264.16" y="81.28"/> +<instance part="Q2" gate="1" x="264.16" y="60.96"/> +<instance part="Q3" gate="1" x="358.14" y="60.96"/> +<instance part="Q4" gate="1" x="358.14" y="81.28"/> +<instance part="Q5" gate="1" x="454.66" y="60.96"/> +<instance part="Q6" gate="1" x="454.66" y="81.28"/> +<instance part="J16" gate="G$1" x="284.48" y="127" rot="R180"/> +<instance part="J17" gate="G$1" x="284.48" y="119.38" rot="R180"/> +<instance part="J18" gate="G$1" x="284.48" y="111.76" rot="R180"/> +<instance part="J1" gate="G$1" x="-15.24" y="-91.44"/> +<instance part="U3" gate="G$1" x="-55.88" y="-76.2"/> +<instance part="R1" gate="G$1" x="-35.56" y="-55.88" rot="R90"/> +<instance part="R13" gate="G$1" x="-35.56" y="-83.82" rot="R90"/> +<instance part="U4" gate="G$1" x="-53.34" y="-162.56"/> +<instance part="L1" gate="G$1" x="-17.78" y="-160.02" rot="R270"/> +<instance part="U5" gate="G$1" x="53.34" y="-177.8"/> +<instance part="BFC2" gate="G$1" x="309.88" y="144.78" rot="R270"/> +<instance part="C22" gate="G$1" x="-35.56" y="-157.48"/> +<instance part="C23" gate="G$1" x="-78.74" y="-157.48"/> +<instance part="GND10" gate="1" x="-78.74" y="-200.66"/> +<instance part="+3V10" gate="G$1" x="91.44" y="-175.26" rot="R270"/> +<instance part="P+2" gate="VCC" x="-91.44" y="-152.4" rot="R90"/> +<instance part="P+4" gate="1" x="-101.6" y="-40.64" rot="R90"/> +<instance part="C27" gate="G$1" x="-83.82" y="-45.72"/> +<instance part="P+10" gate="1" x="91.44" y="-160.02" rot="R270"/> +<instance part="C30" gate="G$1" x="-2.54" y="-165.1"/> +<instance part="C34" gate="G$1" x="7.62" y="-165.1"/> +<instance part="C35" gate="G$1" x="17.78" y="-165.1"/> +<instance part="C36" gate="G$1" x="27.94" y="-165.1"/> +<instance part="C37" gate="G$1" x="68.58" y="-180.34"/> +<instance part="C38" gate="G$1" x="78.74" y="-180.34"/> +<instance part="J4" gate="G$1" x="45.72" y="142.24" rot="R180"/> +<instance part="J19" gate="G$1" x="45.72" y="124.46" rot="R180"/> +<instance part="R14" gate="G$1" x="198.12" y="55.88" rot="R90"/> +<instance part="J20" gate="G$1" x="190.5" y="71.12" rot="R270"/> +<instance part="C16" gate="G$1" x="45.72" y="35.56" rot="R180"/> +<instance part="J21" gate="1" x="444.5" y="48.26"/> +<instance part="Q7" gate="1" x="276.86" y="60.96"/> +<instance part="Q8" gate="1" x="276.86" y="81.28"/> +<instance part="Q9" gate="1" x="375.92" y="81.28"/> +<instance part="Q10" gate="1" x="375.92" y="60.96"/> +<instance part="Q11" gate="1" x="472.44" y="81.28"/> +<instance part="Q12" gate="1" x="472.44" y="60.96"/> +<instance part="C5" gate="G$1" x="358.14" y="142.24"/> </instances> <busses> </busses> <nets> <net name="GND" class="0"> <segment> -<pinref part="GND31" gate="1" pin="GND"/> -<wire x1="266.7" y1="48.26" x2="266.7" y2="35.56" width="0.1524" layer="91"/> -<wire x1="266.7" y1="48.26" x2="233.68" y2="48.26" width="0.1524" layer="91"/> -<label x="236.22" y="48.26" size="1.778" layer="95"/> -<wire x1="266.7" y1="48.26" x2="266.7" y2="53.34" width="0.1524" layer="91"/> -<junction x="266.7" y="48.26"/> -<pinref part="U2" gate="G$1" pin="SL_A"/> -<wire x1="114.3" y1="38.1" x2="233.68" y2="38.1" width="0.1524" layer="91"/> -<wire x1="233.68" y1="38.1" x2="233.68" y2="48.26" width="0.1524" layer="91"/> -<pinref part="U$9" gate="G$1" pin="GND"/> -</segment> -<segment> -<pinref part="GND34" gate="1" pin="GND"/> -<wire x1="373.38" y1="27.94" x2="373.38" y2="33.02" width="0.1524" layer="91"/> -<pinref part="R4" gate="G$1" pin="A"/> -</segment> -<segment> <pinref part="R27" gate="G$1" pin="1"/> <pinref part="GND32" gate="1" pin="GND"/> <wire x1="266.7" y1="-50.8" x2="266.7" y2="-53.34" width="0.1524" layer="91"/> @@ -4620,11 +6443,6 @@ high speed (Philips)</description> <junction x="320.04" y="-53.34"/> </segment> <segment> -<pinref part="GND38" gate="1" pin="GND"/> -<wire x1="469.9" y1="30.48" x2="469.9" y2="33.02" width="0.1524" layer="91"/> -<pinref part="R5" gate="G$1" pin="A"/> -</segment> -<segment> <pinref part="R37" gate="G$1" pin="1"/> <pinref part="GND39" gate="1" pin="GND"/> <wire x1="373.38" y1="-50.8" x2="373.38" y2="-53.34" width="0.1524" layer="91"/> @@ -4638,6 +6456,7 @@ high speed (Philips)</description> <pinref part="GND26" gate="1" pin="GND"/> <pinref part="U2" gate="G$1" pin="GNDPAD"/> <pinref part="C24" gate="G$1" pin="2"/> +<wire x1="96.52" y1="-45.72" x2="96.52" y2="-38.1" width="0.1524" layer="91"/> <wire x1="96.52" y1="-38.1" x2="96.52" y2="-27.94" width="0.1524" layer="91"/> <wire x1="96.52" y1="-27.94" x2="96.52" y2="-20.32" width="0.1524" layer="91"/> <wire x1="96.52" y1="-20.32" x2="96.52" y2="-10.16" width="0.1524" layer="91"/> @@ -4647,9 +6466,9 @@ high speed (Philips)</description> <pinref part="C26" gate="G$1" pin="2"/> <wire x1="109.22" y1="-27.94" x2="96.52" y2="-27.94" width="0.1524" layer="91"/> <junction x="96.52" y="-27.94"/> -<pinref part="C25" gate="G$1" pin="2"/> -<wire x1="109.22" y1="-20.32" x2="96.52" y2="-20.32" width="0.1524" layer="91"/> -<junction x="96.52" y="-20.32"/> +<pinref part="C10" gate="G$1" pin="2"/> +<wire x1="109.22" y1="-38.1" x2="96.52" y2="-38.1" width="0.1524" layer="91"/> +<junction x="96.52" y="-38.1"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="AGND"/> @@ -4667,54 +6486,39 @@ high speed (Philips)</description> <wire x1="48.26" y1="53.34" x2="33.02" y2="53.34" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="C44" gate="G$1" pin="2"/> -<pinref part="GND40" gate="1" pin="GND"/> -<wire x1="485.14" y1="109.22" x2="482.6" y2="109.22" width="0.1524" layer="91"/> -</segment> -<segment> -<pinref part="GND37" gate="1" pin="GND"/> -<pinref part="C42" gate="G$1" pin="2"/> -<wire x1="388.62" y1="109.22" x2="386.08" y2="109.22" width="0.1524" layer="91"/> -</segment> -<segment> -<pinref part="GND33" gate="1" pin="GND"/> -<pinref part="C40" gate="G$1" pin="2"/> -<wire x1="281.94" y1="109.22" x2="279.4" y2="109.22" width="0.1524" layer="91"/> -</segment> -<segment> -<pinref part="J9" gate="G$1" pin="PWRPAD"/> -<wire x1="289.56" y1="139.7" x2="297.18" y2="139.7" width="0.1524" layer="91"/> <pinref part="GND36" gate="1" pin="GND"/> -<pinref part="BFC1" gate="G$1" pin="2"/> -<wire x1="297.18" y1="139.7" x2="304.8" y2="139.7" width="0.1524" layer="91"/> -<junction x="297.18" y="139.7"/> -<pinref part="C10" gate="G$1" pin="2"/> -<wire x1="304.8" y1="139.7" x2="312.42" y2="139.7" width="0.1524" layer="91"/> -<junction x="304.8" y="139.7"/> <pinref part="C15" gate="G$1" pin="2"/> -<junction x="312.42" y="139.7"/> -<wire x1="312.42" y1="139.7" x2="322.58" y2="139.7" width="0.1524" layer="91"/> +<wire x1="320.04" y1="139.7" x2="332.74" y2="139.7" width="0.1524" layer="91"/> <pinref part="C18" gate="G$1" pin="2"/> -<wire x1="322.58" y1="139.7" x2="332.74" y2="139.7" width="0.1524" layer="91"/> -<junction x="322.58" y="139.7"/> -<pinref part="C21" gate="G$1" pin="2"/> -<wire x1="332.74" y1="139.7" x2="375.92" y2="139.7" width="0.1524" layer="91"/> +<wire x1="332.74" y1="139.7" x2="345.44" y2="139.7" width="0.1524" layer="91"/> <junction x="332.74" y="139.7"/> +<pinref part="C21" gate="G$1" pin="2"/> +<wire x1="345.44" y1="139.7" x2="358.14" y2="139.7" width="0.1524" layer="91"/> +<junction x="345.44" y="139.7"/> +<pinref part="BFC2" gate="G$1" pin="2"/> +<pinref part="BFC1" gate="G$1" pin="2"/> +<wire x1="358.14" y1="139.7" x2="373.38" y2="139.7" width="0.1524" layer="91"/> +<wire x1="297.18" y1="139.7" x2="309.88" y2="139.7" width="0.1524" layer="91"/> +<junction x="297.18" y="139.7"/> +<pinref part="J9" gate="G$1" pin="PWRPAD"/> +<wire x1="289.56" y1="139.7" x2="297.18" y2="139.7" width="0.1524" layer="91"/> +<wire x1="309.88" y1="139.7" x2="320.04" y2="139.7" width="0.1524" layer="91"/> +<junction x="309.88" y="139.7"/> +<junction x="320.04" y="139.7"/> +<pinref part="C5" gate="G$1" pin="2"/> +<junction x="358.14" y="139.7"/> </segment> <segment> -<pinref part="C16" gate="G$1" pin="1"/> <pinref part="C13" gate="G$1" pin="1"/> <wire x1="45.72" y1="30.48" x2="35.56" y2="30.48" width="0.1524" layer="91"/> <wire x1="35.56" y1="30.48" x2="27.94" y2="30.48" width="0.1524" layer="91"/> <junction x="35.56" y="30.48"/> <pinref part="GND13" gate="1" pin="GND"/> +<pinref part="C16" gate="G$1" pin="1"/> </segment> <segment> -<pinref part="C17" gate="G$1" pin="1"/> <pinref part="C14" gate="G$1" pin="1"/> -<wire x1="48.26" y1="5.08" x2="38.1" y2="5.08" width="0.1524" layer="91"/> -<wire x1="38.1" y1="5.08" x2="27.94" y2="5.08" width="0.1524" layer="91"/> -<junction x="38.1" y="5.08"/> +<wire x1="45.72" y1="5.08" x2="27.94" y2="5.08" width="0.1524" layer="91"/> <pinref part="GND14" gate="1" pin="GND"/> <label x="27.94" y="5.08" size="1.778" layer="95"/> </segment> @@ -4757,16 +6561,6 @@ high speed (Philips)</description> <wire x1="-15.24" y1="106.68" x2="-15.24" y2="109.22" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="R3" gate="G$1" pin="2"/> -<pinref part="GND9" gate="1" pin="GND"/> -<wire x1="-101.6" y1="137.16" x2="-99.06" y2="137.16" width="0.1524" layer="91"/> -</segment> -<segment> -<wire x1="40.64" y1="91.44" x2="17.78" y2="91.44" width="0.1524" layer="91"/> -<pinref part="J3" gate="G$1" pin="1"/> -<pinref part="GND16" gate="1" pin="GND"/> -</segment> -<segment> <pinref part="GND2" gate="1" pin="GND"/> <pinref part="R2" gate="G$1" pin="1"/> <wire x1="139.7" y1="66.04" x2="137.16" y2="66.04" width="0.1524" layer="91"/> @@ -4779,7 +6573,7 @@ high speed (Philips)</description> <segment> <pinref part="GND25" gate="1" pin="GND"/> <pinref part="J6" gate="A" pin="1"/> -<wire x1="68.58" y1="116.84" x2="91.44" y2="116.84" width="0.1524" layer="91"/> +<wire x1="66.04" y1="132.08" x2="88.9" y2="132.08" width="0.1524" layer="91"/> </segment> <segment> <pinref part="GND20" gate="1" pin="GND"/> @@ -4787,27 +6581,6 @@ high speed (Philips)</description> <wire x1="-101.6" y1="157.48" x2="-76.2" y2="157.48" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="R13" gate="G$1" pin="1"/> -<pinref part="GND6" gate="1" pin="GND"/> -<wire x1="266.7" y1="-101.6" x2="266.7" y2="-106.68" width="0.1524" layer="91"/> -</segment> -<segment> -<pinref part="C7" gate="G$1" pin="1"/> -<pinref part="C5" gate="G$1" pin="1"/> -<wire x1="-50.8" y1="182.88" x2="-63.5" y2="182.88" width="0.1524" layer="91"/> -<pinref part="C11" gate="G$1" pin="1"/> -<wire x1="-63.5" y1="182.88" x2="-76.2" y2="182.88" width="0.1524" layer="91"/> -<junction x="-63.5" y="182.88"/> -<wire x1="-76.2" y1="182.88" x2="-101.6" y2="182.88" width="0.1524" layer="91"/> -<junction x="-76.2" y="182.88"/> -<pinref part="GND1" gate="1" pin="GND"/> -</segment> -<segment> -<pinref part="GND5" gate="1" pin="GND"/> -<pinref part="J1" gate="G$1" pin="GND"/> -<wire x1="66.04" y1="154.94" x2="91.44" y2="154.94" width="0.1524" layer="91"/> -</segment> -<segment> <pinref part="J2" gate="G$1" pin="GND"/> <wire x1="-142.24" y1="116.84" x2="-144.78" y2="116.84" width="0.1524" layer="91"/> <pinref part="GND7" gate="1" pin="GND"/> @@ -4822,6 +6595,110 @@ high speed (Philips)</description> <pinref part="Y1" gate="G$1" pin="2"/> <wire x1="-170.18" y1="50.8" x2="-121.92" y2="50.8" width="0.1524" layer="91"/> </segment> +<segment> +<pinref part="GND8" gate="1" pin="GND"/> +<wire x1="198.12" y1="106.68" x2="198.12" y2="109.22" width="0.1524" layer="91"/> +<pinref part="J5" gate="G$1" pin="2"/> +<wire x1="198.12" y1="109.22" x2="200.66" y2="109.22" width="0.1524" layer="91"/> +</segment> +<segment> +<pinref part="U4" gate="G$1" pin="GND"/> +<pinref part="GND10" gate="1" pin="GND"/> +<wire x1="-68.58" y1="-167.64" x2="-78.74" y2="-167.64" width="0.1524" layer="91"/> +<wire x1="-78.74" y1="-167.64" x2="-78.74" y2="-170.18" width="0.1524" layer="91"/> +<pinref part="U4" gate="G$1" pin="PGND"/> +<wire x1="-78.74" y1="-170.18" x2="-78.74" y2="-190.5" width="0.1524" layer="91"/> +<wire x1="-78.74" y1="-190.5" x2="-78.74" y2="-198.12" width="0.1524" layer="91"/> +<wire x1="-68.58" y1="-170.18" x2="-78.74" y2="-170.18" width="0.1524" layer="91"/> +<junction x="-78.74" y="-170.18"/> +<pinref part="C23" gate="G$1" pin="2"/> +<wire x1="-78.74" y1="-167.64" x2="-78.74" y2="-160.02" width="0.1524" layer="91"/> +<junction x="-78.74" y="-167.64"/> +<pinref part="U5" gate="G$1" pin="GND"/> +<wire x1="53.34" y1="-187.96" x2="53.34" y2="-190.5" width="0.1524" layer="91"/> +<wire x1="53.34" y1="-190.5" x2="-2.54" y2="-190.5" width="0.1524" layer="91"/> +<junction x="-78.74" y="-190.5"/> +<pinref part="C37" gate="G$1" pin="2"/> +<wire x1="-2.54" y1="-190.5" x2="-78.74" y2="-190.5" width="0.1524" layer="91"/> +<wire x1="68.58" y1="-182.88" x2="68.58" y2="-190.5" width="0.1524" layer="91"/> +<wire x1="68.58" y1="-190.5" x2="53.34" y2="-190.5" width="0.1524" layer="91"/> +<junction x="53.34" y="-190.5"/> +<pinref part="C38" gate="G$1" pin="2"/> +<wire x1="78.74" y1="-182.88" x2="78.74" y2="-190.5" width="0.1524" layer="91"/> +<wire x1="78.74" y1="-190.5" x2="68.58" y2="-190.5" width="0.1524" layer="91"/> +<junction x="68.58" y="-190.5"/> +<pinref part="C36" gate="G$1" pin="2"/> +<pinref part="C35" gate="G$1" pin="2"/> +<wire x1="27.94" y1="-167.64" x2="17.78" y2="-167.64" width="0.1524" layer="91"/> +<pinref part="C34" gate="G$1" pin="2"/> +<wire x1="17.78" y1="-167.64" x2="7.62" y2="-167.64" width="0.1524" layer="91"/> +<junction x="17.78" y="-167.64"/> +<pinref part="C30" gate="G$1" pin="2"/> +<wire x1="7.62" y1="-167.64" x2="-2.54" y2="-167.64" width="0.1524" layer="91"/> +<junction x="7.62" y="-167.64"/> +<wire x1="-2.54" y1="-167.64" x2="-2.54" y2="-190.5" width="0.1524" layer="91"/> +<junction x="-2.54" y="-167.64"/> +<junction x="-2.54" y="-190.5"/> +</segment> +<segment> +<pinref part="U3" gate="G$1" pin="GND"/> +<pinref part="C27" gate="G$1" pin="2"/> +<wire x1="-73.66" y1="-48.26" x2="-83.82" y2="-48.26" width="0.1524" layer="91"/> +<pinref part="GND5" gate="1" pin="GND"/> +<wire x1="-83.82" y1="-48.26" x2="-99.06" y2="-48.26" width="0.1524" layer="91"/> +<junction x="-83.82" y="-48.26"/> +</segment> +<segment> +<pinref part="J4" gate="G$1" pin="4"/> +<wire x1="40.64" y1="137.16" x2="38.1" y2="137.16" width="0.1524" layer="91"/> +<wire x1="38.1" y1="137.16" x2="38.1" y2="139.7" width="0.1524" layer="91"/> +<pinref part="J4" gate="G$1" pin="3"/> +<wire x1="38.1" y1="139.7" x2="40.64" y2="139.7" width="0.1524" layer="91"/> +<pinref part="J4" gate="G$1" pin="2"/> +<wire x1="40.64" y1="142.24" x2="38.1" y2="142.24" width="0.1524" layer="91"/> +<wire x1="38.1" y1="142.24" x2="38.1" y2="139.7" width="0.1524" layer="91"/> +<junction x="38.1" y="139.7"/> +<pinref part="J4" gate="G$1" pin="1"/> +<wire x1="40.64" y1="144.78" x2="38.1" y2="144.78" width="0.1524" layer="91"/> +<wire x1="38.1" y1="144.78" x2="38.1" y2="142.24" width="0.1524" layer="91"/> +<junction x="38.1" y="142.24"/> +<pinref part="GND16" gate="1" pin="GND"/> +<wire x1="38.1" y1="137.16" x2="20.32" y2="137.16" width="0.1524" layer="91"/> +<junction x="38.1" y="137.16"/> +</segment> +<segment> +<pinref part="R3" gate="G$1" pin="1"/> +<pinref part="GND9" gate="1" pin="GND"/> +<wire x1="-20.32" y1="134.62" x2="-22.86" y2="134.62" width="0.1524" layer="91"/> +</segment> +<segment> +<pinref part="R14" gate="G$1" pin="1"/> +<pinref part="GND6" gate="1" pin="GND"/> +<wire x1="198.12" y1="50.8" x2="198.12" y2="48.26" width="0.1524" layer="91"/> +</segment> +<segment> +<wire x1="457.2" y1="53.34" x2="457.2" y2="55.88" width="0.1524" layer="91"/> +<pinref part="Q5" gate="1" pin="S"/> +<wire x1="457.2" y1="53.34" x2="457.2" y2="50.8" width="0.1524" layer="91"/> +<pinref part="J21" gate="1" pin="P$2"/> +<wire x1="457.2" y1="50.8" x2="457.2" y2="48.26" width="0.1524" layer="91"/> +<pinref part="GND38" gate="1" pin="GND"/> +<wire x1="457.2" y1="48.26" x2="457.2" y2="22.86" width="0.1524" layer="91"/> +<junction x="457.2" y="48.26"/> +<pinref part="Q12" gate="1" pin="S"/> +<wire x1="474.98" y1="55.88" x2="457.2" y2="55.88" width="0.1524" layer="91"/> +<junction x="457.2" y="55.88"/> +</segment> +<segment> +<pinref part="GND31" gate="1" pin="GND"/> +<pinref part="R4" gate="G$1" pin="B"/> +<wire x1="266.7" y1="27.94" x2="266.7" y2="30.48" width="0.1524" layer="91"/> +</segment> +<segment> +<pinref part="GND34" gate="1" pin="GND"/> +<pinref part="R5" gate="G$1" pin="B"/> +<wire x1="360.68" y1="27.94" x2="360.68" y2="30.48" width="0.1524" layer="91"/> +</segment> </net> <net name="+3V3" class="0"> <segment> @@ -4859,15 +6736,10 @@ high speed (Philips)</description> </segment> <segment> <pinref part="J6" gate="A" pin="2"/> -<wire x1="91.44" y1="114.3" x2="73.66" y2="114.3" width="0.1524" layer="91"/> +<wire x1="88.9" y1="129.54" x2="71.12" y2="129.54" width="0.1524" layer="91"/> <pinref part="+3V316" gate="G$1" pin="+3V3"/> </segment> <segment> -<pinref part="L1" gate="G$1" pin="2"/> -<wire x1="5.08" y1="116.84" x2="10.16" y2="116.84" width="0.1524" layer="91"/> -<pinref part="+3V38" gate="G$1" pin="+3V3"/> -</segment> -<segment> <wire x1="40.64" y1="88.9" x2="20.32" y2="88.9" width="0.1524" layer="91"/> <pinref part="J3" gate="G$1" pin="2"/> <pinref part="+3V310" gate="G$1" pin="+3V3"/> @@ -4898,11 +6770,6 @@ high speed (Philips)</description> <wire x1="40.64" y1="48.26" x2="25.4" y2="48.26" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="R14" gate="G$1" pin="2"/> -<wire x1="266.7" y1="-76.2" x2="266.7" y2="-71.12" width="0.1524" layer="91"/> -<pinref part="+3V8" gate="G$1" pin="+3V3"/> -</segment> -<segment> <pinref part="U$5" gate="G$1" pin="A"/> <wire x1="-50.8" y1="172.72" x2="-33.02" y2="172.72" width="0.1524" layer="91"/> <wire x1="-33.02" y1="172.72" x2="-33.02" y2="165.1" width="0.1524" layer="91"/> @@ -4916,25 +6783,48 @@ high speed (Philips)</description> <wire x1="-27.94" y1="165.1" x2="-33.02" y2="165.1" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="C7" gate="G$1" pin="2"/> -<pinref part="C5" gate="G$1" pin="2"/> -<wire x1="-50.8" y1="190.5" x2="-63.5" y2="190.5" width="0.1524" layer="91"/> -<pinref part="C11" gate="G$1" pin="2"/> -<wire x1="-63.5" y1="190.5" x2="-76.2" y2="190.5" width="0.1524" layer="91"/> -<junction x="-63.5" y="190.5"/> -<wire x1="-76.2" y1="190.5" x2="-101.6" y2="190.5" width="0.1524" layer="91"/> -<junction x="-76.2" y="190.5"/> -<pinref part="+3V5" gate="G$1" pin="+3V3"/> +<pinref part="J2" gate="G$1" pin="VCC"/> +<wire x1="-142.24" y1="111.76" x2="-170.18" y2="111.76" width="0.1524" layer="91"/> +<pinref part="+3V7" gate="G$1" pin="+3V3"/> </segment> <segment> -<pinref part="J1" gate="G$1" pin="3V3"/> -<pinref part="+3V6" gate="G$1" pin="+3V3"/> -<wire x1="91.44" y1="149.86" x2="68.58" y2="149.86" width="0.1524" layer="91"/> +<pinref part="C12" gate="G$1" pin="1"/> +<wire x1="-10.16" y1="116.84" x2="-15.24" y2="116.84" width="0.1524" layer="91"/> +<wire x1="-15.24" y1="116.84" x2="-50.8" y2="116.84" width="0.1524" layer="91"/> +<junction x="-15.24" y="116.84"/> +<pinref part="U1" gate="G$1" pin="PA0/AREF"/> +<pinref part="+3V38" gate="G$1" pin="+3V3"/> </segment> <segment> -<pinref part="J2" gate="G$1" pin="VCC"/> -<wire x1="-142.24" y1="111.76" x2="-170.18" y2="111.76" width="0.1524" layer="91"/> -<pinref part="+3V7" gate="G$1" pin="+3V3"/> +<pinref part="U5" gate="G$1" pin="VOUT"/> +<pinref part="+3V10" gate="G$1" pin="+3V3"/> +<wire x1="66.04" y1="-175.26" x2="68.58" y2="-175.26" width="0.1524" layer="91"/> +<pinref part="C37" gate="G$1" pin="1"/> +<wire x1="68.58" y1="-175.26" x2="78.74" y2="-175.26" width="0.1524" layer="91"/> +<junction x="68.58" y="-175.26"/> +<pinref part="C38" gate="G$1" pin="1"/> +<wire x1="78.74" y1="-175.26" x2="88.9" y2="-175.26" width="0.1524" layer="91"/> +<junction x="78.74" y="-175.26"/> +</segment> +<segment> +<pinref part="+3V6" gate="G$1" pin="+3V3"/> +<pinref part="J1" gate="G$1" pin="3V3-LED"/> +<wire x1="-99.06" y1="-106.68" x2="-78.74" y2="-106.68" width="0.1524" layer="91"/> +<pinref part="U3" gate="G$1" pin="1DE"/> +<wire x1="-78.74" y1="-106.68" x2="-25.4" y2="-106.68" width="0.1524" layer="91"/> +<wire x1="-73.66" y1="-66.04" x2="-78.74" y2="-66.04" width="0.1524" layer="91"/> +<wire x1="-78.74" y1="-66.04" x2="-78.74" y2="-93.98" width="0.1524" layer="91"/> +<junction x="-78.74" y="-106.68"/> +<pinref part="U3" gate="G$1" pin="2DE"/> +<wire x1="-78.74" y1="-93.98" x2="-78.74" y2="-106.68" width="0.1524" layer="91"/> +<wire x1="-73.66" y1="-93.98" x2="-78.74" y2="-93.98" width="0.1524" layer="91"/> +<junction x="-78.74" y="-93.98"/> +</segment> +<segment> +<pinref part="U9" gate="G$1" pin="TERM1"/> +<wire x1="203.2" y1="73.66" x2="198.12" y2="73.66" width="0.1524" layer="91"/> +<pinref part="+3V8" gate="G$1" pin="+3V3"/> +<wire x1="198.12" y1="73.66" x2="198.12" y2="81.28" width="0.1524" layer="91"/> </segment> </net> <net name="DC-CAL" class="0"> @@ -5043,91 +6933,119 @@ high speed (Philips)</description> <wire x1="134.62" y1="40.64" x2="134.62" y2="43.18" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="U$9" gate="G$1" pin="VSW"/> +<wire x1="266.7" y1="68.58" x2="228.6" y2="68.58" width="0.1524" layer="91"/> +<label x="236.22" y="68.58" size="1.778" layer="95"/> +<wire x1="266.7" y1="76.2" x2="266.7" y2="73.66" width="0.1524" layer="91"/> +<wire x1="266.7" y1="73.66" x2="266.7" y2="68.58" width="0.1524" layer="91"/> +<wire x1="266.7" y1="68.58" x2="266.7" y2="66.04" width="0.1524" layer="91"/> +<junction x="266.7" y="68.58"/> <pinref part="J7" gate="G$1" pin="PWRPAD"/> -<wire x1="281.94" y1="78.74" x2="299.72" y2="78.74" width="0.1524" layer="91"/> -<label x="284.48" y="78.74" size="1.778" layer="95"/> -</segment> -<segment> -<pinref part="U$9" gate="G$1" pin="SH"/> -<wire x1="246.38" y1="78.74" x2="220.98" y2="78.74" width="0.1524" layer="91"/> -<label x="220.98" y="78.74" size="1.778" layer="95"/> +<wire x1="266.7" y1="68.58" x2="279.4" y2="68.58" width="0.1524" layer="91"/> +<label x="284.48" y="68.58" size="1.778" layer="95"/> +<pinref part="Q1" gate="1" pin="S"/> +<pinref part="Q2" gate="1" pin="D"/> +<pinref part="U9" gate="G$1" pin="SENSE"/> +<pinref part="Q8" gate="1" pin="S"/> +<wire x1="279.4" y1="68.58" x2="299.72" y2="68.58" width="0.1524" layer="91"/> +<wire x1="279.4" y1="76.2" x2="279.4" y2="68.58" width="0.1524" layer="91"/> +<junction x="279.4" y="68.58"/> +<pinref part="Q7" gate="1" pin="D"/> +<wire x1="279.4" y1="66.04" x2="279.4" y2="68.58" width="0.1524" layer="91"/> </segment> </net> <net name="VCC" class="0"> <segment> <pinref part="P+6" gate="VCC" pin="VCC"/> -<wire x1="373.38" y1="114.3" x2="373.38" y2="109.22" width="0.1524" layer="91"/> -<wire x1="378.46" y1="109.22" x2="373.38" y2="109.22" width="0.1524" layer="91"/> -<pinref part="C42" gate="G$1" pin="1"/> -<pinref part="U$10" gate="G$1" pin="VIN"/> -<wire x1="373.38" y1="102.87" x2="373.38" y2="109.22" width="0.1524" layer="91"/> -<junction x="373.38" y="109.22"/> +<wire x1="360.68" y1="99.06" x2="360.68" y2="93.98" width="0.1524" layer="91"/> +<wire x1="360.68" y1="86.36" x2="360.68" y2="93.98" width="0.1524" layer="91"/> +<pinref part="Q4" gate="1" pin="D"/> +<pinref part="Q9" gate="1" pin="D"/> +<wire x1="378.46" y1="86.36" x2="360.68" y2="86.36" width="0.1524" layer="91"/> +<junction x="360.68" y="86.36"/> </segment> <segment> <pinref part="P+8" gate="VCC" pin="VCC"/> -<wire x1="469.9" y1="114.3" x2="469.9" y2="109.22" width="0.1524" layer="91"/> -<wire x1="474.98" y1="109.22" x2="469.9" y2="109.22" width="0.1524" layer="91"/> -<pinref part="C44" gate="G$1" pin="1"/> -<pinref part="U$11" gate="G$1" pin="VIN"/> -<wire x1="469.9" y1="102.87" x2="469.9" y2="109.22" width="0.1524" layer="91"/> -<junction x="469.9" y="109.22"/> +<wire x1="457.2" y1="99.06" x2="457.2" y2="93.98" width="0.1524" layer="91"/> +<wire x1="457.2" y1="86.36" x2="457.2" y2="93.98" width="0.1524" layer="91"/> +<pinref part="Q6" gate="1" pin="D"/> +<pinref part="Q11" gate="1" pin="D"/> +<wire x1="474.98" y1="86.36" x2="457.2" y2="86.36" width="0.1524" layer="91"/> +<junction x="457.2" y="86.36"/> </segment> <segment> <pinref part="P+5" gate="VCC" pin="VCC"/> -<wire x1="266.7" y1="109.22" x2="266.7" y2="114.3" width="0.1524" layer="91"/> -<wire x1="271.78" y1="109.22" x2="266.7" y2="109.22" width="0.1524" layer="91"/> -<pinref part="C40" gate="G$1" pin="1"/> -<pinref part="U$9" gate="G$1" pin="VIN"/> -<wire x1="266.7" y1="102.87" x2="266.7" y2="109.22" width="0.1524" layer="91"/> -<junction x="266.7" y="109.22"/> +<wire x1="266.7" y1="93.98" x2="266.7" y2="99.06" width="0.1524" layer="91"/> +<wire x1="266.7" y1="86.36" x2="266.7" y2="88.9" width="0.1524" layer="91"/> +<pinref part="Q1" gate="1" pin="D"/> +<wire x1="266.7" y1="88.9" x2="266.7" y2="93.98" width="0.1524" layer="91"/> +<pinref part="Q8" gate="1" pin="D"/> +<wire x1="279.4" y1="86.36" x2="266.7" y2="86.36" width="0.1524" layer="91"/> +<junction x="266.7" y="86.36"/> +</segment> +<segment> +<pinref part="P+7" gate="VCC" pin="VCC"/> +<pinref part="C15" gate="G$1" pin="1"/> +<wire x1="320.04" y1="147.32" x2="332.74" y2="147.32" width="0.1524" layer="91"/> +<pinref part="C18" gate="G$1" pin="1"/> +<wire x1="332.74" y1="147.32" x2="345.44" y2="147.32" width="0.1524" layer="91"/> +<junction x="332.74" y="147.32"/> +<pinref part="C21" gate="G$1" pin="1"/> +<wire x1="345.44" y1="147.32" x2="358.14" y2="147.32" width="0.1524" layer="91"/> +<junction x="345.44" y="147.32"/> +<pinref part="BFC2" gate="G$1" pin="1"/> +<pinref part="BFC1" gate="G$1" pin="1"/> +<wire x1="358.14" y1="147.32" x2="373.38" y2="147.32" width="0.1524" layer="91"/> +<wire x1="297.18" y1="147.32" x2="309.88" y2="147.32" width="0.1524" layer="91"/> +<junction x="297.18" y="147.32"/> +<pinref part="J8" gate="G$1" pin="PWRPAD"/> +<wire x1="289.56" y1="147.32" x2="297.18" y2="147.32" width="0.1524" layer="91"/> +<wire x1="320.04" y1="147.32" x2="309.88" y2="147.32" width="0.1524" layer="91"/> +<junction x="320.04" y="147.32"/> +<junction x="309.88" y="147.32"/> +<pinref part="C5" gate="G$1" pin="1"/> +<junction x="358.14" y="147.32"/> +</segment> +<segment> +<pinref part="R38" gate="G$1" pin="2"/> +<wire x1="426.72" y1="-25.4" x2="426.72" y2="-20.32" width="0.1524" layer="91"/> +<pinref part="P+9" gate="VCC" pin="VCC"/> +</segment> +<segment> +<pinref part="J5" gate="G$1" pin="1"/> +<wire x1="200.66" y1="111.76" x2="198.12" y2="111.76" width="0.1524" layer="91"/> +<pinref part="P+1" gate="VCC" pin="VCC"/> +<wire x1="198.12" y1="111.76" x2="198.12" y2="114.3" width="0.1524" layer="91"/> +</segment> +<segment> +<pinref part="U4" gate="G$1" pin="VCC"/> +<pinref part="C23" gate="G$1" pin="1"/> +<wire x1="-68.58" y1="-152.4" x2="-78.74" y2="-152.4" width="0.1524" layer="91"/> +<wire x1="-78.74" y1="-152.4" x2="-88.9" y2="-152.4" width="0.1524" layer="91"/> +<junction x="-78.74" y="-152.4"/> +<pinref part="P+2" gate="VCC" pin="VCC"/> </segment> <segment> <pinref part="C26" gate="G$1" pin="1"/> <pinref part="C24" gate="G$1" pin="1"/> <wire x1="116.84" y1="-27.94" x2="116.84" y2="-20.32" width="0.1524" layer="91"/> -<junction x="116.84" y="-27.94"/> <wire x1="116.84" y1="-20.32" x2="116.84" y2="-10.16" width="0.1524" layer="91"/> <wire x1="116.84" y1="-10.16" x2="116.84" y2="0" width="0.1524" layer="91"/> <junction x="116.84" y="-10.16"/> <pinref part="U2" gate="G$1" pin="PVDD1"/> <wire x1="116.84" y1="0" x2="114.3" y2="0" width="0.1524" layer="91"/> +<wire x1="116.84" y1="-45.72" x2="116.84" y2="-38.1" width="0.1524" layer="91"/> +<junction x="116.84" y="-27.94"/> <pinref part="P+3" gate="VCC" pin="VCC"/> -<wire x1="116.84" y1="-27.94" x2="116.84" y2="-40.64" width="0.1524" layer="91"/> -<pinref part="C25" gate="G$1" pin="1"/> -<junction x="116.84" y="-20.32"/> -</segment> -<segment> -<pinref part="J8" gate="G$1" pin="PWRPAD"/> -<wire x1="289.56" y1="147.32" x2="297.18" y2="147.32" width="0.1524" layer="91"/> -<pinref part="P+7" gate="VCC" pin="VCC"/> -<pinref part="BFC1" gate="G$1" pin="1"/> -<wire x1="297.18" y1="147.32" x2="304.8" y2="147.32" width="0.1524" layer="91"/> -<junction x="297.18" y="147.32"/> <pinref part="C10" gate="G$1" pin="1"/> -<wire x1="304.8" y1="147.32" x2="312.42" y2="147.32" width="0.1524" layer="91"/> -<junction x="304.8" y="147.32"/> -<pinref part="C15" gate="G$1" pin="1"/> -<junction x="312.42" y="147.32"/> -<wire x1="312.42" y1="147.32" x2="322.58" y2="147.32" width="0.1524" layer="91"/> -<pinref part="C18" gate="G$1" pin="1"/> -<wire x1="322.58" y1="147.32" x2="332.74" y2="147.32" width="0.1524" layer="91"/> -<junction x="322.58" y="147.32"/> -<pinref part="C21" gate="G$1" pin="1"/> -<wire x1="332.74" y1="147.32" x2="375.92" y2="147.32" width="0.1524" layer="91"/> -<junction x="332.74" y="147.32"/> -</segment> -<segment> -<pinref part="R38" gate="G$1" pin="2"/> -<wire x1="426.72" y1="-25.4" x2="426.72" y2="-20.32" width="0.1524" layer="91"/> -<pinref part="P+9" gate="VCC" pin="VCC"/> +<wire x1="116.84" y1="-38.1" x2="116.84" y2="-27.94" width="0.1524" layer="91"/> +<junction x="116.84" y="-38.1"/> </segment> </net> <net name="DRV-HI-U" class="0"> <segment> <pinref part="R24" gate="G$1" pin="1"/> -<wire x1="231.14" y1="88.9" x2="220.98" y2="88.9" width="0.1524" layer="91"/> -<label x="220.98" y="88.9" size="1.778" layer="95"/> +<wire x1="246.38" y1="78.74" x2="236.22" y2="78.74" width="0.1524" layer="91"/> +<label x="236.22" y="78.74" size="1.778" layer="95"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="GH_A"/> @@ -5138,8 +7056,8 @@ high speed (Philips)</description> <net name="DRV-LO-U" class="0"> <segment> <pinref part="R25" gate="G$1" pin="1"/> -<wire x1="231.14" y1="68.58" x2="220.98" y2="68.58" width="0.1524" layer="91"/> -<label x="220.98" y="68.58" size="1.778" layer="95"/> +<wire x1="246.38" y1="58.42" x2="236.22" y2="58.42" width="0.1524" layer="91"/> +<label x="236.22" y="58.42" size="1.778" layer="95"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="GL_A"/> @@ -5149,13 +7067,16 @@ high speed (Philips)</description> </net> <net name="SL-V" class="0"> <segment> -<wire x1="373.38" y1="45.72" x2="373.38" y2="50.8" width="0.1524" layer="91"/> -<wire x1="373.38" y1="50.8" x2="342.9" y2="50.8" width="0.1524" layer="91"/> -<label x="342.9" y="50.8" size="1.778" layer="95"/> -<pinref part="R4" gate="G$1" pin="B"/> -<pinref part="U$10" gate="G$1" pin="GND"/> -<wire x1="373.38" y1="53.34" x2="373.38" y2="50.8" width="0.1524" layer="91"/> -<junction x="373.38" y="50.8"/> +<wire x1="360.68" y1="50.8" x2="330.2" y2="50.8" width="0.1524" layer="91"/> +<label x="330.2" y="50.8" size="1.778" layer="95"/> +<wire x1="360.68" y1="50.8" x2="360.68" y2="55.88" width="0.1524" layer="91"/> +<pinref part="Q3" gate="1" pin="S"/> +<pinref part="R5" gate="G$1" pin="A"/> +<wire x1="360.68" y1="43.18" x2="360.68" y2="50.8" width="0.1524" layer="91"/> +<junction x="360.68" y="50.8"/> +<pinref part="Q10" gate="1" pin="S"/> +<wire x1="378.46" y1="55.88" x2="360.68" y2="55.88" width="0.1524" layer="91"/> +<junction x="360.68" y="55.88"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="SL_B"/> @@ -5165,26 +7086,26 @@ high speed (Philips)</description> </net> <net name="SHNT-V-HI" class="0"> <segment> -<wire x1="370.84" y1="45.72" x2="342.9" y2="45.72" width="0.1524" layer="91"/> -<label x="342.9" y="45.72" size="1.778" layer="95"/> -<pinref part="R4" gate="G$1" pin="SB"/> +<pinref part="R20" gate="G$1" pin="1"/> +<wire x1="152.4" y1="-5.08" x2="160.02" y2="-5.08" width="0.1524" layer="91"/> +<label x="152.4" y="-5.08" size="1.778" layer="95"/> </segment> <segment> -<pinref part="R18" gate="G$1" pin="1"/> -<wire x1="152.4" y1="10.16" x2="160.02" y2="10.16" width="0.1524" layer="91"/> -<label x="152.4" y="10.16" size="1.778" layer="95"/> +<pinref part="R5" gate="G$1" pin="SA"/> +<wire x1="363.22" y1="43.18" x2="378.46" y2="43.18" width="0.1524" layer="91"/> +<label x="365.76" y="43.18" size="1.778" layer="95"/> </segment> </net> <net name="SHNT-V-LO" class="0"> <segment> -<wire x1="370.84" y1="33.02" x2="342.9" y2="33.02" width="0.1524" layer="91"/> -<label x="342.9" y="33.02" size="1.778" layer="95"/> -<pinref part="R4" gate="G$1" pin="SA"/> +<pinref part="R21" gate="G$1" pin="1"/> +<wire x1="152.4" y1="-12.7" x2="160.02" y2="-12.7" width="0.1524" layer="91"/> +<label x="152.4" y="-12.7" size="1.778" layer="95"/> </segment> <segment> -<pinref part="R19" gate="G$1" pin="1"/> -<wire x1="152.4" y1="2.54" x2="160.02" y2="2.54" width="0.1524" layer="91"/> -<label x="152.4" y="2.54" size="1.778" layer="95"/> +<pinref part="R5" gate="G$1" pin="SB"/> +<wire x1="363.22" y1="30.48" x2="378.46" y2="30.48" width="0.1524" layer="91"/> +<label x="365.76" y="30.48" size="1.778" layer="95"/> </segment> </net> <net name="PHASE-V" class="0"> @@ -5203,22 +7124,31 @@ high speed (Philips)</description> <wire x1="134.62" y1="27.94" x2="134.62" y2="30.48" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="U$10" gate="G$1" pin="VSW"/> <pinref part="J10" gate="G$1" pin="PWRPAD"/> -<wire x1="388.62" y1="78.74" x2="406.4" y2="78.74" width="0.1524" layer="91"/> -<label x="391.16" y="78.74" size="1.778" layer="95"/> -</segment> -<segment> -<pinref part="U$10" gate="G$1" pin="SH"/> -<wire x1="353.06" y1="78.74" x2="327.66" y2="78.74" width="0.1524" layer="91"/> -<label x="327.66" y="78.74" size="1.778" layer="95"/> +<wire x1="375.92" y1="68.58" x2="378.46" y2="68.58" width="0.1524" layer="91"/> +<label x="378.46" y="68.58" size="1.778" layer="95"/> +<wire x1="378.46" y1="68.58" x2="393.7" y2="68.58" width="0.1524" layer="91"/> +<wire x1="355.6" y1="68.58" x2="330.2" y2="68.58" width="0.1524" layer="91"/> +<label x="330.2" y="68.58" size="1.778" layer="95"/> +<wire x1="375.92" y1="68.58" x2="360.68" y2="68.58" width="0.1524" layer="91"/> +<wire x1="360.68" y1="68.58" x2="355.6" y2="68.58" width="0.1524" layer="91"/> +<wire x1="360.68" y1="66.04" x2="360.68" y2="68.58" width="0.1524" layer="91"/> +<junction x="360.68" y="68.58"/> +<wire x1="360.68" y1="68.58" x2="360.68" y2="76.2" width="0.1524" layer="91"/> +<pinref part="Q3" gate="1" pin="D"/> +<pinref part="Q4" gate="1" pin="S"/> +<pinref part="Q9" gate="1" pin="S"/> +<wire x1="378.46" y1="76.2" x2="378.46" y2="68.58" width="0.1524" layer="91"/> +<junction x="378.46" y="68.58"/> +<pinref part="Q10" gate="1" pin="D"/> +<wire x1="378.46" y1="66.04" x2="378.46" y2="68.58" width="0.1524" layer="91"/> </segment> </net> <net name="DRV-LO-V" class="0"> <segment> <pinref part="R29" gate="G$1" pin="1"/> -<wire x1="337.82" y1="68.58" x2="327.66" y2="68.58" width="0.1524" layer="91"/> -<label x="327.66" y="68.58" size="1.778" layer="95"/> +<wire x1="340.36" y1="58.42" x2="330.2" y2="58.42" width="0.1524" layer="91"/> +<label x="330.2" y="58.42" size="1.778" layer="95"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="GL_B"/> @@ -5229,8 +7159,8 @@ high speed (Philips)</description> <net name="DRV-HI-V" class="0"> <segment> <pinref part="R28" gate="G$1" pin="1"/> -<wire x1="337.82" y1="88.9" x2="327.66" y2="88.9" width="0.1524" layer="91"/> -<label x="327.66" y="88.9" size="1.778" layer="95"/> +<wire x1="340.36" y1="78.74" x2="330.2" y2="78.74" width="0.1524" layer="91"/> +<label x="330.2" y="78.74" size="1.778" layer="95"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="GH_B"/> @@ -5241,8 +7171,8 @@ high speed (Philips)</description> <net name="DRV-HI-W" class="0"> <segment> <pinref part="R33" gate="G$1" pin="1"/> -<wire x1="434.34" y1="88.9" x2="424.18" y2="88.9" width="0.1524" layer="91"/> -<label x="424.18" y="88.9" size="1.778" layer="95"/> +<wire x1="436.88" y1="78.74" x2="426.72" y2="78.74" width="0.1524" layer="91"/> +<label x="426.72" y="78.74" size="1.778" layer="95"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="GH_C"/> @@ -5266,22 +7196,31 @@ high speed (Philips)</description> <wire x1="134.62" y1="15.24" x2="134.62" y2="17.78" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="U$11" gate="G$1" pin="SH"/> -<wire x1="449.58" y1="78.74" x2="424.18" y2="78.74" width="0.1524" layer="91"/> -<label x="424.18" y="78.74" size="1.778" layer="95"/> -</segment> -<segment> -<pinref part="U$11" gate="G$1" pin="VSW"/> +<wire x1="452.12" y1="68.58" x2="426.72" y2="68.58" width="0.1524" layer="91"/> +<label x="426.72" y="68.58" size="1.778" layer="95"/> +<wire x1="457.2" y1="66.04" x2="457.2" y2="68.58" width="0.1524" layer="91"/> +<wire x1="457.2" y1="68.58" x2="457.2" y2="76.2" width="0.1524" layer="91"/> +<wire x1="452.12" y1="68.58" x2="457.2" y2="68.58" width="0.1524" layer="91"/> +<junction x="457.2" y="68.58"/> <pinref part="J11" gate="G$1" pin="PWRPAD"/> -<wire x1="485.14" y1="78.74" x2="505.46" y2="78.74" width="0.1524" layer="91"/> -<label x="487.68" y="78.74" size="1.778" layer="95"/> +<wire x1="472.44" y1="68.58" x2="474.98" y2="68.58" width="0.1524" layer="91"/> +<label x="474.98" y="68.58" size="1.778" layer="95"/> +<wire x1="474.98" y1="68.58" x2="492.76" y2="68.58" width="0.1524" layer="91"/> +<wire x1="457.2" y1="68.58" x2="472.44" y2="68.58" width="0.1524" layer="91"/> +<pinref part="Q5" gate="1" pin="D"/> +<pinref part="Q6" gate="1" pin="S"/> +<pinref part="Q12" gate="1" pin="D"/> +<wire x1="474.98" y1="66.04" x2="474.98" y2="68.58" width="0.1524" layer="91"/> +<junction x="474.98" y="68.58"/> +<pinref part="Q11" gate="1" pin="S"/> +<wire x1="474.98" y1="76.2" x2="474.98" y2="68.58" width="0.1524" layer="91"/> </segment> </net> <net name="DRV-LO-W" class="0"> <segment> <pinref part="R34" gate="G$1" pin="1"/> -<wire x1="434.34" y1="68.58" x2="424.18" y2="68.58" width="0.1524" layer="91"/> -<label x="424.18" y="68.58" size="1.778" layer="95"/> +<wire x1="436.88" y1="58.42" x2="426.72" y2="58.42" width="0.1524" layer="91"/> +<label x="426.72" y="58.42" size="1.778" layer="95"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="GL_C"/> @@ -5291,42 +7230,14 @@ high speed (Philips)</description> </net> <net name="SL-W" class="0"> <segment> -<wire x1="469.9" y1="45.72" x2="469.9" y2="50.8" width="0.1524" layer="91"/> -<wire x1="469.9" y1="50.8" x2="439.42" y2="50.8" width="0.1524" layer="91"/> -<label x="439.42" y="50.8" size="1.778" layer="95"/> -<pinref part="R5" gate="G$1" pin="B"/> -<pinref part="U$11" gate="G$1" pin="GND"/> -<wire x1="469.9" y1="50.8" x2="469.9" y2="53.34" width="0.1524" layer="91"/> -<junction x="469.9" y="50.8"/> -</segment> -<segment> <pinref part="U2" gate="G$1" pin="SL_C"/> <wire x1="114.3" y1="12.7" x2="124.46" y2="12.7" width="0.1524" layer="91"/> <label x="116.84" y="12.7" size="1.778" layer="95"/> </segment> -</net> -<net name="SHNT-W-HI" class="0"> -<segment> -<wire x1="467.36" y1="45.72" x2="439.42" y2="45.72" width="0.1524" layer="91"/> -<label x="439.42" y="45.72" size="1.778" layer="95"/> -<pinref part="R5" gate="G$1" pin="SB"/> -</segment> -<segment> -<pinref part="R20" gate="G$1" pin="1"/> -<wire x1="152.4" y1="-5.08" x2="160.02" y2="-5.08" width="0.1524" layer="91"/> -<label x="152.4" y="-5.08" size="1.778" layer="95"/> -</segment> -</net> -<net name="SHNT-W-LO" class="0"> -<segment> -<wire x1="467.36" y1="33.02" x2="439.42" y2="33.02" width="0.1524" layer="91"/> -<label x="439.42" y="33.02" size="1.778" layer="95"/> -<pinref part="R5" gate="G$1" pin="SA"/> -</segment> <segment> -<pinref part="R21" gate="G$1" pin="1"/> -<wire x1="152.4" y1="-12.7" x2="160.02" y2="-12.7" width="0.1524" layer="91"/> -<label x="152.4" y="-12.7" size="1.778" layer="95"/> +<pinref part="J21" gate="1" pin="P$1"/> +<wire x1="431.8" y1="48.26" x2="414.02" y2="48.26" width="0.1524" layer="91"/> +<label x="414.02" y="48.26" size="1.778" layer="95"/> </segment> </net> <net name="N$7" class="0"> @@ -5415,26 +7326,24 @@ high speed (Philips)</description> <net name="N$18" class="0"> <segment> <pinref part="U2" gate="G$1" pin="GVDD"/> -<pinref part="C16" gate="G$1" pin="2"/> <wire x1="78.74" y1="38.1" x2="45.72" y2="38.1" width="0.1524" layer="91"/> <pinref part="C13" gate="G$1" pin="2"/> <wire x1="45.72" y1="38.1" x2="35.56" y2="38.1" width="0.1524" layer="91"/> +<pinref part="C16" gate="G$1" pin="2"/> <junction x="45.72" y="38.1"/> </segment> </net> <net name="N$20" class="0"> <segment> -<pinref part="C17" gate="G$1" pin="2"/> <pinref part="C14" gate="G$1" pin="2"/> -<wire x1="48.26" y1="12.7" x2="38.1" y2="12.7" width="0.1524" layer="91"/> +<wire x1="48.26" y1="12.7" x2="45.72" y2="12.7" width="0.1524" layer="91"/> <pinref part="U2" gate="G$1" pin="DVDD"/> <wire x1="78.74" y1="12.7" x2="48.26" y2="12.7" width="0.1524" layer="91"/> -<junction x="48.26" y="12.7"/> <pinref part="U2" gate="G$1" pin="OC_ADJ"/> <wire x1="78.74" y1="43.18" x2="20.32" y2="43.18" width="0.1524" layer="91"/> <wire x1="20.32" y1="43.18" x2="20.32" y2="12.7" width="0.1524" layer="91"/> -<wire x1="20.32" y1="12.7" x2="38.1" y2="12.7" width="0.1524" layer="91"/> -<junction x="38.1" y="12.7"/> +<wire x1="20.32" y1="12.7" x2="45.72" y2="12.7" width="0.1524" layer="91"/> +<junction x="45.72" y="12.7"/> </segment> </net> <net name="N$11" class="0"> @@ -5475,16 +7384,6 @@ high speed (Philips)</description> <label x="-48.26" y="48.26" size="1.778" layer="95"/> </segment> </net> -<net name="N$34" class="0"> -<segment> -<pinref part="L1" gate="G$1" pin="1"/> -<pinref part="C12" gate="G$1" pin="1"/> -<wire x1="-10.16" y1="116.84" x2="-15.24" y2="116.84" width="0.1524" layer="91"/> -<wire x1="-15.24" y1="116.84" x2="-50.8" y2="116.84" width="0.1524" layer="91"/> -<junction x="-15.24" y="116.84"/> -<pinref part="U1" gate="G$1" pin="PA0/AREF"/> -</segment> -</net> <net name="V-W" class="0"> <segment> <pinref part="R37" gate="G$1" pin="2"/> @@ -5530,13 +7429,6 @@ high speed (Philips)</description> <label x="-48.26" y="55.88" size="1.778" layer="95"/> </segment> </net> -<net name="N$26" class="0"> -<segment> -<pinref part="S3" gate="G$1" pin="3"/> -<wire x1="-71.12" y1="137.16" x2="-88.9" y2="137.16" width="0.1524" layer="91"/> -<pinref part="R3" gate="G$1" pin="1"/> -</segment> -</net> <net name="N$35" class="0"> <segment> <wire x1="-58.42" y1="157.48" x2="-66.04" y2="157.48" width="0.1524" layer="91"/> @@ -5628,54 +7520,61 @@ high speed (Philips)</description> <net name="N$2" class="0"> <segment> <pinref part="R25" gate="G$1" pin="2"/> -<pinref part="U$9" gate="G$1" pin="GL"/> -<wire x1="241.3" y1="68.58" x2="246.38" y2="68.58" width="0.1524" layer="91"/> +<wire x1="256.54" y1="58.42" x2="261.62" y2="58.42" width="0.1524" layer="91"/> +<pinref part="Q2" gate="1" pin="G"/> +<pinref part="Q7" gate="1" pin="G"/> +<wire x1="261.62" y1="58.42" x2="274.32" y2="58.42" width="0.1524" layer="91"/> +<junction x="261.62" y="58.42"/> </segment> </net> <net name="N$3" class="0"> <segment> -<pinref part="U$9" gate="G$1" pin="GH"/> <pinref part="R24" gate="G$1" pin="2"/> -<wire x1="246.38" y1="88.9" x2="241.3" y2="88.9" width="0.1524" layer="91"/> +<wire x1="261.62" y1="78.74" x2="256.54" y2="78.74" width="0.1524" layer="91"/> +<pinref part="Q1" gate="1" pin="G"/> +<pinref part="Q8" gate="1" pin="G"/> +<wire x1="261.62" y1="78.74" x2="274.32" y2="78.74" width="0.1524" layer="91"/> +<junction x="261.62" y="78.74"/> </segment> </net> <net name="N$4" class="0"> <segment> <pinref part="R28" gate="G$1" pin="2"/> -<pinref part="U$10" gate="G$1" pin="GH"/> -<wire x1="347.98" y1="88.9" x2="353.06" y2="88.9" width="0.1524" layer="91"/> +<wire x1="350.52" y1="78.74" x2="355.6" y2="78.74" width="0.1524" layer="91"/> +<pinref part="Q4" gate="1" pin="G"/> +<pinref part="Q9" gate="1" pin="G"/> +<wire x1="355.6" y1="78.74" x2="373.38" y2="78.74" width="0.1524" layer="91"/> +<junction x="355.6" y="78.74"/> </segment> </net> <net name="N$24" class="0"> <segment> <pinref part="R29" gate="G$1" pin="2"/> -<pinref part="U$10" gate="G$1" pin="GL"/> -<wire x1="347.98" y1="68.58" x2="353.06" y2="68.58" width="0.1524" layer="91"/> +<wire x1="350.52" y1="58.42" x2="355.6" y2="58.42" width="0.1524" layer="91"/> +<pinref part="Q3" gate="1" pin="G"/> +<pinref part="Q10" gate="1" pin="G"/> +<wire x1="355.6" y1="58.42" x2="373.38" y2="58.42" width="0.1524" layer="91"/> +<junction x="355.6" y="58.42"/> </segment> </net> <net name="N$5" class="0"> <segment> <pinref part="R33" gate="G$1" pin="2"/> -<pinref part="U$11" gate="G$1" pin="GH"/> -<wire x1="444.5" y1="88.9" x2="449.58" y2="88.9" width="0.1524" layer="91"/> +<wire x1="447.04" y1="78.74" x2="452.12" y2="78.74" width="0.1524" layer="91"/> +<pinref part="Q6" gate="1" pin="G"/> +<pinref part="Q11" gate="1" pin="G"/> +<wire x1="452.12" y1="78.74" x2="469.9" y2="78.74" width="0.1524" layer="91"/> +<junction x="452.12" y="78.74"/> </segment> </net> <net name="N$6" class="0"> <segment> -<pinref part="U$11" gate="G$1" pin="GL"/> <pinref part="R34" gate="G$1" pin="2"/> -<wire x1="449.58" y1="68.58" x2="444.5" y2="68.58" width="0.1524" layer="91"/> -</segment> -</net> -<net name="THERMISTOR" class="0"> -<segment> -<pinref part="R13" gate="G$1" pin="2"/> -<pinref part="R14" gate="G$1" pin="1"/> -<wire x1="266.7" y1="-91.44" x2="266.7" y2="-88.9" width="0.1524" layer="91"/> -<wire x1="266.7" y1="-88.9" x2="266.7" y2="-86.36" width="0.1524" layer="91"/> -<wire x1="266.7" y1="-88.9" x2="236.22" y2="-88.9" width="0.1524" layer="91"/> -<junction x="266.7" y="-88.9"/> -<label x="236.22" y="-88.9" size="1.778" layer="95"/> +<wire x1="452.12" y1="58.42" x2="447.04" y2="58.42" width="0.1524" layer="91"/> +<pinref part="Q5" gate="1" pin="G"/> +<pinref part="Q12" gate="1" pin="G"/> +<wire x1="469.9" y1="58.42" x2="452.12" y2="58.42" width="0.1524" layer="91"/> +<junction x="452.12" y="58.42"/> </segment> </net> <net name="STLCLK" class="0"> @@ -5705,50 +7604,70 @@ high speed (Philips)</description> <net name="ENC_MISO" class="0"> <segment> <pinref part="J6" gate="A" pin="3"/> -<wire x1="91.44" y1="111.76" x2="78.74" y2="111.76" width="0.1524" layer="91"/> -<label x="78.74" y="111.76" size="1.778" layer="95"/> +<wire x1="88.9" y1="127" x2="76.2" y2="127" width="0.1524" layer="91"/> +<label x="76.2" y="127" size="1.778" layer="95"/> </segment> <segment> <pinref part="U1" gate="G$1" pin="PD6/RXD1/MISO/D-"/> <wire x1="-50.8" y1="33.02" x2="-33.02" y2="33.02" width="0.1524" layer="91"/> <label x="-48.26" y="33.02" size="1.778" layer="95"/> </segment> +<segment> +<pinref part="J19" gate="G$1" pin="1"/> +<wire x1="40.64" y1="127" x2="27.94" y2="127" width="0.1524" layer="91"/> +<label x="27.94" y="127" size="1.778" layer="95"/> +</segment> </net> <net name="ENC_SCK" class="0"> <segment> <pinref part="J6" gate="A" pin="4"/> -<wire x1="91.44" y1="109.22" x2="78.74" y2="109.22" width="0.1524" layer="91"/> -<label x="78.74" y="109.22" size="1.778" layer="95"/> +<wire x1="88.9" y1="124.46" x2="76.2" y2="124.46" width="0.1524" layer="91"/> +<label x="76.2" y="124.46" size="1.778" layer="95"/> </segment> <segment> <pinref part="U1" gate="G$1" pin="PD5/XCK/MOSI"/> <wire x1="-50.8" y1="35.56" x2="-33.02" y2="35.56" width="0.1524" layer="91"/> <label x="-48.26" y="35.56" size="1.778" layer="95"/> </segment> +<segment> +<pinref part="J19" gate="G$1" pin="2"/> +<wire x1="40.64" y1="124.46" x2="27.94" y2="124.46" width="0.1524" layer="91"/> +<label x="27.94" y="124.46" size="1.778" layer="95"/> +</segment> </net> <net name="ENC_CSN" class="0"> <segment> <pinref part="J6" gate="A" pin="5"/> -<wire x1="91.44" y1="106.68" x2="78.74" y2="106.68" width="0.1524" layer="91"/> -<label x="78.74" y="106.68" size="1.778" layer="95"/> +<wire x1="88.9" y1="121.92" x2="76.2" y2="121.92" width="0.1524" layer="91"/> +<label x="76.2" y="121.92" size="1.778" layer="95"/> </segment> <segment> <pinref part="U1" gate="G$1" pin="PD4/SS"/> <wire x1="-50.8" y1="38.1" x2="-33.02" y2="38.1" width="0.1524" layer="91"/> <label x="-48.26" y="38.1" size="1.778" layer="95"/> </segment> +<segment> +<pinref part="J19" gate="G$1" pin="3"/> +<wire x1="40.64" y1="121.92" x2="27.94" y2="121.92" width="0.1524" layer="91"/> +<label x="27.94" y="121.92" size="1.778" layer="95"/> +</segment> </net> <net name="ENC_MOSI" class="0"> <segment> <pinref part="J6" gate="A" pin="6"/> -<wire x1="91.44" y1="104.14" x2="78.74" y2="104.14" width="0.1524" layer="91"/> -<label x="78.74" y="104.14" size="1.778" layer="95"/> +<wire x1="88.9" y1="119.38" x2="76.2" y2="119.38" width="0.1524" layer="91"/> +<label x="76.2" y="119.38" size="1.778" layer="95"/> </segment> <segment> <pinref part="U1" gate="G$1" pin="PD7/TXD1/SCK/D+"/> <wire x1="-50.8" y1="30.48" x2="-33.02" y2="30.48" width="0.1524" layer="91"/> <label x="-48.26" y="30.48" size="1.778" layer="95"/> </segment> +<segment> +<pinref part="J19" gate="G$1" pin="4"/> +<wire x1="40.64" y1="119.38" x2="27.94" y2="119.38" width="0.1524" layer="91"/> +<label x="27.94" y="119.38" size="1.778" layer="95"/> +</segment> </net> <net name="N$12" class="0"> <segment> @@ -5764,49 +7683,23 @@ high speed (Philips)</description> <wire x1="-101.6" y1="43.18" x2="-114.3" y2="43.18" width="0.1524" layer="91"/> </segment> </net> -<net name="N$1" class="0"> -<segment> -<pinref part="R7" gate="G$1" pin="2"/> -<pinref part="J1" gate="G$1" pin="YLW-TX"/> -<wire x1="71.12" y1="139.7" x2="91.44" y2="139.7" width="0.1524" layer="91"/> -</segment> -</net> -<net name="N$22" class="0"> -<segment> -<pinref part="R9" gate="G$1" pin="2"/> -<pinref part="J1" gate="G$1" pin="GRN-RX"/> -<wire x1="83.82" y1="144.78" x2="91.44" y2="144.78" width="0.1524" layer="91"/> -</segment> -</net> <net name="ATK0-RXLED" class="0"> <segment> <pinref part="R9" gate="G$1" pin="1"/> -<wire x1="73.66" y1="144.78" x2="45.72" y2="144.78" width="0.1524" layer="91"/> -<label x="45.72" y="144.78" size="1.778" layer="95"/> +<wire x1="-53.34" y1="-111.76" x2="-86.36" y2="-111.76" width="0.1524" layer="91"/> +<label x="-86.36" y="-111.76" size="1.778" layer="95"/> </segment> <segment> -<pinref part="U1" gate="G$1" pin="PE4/SS"/> -<wire x1="-50.8" y1="15.24" x2="-33.02" y2="15.24" width="0.1524" layer="91"/> -<label x="-48.26" y="15.24" size="1.778" layer="95"/> +<pinref part="U1" gate="G$1" pin="PF0"/> +<wire x1="-50.8" y1="2.54" x2="-33.02" y2="2.54" width="0.1524" layer="91"/> +<label x="-48.26" y="2.54" size="1.778" layer="95"/> </segment> </net> <net name="ATK0-TXLED" class="0"> <segment> <pinref part="R7" gate="G$1" pin="1"/> -<wire x1="60.96" y1="139.7" x2="45.72" y2="139.7" width="0.1524" layer="91"/> -<label x="45.72" y="139.7" size="1.778" layer="95"/> -</segment> -<segment> -<pinref part="U1" gate="G$1" pin="PE5/XCK1/MOSI"/> -<wire x1="-50.8" y1="12.7" x2="-33.02" y2="12.7" width="0.1524" layer="91"/> -<label x="-48.26" y="12.7" size="1.778" layer="95"/> -</segment> -</net> -<net name="ATK0-CLKIN" class="0"> -<segment> -<pinref part="J1" gate="G$1" pin="CLKIN"/> -<wire x1="91.44" y1="175.26" x2="45.72" y2="175.26" width="0.1524" layer="91"/> -<label x="45.72" y="175.26" size="1.778" layer="95"/> +<wire x1="-53.34" y1="-121.92" x2="-86.36" y2="-121.92" width="0.1524" layer="91"/> +<label x="-86.36" y="-121.92" size="1.778" layer="95"/> </segment> <segment> <pinref part="U1" gate="G$1" pin="PF1/XCK0"/> @@ -5814,40 +7707,40 @@ high speed (Philips)</description> <label x="-48.26" y="0" size="1.778" layer="95"/> </segment> </net> -<net name="ATK0-TX" class="0"> +<net name="ATK0-CLKIN" class="0"> <segment> -<pinref part="J1" gate="G$1" pin="TX"/> -<wire x1="91.44" y1="165.1" x2="45.72" y2="165.1" width="0.1524" layer="91"/> -<label x="45.72" y="165.1" size="1.778" layer="95"/> +<pinref part="U3" gate="G$1" pin="1R"/> +<wire x1="-73.66" y1="-55.88" x2="-96.52" y2="-55.88" width="0.1524" layer="91"/> +<label x="-96.52" y="-55.88" size="1.778" layer="95"/> </segment> <segment> -<pinref part="U1" gate="G$1" pin="PE7/TXD1/SCK"/> -<wire x1="-50.8" y1="7.62" x2="-33.02" y2="7.62" width="0.1524" layer="91"/> -<label x="-48.26" y="7.62" size="1.778" layer="95"/> +<pinref part="U1" gate="G$1" pin="PE4/SS"/> +<wire x1="-50.8" y1="15.24" x2="-33.02" y2="15.24" width="0.1524" layer="91"/> +<label x="-48.26" y="15.24" size="1.778" layer="95"/> </segment> </net> -<net name="ATK0-RX" class="0"> +<net name="ATK0-TX" class="0"> <segment> -<pinref part="J1" gate="G$1" pin="RX"/> -<wire x1="91.44" y1="170.18" x2="45.72" y2="170.18" width="0.1524" layer="91"/> -<label x="45.72" y="170.18" size="1.778" layer="95"/> +<pinref part="U3" gate="G$1" pin="1D"/> +<wire x1="-73.66" y1="-71.12" x2="-96.52" y2="-71.12" width="0.1524" layer="91"/> +<label x="-96.52" y="-71.12" size="1.778" layer="95"/> </segment> <segment> -<pinref part="U1" gate="G$1" pin="PE6/RXD1/MISO"/> -<wire x1="-50.8" y1="10.16" x2="-33.02" y2="10.16" width="0.1524" layer="91"/> -<label x="-48.26" y="10.16" size="1.778" layer="95"/> +<pinref part="U1" gate="G$1" pin="PF3/TXD0"/> +<wire x1="-50.8" y1="-5.08" x2="-33.02" y2="-5.08" width="0.1524" layer="91"/> +<label x="-48.26" y="-5.08" size="1.778" layer="95"/> </segment> </net> <net name="ATK-CLKOUT" class="0"> <segment> -<pinref part="U1" gate="G$1" pin="PF0"/> -<wire x1="-50.8" y1="2.54" x2="-33.02" y2="2.54" width="0.1524" layer="91"/> -<label x="-48.26" y="2.54" size="1.778" layer="95"/> +<pinref part="U3" gate="G$1" pin="2D"/> +<wire x1="-73.66" y1="-99.06" x2="-96.52" y2="-99.06" width="0.1524" layer="91"/> +<label x="-96.52" y="-99.06" size="1.778" layer="95"/> </segment> <segment> -<pinref part="J1" gate="G$1" pin="CLKOUT"/> -<wire x1="91.44" y1="160.02" x2="45.72" y2="160.02" width="0.1524" layer="91"/> -<label x="45.72" y="160.02" size="1.778" layer="95"/> +<pinref part="U1" gate="G$1" pin="PF4"/> +<wire x1="-50.8" y1="-7.62" x2="-33.02" y2="-7.62" width="0.1524" layer="91"/> +<label x="-48.26" y="-7.62" size="1.778" layer="95"/> </segment> </net> <net name="N$27" class="0"> @@ -5871,21 +7764,21 @@ high speed (Philips)</description> </net> <net name="DRV_EN" class="0"> <segment> -<pinref part="S3" gate="G$1" pin="1"/> -<wire x1="-71.12" y1="132.08" x2="-86.36" y2="132.08" width="0.1524" layer="91"/> -<label x="-86.36" y="132.08" size="1.778" layer="95"/> -</segment> -<segment> <pinref part="U1" gate="G$1" pin="PD1/XCK0"/> <wire x1="-50.8" y1="45.72" x2="-33.02" y2="45.72" width="0.1524" layer="91"/> <label x="-48.26" y="45.72" size="1.778" layer="95"/> </segment> +<segment> +<pinref part="S3" gate="G$1" pin="3"/> +<wire x1="-71.12" y1="137.16" x2="-86.36" y2="137.16" width="0.1524" layer="91"/> +</segment> </net> <net name="DRV_EN_DRV" class="0"> <segment> <pinref part="S3" gate="G$1" pin="2"/> -<wire x1="-60.96" y1="134.62" x2="-50.8" y2="134.62" width="0.1524" layer="91"/> -<label x="-58.42" y="134.62" size="1.778" layer="95"/> +<wire x1="-60.96" y1="134.62" x2="-33.02" y2="134.62" width="0.1524" layer="91"/> +<label x="-50.8" y="134.62" size="1.778" layer="95"/> +<pinref part="R3" gate="G$1" pin="2"/> </segment> <segment> <pinref part="U2" gate="G$1" pin="EN_GATE"/> @@ -5979,6 +7872,227 @@ high speed (Philips)</description> <wire x1="78.74" y1="15.24" x2="60.96" y2="15.24" width="0.1524" layer="91"/> <label x="60.96" y="15.24" size="1.778" layer="95"/> </segment> +<segment> +<pinref part="J3" gate="G$1" pin="1"/> +<wire x1="40.64" y1="91.44" x2="27.94" y2="91.44" width="0.1524" layer="91"/> +<label x="27.94" y="91.44" size="1.778" layer="95"/> +</segment> +</net> +<net name="N$1" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="1A"/> +<pinref part="R1" gate="G$1" pin="2"/> +<wire x1="-38.1" y1="-50.8" x2="-35.56" y2="-50.8" width="0.1524" layer="91"/> +<pinref part="J1" gate="G$1" pin="CLKRX-A"/> +<wire x1="-35.56" y1="-50.8" x2="-25.4" y2="-50.8" width="0.1524" layer="91"/> +<junction x="-35.56" y="-50.8"/> +</segment> +</net> +<net name="N$22" class="0"> +<segment> +<pinref part="J1" gate="G$1" pin="CLKRX-B"/> +<pinref part="R1" gate="G$1" pin="1"/> +<wire x1="-25.4" y1="-60.96" x2="-35.56" y2="-60.96" width="0.1524" layer="91"/> +<pinref part="U3" gate="G$1" pin="1B"/> +<wire x1="-35.56" y1="-60.96" x2="-38.1" y2="-60.96" width="0.1524" layer="91"/> +<junction x="-35.56" y="-60.96"/> +</segment> +</net> +<net name="N$29" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="1Y"/> +<pinref part="J1" gate="G$1" pin="TX-Y"/> +<wire x1="-38.1" y1="-66.04" x2="-25.4" y2="-66.04" width="0.1524" layer="91"/> +</segment> +</net> +<net name="N$30" class="0"> +<segment> +<pinref part="J1" gate="G$1" pin="TX-Z"/> +<pinref part="U3" gate="G$1" pin="1Z"/> +<wire x1="-25.4" y1="-71.12" x2="-38.1" y2="-71.12" width="0.1524" layer="91"/> +</segment> +</net> +<net name="N$31" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="2B"/> +<pinref part="R13" gate="G$1" pin="2"/> +<wire x1="-38.1" y1="-78.74" x2="-35.56" y2="-78.74" width="0.1524" layer="91"/> +<pinref part="J1" gate="G$1" pin="RX-B"/> +<wire x1="-35.56" y1="-78.74" x2="-25.4" y2="-78.74" width="0.1524" layer="91"/> +<junction x="-35.56" y="-78.74"/> +</segment> +</net> +<net name="N$32" class="0"> +<segment> +<pinref part="J1" gate="G$1" pin="RX-A"/> +<pinref part="R13" gate="G$1" pin="1"/> +<wire x1="-25.4" y1="-88.9" x2="-35.56" y2="-88.9" width="0.1524" layer="91"/> +<pinref part="U3" gate="G$1" pin="2A"/> +<wire x1="-35.56" y1="-88.9" x2="-38.1" y2="-88.9" width="0.1524" layer="91"/> +<junction x="-35.56" y="-88.9"/> +</segment> +</net> +<net name="N$33" class="0"> +<segment> +<pinref part="U3" gate="G$1" pin="2Z"/> +<pinref part="J1" gate="G$1" pin="CLKTX-Z"/> +<wire x1="-38.1" y1="-93.98" x2="-25.4" y2="-93.98" width="0.1524" layer="91"/> +</segment> +</net> +<net name="N$34" class="0"> +<segment> +<pinref part="J1" gate="G$1" pin="CLKRX-Y"/> +<pinref part="U3" gate="G$1" pin="2Y"/> +<wire x1="-25.4" y1="-99.06" x2="-38.1" y2="-99.06" width="0.1524" layer="91"/> +</segment> +</net> +<net name="VSW" class="0"> +<segment> +<pinref part="U4" gate="G$1" pin="VSW"/> +<pinref part="C22" gate="G$1" pin="2"/> +<wire x1="-38.1" y1="-160.02" x2="-35.56" y2="-160.02" width="0.1524" layer="91"/> +<pinref part="L1" gate="G$1" pin="2"/> +<wire x1="-35.56" y1="-160.02" x2="-25.4" y2="-160.02" width="0.1524" layer="91"/> +<junction x="-35.56" y="-160.02"/> +<label x="-38.1" y="-162.56" size="1.778" layer="95"/> +</segment> +</net> +<net name="BUCKBST" class="0"> +<segment> +<pinref part="U4" gate="G$1" pin="BST"/> +<pinref part="C22" gate="G$1" pin="1"/> +<wire x1="-38.1" y1="-152.4" x2="-35.56" y2="-152.4" width="0.1524" layer="91"/> +<label x="-38.1" y="-152.4" size="1.778" layer="95"/> +</segment> +</net> +<net name="+5V" class="0"> +<segment> +<pinref part="L1" gate="G$1" pin="1"/> +<pinref part="C30" gate="G$1" pin="1"/> +<wire x1="-10.16" y1="-160.02" x2="-7.62" y2="-160.02" width="0.1524" layer="91"/> +<pinref part="C34" gate="G$1" pin="1"/> +<wire x1="-7.62" y1="-160.02" x2="-2.54" y2="-160.02" width="0.1524" layer="91"/> +<wire x1="-2.54" y1="-160.02" x2="7.62" y2="-160.02" width="0.1524" layer="91"/> +<junction x="-2.54" y="-160.02"/> +<pinref part="C35" gate="G$1" pin="1"/> +<wire x1="7.62" y1="-160.02" x2="17.78" y2="-160.02" width="0.1524" layer="91"/> +<junction x="7.62" y="-160.02"/> +<pinref part="C36" gate="G$1" pin="1"/> +<wire x1="17.78" y1="-160.02" x2="27.94" y2="-160.02" width="0.1524" layer="91"/> +<junction x="17.78" y="-160.02"/> +<pinref part="P+10" gate="1" pin="+5V"/> +<wire x1="27.94" y1="-160.02" x2="38.1" y2="-160.02" width="0.1524" layer="91"/> +<junction x="27.94" y="-160.02"/> +<wire x1="38.1" y1="-160.02" x2="88.9" y2="-160.02" width="0.1524" layer="91"/> +<wire x1="-7.62" y1="-160.02" x2="-7.62" y2="-167.64" width="0.1524" layer="91"/> +<junction x="-7.62" y="-160.02"/> +<pinref part="U4" gate="G$1" pin="FB"/> +<wire x1="-7.62" y1="-167.64" x2="-38.1" y2="-167.64" width="0.1524" layer="91"/> +<pinref part="U5" gate="G$1" pin="VIN"/> +<wire x1="40.64" y1="-175.26" x2="38.1" y2="-175.26" width="0.1524" layer="91"/> +<wire x1="38.1" y1="-175.26" x2="38.1" y2="-160.02" width="0.1524" layer="91"/> +<junction x="38.1" y="-160.02"/> +<pinref part="U5" gate="G$1" pin="EN"/> +<wire x1="40.64" y1="-180.34" x2="38.1" y2="-180.34" width="0.1524" layer="91"/> +<wire x1="38.1" y1="-180.34" x2="38.1" y2="-175.26" width="0.1524" layer="91"/> +<junction x="38.1" y="-175.26"/> +</segment> +<segment> +<pinref part="P+4" gate="1" pin="+5V"/> +<pinref part="C27" gate="G$1" pin="1"/> +<wire x1="-99.06" y1="-40.64" x2="-83.82" y2="-40.64" width="0.1524" layer="91"/> +<pinref part="U3" gate="G$1" pin="VCC"/> +<wire x1="-83.82" y1="-40.64" x2="-73.66" y2="-40.64" width="0.1524" layer="91"/> +<junction x="-83.82" y="-40.64"/> +</segment> +</net> +<net name="N$39" class="0"> +<segment> +<pinref part="R9" gate="G$1" pin="2"/> +<pinref part="J1" gate="G$1" pin="LED-GRN-CATHODE"/> +<wire x1="-43.18" y1="-111.76" x2="-25.4" y2="-111.76" width="0.1524" layer="91"/> +</segment> +</net> +<net name="N$41" class="0"> +<segment> +<pinref part="J1" gate="G$1" pin="LED-YLW-CATHODE"/> +<pinref part="R7" gate="G$1" pin="2"/> +<wire x1="-25.4" y1="-121.92" x2="-43.18" y2="-121.92" width="0.1524" layer="91"/> +</segment> +</net> +<net name="ATK0-RX" class="0"> +<segment> +<pinref part="U1" gate="G$1" pin="PF2/RXD0"/> +<wire x1="-50.8" y1="-2.54" x2="-33.02" y2="-2.54" width="0.1524" layer="91"/> +<label x="-48.26" y="-2.54" size="1.778" layer="95"/> +</segment> +<segment> +<pinref part="U3" gate="G$1" pin="2R"/> +<wire x1="-73.66" y1="-83.82" x2="-96.52" y2="-83.82" width="0.1524" layer="91"/> +<label x="-96.52" y="-83.82" size="1.778" layer="95"/> +</segment> +</net> +<net name="RTD" class="0"> +<segment> +<pinref part="U9" gate="G$1" pin="TERM2"/> +<wire x1="203.2" y1="63.5" x2="198.12" y2="63.5" width="0.1524" layer="91"/> +<pinref part="R14" gate="G$1" pin="2"/> +<wire x1="198.12" y1="63.5" x2="190.5" y2="63.5" width="0.1524" layer="91"/> +<wire x1="190.5" y1="63.5" x2="182.88" y2="63.5" width="0.1524" layer="91"/> +<wire x1="198.12" y1="60.96" x2="198.12" y2="63.5" width="0.1524" layer="91"/> +<junction x="198.12" y="63.5"/> +<label x="182.88" y="63.5" size="1.778" layer="95"/> +<pinref part="J20" gate="G$1" pin="1"/> +<junction x="190.5" y="63.5"/> +</segment> +<segment> +<pinref part="U1" gate="G$1" pin="PB1"/> +<wire x1="-50.8" y1="91.44" x2="-33.02" y2="91.44" width="0.1524" layer="91"/> +<label x="-48.26" y="91.44" size="1.778" layer="95"/> +</segment> +</net> +<net name="SHNT-U-HI" class="0"> +<segment> +<pinref part="R18" gate="G$1" pin="1"/> +<wire x1="152.4" y1="10.16" x2="160.02" y2="10.16" width="0.1524" layer="91"/> +<label x="152.4" y="10.16" size="1.778" layer="95"/> +</segment> +<segment> +<pinref part="R4" gate="G$1" pin="SA"/> +<wire x1="269.24" y1="43.18" x2="287.02" y2="43.18" width="0.1524" layer="91"/> +<label x="271.78" y="43.18" size="1.778" layer="95"/> +</segment> +</net> +<net name="SHNT-U-LO" class="0"> +<segment> +<pinref part="R19" gate="G$1" pin="1"/> +<wire x1="152.4" y1="2.54" x2="160.02" y2="2.54" width="0.1524" layer="91"/> +<label x="152.4" y="2.54" size="1.778" layer="95"/> +</segment> +<segment> +<pinref part="R4" gate="G$1" pin="SB"/> +<wire x1="269.24" y1="30.48" x2="287.02" y2="30.48" width="0.1524" layer="91"/> +<label x="271.78" y="30.48" size="1.778" layer="95"/> +</segment> +</net> +<net name="SL-U" class="0"> +<segment> +<pinref part="Q2" gate="1" pin="S"/> +<wire x1="266.7" y1="50.8" x2="266.7" y2="55.88" width="0.1524" layer="91"/> +<wire x1="266.7" y1="50.8" x2="236.22" y2="50.8" width="0.1524" layer="91"/> +<label x="236.22" y="50.8" size="1.778" layer="95"/> +<pinref part="R4" gate="G$1" pin="A"/> +<wire x1="266.7" y1="43.18" x2="266.7" y2="50.8" width="0.1524" layer="91"/> +<junction x="266.7" y="50.8"/> +<pinref part="Q7" gate="1" pin="S"/> +<wire x1="279.4" y1="55.88" x2="266.7" y2="55.88" width="0.1524" layer="91"/> +<junction x="266.7" y="55.88"/> +</segment> +<segment> +<pinref part="U2" gate="G$1" pin="SL_A"/> +<wire x1="114.3" y1="38.1" x2="124.46" y2="38.1" width="0.1524" layer="91"/> +<label x="116.84" y="38.1" size="1.778" layer="95"/> +</segment> </net> </nets> </sheet> diff --git a/circuit/atkbldcdriver/atkbldcdriver_2018-08-26.zip b/circuit/atkbldcdriver/atkbldcdriver_2018-08-26.zip new file mode 100644 index 0000000000000000000000000000000000000000..aa96f3c223d24eb6637714193090386ac9e1070d Binary files /dev/null and b/circuit/atkbldcdriver/atkbldcdriver_2018-08-26.zip differ diff --git a/circuit/atkbldcdriver/eagle.epf b/circuit/atkbldcdriver/eagle.epf index bbc506275c2251b4a18ab29818c3b2c4c1738809..647ff67c8fb25226467e595df8bde738a817f631 100644 --- a/circuit/atkbldcdriver/eagle.epf +++ b/circuit/atkbldcdriver/eagle.epf @@ -8,6 +8,8 @@ Desktop="Desktop" AutoSaveProject=1 UsedLibraryUrn="urn:adsk.eagle:library:217" UsedLibraryUrn="urn:adsk.eagle:library:325" +UsedLibraryUrn="urn:adsk.eagle:library:371" +UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/comm.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/connector.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/fab.lbr" UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/lights.lbr" @@ -23,17 +25,17 @@ UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries_jake/eagle/marekr/borkedlab UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries_jake/eagle/sparkfun/SparkFun-DiscreteSemi.lbr" [Win_1] -Type="Schematic Editor" -Number=3 -File="atkbldcdriver.sch" -View="-191.424 46.8832 11.2038 138.852" -WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.2032 0.254 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524" +Type="Library Editor" +Number=2 +File="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/power.lbr" +View="-4.8143 -9.77493 4.96211 9.82573" +WireWidths=" 0.0762 0.1016 0.15 0.2 0.2032 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524 0.254 0.127" PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6" ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0" ViaDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35" HoleDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35" -TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778" +TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778 1.27" PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27" PolygonIsolates=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" MiterRadiuss=" 0.254 0.3175 0.635 1.27 2.54 1 2 2.5 5 7.5 10 0" @@ -43,9 +45,9 @@ DimensionExtLengths=" 1.27 2.54 1 2 3 0" DimensionExtOffsets=" 1.27 2.54 1 2 3 0" SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635" WireBend=0 -WireBendSet=31 +WireBendSet=0 WireCap=1 -MiterStyle=0 +MiterStyle=1 PadShape=0 ViaShape=1 PolygonPour=0 @@ -64,20 +66,19 @@ SwapLevel=0 ArcDirection=0 AddLevel=2 PadsSameType=0 -Layer=91 -Views=" 1: -191.424 46.8832 11.2038 138.852" -Sheet="1" +Layer=21 +Package="HTSSOP-56" [Win_2] Type="Board Editor" Number=1 File="atkbldcdriver.brd" -View="45.5333 30.9446 77.9146 57.9135" -WireWidths=" 0.0762 0.127 0.15 0.508 0.6096 0.8128 2.54 1.016 1.27 0.3048 0.254 0.2 0.4064 0.1016 0.2032 0.1524" +View="-15.1007 14.1863 109.925 37.5249" +WireWidths=" 0.127 0.15 0.6096 2.54 1.27 0.3048 0.254 0.2 0.1016 1.016 0.508 0.4064 0.2032 0.8128 0.0762 0.1524" PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" PadDrills=" 0.2 0.25 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6 0.3" ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0" -ViaDrills=" 0.2 0.4 0.45 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.5 0.25 0.35 0.3" +ViaDrills=" 0.2 0.4 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.5 0.25 0.35 0.45 0.3" HoleDrills=" 0.2 0.25 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35 0.3" TextSizes=" 0.254 0.3048 0.4064 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778 0.6096" PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27" @@ -113,6 +114,52 @@ PadsSameType=0 Layer=1 [Win_3] +Type="Schematic Editor" +Number=3 +File="atkbldcdriver.sch" +View="-343.782 -295.52 910.832 273.925" +WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.2032 0.254 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524" +PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" +PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6" +ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0" +ViaDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35" +HoleDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35" +TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778" +PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27" +PolygonIsolates=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0" +MiterRadiuss=" 0.254 0.3175 0.635 1.27 2.54 1 2 2.5 5 7.5 10 0" +DimensionWidths=" 0 0.127 0.254 0.1 0.26 0.13" +DimensionExtWidths=" 0.127 0.254 0.1 0.13 0.26 0" +DimensionExtLengths=" 1.27 2.54 1 2 3 0" +DimensionExtOffsets=" 1.27 2.54 1 2 3 0" +SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635" +WireBend=0 +WireBendSet=31 +WireCap=1 +MiterStyle=0 +PadShape=0 +ViaShape=1 +PolygonPour=0 +PolygonRank=0 +PolygonThermals=1 +PolygonOrphans=0 +TextRatio=8 +DimensionUnit=1 +DimensionPrecision=2 +DimensionShowUnit=0 +PinDirection=3 +PinFunction=0 +PinLength=2 +PinVisible=3 +SwapLevel=0 +ArcDirection=0 +AddLevel=2 +PadsSameType=0 +Layer=97 +Views=" 1: -343.782 -295.52 910.832 273.925" +Sheet="1" + +[Win_4] Type="Control Panel" Number=0 @@ -121,3 +168,4 @@ Screen="3840 1080" Window="Win_1" Window="Win_2" Window="Win_3" +Window="Win_4" diff --git a/datasheet/TPH2R608NH_datasheet_en_20150123.pdf b/datasheet/TPH2R608NH_datasheet_en_20150123.pdf new file mode 100644 index 0000000000000000000000000000000000000000..bee7602396eb977fb6384c4c7277e5568dbe44b7 Binary files /dev/null and b/datasheet/TPH2R608NH_datasheet_en_20150123.pdf differ diff --git a/datasheet/TPW4R008NH_datasheet_en_20170316.pdf b/datasheet/TPW4R008NH_datasheet_en_20170316.pdf new file mode 100644 index 0000000000000000000000000000000000000000..b3773e1dd92e9b995347b1ba4f91394a659d6a37 Binary files /dev/null and b/datasheet/TPW4R008NH_datasheet_en_20170316.pdf differ diff --git a/education/README.md b/education/README.md index 79a635518c75ea4a5c2873e18e961ef4cc59e8d6..dbf3a2c5f7f89b8e311932c2ce39d5bfa1fc074d 100644 --- a/education/README.md +++ b/education/README.md @@ -108,6 +108,13 @@ And the board, In each of these boards, we find a microcontroller, a gate driver, three half-bridges (6 MOSFETS), and current and voltage sensing circuitry. And a few BFCs never hurt. +#### Traps! + + - gate drivers + - inductance, pwm, body diodes / freewheeling + - current measurement + - pwm frequency + #### Typically Available: For motors, I am deeply in love with [Hobbyking](https://hobbyking.com/en_us/power-systems-1/electric-motors/size.html). @@ -128,7 +135,7 @@ To control these, look [here](https://hobbyking.com/en_us/power-systems-1/speed- The design of BLDCs is not changing radically - it's a good idea, and it works. -**There is one exception to this** - [Thingap Motors](http://www.thingap.com/) use an ironless winding [(patent here)](https://www.google.com/patents/US20130300241) and have relatively high torque densities. The [performance is impressive](http://www.thingap.com/standard-products/) but they cost ~1k at the low end. +**There is one exception to this** - [Thingap Motors](http://www.thingap.com/) use an ironless winding [(patent here)](https://www.google.com/patents/US20130300241) and have relatively high torque densities. The [performance is impressive](http://www.thingap.com/standard-products/) but they cost ~ 1k at the low end. What is interesting is where BLDCs are being used, controlled, and how they are being designed (shape, new densities). Take a look at [The Biomimetics Lab at MIT's](http://biomimetics.mit.edu/research/optimal-actuator-design) discussion on optimizing gap radius, etc. diff --git a/embedded/README.md b/embedded/README.md index 6b77b7762745bac473d5b59a6aee447ef104fd5d..2c6d6cd619a13eb0e643bbf8ed2ba90f566d322b 100644 --- a/embedded/README.md +++ b/embedded/README.md @@ -34,4 +34,8 @@ I know I can do this if I can manage to read my encoder successfully. I could al So, we use a logic analyzer to try reading this AMS5047 -Got this running, feels pretty mediocre. I need to understand commutation a bit better, and do this with a fan setup etc. I perhaps just have not counted my poles properly, but I wamt to do this with an oscilloscope, and understand how we might search for those offsets etc. \ No newline at end of file +Got this running, feels pretty mediocre. I need to understand commutation a bit better, and do this with a fan setup etc. I perhaps just have not counted my poles properly, but I want to do this with an oscilloscope, and understand how we might search for those offsets etc. + +# Notes + + - read shane colton's pdf on sensorless field oriented control, and his park-transform free FOC solution: sounds cool. finish phase search algorithm. \ No newline at end of file diff --git a/embedded/atkbldcdriver/atkbldcdriver/main.c b/embedded/atkbldcdriver/atkbldcdriver/main.c index 7612e062aafc4d301d26442a482c4e58adc9aeca..55127eac7f0ad4cf240187913bc2834962e3f8e9 100644 --- a/embedded/atkbldcdriver/atkbldcdriver/main.c +++ b/embedded/atkbldcdriver/atkbldcdriver/main.c @@ -110,6 +110,23 @@ void pwm_by_sin_duty(uint16_t phase, float duty){ pwm_periods(peru, perv, perw); } +uint16_t readings[20]; +uint8_t readIndex = 0; + +void putReading(uint16_t reading){ + readings[readIndex] = reading; + readIndex ++; +} + +void getReadAverage(uint16_t &avg){ + uint8_t numReads = readIndex; // sloppy, but makes this interrupt safe + uint32_t readSum = 0; + for(uint8_t i = 0; i < numReads; i ++){ + readSum += readings[i]; + } + *avg = readSum / numReads; +} + void pwm_init(void){ // setup awex etc @@ -183,10 +200,8 @@ void tickers_init(void){ // set cca interrupt on TCD0.INTCTRLA = TC_OVFINTLVL_HI_gc; - /* - // and a reasonable speed for acceleration ticking - - uint16_t perAccelRate = 800; + // this ticker for search + uint16_t perAccelRate = 2048; uint8_t perAl = (uint8_t) perAccelRate; uint8_t perAh = (uint8_t) (perAccelRate >> 8); @@ -196,7 +211,6 @@ void tickers_init(void){ TCD1.PERBUFH = perAh; TCD1.INTCTRLA = TC_OVFINTLVL_HI_gc; - */ } int main(void) @@ -260,7 +274,18 @@ ISR(TCD0_OVF_vect){ phase_target = (enc_resolution + enc_reading + enc_offset + pi_enc) % twoPi_enc; // we need to compute the respective pwm positions given the phase target - pwm_by_sin_duty(phase_target, 0.04); + pwm_by_sin_duty(phase_target, 0.05); +} + +static uint16_t lastRead = 0; +static uint16_t thisRead; + +ISR(TCD1_OVF_vect){ + // search timer + // get new pos: whoop, average speeds, derive from sequence! + getReadAverage(&thisRead); + + } ISR(USARTE1_RXC_vect){ diff --git a/images/routed-gnd.png b/images/routed-gnd.png new file mode 100644 index 0000000000000000000000000000000000000000..335e1624ca36df52b0364f8ee5a95270b466b14b Binary files /dev/null and b/images/routed-gnd.png differ diff --git a/images/routed.png b/images/routed.png index 8371a60ee95447827175fa01ac2f8d3995f35389..ae773ec56d949c626b676507d437fa8020c8d13c 100644 Binary files a/images/routed.png and b/images/routed.png differ diff --git a/images/schematic.png b/images/schematic.png index 43e971db03a5dca1388188ab680f01b4044b28ac..a3e17cef8bdb60507e024da8b2e688a91a3e9e9d 100644 Binary files a/images/schematic.png and b/images/schematic.png differ diff --git a/papers/MSCR_Rev1.pdf b/papers/MSCR_Rev1.pdf new file mode 100644 index 0000000000000000000000000000000000000000..b6b66178d70005466170e76cd38e00f356586d84 Binary files /dev/null and b/papers/MSCR_Rev1.pdf differ diff --git a/papers/sensorless_gen1_Rev1.pdf b/papers/sensorless_gen1_Rev1.pdf new file mode 100644 index 0000000000000000000000000000000000000000..19689d243329ca8f7098584f6f58954cd34ed12a Binary files /dev/null and b/papers/sensorless_gen1_Rev1.pdf differ