diff --git a/circuit/README.md b/circuit/README.md
index 680ae647f8fcd2e5e03e6824012a485a0784cc43..0f90c7a57f038cae272be6822e4730d049156f40 100644
--- a/circuit/README.md
+++ b/circuit/README.md
@@ -9,3 +9,37 @@ The circuit uses an ATXmega256A3U microcontroller and a TMC262 step gate-driver,
The Half-Bridges benefit from a heatsink mounted beneath them (heat is conducted through the IC's large bottom contacts, and through vias into the coppler plane below, and are rated to ~ 8A of current, but care needs to be taken to cool them down under these conditions. I have measured 110c board temperature at 1.5A without any heatsinking or airflow.
Power is bussed into the board with two M3 Screw Terminals. The board is not polarity protected. Data is delivered on two Automatakit Ports, which each include a data line (uart TX / RX) and clock lines (CLKIN and CLKOUT).
+
+# BOM
+
+0.1uF
+470nF
+10uF
+
+1k
+470R
+10k
+
+Resonator
+LED Y,G,B
+RTD
+
+SHNT 2520
+PWRPAD
+2x3 6PIN
+RJ45
+
+RST BUTTON
+
+XMEGA
+VREG-AP2112
+RS-485-SN75C1168
+TMC262
+PNPAIR FDD8424
+AS5047D
+
+# Notes
+
+ - The 5V regulator inside the TMC262 is an LDO - ! Making 65c of heat when xposed to 12v, 105 when 24v. Not cool (haha)
+ - The fan is a good idea, but ? more plan
+ - when closing loops, will want tighter spi lines, and lookout pins on tmc phases - i.e. across one shunt, one set of fet gates, one phase - to see what's going on on the other side of the current regulator
\ No newline at end of file
diff --git a/circuit/atkstepper23/atkstepper23.brd b/circuit/atkstepper23/atkstepper23.brd
index b8aacd550f6f830b2e14d90a4b2fb75e4854b8b5..db3b6d77d0df22bac6091feb65dc9c484b5f52e8 100644
--- a/circuit/atkstepper23/atkstepper23.brd
+++ b/circuit/atkstepper23/atkstepper23.brd
@@ -3230,9 +3230,6 @@ design rules under a new name.</description>
<wire x1="48.7" y1="44.7" x2="49.0572" y2="44.7" width="0.1524" layer="16"/>
<wire x1="43.3" y1="44.1" x2="44.4" y2="45.2" width="0.1524" layer="16"/>
</signal>
-<signal name="ATK1-CLKIN">
-<contactref element="U1" pad="48"/>
-</signal>
<signal name="ATK0-RXLED">
<contactref element="U1" pad="40"/>
<contactref element="R1" pad="1"/>
diff --git a/circuit/atkstepper23/atkstepper23.lbr b/circuit/atkstepper23/atkstepper23.lbr
new file mode 100644
index 0000000000000000000000000000000000000000..79d57a9c18e20d3dba2fedaab8c0a1061e8da855
--- /dev/null
+++ b/circuit/atkstepper23/atkstepper23.lbr
@@ -0,0 +1,4971 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="9.1.1">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="1" unitdist="mic" unit="mic" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="2" name="Route2" color="16" fill="1" visible="no" active="yes"/>
+<layer number="3" name="Route3" color="17" fill="1" visible="no" active="yes"/>
+<layer number="4" name="Route4" color="18" fill="1" visible="no" active="yes"/>
+<layer number="5" name="Route5" color="19" fill="1" visible="no" active="yes"/>
+<layer number="6" name="Route6" color="25" fill="1" visible="no" active="yes"/>
+<layer number="7" name="Route7" color="26" fill="1" visible="no" active="yes"/>
+<layer number="8" name="Route8" color="27" fill="1" visible="no" active="yes"/>
+<layer number="9" name="Route9" color="28" fill="1" visible="no" active="yes"/>
+<layer number="10" name="Route10" color="29" fill="1" visible="no" active="yes"/>
+<layer number="11" name="Route11" color="30" fill="1" visible="no" active="yes"/>
+<layer number="12" name="Route12" color="20" fill="1" visible="no" active="yes"/>
+<layer number="13" name="Route13" color="21" fill="1" visible="no" active="yes"/>
+<layer number="14" name="Route14" color="22" fill="1" visible="no" active="yes"/>
+<layer number="15" name="Route15" color="23" fill="1" visible="no" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="20" name="Dimension" color="24" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="yes" active="yes"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="yes" active="yes"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="yes" active="yes"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="50" name="dxf" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="53" name="tGND_GNDA" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="54" name="bGND_GNDA" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="56" name="wert" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="57" name="tCAD" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="59" name="tCarbon" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="60" name="bCarbon" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="88" name="SimResults" color="9" fill="1" visible="yes" active="yes"/>
+<layer number="89" name="SimProbes" color="9" fill="1" visible="yes" active="yes"/>
+<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="99" name="SpiceOrder" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="100" name="Muster" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="101" name="Patch_Top" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="102" name="Vscore" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="103" name="tMap" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="104" name="Name" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="105" name="tPlate" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="106" name="bPlate" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="107" name="Crop" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="108" name="tplace-old" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="109" name="ref-old" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="110" name="fp0" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="111" name="LPC17xx" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="112" name="tSilk" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="113" name="IDFDebug" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="114" name="Badge_Outline" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="115" name="ReferenceISLANDS" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="116" name="Patch_BOT" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="117" name="BACKMAAT1" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="118" name="Rect_Pads" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="119" name="KAP_TEKEN" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="120" name="KAP_MAAT1" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="121" name="_tsilk" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="122" name="_bsilk" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="123" name="tTestmark" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="124" name="bTestmark" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="125" name="_tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="126" name="_bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="127" name="_tValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="128" name="_bValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="129" name="Mask" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="130" name="SMDSTROOK" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="131" name="tAdjust" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="132" name="bAdjust" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="133" name="bottom_silk" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="144" name="Drill_legend" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="150" name="Notes" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="151" name="HeatSink" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="152" name="_bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="153" name="FabDoc1" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="154" name="FabDoc2" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="155" name="FabDoc3" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="200" name="200bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="201" name="201bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="202" name="202bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="203" name="203bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="204" name="204bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="205" name="205bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="206" name="206bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="207" name="207bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="208" name="208bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="209" name="209bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="210" name="210bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="211" name="211bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="212" name="212bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="213" name="213bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="214" name="214bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="215" name="215bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="216" name="216bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="217" name="217bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="218" name="218bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="219" name="219bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="220" name="220bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="221" name="221bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="222" name="222bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="223" name="223bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="224" name="224bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="225" name="225bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="226" name="226bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="227" name="227bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="228" name="228bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="229" name="229bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="230" name="230bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="231" name="231bmp" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="232" name="Eagle3D_PG2" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="233" name="Eagle3D_PG3" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="248" name="Housing" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="249" name="Edge" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="250" name="Descript" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="251" name="SMDround" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="254" name="cooling" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="255" name="routoute" color="7" fill="1" visible="yes" active="yes"/>
+</layers>
+<library>
+<description>Generated from <b>atkstepper23.sch</b><p>
+by exp-lbrs.ulp</description>
+<packages>
+<package name="SPARKFUN-CONNECTORS_1X02">
+<description><h3>Plated Through Hole</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.143" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.143" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_2.54_SCREWTERM">
+<description><h3>2 Pin Screw Terminal - 2.54mm</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-1.5" y1="3.25" x2="4" y2="3.25" width="0.2032" layer="21"/>
+<wire x1="4" y1="3.25" x2="4" y2="2.5" width="0.2032" layer="21"/>
+<wire x1="4" y1="2.5" x2="4" y2="-3.25" width="0.2032" layer="21"/>
+<wire x1="4" y1="-3.25" x2="-1.5" y2="-3.25" width="0.2032" layer="21"/>
+<wire x1="-1.5" y1="-3.25" x2="-1.5" y2="2.5" width="0.2032" layer="21"/>
+<wire x1="-1.5" y1="2.5" x2="-1.5" y2="3.25" width="0.2032" layer="21"/>
+<wire x1="-1.5" y1="2.5" x2="4" y2="2.5" width="0.2032" layer="21"/>
+<pad name="P1" x="2.54" y="0" drill="1.016" shape="square"/>
+<pad name="P2" x="0" y="0" drill="1.016" shape="square"/>
+<text x="-1.27" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-4.064" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_BIG">
+<description><h3>Plated Through Hole</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.15"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-1.27" y1="1.27" x2="-1.27" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="-1.27" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-1.27" x2="5.08" y2="1.27" width="0.127" layer="21"/>
+<wire x1="5.08" y1="1.27" x2="-1.27" y2="1.27" width="0.127" layer="21"/>
+<pad name="P$1" x="0" y="0" drill="1.0668"/>
+<pad name="P$2" x="3.81" y="0" drill="1.0668"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_LOCK">
+<description><h3>Plated Through Hole - Locking Footprint</h3>
+Holes are staggered by 0.005" from center to hold pins while soldering.
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+<pad name="1" x="-0.1778" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.7178" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_LOCK_LONGPADS">
+<description><h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
+Pins are staggered by 0.005" from center to hold pins in place while soldering.
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="1.651" y1="0" x2="0.889" y2="0" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0" x2="-1.016" y2="0" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="0.9906" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.9906" x2="-0.9906" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="-0.9906" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.9906" x2="-0.9906" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0" x2="3.556" y2="0" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0" x2="3.81" y2="-0.9906" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.9906" x2="3.5306" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0" x2="3.81" y2="0.9906" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.9906" x2="3.5306" y2="1.27" width="0.2032" layer="21"/>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+<pad name="1" x="-0.127" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="2" x="2.667" y="0" drill="1.016" shape="long" rot="R90"/>
+<text x="-1.27" y="1.651" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.286" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_LONGPADS">
+<description><h3>Plated Through Hole - Long Pads without Silk Outline</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.397" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_NO_SILK">
+<description><h3>Plated Through Hole - No Silk Outline</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_POKEHOME">
+<description>2 pin poke-home connector
+
+part number 2062-2P from STA</description>
+<wire x1="-7" y1="-4" x2="-7" y2="2" width="0.2032" layer="21"/>
+<wire x1="-7" y1="2" x2="-7" y2="4" width="0.2032" layer="21"/>
+<wire x1="4.7" y1="4" x2="4.7" y2="-4" width="0.2032" layer="21"/>
+<wire x1="4.7" y1="-4" x2="-7" y2="-4" width="0.2032" layer="21"/>
+<wire x1="-7" y1="4" x2="4.7" y2="4" width="0.2032" layer="21"/>
+<smd name="P1" x="5.25" y="2" dx="3.5" dy="2" layer="1"/>
+<smd name="P2" x="5.25" y="-2" dx="3.5" dy="2" layer="1"/>
+<smd name="P3" x="-4" y="2" dx="6" dy="2" layer="1"/>
+<smd name="P4" x="-4" y="-2" dx="6" dy="2" layer="1"/>
+<text x="0.635" y="-3.175" size="0.4064" layer="25">>NAME</text>
+<text x="0.635" y="-1.905" size="0.4064" layer="27">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_PP_HOLES_ONLY">
+<description><h3>Pogo Pins Connector - No Silk Outline</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/>
+<circle x="2.54" y="0" radius="0.635" width="0.127" layer="51"/>
+<pad name="1" x="0" y="0" drill="0.889" diameter="0.8128" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="0.889" diameter="0.8128" rot="R90"/>
+<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+<hole x="0" y="0" drill="1.4732"/>
+<hole x="2.54" y="0" drill="1.4732"/>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_RA_PTH_FEMALE">
+<wire x1="-2.79" y1="4.25" x2="-2.79" y2="-4.25" width="0.1778" layer="21"/>
+<wire x1="2.79" y1="4.25" x2="2.79" y2="-4.25" width="0.1778" layer="21"/>
+<wire x1="-2.79" y1="4.25" x2="2.79" y2="4.25" width="0.1778" layer="21"/>
+<wire x1="-2.79" y1="-4.25" x2="2.79" y2="-4.25" width="0.1778" layer="21"/>
+<pad name="1" x="1.27" y="-5.85" drill="0.8"/>
+<pad name="2" x="-1.27" y="-5.85" drill="0.8"/>
+<text x="-1.397" y="0.762" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.524" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X02_XTRA_BIG">
+<description><h3>Plated Through Hole - 0.1" holes</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.2"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-5.08" y1="2.54" x2="-5.08" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="-5.08" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="5.08" y1="-2.54" x2="5.08" y2="2.54" width="0.127" layer="21"/>
+<wire x1="5.08" y1="2.54" x2="-5.08" y2="2.54" width="0.127" layer="21"/>
+<pad name="1" x="-2.54" y="0" drill="2.0574" diameter="3.556"/>
+<pad name="2" x="2.54" y="0" drill="2.0574" diameter="3.556"/>
+<text x="-5.08" y="2.667" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-5.08" y="-3.302" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04">
+<description><h3>Plated Through Hole - 4 Pin</h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="0.635" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="4" x="7.62" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_1.27MM">
+<description><h3>Plated Through Hole - 4 Pin</h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch: 1.27mm</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-0.381" y1="-0.889" x2="0.381" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="0.381" y1="-0.889" x2="0.635" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="0.635" y1="-0.635" x2="0.889" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="0.889" y1="-0.889" x2="1.651" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="1.651" y1="-0.889" x2="1.905" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="1.905" y1="-0.635" x2="2.159" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="2.159" y1="-0.889" x2="2.921" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="2.921" y1="-0.889" x2="3.175" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="3.175" y1="-0.635" x2="3.429" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="3.429" y1="-0.889" x2="4.191" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="4.191" y1="0.889" x2="3.429" y2="0.889" width="0.127" layer="21"/>
+<wire x1="3.429" y1="0.889" x2="3.175" y2="0.635" width="0.127" layer="21"/>
+<wire x1="3.175" y1="0.635" x2="2.921" y2="0.889" width="0.127" layer="21"/>
+<wire x1="2.921" y1="0.889" x2="2.159" y2="0.889" width="0.127" layer="21"/>
+<wire x1="2.159" y1="0.889" x2="1.905" y2="0.635" width="0.127" layer="21"/>
+<wire x1="1.905" y1="0.635" x2="1.651" y2="0.889" width="0.127" layer="21"/>
+<wire x1="1.651" y1="0.889" x2="0.889" y2="0.889" width="0.127" layer="21"/>
+<wire x1="0.889" y1="0.889" x2="0.635" y2="0.635" width="0.127" layer="21"/>
+<wire x1="0.635" y1="0.635" x2="0.381" y2="0.889" width="0.127" layer="21"/>
+<wire x1="0.381" y1="0.889" x2="-0.381" y2="0.889" width="0.127" layer="21"/>
+<wire x1="-0.381" y1="0.889" x2="-0.889" y2="0.381" width="0.127" layer="21"/>
+<wire x1="-0.889" y1="-0.381" x2="-0.381" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="-0.889" y1="0.381" x2="-0.889" y2="-0.381" width="0.127" layer="21"/>
+<wire x1="4.191" y1="0.889" x2="4.699" y2="0.381" width="0.127" layer="21"/>
+<wire x1="4.699" y1="0.381" x2="4.699" y2="-0.381" width="0.127" layer="21"/>
+<wire x1="4.699" y1="-0.381" x2="4.191" y2="-0.889" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0" drill="0.508" diameter="1"/>
+<pad name="2" x="1.27" y="0" drill="0.508" diameter="1"/>
+<pad name="3" x="2.54" y="0" drill="0.508" diameter="1"/>
+<pad name="4" x="3.81" y="0" drill="0.508" diameter="1"/>
+<text x="-0.508" y="1.016" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-0.508" y="-1.651" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_1MM_RA">
+<description><h3>SMD- 4 Pin Right Angle </h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<circle x="-2.5" y="0.3" radius="0.1414" width="0.4" layer="21"/>
+<wire x1="-1.5" y1="-4.6" x2="1.5" y2="-4.6" width="0.254" layer="21"/>
+<wire x1="-3" y1="-2" x2="-3" y2="-0.35" width="0.254" layer="21"/>
+<wire x1="2.25" y1="-0.35" x2="3" y2="-0.35" width="0.254" layer="21"/>
+<wire x1="3" y1="-0.35" x2="3" y2="-2" width="0.254" layer="21"/>
+<wire x1="-3" y1="-0.35" x2="-2.25" y2="-0.35" width="0.254" layer="21"/>
+<smd name="1" x="-1.5" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="2" x="-0.5" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="3" x="0.5" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="4" x="1.5" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="NC1" x="2.8" y="-3.675" dx="1.2" dy="2" layer="1"/>
+<smd name="NC2" x="-2.8" y="-3.675" dx="1.2" dy="2" layer="1"/>
+<text x="-1.397" y="-2.159" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.651" y="-3.302" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_LOCK">
+<description><h3>Plated Through Hole - 4 Pin Locking Footprint</h3>
+Pins are offset 0.005" from center to lock pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="0.635" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="4" x="7.62" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_LOCK_LONGPADS">
+<description><h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3>
+Holes are offset 0.005" from center to lock pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="1.524" y1="-0.127" x2="1.016" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="4.064" y1="-0.127" x2="3.556" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="6.604" y1="-0.127" x2="6.096" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.016" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="0.8636" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.8636" x2="-0.9906" y2="1.143" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="-1.1176" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-1.1176" x2="-0.9906" y2="-1.397" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.127" x2="8.636" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.127" x2="8.89" y2="-1.1176" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-1.1176" x2="8.6106" y2="-1.397" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.127" x2="8.89" y2="0.8636" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="0.8636" x2="8.6106" y2="1.143" width="0.2032" layer="21"/>
+<rectangle x1="-0.2921" y1="-0.4191" x2="0.2921" y2="0.1651" layer="51"/>
+<rectangle x1="2.2479" y1="-0.4191" x2="2.8321" y2="0.1651" layer="51"/>
+<rectangle x1="4.7879" y1="-0.4191" x2="5.3721" y2="0.1651" layer="51"/>
+<rectangle x1="7.3279" y1="-0.4191" x2="7.9121" y2="0.1651" layer="51" rot="R90"/>
+<pad name="1" x="0" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="-0.254" drill="1.016" shape="long" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="4" x="7.62" y="-0.254" drill="1.016" shape="long" rot="R90"/>
+<text x="-1.27" y="1.651" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_LONGPADS">
+<description><h3>Plated Through Hole - 4 Pin Long Pads</h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="0.635" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="4" x="7.62" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_NO_SILK">
+<description><h3>Plated Through Hole - 4 Pin No Silk Outline</h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="4" x="7.62" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_SMD_LONG">
+<description><h3>SMD - 4 Pin w/ Long Solder Pads</h3>
+No silk, but tDocu layer shows pin position.
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="5.08" y1="1.25" x2="-5.08" y2="1.25" width="0.127" layer="51"/>
+<wire x1="-5.08" y1="1.25" x2="-5.08" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="-5.08" y1="-1.25" x2="-3.81" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="-3.81" y1="-1.25" x2="-1.27" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="-1.27" y1="-1.25" x2="1.27" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="1.27" y1="-1.25" x2="3.81" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="3.81" y1="-1.25" x2="5.08" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="5.08" y1="-1.25" x2="5.08" y2="1.25" width="0.127" layer="51"/>
+<wire x1="3.81" y1="-1.25" x2="3.81" y2="-7.25" width="0.127" layer="51"/>
+<wire x1="1.27" y1="-1.25" x2="1.27" y2="-7.25" width="0.127" layer="51"/>
+<wire x1="-1.27" y1="-1.25" x2="-1.27" y2="-7.25" width="0.127" layer="51"/>
+<wire x1="-3.81" y1="-1.25" x2="-3.81" y2="-7.25" width="0.127" layer="51"/>
+<smd name="1" x="-3.81" y="5.5" dx="4" dy="1" layer="1" rot="R90"/>
+<smd name="2" x="-1.27" y="5.5" dx="4" dy="1" layer="1" rot="R90"/>
+<smd name="3" x="1.27" y="5.5" dx="4" dy="1" layer="1" rot="R90"/>
+<smd name="4" x="3.81" y="5.5" dx="4" dy="1" layer="1" rot="R90"/>
+<hole x="-2.54" y="0" drill="1.4"/>
+<hole x="2.54" y="0" drill="1.4"/>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_SMD_RA_FEMALE">
+<description><h3>SMD - 4 Pin Right-Angle Female Header</h3>
+Silk outline shows header location.
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-5.205" y1="4.25" x2="-5.205" y2="-4.25" width="0.1778" layer="21"/>
+<wire x1="5.205" y1="4.25" x2="-5.205" y2="4.25" width="0.1778" layer="21"/>
+<wire x1="5.205" y1="-4.25" x2="5.205" y2="4.25" width="0.1778" layer="21"/>
+<wire x1="-5.205" y1="-4.25" x2="5.205" y2="-4.25" width="0.1778" layer="21"/>
+<rectangle x1="-1.59" y1="6.8" x2="-0.95" y2="7.65" layer="51"/>
+<rectangle x1="0.95" y1="6.8" x2="1.59" y2="7.65" layer="51"/>
+<rectangle x1="-4.13" y1="6.8" x2="-3.49" y2="7.65" layer="51"/>
+<rectangle x1="3.49" y1="6.8" x2="4.13" y2="7.65" layer="51"/>
+<smd name="1" x="-3.81" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
+<smd name="2" x="-1.27" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
+<smd name="3" x="1.27" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
+<smd name="4" x="3.81" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
+<text x="-1.397" y="0.762" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.524" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_SMD_RA_MALE">
+<description><h3>SMD - 4 Pin Right Angle Male Header</h3>
+tDocu layer shows pin locations.
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="5.08" y1="1.25" x2="-5.08" y2="1.25" width="0.127" layer="51"/>
+<wire x1="-5.08" y1="1.25" x2="-5.08" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="-5.08" y1="-1.25" x2="-3.81" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="-3.81" y1="-1.25" x2="-1.27" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="-1.27" y1="-1.25" x2="1.27" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="1.27" y1="-1.25" x2="3.81" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="3.81" y1="-1.25" x2="5.08" y2="-1.25" width="0.127" layer="51"/>
+<wire x1="5.08" y1="-1.25" x2="5.08" y2="1.25" width="0.127" layer="51"/>
+<wire x1="3.81" y1="-1.25" x2="3.81" y2="-7.25" width="0.127" layer="51"/>
+<wire x1="1.27" y1="-1.25" x2="1.27" y2="-7.25" width="0.127" layer="51"/>
+<wire x1="-1.27" y1="-1.25" x2="-1.27" y2="-7.25" width="0.127" layer="51"/>
+<wire x1="-3.81" y1="-1.25" x2="-3.81" y2="-7.25" width="0.127" layer="51"/>
+<smd name="1" x="-3.81" y="5" dx="3" dy="1" layer="1" rot="R90"/>
+<smd name="2" x="-1.27" y="5" dx="3" dy="1" layer="1" rot="R90"/>
+<smd name="3" x="1.27" y="5" dx="3" dy="1" layer="1" rot="R90"/>
+<smd name="4" x="3.81" y="5" dx="3" dy="1" layer="1" rot="R90"/>
+<text x="-4.318" y="6.731" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-4.318" y="2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+<hole x="-2.54" y="0" drill="1.4"/>
+<hole x="2.54" y="0" drill="1.4"/>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X04_SMD_VERTICAL_COMBO">
+<description><h3>SMD - 4 Pin Vertical Connector</h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>SMD Pad count:8</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="7.62" y1="1.27" x2="7.62" y2="-1.27" width="0.4064" layer="1"/>
+<wire x1="5.08" y1="1.27" x2="5.08" y2="-1.27" width="0.4064" layer="1"/>
+<wire x1="2.54" y1="1.27" x2="2.54" y2="-1.27" width="0.4064" layer="1"/>
+<wire x1="0" y1="1.27" x2="0" y2="-1.27" width="0.4064" layer="1"/>
+<wire x1="-1.37" y1="-1.25" x2="-1.37" y2="1.25" width="0.1778" layer="21"/>
+<wire x1="8.99" y1="1.25" x2="8.99" y2="-1.25" width="0.1778" layer="21"/>
+<wire x1="-0.73" y1="-1.25" x2="-1.37" y2="-1.25" width="0.1778" layer="21"/>
+<wire x1="8.99" y1="-1.25" x2="8.32" y2="-1.25" width="0.1778" layer="21"/>
+<wire x1="8.32" y1="1.25" x2="8.99" y2="1.25" width="0.1778" layer="21"/>
+<wire x1="-1.37" y1="1.25" x2="-0.73" y2="1.25" width="0.1778" layer="21"/>
+<wire x1="5.869" y1="-1.29" x2="6.831" y2="-1.29" width="0.1778" layer="21"/>
+<wire x1="5.869" y1="1.25" x2="6.831" y2="1.25" width="0.1778" layer="21"/>
+<wire x1="3.329" y1="-1.29" x2="4.291" y2="-1.29" width="0.1778" layer="21"/>
+<wire x1="3.329" y1="1.25" x2="4.291" y2="1.25" width="0.1778" layer="21"/>
+<wire x1="0.789" y1="-1.29" x2="1.751" y2="-1.29" width="0.1778" layer="21"/>
+<wire x1="0.789" y1="1.25" x2="1.751" y2="1.25" width="0.1778" layer="21"/>
+<smd name="1" x="0" y="-1.65" dx="2" dy="1" layer="1" rot="R270"/>
+<smd name="1-2" x="0" y="1.65" dx="2" dy="1" layer="1" rot="R90"/>
+<smd name="2" x="2.54" y="1.65" dx="2" dy="1" layer="1" rot="R270"/>
+<smd name="2-2" x="2.54" y="-1.65" dx="2" dy="1" layer="1" rot="R90"/>
+<smd name="3" x="5.08" y="-1.65" dx="2" dy="1" layer="1" rot="R270"/>
+<smd name="3-2" x="5.08" y="1.65" dx="2" dy="1" layer="1" rot="R90"/>
+<smd name="4" x="7.62" y="1.65" dx="2" dy="1" layer="1" rot="R270"/>
+<smd name="4-2" x="7.62" y="-1.65" dx="2" dy="1" layer="1" rot="R90"/>
+<text x="-0.508" y="2.921" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-0.508" y="-3.429" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05">
+<description><h3>Plated Through Hole - 5 Pin</h3>
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="0.635" x2="9.525" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="9.525" y1="1.27" x2="10.795" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="10.795" y1="1.27" x2="11.43" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="-0.635" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="10.795" y1="-1.27" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="9.525" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="0.635" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="4" x="7.62" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="5" x="10.16" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_1.27MM">
+<description><h3>Plated Through Hole - 5 Pin</h3>
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch: 1.27mm</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="-0.381" y1="-0.889" x2="0.381" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="0.381" y1="-0.889" x2="0.635" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="0.635" y1="-0.635" x2="0.889" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="0.889" y1="-0.889" x2="1.651" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="1.651" y1="-0.889" x2="1.905" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="1.905" y1="-0.635" x2="2.159" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="2.159" y1="-0.889" x2="2.921" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="2.921" y1="-0.889" x2="3.175" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="3.175" y1="-0.635" x2="3.429" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="3.429" y1="-0.889" x2="4.191" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="4.191" y1="-0.889" x2="4.445" y2="-0.635" width="0.127" layer="21"/>
+<wire x1="4.445" y1="-0.635" x2="4.699" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="4.699" y1="-0.889" x2="5.461" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="5.461" y1="0.889" x2="4.699" y2="0.889" width="0.127" layer="21"/>
+<wire x1="4.699" y1="0.889" x2="4.445" y2="0.635" width="0.127" layer="21"/>
+<wire x1="4.445" y1="0.635" x2="4.191" y2="0.889" width="0.127" layer="21"/>
+<wire x1="4.191" y1="0.889" x2="3.429" y2="0.889" width="0.127" layer="21"/>
+<wire x1="3.429" y1="0.889" x2="3.175" y2="0.635" width="0.127" layer="21"/>
+<wire x1="3.175" y1="0.635" x2="2.921" y2="0.889" width="0.127" layer="21"/>
+<wire x1="2.921" y1="0.889" x2="2.159" y2="0.889" width="0.127" layer="21"/>
+<wire x1="2.159" y1="0.889" x2="1.905" y2="0.635" width="0.127" layer="21"/>
+<wire x1="1.905" y1="0.635" x2="1.651" y2="0.889" width="0.127" layer="21"/>
+<wire x1="1.651" y1="0.889" x2="0.889" y2="0.889" width="0.127" layer="21"/>
+<wire x1="0.889" y1="0.889" x2="0.635" y2="0.635" width="0.127" layer="21"/>
+<wire x1="0.635" y1="0.635" x2="0.381" y2="0.889" width="0.127" layer="21"/>
+<wire x1="0.381" y1="0.889" x2="-0.381" y2="0.889" width="0.127" layer="21"/>
+<wire x1="-0.381" y1="0.889" x2="-0.889" y2="0.381" width="0.127" layer="21"/>
+<wire x1="-0.889" y1="-0.381" x2="-0.381" y2="-0.889" width="0.127" layer="21"/>
+<wire x1="-0.889" y1="0.381" x2="-0.889" y2="-0.381" width="0.127" layer="21"/>
+<wire x1="5.461" y1="0.889" x2="5.969" y2="0.381" width="0.127" layer="21"/>
+<wire x1="5.969" y1="0.381" x2="5.969" y2="-0.381" width="0.127" layer="21"/>
+<wire x1="5.969" y1="-0.381" x2="5.461" y2="-0.889" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0" drill="0.508" diameter="1"/>
+<pad name="2" x="1.27" y="0" drill="0.508" diameter="1"/>
+<pad name="3" x="2.54" y="0" drill="0.508" diameter="1"/>
+<pad name="4" x="3.81" y="0" drill="0.508" diameter="1"/>
+<pad name="5" x="5.08" y="0" drill="0.508" diameter="1"/>
+<text x="-0.381" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-0.508" y="-1.651" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_1MM">
+<description><h3>SMD - 5 Pin</h3>
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p><a href=”http://www.sparkfun.com/datasheets/GPS/EM408-SMDConnector.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+<li>EM-408</li>
+</ul></p></description>
+<wire x1="2" y1="2.921" x2="-2.08" y2="2.921" width="0.254" layer="21"/>
+<wire x1="3.778" y1="0.762" x2="3.778" y2="-0.635" width="0.254" layer="21"/>
+<wire x1="-2.842" y1="-0.635" x2="-3.858" y2="-0.635" width="0.254" layer="21"/>
+<wire x1="-3.858" y1="-0.635" x2="-3.858" y2="0.762" width="0.254" layer="21"/>
+<wire x1="3.778" y1="-0.635" x2="2.762" y2="-0.635" width="0.254" layer="21"/>
+<smd name="1" x="-2" y="0" dx="0.6" dy="1.55" layer="1" rot="R180"/>
+<smd name="2" x="-1" y="0" dx="0.6" dy="1.55" layer="1" rot="R180"/>
+<smd name="3" x="0" y="0" dx="0.6" dy="1.55" layer="1" rot="R180"/>
+<smd name="4" x="1" y="0" dx="0.6" dy="1.55" layer="1" rot="R180"/>
+<smd name="5" x="2" y="0" dx="0.6" dy="1.55" layer="1" rot="R180"/>
+<smd name="NC1" x="-3.3" y="2.225" dx="1.2" dy="1.8" layer="1" rot="R180"/>
+<smd name="NC2" x="3.3" y="2.225" dx="1.2" dy="1.8" layer="1" rot="R180"/>
+<text x="-1.524" y="1.905" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.524" y="1.143" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_1MM_RA">
+<description><h3>SMD - 5 Pin Right Angle</h3>
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<circle x="-3" y="0.3" radius="0.1414" width="0.4" layer="21"/>
+<wire x1="-2" y1="-4.6" x2="2" y2="-4.6" width="0.254" layer="21"/>
+<wire x1="-3.5" y1="-2" x2="-3.5" y2="-0.35" width="0.254" layer="21"/>
+<wire x1="2.75" y1="-0.35" x2="3.5" y2="-0.35" width="0.254" layer="21"/>
+<wire x1="3.5" y1="-0.35" x2="3.5" y2="-2" width="0.254" layer="21"/>
+<wire x1="-3.5" y1="-0.35" x2="-2.75" y2="-0.35" width="0.254" layer="21"/>
+<smd name="1" x="-2" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="2" x="-1" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="3" x="0" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="4" x="1" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="5" x="2" y="0" dx="0.6" dy="1.35" layer="1"/>
+<smd name="NC1" x="3.3" y="-3.675" dx="1.2" dy="2" layer="1"/>
+<smd name="NC2" x="-3.3" y="-3.675" dx="1.2" dy="2" layer="1"/>
+<text x="-1.397" y="-2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.651" y="-3.302" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_LOCK">
+<description><h3>Plated Through Hole - 5 Pin with Locking Footprint</h3>
+Holes are offset 0.005" from center, locking pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.89" y1="0.635" x2="9.525" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="9.525" y1="1.27" x2="10.795" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="10.795" y1="1.27" x2="11.43" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="-0.635" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="10.795" y1="-1.27" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="9.525" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="0.635" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="4" x="7.62" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="5" x="10.16" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_LOCK_LONGPADS">
+<description><h3>Plated Through Hole - 5 Pin Long Pad with Locking Footprint</h3>
+Holes are offset 0.005" from center, locking pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="1.524" y1="-0.127" x2="1.016" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="4.064" y1="-0.127" x2="3.556" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="6.604" y1="-0.127" x2="6.096" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="9.144" y1="-0.127" x2="8.636" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.016" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="0.8636" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="0.8636" x2="-0.9906" y2="1.143" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="-1.1176" width="0.2032" layer="21"/>
+<wire x1="-1.27" y1="-1.1176" x2="-0.9906" y2="-1.397" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="-0.127" x2="11.176" y2="-0.127" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="-0.127" x2="11.43" y2="-1.1176" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="-1.1176" x2="11.1506" y2="-1.397" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="-0.127" x2="11.43" y2="0.8636" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="0.8636" x2="11.1506" y2="1.143" width="0.2032" layer="21"/>
+<rectangle x1="-0.2921" y1="-0.4191" x2="0.2921" y2="0.1651" layer="51"/>
+<rectangle x1="2.2479" y1="-0.4191" x2="2.8321" y2="0.1651" layer="51"/>
+<rectangle x1="4.7879" y1="-0.4191" x2="5.3721" y2="0.1651" layer="51"/>
+<rectangle x1="7.3279" y1="-0.4191" x2="7.9121" y2="0.1651" layer="51" rot="R90"/>
+<rectangle x1="9.8679" y1="-0.4191" x2="10.4521" y2="0.1651" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="-0.254" drill="1.016" shape="long" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" shape="long" rot="R90"/>
+<pad name="4" x="7.62" y="-0.254" drill="1.016" shape="long" rot="R90"/>
+<pad name="5" x="10.16" y="0" drill="1.016" shape="long" rot="R90"/>
+<text x="-1.27" y="1.778" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.397" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_LONGPADS">
+<description><h3>Plated Through Hole - 5 Pin Long Pads</h3>
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
+<wire x1="11.43" y1="0.635" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
+<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="4" x="7.62" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<pad name="5" x="10.16" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
+<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_1X05_NO_SILK">
+<description><h3>Plated Through Hole - 5 Pin No Silk Outline</h3>
+<p>Specifications:
+<ul><li>Pin count:5</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<rectangle x1="9.906" y1="-0.254" x2="10.414" y2="0.254" layer="51"/>
+<rectangle x1="7.366" y1="-0.254" x2="7.874" y2="0.254" layer="51"/>
+<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
+<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
+<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="4" x="7.62" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<pad name="5" x="10.16" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
+<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-2-PTH">
+<description><h3>JST 2 Pin Right Angle Plated Through Hole</h3>
+tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch:2mm</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-2.95" y1="-1.6" x2="-2.95" y2="6" width="0.2032" layer="21"/>
+<wire x1="-2.95" y1="6" x2="2.95" y2="6" width="0.2032" layer="21"/>
+<wire x1="2.95" y1="6" x2="2.95" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="-2.95" y1="-1.6" x2="-2.3" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="2.95" y1="-1.6" x2="2.3" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-1.6" x2="-2.3" y2="0" width="0.2032" layer="21"/>
+<wire x1="2.3" y1="-1.6" x2="2.3" y2="0" width="0.2032" layer="21"/>
+<pad name="1" x="-1" y="0" drill="0.7" diameter="1.6"/>
+<pad name="2" x="1" y="0" drill="0.7" diameter="1.6"/>
+<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text>
+<text x="-1.27" y="2.73" size="0.6096" layer="27" font="vector" ratio="20">>Value</text>
+<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-2-PTH-KIT">
+<description><h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
+tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
+<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
+<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch:2mm</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/>
+<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/>
+<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/>
+<pad name="1" x="-1" y="0" drill="0.7" diameter="1.4478" stop="no"/>
+<pad name="2" x="1" y="0" drill="0.7" diameter="1.4478" stop="no"/>
+<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text>
+<text x="-1.27" y="4" size="0.6096" layer="27" font="vector" ratio="20">>Value</text>
+<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+<polygon width="0.127" layer="30">
+<vertex x="-0.9975" y="-0.6604" curve="-90.025935"/>
+<vertex x="-1.6604" y="0" curve="-90.017354"/>
+<vertex x="-1" y="0.6604" curve="-90"/>
+<vertex x="-0.3396" y="0" curve="-90.078137"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="-1" y="-0.2865" curve="-90.08005"/>
+<vertex x="-1.2865" y="0" curve="-90.040011"/>
+<vertex x="-1" y="0.2865" curve="-90"/>
+<vertex x="-0.7135" y="0" curve="-90"/>
+</polygon>
+<polygon width="0.127" layer="30">
+<vertex x="1.0025" y="-0.6604" curve="-90.025935"/>
+<vertex x="0.3396" y="0" curve="-90.017354"/>
+<vertex x="1" y="0.6604" curve="-90"/>
+<vertex x="1.6604" y="0" curve="-90.078137"/>
+</polygon>
+<polygon width="0.127" layer="29">
+<vertex x="1" y="-0.2865" curve="-90.08005"/>
+<vertex x="0.7135" y="0" curve="-90.040011"/>
+<vertex x="1" y="0.2865" curve="-90"/>
+<vertex x="1.2865" y="0" curve="-90"/>
+</polygon>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-2-PTH-NS">
+<description><h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
+tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
+<br> No silk outline of connector.
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch:2mm</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-2" y1="0" x2="-2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-2" y1="-1.8" x2="-3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="-3" y1="-1.8" x2="-3" y2="6" width="0.2032" layer="51"/>
+<wire x1="-3" y1="6" x2="3" y2="6" width="0.2032" layer="51"/>
+<wire x1="3" y1="6" x2="3" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="3" y1="-1.8" x2="2" y2="-1.8" width="0.2032" layer="51"/>
+<wire x1="2" y1="-1.8" x2="2" y2="0" width="0.2032" layer="51"/>
+<pad name="1" x="-1" y="0" drill="0.7" diameter="1.6"/>
+<pad name="2" x="1" y="0" drill="0.7" diameter="1.6"/>
+<text x="-1.27" y="5.27" size="0.6096" layer="25" font="vector" ratio="20">>Name</text>
+<text x="-1.27" y="4" size="0.6096" layer="27" font="vector" ratio="20">>Value</text>
+<text x="0.6" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-2-SMD">
+<description><h3>JST-Right Angle Male Header SMT</h3>
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch: 2mm</li>
+</ul></p>
+<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+<li>JST_2MM_MALE</li>
+</ul></p></description>
+<wire x1="-4" y1="-1" x2="-4" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="-4" y1="-4.5" x2="-3.2" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="-3.2" y1="-4.5" x2="-3.2" y2="-2" width="0.2032" layer="21"/>
+<wire x1="-3.2" y1="-2" x2="-2" y2="-2" width="0.2032" layer="21"/>
+<wire x1="2" y1="-2" x2="3.2" y2="-2" width="0.2032" layer="21"/>
+<wire x1="3.2" y1="-2" x2="3.2" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="3.2" y1="-4.5" x2="4" y2="-4.5" width="0.2032" layer="21"/>
+<wire x1="4" y1="-4.5" x2="4" y2="-1" width="0.2032" layer="21"/>
+<wire x1="2" y1="3" x2="-2" y2="3" width="0.2032" layer="21"/>
+<smd name="1" x="-1" y="-3.7" dx="1" dy="4.6" layer="1"/>
+<smd name="2" x="1" y="-3.7" dx="1" dy="4.6" layer="1"/>
+<smd name="NC1" x="-3.4" y="1.5" dx="3.4" dy="1.6" layer="1" rot="R90"/>
+<smd name="NC2" x="3.4" y="1.5" dx="3.4" dy="1.6" layer="1" rot="R90"/>
+<text x="-1.397" y="1.778" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.651" y="0.635" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-2-SMD-VERT">
+<description><h3>JST-Vertical Male Header SMT </h3>
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch: 2mm</li>
+</ul></p>
+<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-4.1" y1="2.97" x2="4.2" y2="2.97" width="0.2032" layer="51"/>
+<wire x1="4.2" y1="2.97" x2="4.2" y2="-2.13" width="0.2032" layer="51"/>
+<wire x1="4.2" y1="-2.13" x2="-4.1" y2="-2.13" width="0.2032" layer="51"/>
+<wire x1="-4.1" y1="-2.13" x2="-4.1" y2="2.97" width="0.2032" layer="51"/>
+<wire x1="-4.1" y1="3" x2="4.2" y2="3" width="0.2032" layer="21"/>
+<wire x1="4.2" y1="3" x2="4.2" y2="2.3" width="0.2032" layer="21"/>
+<wire x1="-4.1" y1="3" x2="-4.1" y2="2.3" width="0.2032" layer="21"/>
+<wire x1="2" y1="-2.1" x2="4.2" y2="-2.1" width="0.2032" layer="21"/>
+<wire x1="4.2" y1="-2.1" x2="4.2" y2="-1.7" width="0.2032" layer="21"/>
+<wire x1="-2" y1="-2.1" x2="-4.1" y2="-2.1" width="0.2032" layer="21"/>
+<wire x1="-4.1" y1="-2.1" x2="-4.1" y2="-1.8" width="0.2032" layer="21"/>
+<smd name="GND" x="1" y="-2" dx="1" dy="5.5" layer="1"/>
+<smd name="P$1" x="-3.4" y="0.27" dx="3" dy="1.6" layer="1" rot="R90"/>
+<smd name="P$2" x="3.4" y="0.27" dx="3" dy="1.6" layer="1" rot="R90"/>
+<smd name="VCC" x="-1" y="-2" dx="1" dy="5.5" layer="1"/>
+<text x="-3.81" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>Name</text>
+<text x="-3.81" y="2.21" size="0.6096" layer="27" font="vector" ratio="20">>Value</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-4-PTH">
+<description><h3>JST Right Angle 4 Pin Plated Through Hole</h3>
+<p>Specifications:
+<ul><li>Pin count: 4</li>
+<li>Pin pitch: 2mm</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-4.95" y1="-1.6" x2="-4.95" y2="6" width="0.2032" layer="21"/>
+<wire x1="-4.95" y1="6" x2="4.95" y2="6" width="0.2032" layer="21"/>
+<wire x1="4.95" y1="6" x2="4.95" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="-4.95" y1="-1.6" x2="-4.3" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="4.95" y1="-1.6" x2="4.3" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="-4.3" y1="-1.6" x2="-4.3" y2="0" width="0.2032" layer="21"/>
+<wire x1="4.3" y1="-1.6" x2="4.3" y2="0" width="0.2032" layer="21"/>
+<pad name="1" x="-3" y="0" drill="0.7" diameter="1.6"/>
+<pad name="2" x="-1" y="0" drill="0.7" diameter="1.6"/>
+<pad name="3" x="1" y="0" drill="0.7" diameter="1.6"/>
+<pad name="4" x="3" y="0" drill="0.7" diameter="1.6"/>
+<text x="-3.4" y="0.7" size="1.27" layer="51">+</text>
+<text x="-1.4" y="0.7" size="1.27" layer="51">-</text>
+<text x="0.7" y="0.9" size="0.8" layer="51">S</text>
+<text x="2.7" y="0.9" size="0.8" layer="51">S</text>
+<text x="-1.397" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.651" y="2.54" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-4-PTH-VERT">
+<description><h3>JST Vertical 4 Pin Plated Through Hole</h3>
+<p>Specifications:
+<ul><li>Pin count: 4</li>
+<li>Pin pitch: 2mm</li>
+</ul></p>
+<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-4.95" y1="-2.25" x2="-4.95" y2="2.25" width="0.2032" layer="21"/>
+<wire x1="-4.95" y1="2.25" x2="4.95" y2="2.25" width="0.2032" layer="21"/>
+<wire x1="4.95" y1="-2.25" x2="1" y2="-2.25" width="0.2032" layer="21"/>
+<wire x1="-1" y1="-2.25" x2="-4.95" y2="-2.25" width="0.2032" layer="21"/>
+<wire x1="-1" y1="-1.75" x2="1" y2="-1.75" width="0.2032" layer="21"/>
+<wire x1="1" y1="-1.75" x2="1" y2="-2.25" width="0.2032" layer="21"/>
+<wire x1="-1" y1="-1.75" x2="-1" y2="-2.25" width="0.2032" layer="21"/>
+<wire x1="4.95" y1="2.25" x2="4.95" y2="-2.25" width="0.2032" layer="21"/>
+<pad name="1" x="-3" y="-0.55" drill="0.7" diameter="1.6"/>
+<pad name="2" x="-1" y="-0.55" drill="0.7" diameter="1.6"/>
+<pad name="3" x="1" y="-0.55" drill="0.7" diameter="1.6"/>
+<pad name="4" x="3" y="-0.55" drill="0.7" diameter="1.6"/>
+<text x="-1.4" y="0.75" size="1.27" layer="51">+</text>
+<text x="0.6" y="0.75" size="1.27" layer="51">-</text>
+<text x="2.7" y="0.95" size="0.8" layer="51">Y</text>
+<text x="-3.3" y="0.95" size="0.8" layer="51">B</text>
+<text x="-1.143" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.651" y="-3.302" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-5-PTH">
+<description><h3>JST 5 Pin Right Angle Plated Through Hole</h3>
+<p>Specifications:
+<ul><li>Pin count: 5</li>
+<li>Pin pitch: 2mm</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="-5.95" y1="-1.6" x2="-5.95" y2="6" width="0.2032" layer="21"/>
+<wire x1="-5.95" y1="6" x2="5.95" y2="6" width="0.2032" layer="21"/>
+<wire x1="5.95" y1="6" x2="5.95" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="-5.95" y1="-1.6" x2="-5.3" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="5.95" y1="-1.6" x2="5.3" y2="-1.6" width="0.2032" layer="21"/>
+<wire x1="-5.3" y1="-1.6" x2="-5.3" y2="0" width="0.2032" layer="21"/>
+<wire x1="5.3" y1="-1.6" x2="5.3" y2="0" width="0.2032" layer="21"/>
+<pad name="1" x="-4" y="0" drill="0.7" diameter="1.6"/>
+<pad name="2" x="-2" y="0" drill="0.7" diameter="1.6"/>
+<pad name="3" x="0" y="0" drill="0.7" diameter="1.6"/>
+<pad name="4" x="2" y="0" drill="0.7" diameter="1.6"/>
+<pad name="5" x="4" y="0" drill="0.7" diameter="1.6"/>
+<text x="-1.397" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.651" y="2.413" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_JST-5-PTH-VERT">
+<description><h3>JST 5 Pin Vertical Plated Through Hole</h3>
+<p>Specifications:
+<ul><li>Pin count: 5</li>
+<li>Pin pitch: 2mm</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="-5.95" y1="-1.52" x2="-5.95" y2="2.98" width="0.2032" layer="21"/>
+<wire x1="-5.95" y1="2.98" x2="5.95" y2="2.98" width="0.2032" layer="21"/>
+<wire x1="5.95" y1="-1.52" x2="1" y2="-1.52" width="0.2032" layer="21"/>
+<wire x1="-1" y1="-1.52" x2="-5.95" y2="-1.52" width="0.2032" layer="21"/>
+<wire x1="-1" y1="-1.02" x2="1" y2="-1.02" width="0.2032" layer="21"/>
+<wire x1="1" y1="-1.02" x2="1" y2="-1.52" width="0.2032" layer="21"/>
+<wire x1="-1" y1="-1.02" x2="-1" y2="-1.52" width="0.2032" layer="21"/>
+<wire x1="5.95" y1="2.98" x2="5.95" y2="-1.52" width="0.2032" layer="21"/>
+<pad name="1" x="-4" y="0.18" drill="0.7" diameter="1.6"/>
+<pad name="2" x="-2" y="0.18" drill="0.7" diameter="1.6"/>
+<pad name="3" x="0" y="0.18" drill="0.7" diameter="1.6"/>
+<pad name="4" x="2" y="0.18" drill="0.7" diameter="1.6"/>
+<pad name="5" x="4" y="0.18" drill="0.7" diameter="1.6"/>
+<text x="-1.651" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.905" y="-2.54" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_MOLEX-1X2">
+<description><h3>Molex 2-Pin Plated Through-Hole</h3>
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="3.81" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="3.81" y1="-2.54" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="2.54" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-1.27" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
+<text x="-1.27" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.794" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_MOLEX-1X2_LOCK">
+<description><h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
+Holes are offset from center by 0.005" to hold pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count:2</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="3.81" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="3.81" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="3.81" y1="-2.54" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="2.54" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="2.54" y1="-1.27" x2="2.54" y2="-2.54" width="0.127" layer="21"/>
+<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
+<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
+<pad name="1" x="-0.127" y="0" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.667" y="0" drill="1.016" diameter="1.8796"/>
+<text x="-1.27" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="-2.794" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_MOLEX-1X4">
+<description><h3>Molex 4-Pin Plated Through-Hole</h3>
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="8.89" y1="3.048" x2="8.89" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="8.89" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="8.89" y1="-2.54" x2="7.62" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="7.62" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="7.62" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="7.62" y1="-1.27" x2="7.62" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
+<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796"/>
+<pad name="4" x="7.62" y="0" drill="1.016" diameter="1.8796"/>
+<text x="2.286" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="2.286" y="-3.429" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_MOLEX-1X4_LOCK">
+<description><h3>Molex 4-Pin Plated Through-Hole Locking</h3>
+Holes are offset 0.005" from center to hold pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count:4</li>
+<li>Pin pitch:0.1"</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="8.89" y1="3.048" x2="8.89" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="8.89" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
+<wire x1="8.89" y1="-2.54" x2="7.62" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="7.62" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
+<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="0" y1="-1.27" x2="7.62" y2="-1.27" width="0.127" layer="21"/>
+<wire x1="7.62" y1="-1.27" x2="7.62" y2="-2.54" width="0.127" layer="21"/>
+<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" shape="square"/>
+<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796"/>
+<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796"/>
+<pad name="4" x="7.62" y="-0.127" drill="1.016" diameter="1.8796"/>
+<text x="2.667" y="3.302" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="2.032" y="-3.556" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-2">
+<description><h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch: 3.5mm/138mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
+<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.75" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.75" y1="3.15" x2="5.75" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.75" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-2-NS">
+<description><h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch: 3.5mm/138mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
+<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.4" x2="5.25" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="2.15" x2="5.25" y2="-2.8" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-2.35" x2="-1.75" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-1.35" x2="-1.75" y2="3.4" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-2_LOCK">
+<description><h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
+Holes are offset from center 0.005" to hold pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch: 3.5mm/138mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<circle x="2" y="3" radius="0.2828" width="0.127" layer="51"/>
+<circle x="0" y="0" radius="0.4318" width="0.0254" layer="51"/>
+<circle x="3.5" y="0" radius="0.4318" width="0.0254" layer="51"/>
+<wire x1="-1.75" y1="3.4" x2="5.25" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="3.4" x2="5.25" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="5.25" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="5.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.15" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-1.35" x2="-2.15" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.15" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="5.25" y1="3.15" x2="5.65" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="3.15" x2="5.65" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="5.65" y1="2.15" x2="5.25" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="-0.1778" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.6778" y="0" drill="1.2" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-4">
+<description><h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3>
+<p>Specifications:
+<ul><li>Pin count: 4</li>
+<li>Pin pitch: 3.5mm/138mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<circle x="0" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="3.5" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="7" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="10.5" y="0" radius="0.425" width="0.001" layer="51"/>
+<wire x1="-1.75" y1="3.4" x2="12.25" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="12.25" y1="3.4" x2="12.25" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="12.25" y1="-2.8" x2="12.25" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="12.25" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="12.25" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="12.25" y1="3.15" x2="12.75" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="12.75" y1="3.15" x2="12.75" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="12.75" y1="2.15" x2="12.25" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<pad name="3" x="7" y="0" drill="1.2" diameter="2.032"/>
+<pad name="4" x="10.5" y="0" drill="1.2" diameter="2.032"/>
+<text x="0" y="2.413" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="0" y="-2.286" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-4_LOCK">
+<description><h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3>
+Holes are offset 0.005" from center to hold pins in place during soldering.
+<p>Specifications:
+<ul><li>Pin count: 4</li>
+<li>Pin pitch: 3.5mm/138mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_04</li>
+</ul></p></description>
+<circle x="0" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="3.5" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="7" y="0" radius="0.425" width="0.001" layer="51"/>
+<circle x="10.5" y="0" radius="0.425" width="0.001" layer="51"/>
+<wire x1="-2.3" y1="3.4" x2="12.8" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="12.8" y1="3.4" x2="12.8" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="12.8" y1="-2.8" x2="12.8" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="12.8" y1="-3.6" x2="-2.3" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-3.6" x2="-2.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-2.8" x2="-2.3" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="12.8" y1="-2.8" x2="-2.3" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-2.3" y1="-1.35" x2="-2.7" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.7" y1="-1.35" x2="-2.7" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.7" y1="-2.35" x2="-2.3" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="12.8" y1="3.15" x2="13.2" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="13.2" y1="3.15" x2="13.2" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="13.2" y1="2.15" x2="12.8" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="-0.1778" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.6778" y="0" drill="1.2" diameter="2.032"/>
+<pad name="3" x="6.8222" y="0" drill="1.2" diameter="2.032"/>
+<pad name="4" x="10.6778" y="0" drill="1.2" diameter="2.032"/>
+<text x="3.81" y="2.413" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="3.81" y="1.524" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-5">
+<description><h3>Screw Terminal 3.5mm Pitch -5 Pin PTH</h3>
+<p>Specifications:
+<ul><li>Pin count: 5</li>
+<li>Pin pitch: 3.5mm/138mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_05</li>
+</ul></p></description>
+<wire x1="-1.75" y1="3.4" x2="15.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="15.75" y1="3.4" x2="15.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="15.75" y1="-2.8" x2="15.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="15.75" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
+<wire x1="15.75" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
+<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="15.75" y1="3.15" x2="16.25" y2="3.15" width="0.2032" layer="51"/>
+<wire x1="16.25" y1="3.15" x2="16.25" y2="2.15" width="0.2032" layer="51"/>
+<wire x1="16.25" y1="2.15" x2="15.75" y2="2.15" width="0.2032" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.2" diameter="2.032" shape="square"/>
+<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
+<pad name="3" x="7" y="0" drill="1.2" diameter="2.032"/>
+<pad name="4" x="10.5" y="0" drill="1.2" diameter="2.032"/>
+<pad name="5" x="14" y="0" drill="1.2" diameter="2.032"/>
+<text x="5.588" y="2.413" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="5.334" y="1.524" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SCREWTERMINAL-5MM-2">
+<description><h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
+<p>Specifications:
+<ul><li>Pin count: 2</li>
+<li>Pin pitch: 5mm/197mil</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<circle x="2.5" y="3.7" radius="0.2828" width="0.127" layer="51"/>
+<wire x1="-3.1" y1="4.2" x2="8.1" y2="4.2" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="4.2" x2="8.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="-2.3" x2="8.1" y2="-3.3" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="-3.3" x2="-3.1" y2="-3.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-3.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-2.3" x2="-3.1" y2="4.2" width="0.2032" layer="21"/>
+<wire x1="8.1" y1="-2.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
+<wire x1="-3.1" y1="-1.35" x2="-3.7" y2="-1.35" width="0.2032" layer="51"/>
+<wire x1="-3.7" y1="-1.35" x2="-3.7" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="-3.7" y1="-2.35" x2="-3.1" y2="-2.35" width="0.2032" layer="51"/>
+<wire x1="8.1" y1="4" x2="8.7" y2="4" width="0.2032" layer="51"/>
+<wire x1="8.7" y1="4" x2="8.7" y2="3" width="0.2032" layer="51"/>
+<wire x1="8.7" y1="3" x2="8.1" y2="3" width="0.2032" layer="51"/>
+<pad name="1" x="0" y="0" drill="1.3" diameter="2.032" shape="square"/>
+<pad name="2" x="5" y="0" drill="1.3" diameter="2.032"/>
+<text x="-1.27" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.27" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="SPARKFUN-CONNECTORS_SPRINGTERMINAL-2.54MM-2">
+<description><h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
+tDocu marks the spring arms
+<p>Specifications:
+<ul><li>Pin count: 4</li>
+<li>Pin pitch: 0.1"</li>
+</ul></p>
+<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
+<p>Example device(s):
+<ul><li>CONN_02</li>
+</ul></p></description>
+<wire x1="-4.2" y1="7.88" x2="-4.2" y2="-2.8" width="0.254" layer="21"/>
+<wire x1="-4.2" y1="-2.8" x2="-4.2" y2="-4.72" width="0.254" layer="51"/>
+<wire x1="-4.2" y1="-4.72" x2="3.44" y2="-4.72" width="0.254" layer="51"/>
+<wire x1="3.44" y1="-4.72" x2="3.44" y2="-2.8" width="0.254" layer="51"/>
+<wire x1="3.44" y1="7.88" x2="-4.2" y2="7.88" width="0.254" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="1"/>
+<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="16"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="16"/>
+<wire x1="2.54" y1="0" x2="2.54" y2="5.08" width="0.254" layer="1"/>
+<wire x1="-4.2" y1="-2.8" x2="3.44" y2="-2.8" width="0.254" layer="21"/>
+<wire x1="3.44" y1="4" x2="3.44" y2="1" width="0.254" layer="21"/>
+<wire x1="3.44" y1="7.88" x2="3.44" y2="6" width="0.254" layer="21"/>
+<wire x1="3.44" y1="-0.9" x2="3.44" y2="-2.8" width="0.254" layer="21"/>
+<pad name="1" x="0" y="0" drill="1.1" diameter="1.9"/>
+<pad name="2" x="2.54" y="0" drill="1.1" diameter="1.9"/>
+<pad name="P$2" x="0" y="5.08" drill="1.1" diameter="1.9"/>
+<pad name="P$3" x="2.54" y="5.08" drill="1.1" diameter="1.9"/>
+</package>
+<package name="BORKEDLABS-PASSIVES_0402-CAP">
+<description><b>CAPACITOR</b><p>
+chip</description>
+<wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
+<wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
+<wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
+<wire x1="0" y1="0.0305" x2="0" y2="-0.0305" width="0.4064" layer="21"/>
+<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
+<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<text x="-0.889" y="0.6985" size="1.016" layer="25">>NAME</text>
+<text x="-1.0795" y="-2.413" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_0402-RES">
+<description><b>CAPACITOR</b><p>
+chip</description>
+<wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
+<wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
+<wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
+<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
+<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<rectangle x1="-0.2032" y1="-0.3556" x2="0.2032" y2="0.3556" layer="21"/>
+<smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
+<text x="-0.889" y="0.6985" size="1.016" layer="25">>NAME</text>
+<text x="-1.0795" y="-1.778" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_0603-CAP">
+<wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="-0.356" y1="0.332" x2="0.356" y2="0.332" width="0.1016" layer="51"/>
+<wire x1="-0.356" y1="-0.319" x2="0.356" y2="-0.319" width="0.1016" layer="51"/>
+<rectangle x1="-0.8382" y1="-0.4" x2="-0.3381" y2="0.4" layer="51"/>
+<rectangle x1="0.3302" y1="-0.4" x2="0.8303" y2="0.4" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<smd name="1" x="-0.8" y="0" dx="0.96" dy="0.8" layer="1"/>
+<smd name="2" x="0.8" y="0" dx="0.96" dy="0.8" layer="1"/>
+<text x="-0.889" y="1.397" size="1.016" layer="25">>NAME</text>
+<text x="-1.016" y="-2.413" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_0603-RES">
+<wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
+<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
+<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
+<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/>
+<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<text x="-0.889" y="1.397" size="1.016" layer="25">>NAME</text>
+<text x="-1.016" y="-2.413" size="1.016" layer="27" ratio="10">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_0805">
+<smd name="1" x="-0.95" y="0" dx="0.7" dy="1.2" layer="1"/>
+<smd name="2" x="0.95" y="0" dx="0.7" dy="1.2" layer="1"/>
+<text x="-0.762" y="0.8255" size="1.016" layer="25">>NAME</text>
+<text x="-1.016" y="-2.032" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_1206">
+<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
+<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
+<wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
+<wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
+<rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
+<rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
+<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
+<smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
+<smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
+<text x="-1.27" y="1.143" size="1.016" layer="25">>NAME</text>
+<text x="-1.397" y="-2.794" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_1210">
+<wire x1="-1.6" y1="1.3" x2="1.6" y2="1.3" width="0.127" layer="51"/>
+<wire x1="1.6" y1="1.3" x2="1.6" y2="-1.3" width="0.127" layer="51"/>
+<wire x1="1.6" y1="-1.3" x2="-1.6" y2="-1.3" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="-1.3" x2="-1.6" y2="1.3" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="1.3" x2="1.6" y2="1.3" width="0.2032" layer="21"/>
+<wire x1="-1.6" y1="-1.3" x2="1.6" y2="-1.3" width="0.2032" layer="21"/>
+<smd name="1" x="-1.6" y="0" dx="1.2" dy="2" layer="1"/>
+<smd name="2" x="1.6" y="0" dx="1.2" dy="2" layer="1"/>
+<text x="-2.07" y="1.77" size="1.016" layer="25">>NAME</text>
+<text x="-2.17" y="-3.24" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_R2010">
+<description><b>RESISTOR</b><p>
+chip</description>
+<wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
+<wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
+<wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
+<wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
+<wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
+<wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
+<wire x1="-1.027" y1="1.245" x2="1.027" y2="1.245" width="0.1524" layer="21"/>
+<wire x1="-1.002" y1="-1.245" x2="1.016" y2="-1.245" width="0.1524" layer="21"/>
+<rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
+<rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
+<smd name="1" x="-2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
+<smd name="2" x="2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
+<text x="-2.54" y="1.5875" size="1.016" layer="25">>NAME</text>
+<text x="-2.54" y="-3.302" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_R2512">
+<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
+<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
+<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
+<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
+<smd name="1" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
+<smd name="2" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
+<text x="-2.54" y="1.905" size="1.016" layer="25">>NAME</text>
+<text x="-2.54" y="-3.175" size="1.016" layer="27">>VALUE</text>
+</package>
+<package name="BORKEDLABS-PASSIVES_TO220ACS">
+<description><B>DIODE</B><p>
+2-lead molded, vertical</description>
+<circle x="-4.4958" y="-3.7084" radius="0.254" width="0" layer="21"/>
+<wire x1="5.08" y1="-1.143" x2="4.953" y2="-4.064" width="0.1524" layer="21"/>
+<wire x1="4.699" y1="-4.318" x2="4.953" y2="-4.064" width="0.1524" layer="21"/>
+<wire x1="4.699" y1="-4.318" x2="-4.699" y2="-4.318" width="0.1524" layer="21"/>
+<wire x1="-4.953" y1="-4.064" x2="-4.699" y2="-4.318" width="0.1524" layer="21"/>
+<wire x1="-4.953" y1="-4.064" x2="-5.08" y2="-1.143" width="0.1524" layer="21"/>
+<rectangle x1="-5.334" y1="-0.762" x2="5.334" y2="0" layer="21"/>
+<rectangle x1="-5.334" y1="-1.27" x2="-3.429" y2="-0.762" layer="21"/>
+<rectangle x1="-3.429" y1="-1.27" x2="-1.651" y2="-0.762" layer="51"/>
+<rectangle x1="3.429" y1="-1.27" x2="5.334" y2="-0.762" layer="21"/>
+<rectangle x1="1.651" y1="-1.27" x2="3.429" y2="-0.762" layer="51"/>
+<rectangle x1="-1.651" y1="-1.27" x2="1.651" y2="-0.762" layer="21"/>
+<pad name="A" x="2.54" y="-2.54" drill="1.016" shape="long" rot="R90"/>
+<pad name="C" x="-2.54" y="-2.54" drill="1.016" shape="long" rot="R90"/>
+<text x="-5.08" y="-6.0452" size="1.016" layer="25" ratio="10">>NAME</text>
+<text x="-5.08" y="-7.62" size="1.016" layer="27" ratio="10">>VALUE</text>
+</package>
+<package name="COMM_TSSOP16">
+<description><b>TSOP16</b><p>
+thin small outline package</description>
+<wire x1="3.1" y1="-2.4" x2="-3" y2="-2.4" width="0.2032" layer="51"/>
+<wire x1="-3" y1="2.6" x2="3.1" y2="2.6" width="0.2032" layer="51"/>
+<wire x1="3.1" y1="-2.4" x2="3.1" y2="2.6" width="0.2032" layer="51"/>
+<wire x1="-3" y1="2.6" x2="-2.8" y2="2.6" width="0.2032" layer="21"/>
+<wire x1="-3" y1="2.6" x2="-3" y2="0.5" width="0.2032" layer="21"/>
+<wire x1="-3" y1="-0.5" x2="-3" y2="-2.4" width="0.2032" layer="21"/>
+<wire x1="-3" y1="-2.4" x2="-2.8" y2="-2.4" width="0.2032" layer="21"/>
+<wire x1="2.9" y1="-2.4" x2="3.1" y2="-2.4" width="0.2032" layer="21"/>
+<wire x1="3.1" y1="-2.4" x2="3.1" y2="2.6" width="0.2032" layer="21"/>
+<wire x1="3.1" y1="2.6" x2="2.9" y2="2.6" width="0.2032" layer="21"/>
+<wire x1="-3" y1="0.5" x2="-3" y2="-0.5" width="0.2032" layer="21" curve="-180"/>
+<rectangle x1="-2.425" y1="-3.3501" x2="-2.0249" y2="-2.5299" layer="51"/>
+<rectangle x1="-1.775" y1="-3.3501" x2="-1.3749" y2="-2.5299" layer="51"/>
+<rectangle x1="-1.125" y1="-3.3501" x2="-0.725" y2="-2.5299" layer="51"/>
+<rectangle x1="-0.475" y1="-3.3501" x2="-0.075" y2="-2.5299" layer="51"/>
+<rectangle x1="0.175" y1="-3.3501" x2="0.575" y2="-2.5299" layer="51"/>
+<rectangle x1="0.825" y1="-3.3501" x2="1.225" y2="-2.5299" layer="51"/>
+<rectangle x1="1.4749" y1="-3.3501" x2="1.875" y2="-2.5299" layer="51"/>
+<rectangle x1="2.1249" y1="-3.3501" x2="2.525" y2="-2.5299" layer="51"/>
+<rectangle x1="2.1249" y1="2.7299" x2="2.525" y2="3.5501" layer="51"/>
+<rectangle x1="1.4749" y1="2.7299" x2="1.875" y2="3.5501" layer="51"/>
+<rectangle x1="0.825" y1="2.7299" x2="1.225" y2="3.5501" layer="51"/>
+<rectangle x1="0.175" y1="2.7299" x2="0.575" y2="3.5501" layer="51"/>
+<rectangle x1="-0.475" y1="2.7299" x2="-0.075" y2="3.5501" layer="51"/>
+<rectangle x1="-1.125" y1="2.7299" x2="-0.725" y2="3.5501" layer="51"/>
+<rectangle x1="-1.775" y1="2.7299" x2="-1.3749" y2="3.5501" layer="51"/>
+<rectangle x1="-2.425" y1="2.7299" x2="-2.0249" y2="3.5501" layer="51"/>
+<rectangle x1="-2.425" y1="-3.3501" x2="-2.0249" y2="-2.5299" layer="51"/>
+<rectangle x1="-1.775" y1="-3.3501" x2="-1.3749" y2="-2.5299" layer="51"/>
+<rectangle x1="-1.125" y1="-3.3501" x2="-0.725" y2="-2.5299" layer="51"/>
+<rectangle x1="-0.475" y1="-3.3501" x2="-0.075" y2="-2.5299" layer="51"/>
+<rectangle x1="0.175" y1="-3.3501" x2="0.575" y2="-2.5299" layer="51"/>
+<rectangle x1="0.825" y1="-3.3501" x2="1.225" y2="-2.5299" layer="51"/>
+<rectangle x1="1.4749" y1="-3.3501" x2="1.875" y2="-2.5299" layer="51"/>
+<rectangle x1="2.1249" y1="-3.3501" x2="2.525" y2="-2.5299" layer="51"/>
+<rectangle x1="2.1249" y1="2.7299" x2="2.525" y2="3.5501" layer="51"/>
+<rectangle x1="1.4749" y1="2.7299" x2="1.875" y2="3.5501" layer="51"/>
+<rectangle x1="0.825" y1="2.7299" x2="1.225" y2="3.5501" layer="51"/>
+<rectangle x1="0.175" y1="2.7299" x2="0.575" y2="3.5501" layer="51"/>
+<rectangle x1="-0.475" y1="2.7299" x2="-0.075" y2="3.5501" layer="51"/>
+<rectangle x1="-1.125" y1="2.7299" x2="-0.725" y2="3.5501" layer="51"/>
+<rectangle x1="-1.775" y1="2.7299" x2="-1.3749" y2="3.5501" layer="51"/>
+<rectangle x1="-2.425" y1="2.7299" x2="-2.0249" y2="3.5501" layer="51"/>
+<smd name="1" x="-2.225" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="2" x="-1.575" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="3" x="-0.925" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="4" x="-0.275" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="5" x="0.375" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="6" x="1.025" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="7" x="1.675" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="8" x="2.325" y="-2.85" dx="0.4" dy="1.6" layer="1"/>
+<smd name="9" x="2.325" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="10" x="1.675" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="11" x="1.025" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="12" x="0.375" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="13" x="-0.275" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="14" x="-0.925" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="15" x="-1.575" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<smd name="16" x="-2.225" y="3.05" dx="0.4" dy="1.6" layer="1"/>
+<text x="-3.33375" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">>NAME</text>
+<text x="3.96875" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="bottom-center">>VALUE</text>
+<polygon width="0.127" layer="21">
+<vertex x="-3.65125" y="-3.175" curve="-90"/>
+<vertex x="-3.175" y="-2.69875" curve="-90"/>
+<vertex x="-2.69875" y="-3.175" curve="-90"/>
+<vertex x="-3.175" y="-3.65125" curve="-90"/>
+</polygon>
+</package>
+<package name="CONNECTOR_FIDUCIAL_1MM">
+<circle x="0" y="0" radius="0.4953" width="0" layer="51"/>
+<smd name="1" x="0" y="0" dx="1" dy="1" layer="1" roundness="100" stop="no" cream="no"/>
+<polygon width="0.127" layer="29">
+<vertex x="-1" y="0" curve="90"/>
+<vertex x="0" y="-1" curve="90"/>
+<vertex x="1" y="0" curve="90"/>
+<vertex x="0" y="1" curve="90"/>
+</polygon>
+<polygon width="0.127" layer="41">
+<vertex x="-1" y="0" curve="90"/>
+<vertex x="0" y="-1" curve="90"/>
+<vertex x="1" y="0" curve="90"/>
+<vertex x="0" y="1" curve="90"/>
+</polygon>
+</package>
+<package name="CONNECTOR_JRTOMBSTONE">
+<wire x1="-1.1" y1="-1" x2="-1.1" y2="0.7" width="0.127" layer="21"/>
+<wire x1="-1.1" y1="0.7" x2="1" y2="0.7" width="0.127" layer="21" curve="-180"/>
+<wire x1="1" y1="0.7" x2="1" y2="-1" width="0.127" layer="21"/>
+<wire x1="1" y1="-1" x2="-1.1" y2="-1" width="0.127" layer="21"/>
+<wire x1="-0.8" y1="-0.5" x2="-0.6" y2="-0.5" width="0.127" layer="21"/>
+<wire x1="-0.6" y1="-0.5" x2="-0.3" y2="-0.2" width="0.127" layer="21" curve="90"/>
+<wire x1="-0.3" y1="-0.2" x2="-0.3" y2="0.7" width="0.127" layer="21"/>
+<wire x1="-0.3" y1="0.7" x2="-0.8" y2="0.7" width="0.127" layer="21"/>
+<wire x1="-0.3" y1="0.7" x2="0.1" y2="0.7" width="0.127" layer="21"/>
+<wire x1="0.1" y1="0.7" x2="0.1" y2="0.1" width="0.127" layer="21"/>
+<wire x1="0.1" y1="0.1" x2="0.1" y2="-0.5" width="0.127" layer="21"/>
+<wire x1="0.1" y1="0.7" x2="0.4" y2="0.7" width="0.127" layer="21"/>
+<wire x1="0.4" y1="0.7" x2="0.4" y2="0.1" width="0.127" layer="21" curve="-180"/>
+<wire x1="0.4" y1="0.1" x2="0.7" y2="-0.5" width="0.127" layer="21"/>
+<wire x1="0.4" y1="0.1" x2="0.1" y2="0.1" width="0.127" layer="21"/>
+</package>
+<package name="CONNECTOR_RJ45-LED-RJE7318800XXX">
+<wire x1="8" y1="-6.5" x2="-8" y2="-6.5" width="0.1524" layer="51"/>
+<wire x1="-8" y1="-6.5" x2="-8" y2="-9" width="0.1524" layer="51"/>
+<wire x1="-8" y1="-9" x2="8" y2="-9" width="0.1524" layer="51"/>
+<wire x1="8" y1="-9" x2="8" y2="6" width="0.1524" layer="51"/>
+<wire x1="8" y1="6" x2="-8" y2="6" width="0.1524" layer="51"/>
+<wire x1="-8" y1="6" x2="-8" y2="-6.5" width="0.1524" layer="51"/>
+<pad name="GRNN" x="7.01" y="3.6" drill="1.1"/>
+<pad name="GRNP" x="4.47" y="3.6" drill="1.1"/>
+<pad name="P$1" x="-3.57" y="0.38" drill="0.9"/>
+<pad name="P$2" x="-2.55" y="-1.45" drill="0.9"/>
+<pad name="P$3" x="-1.53" y="0.38" drill="0.9"/>
+<pad name="P$4" x="-0.51" y="-1.45" drill="0.9"/>
+<pad name="P$5" x="0.51" y="0.38" drill="0.9"/>
+<pad name="P$6" x="1.53" y="-1.45" drill="0.9"/>
+<pad name="P$7" x="2.55" y="0.38" drill="0.9"/>
+<pad name="P$8" x="3.57" y="-1.45" drill="0.9"/>
+<pad name="SHDL1" x="-8" y="-4.35" drill="2" shape="square" rot="R180"/>
+<pad name="SHDL2" x="8" y="-4.35" drill="2" shape="square"/>
+<pad name="YLWN" x="-4.47" y="3.6" drill="1.1"/>
+<pad name="YLWP" x="-7.01" y="3.6" drill="1.1"/>
+<hole x="-5.74" y="0" drill="1.8"/>
+<hole x="5.74" y="0" drill="1.8"/>
+</package>
+<package name="FAB_TACT-SWITCH-KMR6">
+<wire x1="-1.4" y1="0.8" x2="0" y2="0.8" width="0.127" layer="51"/>
+<wire x1="0" y1="0.8" x2="1.4" y2="0.8" width="0.127" layer="51"/>
+<wire x1="-1.4" y1="-0.8" x2="0" y2="-0.8" width="0.127" layer="51"/>
+<wire x1="0" y1="-0.8" x2="1.4" y2="-0.8" width="0.127" layer="51"/>
+<wire x1="0" y1="0.8" x2="0" y2="0.6" width="0.127" layer="51"/>
+<wire x1="0" y1="0.6" x2="0.4" y2="-0.4" width="0.127" layer="51"/>
+<wire x1="0" y1="-0.8" x2="0" y2="-0.5" width="0.127" layer="51"/>
+<wire x1="-2.1" y1="0.2" x2="-2.1" y2="-0.2" width="0.127" layer="51"/>
+<wire x1="2.1" y1="-0.2" x2="2.1" y2="0.2" width="0.127" layer="51"/>
+<wire x1="2.1" y1="1.4" x2="2.1" y2="1.5" width="0.127" layer="51"/>
+<wire x1="2.1" y1="1.5" x2="1" y2="1.5" width="0.127" layer="51"/>
+<wire x1="-1" y1="1.5" x2="-2.1" y2="1.5" width="0.127" layer="51"/>
+<wire x1="-2.1" y1="1.5" x2="-2.1" y2="1.4" width="0.127" layer="51"/>
+<wire x1="-2.1" y1="-1.4" x2="-2.1" y2="-1.5" width="0.127" layer="51"/>
+<wire x1="-2.1" y1="-1.5" x2="2.1" y2="-1.5" width="0.127" layer="51"/>
+<wire x1="2.1" y1="-1.5" x2="2.1" y2="-1.4" width="0.127" layer="51"/>
+<smd name="P$1" x="-2.05" y="0.8" dx="0.9" dy="1" layer="1" rot="R180"/>
+<smd name="P$2" x="2.05" y="0.8" dx="0.9" dy="1" layer="1" rot="R180"/>
+<smd name="P$3" x="-2.05" y="-0.8" dx="0.9" dy="1" layer="1" rot="R180"/>
+<smd name="P$4" x="2.05" y="-0.8" dx="0.9" dy="1" layer="1" rot="R180"/>
+<smd name="P$5" x="0" y="1.5" dx="1.7" dy="0.55" layer="1" rot="R180"/>
+</package>
+<package name="LIGHTS_5MM">
+<description>5mm round through hole part.</description>
+<circle x="0" y="0" radius="2.54" width="0.1524" layer="21"/>
+<wire x1="2.54" y1="-1.905" x2="2.54" y2="1.905" width="0.2032" layer="21"/>
+<wire x1="2.54" y1="-1.905" x2="2.54" y2="1.905" width="0.254" layer="21" curve="-286.260205" cap="flat"/>
+<wire x1="-1.143" y1="0" x2="0" y2="1.143" width="0.1524" layer="51" curve="-90" cap="flat"/>
+<wire x1="0" y1="-1.143" x2="1.143" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
+<wire x1="-1.651" y1="0" x2="0" y2="1.651" width="0.1524" layer="51" curve="-90" cap="flat"/>
+<wire x1="0" y1="-1.651" x2="1.651" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
+<wire x1="-2.159" y1="0" x2="0" y2="2.159" width="0.1524" layer="51" curve="-90" cap="flat"/>
+<wire x1="0" y1="-2.159" x2="2.159" y2="0" width="0.1524" layer="51" curve="90" cap="flat"/>
+<pad name="IN" x="-1.27" y="0" drill="0.8128" diameter="1.4224"/>
+<pad name="OUT" x="1.27" y="0" drill="0.8128" diameter="1.4224"/>
+<text x="3.175" y="0.5334" size="1.27" layer="25" ratio="10">>NAME</text>
+<text x="3.2004" y="-1.8034" size="1.27" layer="27" ratio="10">>VALUE</text>
+</package>
+<package name="LIGHTS_LED0805">
+<wire x1="-0.1778" y1="0.4318" x2="0.1778" y2="0" width="0.127" layer="21"/>
+<wire x1="0.1778" y1="0" x2="-0.1778" y2="-0.4318" width="0.127" layer="21"/>
+<wire x1="-0.1778" y1="0.4318" x2="-0.1778" y2="-0.4318" width="0.127" layer="21"/>
+<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
+<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
+<text x="-0.889" y="1.397" size="1.016" layer="25">>NAME</text>
+<text x="-1.016" y="-2.413" size="1.016" layer="27" ratio="10">>VALUE</text>
+</package>
+<package name="LIGHTS_LED1206">
+<description>LED 1206 pads (standard pattern)</description>
+<wire x1="0.9525" y1="-0.8128" x2="-0.9652" y2="-0.8128" width="0.1524" layer="51"/>
+<wire x1="0.9525" y1="0.8128" x2="-0.9652" y2="0.8128" width="0.1524" layer="51"/>
+<rectangle x1="-1.6891" y1="-0.8763" x2="-0.9525" y2="0.8763" layer="51"/>
+<rectangle x1="0.9525" y1="-0.8763" x2="1.6891" y2="0.8763" layer="51"/>
+<smd name="1" x="-1.422" y="0" dx="1.6" dy="1.803" layer="1"/>
+<smd name="2" x="1.422" y="0" dx="1.6" dy="1.803" layer="1"/>
+<text x="-1.27" y="1.27" size="1.27" layer="25">>NAME</text>
+<text x="-1.27" y="-2.54" size="1.27" layer="27">>VALUE</text>
+</package>
+<package name="LIGHTS_LED1206FAB">
+<description>LED1206 FAB style (smaller pads to allow trace between)</description>
+<wire x1="-2.032" y1="1.016" x2="2.032" y2="1.016" width="0.127" layer="21"/>
+<wire x1="2.032" y1="1.016" x2="2.032" y2="-1.016" width="0.127" layer="21"/>
+<wire x1="2.032" y1="-1.016" x2="-2.032" y2="-1.016" width="0.127" layer="21"/>
+<wire x1="-2.032" y1="-1.016" x2="-2.032" y2="1.016" width="0.127" layer="21"/>
+<smd name="1" x="-1.651" y="0" dx="1.27" dy="1.905" layer="1"/>
+<smd name="2" x="1.651" y="0" dx="1.27" dy="1.905" layer="1"/>
+<text x="-1.778" y="1.27" size="1.016" layer="25" ratio="15">>NAME</text>
+<text x="-1.778" y="-2.286" size="1.016" layer="27" ratio="15">>VALUE</text>
+</package>
+<package name="MICROCONTROLLERS_PDI_2X3_SMD">
+<description><h3>Surface Mount - 2x3</h3>
+<p>Specifications:
+<ul><li>Pin count:6</li>
+<li>Pin pitch:2.54mm</li>
+</ul></p>
+<p>Example device(s):
+<ul><li>CONN_03x2</li>
+</ul></p></description>
+<wire x1="-3.81" y1="-2.5" x2="-3.81" y2="2.5" width="0.127" layer="51"/>
+<wire x1="-3.81" y1="2.5" x2="3.81" y2="2.5" width="0.127" layer="51"/>
+<wire x1="3.81" y1="2.5" x2="3.81" y2="-2.5" width="0.127" layer="51"/>
+<wire x1="3.81" y1="-2.5" x2="-3.81" y2="-2.5" width="0.127" layer="51"/>
+<wire x1="-1.27" y1="-4.38" x2="1.27" y2="-4.38" width="0.2032" layer="21"/>
+<rectangle x1="-0.3" y1="2.55" x2="0.3" y2="3.35" layer="51"/>
+<rectangle x1="-2.84" y1="2.55" x2="-2.24" y2="3.35" layer="51"/>
+<rectangle x1="2.24" y1="2.55" x2="2.84" y2="3.35" layer="51"/>
+<rectangle x1="-2.84" y1="-3.35" x2="-2.24" y2="-2.55" layer="51" rot="R180"/>
+<rectangle x1="-0.3" y1="-3.35" x2="0.3" y2="-2.55" layer="51" rot="R180"/>
+<rectangle x1="2.24" y1="-3.35" x2="2.84" y2="-2.55" layer="51" rot="R180"/>
+<smd name="1" x="-2.54" y="-2.85" dx="1.02" dy="1.9" layer="1"/>
+<smd name="2" x="-2.54" y="2.85" dx="1.02" dy="1.9" layer="1"/>
+<smd name="3" x="0" y="-2.85" dx="1.02" dy="1.9" layer="1"/>
+<smd name="4" x="0" y="2.85" dx="1.02" dy="1.9" layer="1"/>
+<smd name="5" x="2.54" y="-2.85" dx="1.02" dy="1.9" layer="1"/>
+<smd name="6" x="2.54" y="2.85" dx="1.02" dy="1.9" layer="1"/>
+<text x="-1.397" y="0.381" size="0.6096" layer="25" font="vector" ratio="20">>NAME</text>
+<text x="-1.778" y="-1.016" size="0.6096" layer="27" font="vector" ratio="20">>VALUE</text>
+</package>
+<package name="MICROCONTROLLERS_QFN-64-9X9MM">
+<description><h3>64-pin QFN 9x9mm, 0.5mm pitch</h3>
+<p>Package used by ATmega128RFA1</p>
+<p><a href="http://www.atmel.com/Images/Atmel-8266-MCU_Wireless-ATmega128RFA1_Datasheet.pdf">Example Datasheet</a></p></description>
+<circle x="-4.842" y="4.85" radius="0.2" width="0" layer="21"/>
+<circle x="-3.442" y="3.45" radius="0.2" width="0.09" layer="51"/>
+<wire x1="-4.492" y1="-4.5" x2="4.508" y2="-4.5" width="0.09" layer="51"/>
+<wire x1="4.508" y1="-4.5" x2="4.508" y2="4.5" width="0.09" layer="51"/>
+<wire x1="4.508" y1="4.5" x2="-4.492" y2="4.5" width="0.09" layer="51"/>
+<wire x1="-4.492" y1="4.5" x2="-4.492" y2="-4.5" width="0.09" layer="51"/>
+<wire x1="-4.6" y1="4.6" x2="-4.6" y2="4.1" width="0.2032" layer="21"/>
+<wire x1="-4.6" y1="4.6" x2="-4.1" y2="4.6" width="0.2032" layer="21"/>
+<wire x1="4.6" y1="4.6" x2="4.1" y2="4.6" width="0.2032" layer="21"/>
+<wire x1="4.6" y1="4.6" x2="4.6" y2="4.1" width="0.2032" layer="21"/>
+<wire x1="4.6" y1="-4.6" x2="4.1" y2="-4.6" width="0.2032" layer="21"/>
+<wire x1="4.6" y1="-4.6" x2="4.6" y2="-4.1" width="0.2032" layer="21"/>
+<wire x1="-4.6" y1="-4.6" x2="-4.6" y2="-4.1" width="0.2032" layer="21"/>
+<wire x1="-4.6" y1="-4.6" x2="-4.1" y2="-4.6" width="0.2032" layer="21"/>
+<smd name="1" x="-4.5" y="3.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="2" x="-4.5" y="3.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="3" x="-4.5" y="2.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="4" x="-4.5" y="2.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="5" x="-4.5" y="1.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="6" x="-4.5" y="1.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="7" x="-4.5" y="0.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="8" x="-4.5" y="0.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="9" x="-4.5" y="-0.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="10" x="-4.5" y="-0.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="11" x="-4.5" y="-1.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="12" x="-4.5" y="-1.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="13" x="-4.5" y="-2.25" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="14" x="-4.5" y="-2.75" dx="0.275" dy="0.7" layer="1" rot="R270"/>
+<smd name="15" x="-4.5" y="-3.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="16" x="-4.5" y="-3.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="17" x="-3.75" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="18" x="-3.25" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="19" x="-2.75" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="20" x="-2.25" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="21" x="-1.75" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="22" x="-1.25" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="23" x="-0.75" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="24" x="-0.25" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="25" x="0.25" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="26" x="0.75" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="27" x="1.25" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="28" x="1.75" y="-4.5" dx="0.275" dy="0.7" layer="1" rot="R180"/>
+<smd name="29" x="2.25" y="-4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="30" x="2.75" y="-4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="31" x="3.25" y="-4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="32" x="3.75" y="-4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="33" x="4.5" y="-3.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="34" x="4.5" y="-3.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="35" x="4.5" y="-2.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="36" x="4.5" y="-2.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="37" x="4.5" y="-1.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="38" x="4.5" y="-1.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="39" x="4.5" y="-0.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="40" x="4.5" y="-0.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="41" x="4.5" y="0.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="42" x="4.5" y="0.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="43" x="4.5" y="1.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="44" x="4.5" y="1.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="45" x="4.5" y="2.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="46" x="4.5" y="2.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="47" x="4.5" y="3.25" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="48" x="4.5" y="3.75" dx="0.275" dy="0.7" layer="1" rot="R90"/>
+<smd name="49" x="3.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="50" x="3.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="51" x="2.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="52" x="2.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="53" x="1.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="54" x="1.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="55" x="0.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="56" x="0.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="57" x="-0.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="58" x="-0.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="59" x="-1.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="60" x="-1.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="61" x="-2.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="62" x="-2.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="63" x="-3.25" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="64" x="-3.75" y="4.5" dx="0.275" dy="0.7" layer="1"/>
+<smd name="P$1" x="0" y="0" dx="7.6" dy="7.6" layer="1" cream="no"/>
+<text x="0" y="1.27" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">>NAME</text>
+<text x="0" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">>VALUE</text>
+<polygon width="0.127" layer="31">
+<vertex x="2.13" y="2.13"/>
+<vertex x="2.13" y="3.27"/>
+<vertex x="3.27" y="3.27"/>
+<vertex x="3.27" y="2.13"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-3.27" y="2.13"/>
+<vertex x="-3.27" y="3.27"/>
+<vertex x="-2.13" y="3.27"/>
+<vertex x="-2.13" y="2.13"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-3.27" y="-3.27"/>
+<vertex x="-3.27" y="-2.13"/>
+<vertex x="-2.13" y="-2.13"/>
+<vertex x="-2.13" y="-3.27"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="2.13" y="-3.27"/>
+<vertex x="2.13" y="-2.13"/>
+<vertex x="3.27" y="-2.13"/>
+<vertex x="3.27" y="-3.27"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-0.57" y="-0.57"/>
+<vertex x="-0.57" y="0.57"/>
+<vertex x="0.57" y="0.57"/>
+<vertex x="0.57" y="-0.57"/>
+</polygon>
+</package>
+<package name="MICROCONTROLLERS_TQFP64_14X14MM-013THIN">
+<description>64-Lead TQFP Plastic Thin Quad Flatpack - 14x14x1mm Body</description>
+<circle x="-7.62" y="-7.62" radius="0.254" width="0.127" layer="21"/>
+<wire x1="7" y1="7" x2="-7" y2="7" width="0.127" layer="51"/>
+<wire x1="-7" y1="7" x2="-7" y2="-7" width="0.127" layer="51"/>
+<wire x1="-7" y1="-7" x2="7" y2="-7" width="0.127" layer="51"/>
+<wire x1="7" y1="-7" x2="7" y2="7" width="0.127" layer="51"/>
+<wire x1="-7.1" y1="6.4" x2="-7.1" y2="7.1" width="0.127" layer="21"/>
+<wire x1="-7.1" y1="7.1" x2="-6.4" y2="7.1" width="0.127" layer="21"/>
+<wire x1="6.4" y1="7.1" x2="7.1" y2="7.1" width="0.127" layer="21"/>
+<wire x1="7.1" y1="7.1" x2="7.1" y2="6.4" width="0.127" layer="21"/>
+<wire x1="7.1" y1="-6.4" x2="7.1" y2="-7.1" width="0.127" layer="21"/>
+<wire x1="7.1" y1="-7.1" x2="6.4" y2="-7.1" width="0.127" layer="21"/>
+<wire x1="-7" y1="-6.4" x2="-6.4" y2="-7" width="0.127" layer="21"/>
+<smd name="1" x="-6" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="2" x="-5.2" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="3" x="-4.4" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="4" x="-3.6" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="5" x="-2.8" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="6" x="-2" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="7" x="-1.2" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="8" x="-0.4" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="9" x="0.4" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="10" x="1.2" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="11" x="2" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="12" x="2.8" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="13" x="3.6" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="14" x="4.4" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="15" x="5.2" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="16" x="6" y="-7.6" dx="1.524" dy="0.3302" layer="1" rot="R90"/>
+<smd name="17" x="7.6" y="-6" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="18" x="7.6" y="-5.2" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="19" x="7.6" y="-4.4" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="20" x="7.6" y="-3.6" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="21" x="7.6" y="-2.8" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="22" x="7.6" y="-2" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="23" x="7.6" y="-1.2" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="24" x="7.6" y="-0.4" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="25" x="7.6" y="0.4" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="26" x="7.6" y="1.2" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="27" x="7.6" y="2" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="28" x="7.6" y="2.8" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="29" x="7.6" y="3.6" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="30" x="7.6" y="4.4" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="31" x="7.6" y="5.2" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="32" x="7.6" y="6" dx="1.524" dy="0.3302" layer="1" rot="R180"/>
+<smd name="33" x="6" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="34" x="5.2" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="35" x="4.4" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="36" x="3.6" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="37" x="2.8" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="38" x="2" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="39" x="1.2" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="40" x="0.4" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="41" x="-0.4" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="42" x="-1.2" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="43" x="-2" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="44" x="-2.8" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="45" x="-3.6" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="46" x="-4.4" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="47" x="-5.2" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="48" x="-6" y="7.6" dx="1.524" dy="0.3302" layer="1" rot="R270"/>
+<smd name="49" x="-7.6" y="6" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="50" x="-7.6" y="5.2" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="51" x="-7.6" y="4.4" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="52" x="-7.6" y="3.6" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="53" x="-7.6" y="2.8" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="54" x="-7.6" y="2" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="55" x="-7.6" y="1.2" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="56" x="-7.6" y="0.4" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="57" x="-7.6" y="-0.4" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="58" x="-7.6" y="-1.2" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="59" x="-7.6" y="-2" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="60" x="-7.6" y="-2.8" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="61" x="-7.6" y="-3.6" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="62" x="-7.6" y="-4.4" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="63" x="-7.6" y="-5.2" dx="1.524" dy="0.3302" layer="1"/>
+<smd name="64" x="-7.6" y="-6" dx="1.524" dy="0.3302" layer="1"/>
+<text x="-8.89" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">>NAME</text>
+<text x="9.525" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="bottom-center">>VALUE</text>
+</package>
+<package name="PASSIVES_RES_EFOBM">
+<smd name="1" x="-1.35" y="0" dx="3.9" dy="0.8" layer="1" rot="R90"/>
+<smd name="2" x="0" y="0" dx="3.9" dy="0.8" layer="1" rot="R270"/>
+<smd name="3" x="1.35" y="0" dx="3.9" dy="0.8" layer="1" rot="R270"/>
+</package>
+<package name="PASSIVES_RES_PRQC">
+<wire x1="-1.6" y1="0.65" x2="1.6" y2="0.65" width="0.127" layer="51"/>
+<wire x1="1.6" y1="0.65" x2="1.6" y2="-0.65" width="0.127" layer="51"/>
+<wire x1="1.6" y1="-0.65" x2="-1.6" y2="-0.65" width="0.127" layer="51"/>
+<wire x1="-1.6" y1="-0.65" x2="-1.6" y2="0.65" width="0.127" layer="51"/>
+<smd name="1" x="-0.95" y="0" dx="1.5" dy="0.6" layer="1" rot="R90"/>
+<smd name="2" x="0" y="0" dx="1.5" dy="0.4" layer="1" rot="R270"/>
+<smd name="3" x="0.95" y="0" dx="1.5" dy="0.6" layer="1" rot="R270"/>
+</package>
+<package name="POWER_DPAK-5">
+<description>DPAK 5, center lead crop, case 175AA</description>
+<circle x="-2.27" y="-3.5" radius="0.1" width="0.254" layer="21"/>
+<circle x="-1.16" y="-3.5" radius="0.1" width="0.254" layer="21"/>
+<circle x="1.12" y="-3.5" radius="0.1" width="0.254" layer="21"/>
+<circle x="2.23" y="-3.5" radius="0.1" width="0.254" layer="21"/>
+<wire x1="3.26" y1="-3.13" x2="-3.24" y2="-3.13" width="0.127" layer="51"/>
+<wire x1="3.26" y1="-3.13" x2="3.26" y2="2.87" width="0.127" layer="51"/>
+<wire x1="3.26" y1="2.87" x2="-2.21" y2="2.87" width="0.127" layer="51"/>
+<wire x1="-2.21" y1="2.87" x2="-3.24" y2="2.87" width="0.127" layer="51"/>
+<wire x1="-3.24" y1="2.87" x2="-3.24" y2="-3.13" width="0.127" layer="51"/>
+<wire x1="-2.21" y1="2.87" x2="-2.21" y2="3.6" width="0.127" layer="51"/>
+<wire x1="-2.21" y1="3.6" x2="-1.96" y2="3.85" width="0.127" layer="51"/>
+<wire x1="2.29" y1="2.88" x2="2.29" y2="3.6" width="0.127" layer="51"/>
+<wire x1="2.29" y1="3.6" x2="2.04" y2="3.85" width="0.127" layer="51"/>
+<wire x1="2.04" y1="3.85" x2="-1.96" y2="3.85" width="0.127" layer="51"/>
+<wire x1="-3.09" y1="3.03" x2="-3.48" y2="3.03" width="0.127" layer="21"/>
+<wire x1="-3.48" y1="3.03" x2="-3.48" y2="-3.38" width="0.127" layer="21"/>
+<wire x1="-3.48" y1="-3.38" x2="-3" y2="-3.38" width="0.127" layer="21"/>
+<wire x1="-3.48" y1="3.03" x2="-3" y2="3.03" width="0.127" layer="21"/>
+<wire x1="3.07" y1="-3.38" x2="3.46" y2="-3.38" width="0.127" layer="21"/>
+<wire x1="3.46" y1="-3.38" x2="3.46" y2="3.03" width="0.127" layer="21"/>
+<wire x1="3.46" y1="3.03" x2="2.98" y2="3.03" width="0.127" layer="21"/>
+<wire x1="3.46" y1="-3.38" x2="2.98" y2="-3.38" width="0.127" layer="21"/>
+<rectangle x1="-2.62" y1="-5.8" x2="-1.92" y2="-3.1" layer="51"/>
+<rectangle x1="-1.49" y1="-5.8" x2="-0.79" y2="-3.1" layer="51"/>
+<rectangle x1="0.79" y1="-5.79" x2="1.49" y2="-3.09" layer="51"/>
+<rectangle x1="1.92" y1="-5.79" x2="2.62" y2="-3.09" layer="51"/>
+<smd name="1" x="-2.28" y="-5.3" dx="2.2" dy="0.8" layer="1" rot="R90"/>
+<smd name="2" x="-1.14" y="-5.3" dx="2.2" dy="0.8" layer="1" rot="R90"/>
+<smd name="3" x="0" y="1" dx="6.4" dy="5.8" layer="1" rot="R90"/>
+<smd name="4" x="1.14" y="-5.3" dx="2.2" dy="0.8" layer="1" rot="R90"/>
+<smd name="5" x="2.28" y="-5.3" dx="2.2" dy="0.8" layer="1" rot="R90"/>
+<text x="-3" y="4.5" size="0.4064" layer="25">>NAME</text>
+<text x="-3" y="-3" size="0.4064" layer="27">>VALUE</text>
+</package>
+<package name="POWER_POWERFLAT-5X6">
+<circle x="-2.7" y="-3.8" radius="0.22360625" width="0.127" layer="21"/>
+<smd name="P$1" x="-1.905" y="-2.8" dx="0.65" dy="1" layer="1"/>
+<smd name="P$2" x="-0.635" y="-2.8" dx="0.65" dy="1" layer="1"/>
+<smd name="P$3" x="0.635" y="-2.8" dx="0.65" dy="1" layer="1"/>
+<smd name="P$4" x="1.905" y="-2.8" dx="0.65" dy="1" layer="1"/>
+<smd name="P$5" x="1.45" y="0.9" dx="2.5" dy="4.35" layer="1"/>
+<smd name="P$8" x="-1.45" y="0.9" dx="2.5" dy="4.35" layer="1"/>
+</package>
+<package name="POWER_PWRPAD_2-05MM">
+<pad name="P$1" x="0" y="0" drill="2.05" diameter="3.8" thermals="no"/>
+</package>
+<package name="POWER_PWRPAD_2-65MM">
+<pad name="P$1" x="0" y="0" drill="2.65" diameter="4.65" thermals="no"/>
+</package>
+<package name="POWER_PWRPAD_3-25MM">
+<pad name="P$1" x="0" y="0" drill="3.25" diameter="5.75" thermals="no"/>
+</package>
+<package name="POWER_PWRPAD_3-25MM-SKINNY">
+<pad name="P$1" x="0" y="0" drill="3.25" diameter="5.35" thermals="no"/>
+</package>
+<package name="POWER_PWRPAD_4MM">
+<pad name="P$1" x="0" y="0" drill="3.9878" diameter="6.35" thermals="no"/>
+</package>
+<package name="POWER_PWRPAD_M3_STANDOFF">
+<circle x="0" y="0" radius="3.5" width="0.125" layer="51"/>
+<pad name="P$1" x="0" y="0" drill="4.4" diameter="7" thermals="no"/>
+<polygon width="0.127" layer="31">
+<vertex x="-0.6" y="3.6"/>
+<vertex x="0.6" y="3.6"/>
+<vertex x="0.4" y="2.1"/>
+<vertex x="-0.4" y="2.1"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="0.6" y="-3.6"/>
+<vertex x="-0.6" y="-3.6"/>
+<vertex x="-0.4" y="-2.1"/>
+<vertex x="0.4" y="-2.1"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-3.6" y="-0.6"/>
+<vertex x="-3.6" y="0.6"/>
+<vertex x="-2.1" y="0.4"/>
+<vertex x="-2.1" y="-0.4"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="3.6" y="0.6"/>
+<vertex x="3.6" y="-0.6"/>
+<vertex x="2.1" y="-0.4"/>
+<vertex x="2.1" y="0.4"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-2.95269375" y="2.13136875"/>
+<vertex x="-2.104165625" y="2.979896875"/>
+<vertex x="-1.19203125" y="1.784921875"/>
+<vertex x="-1.75771875" y="1.2192375"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="2.99705625" y="-2.12131875"/>
+<vertex x="2.148528125" y="-2.969846875"/>
+<vertex x="1.23639375" y="-1.774871875"/>
+<vertex x="1.80208125" y="-1.2091875"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-2.104165625" y="-2.969846875"/>
+<vertex x="-2.95269375" y="-2.12131875"/>
+<vertex x="-1.75771875" y="-1.2091875"/>
+<vertex x="-1.19203125" y="-1.774871875"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="2.148528125" y="2.979896875"/>
+<vertex x="2.99705625" y="2.13136875"/>
+<vertex x="1.80208125" y="1.2192375"/>
+<vertex x="1.23639375" y="1.784921875"/>
+</polygon>
+</package>
+<package name="POWER_PWRPAD_M25_STANDOFF">
+<pad name="P$1" x="0" y="0" drill="3.7" diameter="6" thermals="no"/>
+<polygon width="0.127" layer="31">
+<vertex x="-0.6" y="3"/>
+<vertex x="0.6" y="3"/>
+<vertex x="0.4" y="1.9"/>
+<vertex x="-0.4" y="1.9"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="0.6" y="-3"/>
+<vertex x="-0.6" y="-3"/>
+<vertex x="-0.4" y="-1.9"/>
+<vertex x="0.4" y="-1.9"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-3" y="-0.6"/>
+<vertex x="-3" y="0.6"/>
+<vertex x="-1.9" y="0.4"/>
+<vertex x="-1.9" y="-0.4"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="3" y="0.5"/>
+<vertex x="3" y="-0.7"/>
+<vertex x="1.9" y="-0.5"/>
+<vertex x="1.9" y="0.3"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-2.55269375" y="1.73136875"/>
+<vertex x="-1.704165625" y="2.579896875"/>
+<vertex x="-0.99203125" y="1.584921875"/>
+<vertex x="-1.55771875" y="1.0192375"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="2.49705625" y="-1.72131875"/>
+<vertex x="1.648528125" y="-2.569846875"/>
+<vertex x="1.03639375" y="-1.574871875"/>
+<vertex x="1.60208125" y="-1.0091875"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="-1.704165625" y="-2.669846875"/>
+<vertex x="-2.55269375" y="-1.82131875"/>
+<vertex x="-1.55771875" y="-1.1091875"/>
+<vertex x="-0.99203125" y="-1.674871875"/>
+</polygon>
+<polygon width="0.127" layer="31">
+<vertex x="1.748528125" y="2.579896875"/>
+<vertex x="2.59705625" y="1.73136875"/>
+<vertex x="1.60208125" y="1.0192375"/>
+<vertex x="1.03639375" y="1.584921875"/>
+</polygon>
+</package>
+<package name="POWER_PWRPAD_SC-02_2-45MM">
+<pad name="P$1" x="0" y="0" drill="2.45" diameter="4.24" thermals="no"/>
+</package>
+<package name="POWER_QFN32">
+<description><b>QFN 32</b> 5 x 5 mm<p>
+Source: http://datasheets.maxim-ic.com/en/ds/MAX7042.pdf</description>
+<circle x="-2.175" y="2.175" radius="0.15" width="0" layer="21"/>
+<wire x1="-2.45" y1="2.45" x2="2.45" y2="2.45" width="0.1016" layer="51"/>
+<wire x1="2.45" y1="2.45" x2="2.45" y2="-2.45" width="0.1016" layer="51"/>
+<wire x1="2.45" y1="-2.45" x2="-2.45" y2="-2.45" width="0.1016" layer="51"/>
+<wire x1="-2.45" y1="-2.45" x2="-2.45" y2="2.45" width="0.1016" layer="51"/>
+<wire x1="-2.45" y1="2.05" x2="-2.45" y2="2.45" width="0.1016" layer="21"/>
+<wire x1="-2.45" y1="2.45" x2="-2.05" y2="2.45" width="0.1016" layer="21"/>
+<wire x1="2.05" y1="2.45" x2="2.45" y2="2.45" width="0.1016" layer="21"/>
+<wire x1="2.45" y1="2.45" x2="2.45" y2="2.05" width="0.1016" layer="21"/>
+<wire x1="2.45" y1="-2.05" x2="2.45" y2="-2.45" width="0.1016" layer="21"/>
+<wire x1="2.45" y1="-2.45" x2="2.05" y2="-2.45" width="0.1016" layer="21"/>
+<wire x1="-2.05" y1="-2.45" x2="-2.45" y2="-2.45" width="0.1016" layer="21"/>
+<wire x1="-2.45" y1="-2.45" x2="-2.45" y2="-2.05" width="0.1016" layer="21"/>
+<rectangle x1="-0.3" y1="1.1" x2="0.3" y2="1.4" layer="31"/>
+<rectangle x1="-0.3" y1="0.6" x2="0.3" y2="0.9" layer="31"/>
+<rectangle x1="-0.3" y1="0.1" x2="0.3" y2="0.4" layer="31"/>
+<rectangle x1="-0.3" y1="-0.4" x2="0.3" y2="-0.1" layer="31"/>
+<rectangle x1="-0.3" y1="-0.9" x2="0.3" y2="-0.6" layer="31"/>
+<rectangle x1="-0.3" y1="-1.4" x2="0.3" y2="-1.1" layer="31"/>
+<rectangle x1="-1.3" y1="1.1" x2="-0.7" y2="1.4" layer="31"/>
+<rectangle x1="-1.3" y1="0.6" x2="-0.7" y2="0.9" layer="31"/>
+<rectangle x1="-1.3" y1="0.1" x2="-0.7" y2="0.4" layer="31"/>
+<rectangle x1="-1.3" y1="-0.4" x2="-0.7" y2="-0.1" layer="31"/>
+<rectangle x1="-1.3" y1="-0.9" x2="-0.7" y2="-0.6" layer="31"/>
+<rectangle x1="-1.3" y1="-1.4" x2="-0.7" y2="-1.1" layer="31"/>
+<rectangle x1="0.7" y1="1.1" x2="1.3" y2="1.4" layer="31"/>
+<rectangle x1="0.7" y1="0.6" x2="1.3" y2="0.9" layer="31"/>
+<rectangle x1="0.7" y1="0.1" x2="1.3" y2="0.4" layer="31"/>
+<rectangle x1="0.7" y1="-0.4" x2="1.3" y2="-0.1" layer="31"/>
+<rectangle x1="0.7" y1="-0.9" x2="1.3" y2="-0.6" layer="31"/>
+<rectangle x1="0.7" y1="-1.4" x2="1.3" y2="-1.1" layer="31"/>
+<rectangle x1="-2.5" y1="0.25" x2="-0.25" y2="2.5" layer="51"/>
+<smd name="1" x="-2.325" y="1.75" dx="0.55" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="2" x="-2.3" y="1.25" dx="0.6" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="3" x="-2.3" y="0.75" dx="0.6" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="4" x="-2.3" y="0.25" dx="0.6" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="5" x="-2.3" y="-0.25" dx="0.6" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="6" x="-2.3" y="-0.75" dx="0.6" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="7" x="-2.3" y="-1.25" dx="0.6" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="8" x="-2.325" y="-1.75" dx="0.55" dy="0.25" layer="1" stop="no" cream="no"/>
+<smd name="9" x="-1.75" y="-2.325" dx="0.55" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="10" x="-1.25" y="-2.3" dx="0.6" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="11" x="-0.75" y="-2.3" dx="0.6" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="12" x="-0.25" y="-2.3" dx="0.6" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="13" x="0.25" y="-2.3" dx="0.6" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="14" x="0.75" y="-2.3" dx="0.6" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="15" x="1.25" y="-2.3" dx="0.6" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="16" x="1.75" y="-2.325" dx="0.55" dy="0.25" layer="1" rot="R90" stop="no" cream="no"/>
+<smd name="17" x="2.325" y="-1.75" dx="0.55" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="18" x="2.3" y="-1.25" dx="0.6" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="19" x="2.3" y="-0.75" dx="0.6" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="20" x="2.3" y="-0.25" dx="0.6" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="21" x="2.3" y="0.25" dx="0.6" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="22" x="2.3" y="0.75" dx="0.6" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="23" x="2.3" y="1.25" dx="0.6" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="24" x="2.325" y="1.75" dx="0.55" dy="0.25" layer="1" rot="R180" stop="no" cream="no"/>
+<smd name="25" x="1.75" y="2.325" dx="0.55" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="26" x="1.25" y="2.3" dx="0.6" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="27" x="0.75" y="2.3" dx="0.6" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="28" x="0.25" y="2.3" dx="0.6" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="29" x="-0.25" y="2.3" dx="0.6" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="30" x="-0.75" y="2.3" dx="0.6" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="31" x="-1.25" y="2.3" dx="0.6" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="32" x="-1.75" y="2.325" dx="0.55" dy="0.25" layer="1" rot="R270" stop="no" cream="no"/>
+<smd name="EXP" x="0" y="0" dx="3.2" dy="3.2" layer="1" stop="no" cream="no"/>
+<text x="-4.05" y="-4.35" size="1.27" layer="27">>VALUE</text>
+<text x="-3.8" y="3.25" size="1.27" layer="25">>NAME</text>
+<polygon width="0.5" layer="29">
+<vertex x="-1.325" y="1.175"/>
+<vertex x="-1.175" y="1.325"/>
+<vertex x="1.325" y="1.325"/>
+<vertex x="1.325" y="-1.325"/>
+<vertex x="-1.325" y="-1.325"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="1.85"/>
+<vertex x="-2.1" y="1.85"/>
+<vertex x="-2.05" y="1.8"/>
+<vertex x="-2.05" y="1.65"/>
+<vertex x="-2.55" y="1.65"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="1.825"/>
+<vertex x="-2.125" y="1.825"/>
+<vertex x="-2.075" y="1.775"/>
+<vertex x="-2.075" y="1.675"/>
+<vertex x="-2.525" y="1.675"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="1.35"/>
+<vertex x="-2.05" y="1.35"/>
+<vertex x="-2.05" y="1.15"/>
+<vertex x="-2.55" y="1.15"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="1.325"/>
+<vertex x="-2.075" y="1.325"/>
+<vertex x="-2.075" y="1.175"/>
+<vertex x="-2.525" y="1.175"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="0.85"/>
+<vertex x="-2.05" y="0.85"/>
+<vertex x="-2.05" y="0.65"/>
+<vertex x="-2.55" y="0.65"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="0.825"/>
+<vertex x="-2.075" y="0.825"/>
+<vertex x="-2.075" y="0.675"/>
+<vertex x="-2.525" y="0.675"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="0.35"/>
+<vertex x="-2.05" y="0.35"/>
+<vertex x="-2.05" y="0.15"/>
+<vertex x="-2.55" y="0.15"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="0.325"/>
+<vertex x="-2.075" y="0.325"/>
+<vertex x="-2.075" y="0.175"/>
+<vertex x="-2.525" y="0.175"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="-0.15"/>
+<vertex x="-2.05" y="-0.15"/>
+<vertex x="-2.05" y="-0.35"/>
+<vertex x="-2.55" y="-0.35"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="-0.175"/>
+<vertex x="-2.075" y="-0.175"/>
+<vertex x="-2.075" y="-0.325"/>
+<vertex x="-2.525" y="-0.325"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="-0.65"/>
+<vertex x="-2.05" y="-0.65"/>
+<vertex x="-2.05" y="-0.85"/>
+<vertex x="-2.55" y="-0.85"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="-0.675"/>
+<vertex x="-2.075" y="-0.675"/>
+<vertex x="-2.075" y="-0.825"/>
+<vertex x="-2.525" y="-0.825"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="-1.15"/>
+<vertex x="-2.05" y="-1.15"/>
+<vertex x="-2.05" y="-1.35"/>
+<vertex x="-2.55" y="-1.35"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="-1.175"/>
+<vertex x="-2.075" y="-1.175"/>
+<vertex x="-2.075" y="-1.325"/>
+<vertex x="-2.525" y="-1.325"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-2.55" y="-1.85"/>
+<vertex x="-2.1" y="-1.85"/>
+<vertex x="-2.05" y="-1.8"/>
+<vertex x="-2.05" y="-1.65"/>
+<vertex x="-2.55" y="-1.65"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-2.525" y="-1.825"/>
+<vertex x="-2.125" y="-1.825"/>
+<vertex x="-2.075" y="-1.775"/>
+<vertex x="-2.075" y="-1.675"/>
+<vertex x="-2.525" y="-1.675"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-1.85" y="-2.55"/>
+<vertex x="-1.85" y="-2.1"/>
+<vertex x="-1.8" y="-2.05"/>
+<vertex x="-1.65" y="-2.05"/>
+<vertex x="-1.65" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-1.825" y="-2.525"/>
+<vertex x="-1.825" y="-2.125"/>
+<vertex x="-1.775" y="-2.075"/>
+<vertex x="-1.675" y="-2.075"/>
+<vertex x="-1.675" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-1.35" y="-2.55"/>
+<vertex x="-1.35" y="-2.05"/>
+<vertex x="-1.15" y="-2.05"/>
+<vertex x="-1.15" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-1.325" y="-2.525"/>
+<vertex x="-1.325" y="-2.075"/>
+<vertex x="-1.175" y="-2.075"/>
+<vertex x="-1.175" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-0.85" y="-2.55"/>
+<vertex x="-0.85" y="-2.05"/>
+<vertex x="-0.65" y="-2.05"/>
+<vertex x="-0.65" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-0.825" y="-2.525"/>
+<vertex x="-0.825" y="-2.075"/>
+<vertex x="-0.675" y="-2.075"/>
+<vertex x="-0.675" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-0.35" y="-2.55"/>
+<vertex x="-0.35" y="-2.05"/>
+<vertex x="-0.15" y="-2.05"/>
+<vertex x="-0.15" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-0.325" y="-2.525"/>
+<vertex x="-0.325" y="-2.075"/>
+<vertex x="-0.175" y="-2.075"/>
+<vertex x="-0.175" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="0.15" y="-2.55"/>
+<vertex x="0.15" y="-2.05"/>
+<vertex x="0.35" y="-2.05"/>
+<vertex x="0.35" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="0.175" y="-2.525"/>
+<vertex x="0.175" y="-2.075"/>
+<vertex x="0.325" y="-2.075"/>
+<vertex x="0.325" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="0.65" y="-2.55"/>
+<vertex x="0.65" y="-2.05"/>
+<vertex x="0.85" y="-2.05"/>
+<vertex x="0.85" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="0.675" y="-2.525"/>
+<vertex x="0.675" y="-2.075"/>
+<vertex x="0.825" y="-2.075"/>
+<vertex x="0.825" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="1.15" y="-2.55"/>
+<vertex x="1.15" y="-2.05"/>
+<vertex x="1.35" y="-2.05"/>
+<vertex x="1.35" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="1.175" y="-2.525"/>
+<vertex x="1.175" y="-2.075"/>
+<vertex x="1.325" y="-2.075"/>
+<vertex x="1.325" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="1.85" y="-2.55"/>
+<vertex x="1.85" y="-2.1"/>
+<vertex x="1.8" y="-2.05"/>
+<vertex x="1.65" y="-2.05"/>
+<vertex x="1.65" y="-2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="1.825" y="-2.525"/>
+<vertex x="1.825" y="-2.125"/>
+<vertex x="1.775" y="-2.075"/>
+<vertex x="1.675" y="-2.075"/>
+<vertex x="1.675" y="-2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="-1.85"/>
+<vertex x="2.1" y="-1.85"/>
+<vertex x="2.05" y="-1.8"/>
+<vertex x="2.05" y="-1.65"/>
+<vertex x="2.55" y="-1.65"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="-1.825"/>
+<vertex x="2.125" y="-1.825"/>
+<vertex x="2.075" y="-1.775"/>
+<vertex x="2.075" y="-1.675"/>
+<vertex x="2.525" y="-1.675"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="-1.35"/>
+<vertex x="2.05" y="-1.35"/>
+<vertex x="2.05" y="-1.15"/>
+<vertex x="2.55" y="-1.15"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="-1.325"/>
+<vertex x="2.075" y="-1.325"/>
+<vertex x="2.075" y="-1.175"/>
+<vertex x="2.525" y="-1.175"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="-0.85"/>
+<vertex x="2.05" y="-0.85"/>
+<vertex x="2.05" y="-0.65"/>
+<vertex x="2.55" y="-0.65"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="-0.825"/>
+<vertex x="2.075" y="-0.825"/>
+<vertex x="2.075" y="-0.675"/>
+<vertex x="2.525" y="-0.675"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="-0.35"/>
+<vertex x="2.05" y="-0.35"/>
+<vertex x="2.05" y="-0.15"/>
+<vertex x="2.55" y="-0.15"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="-0.325"/>
+<vertex x="2.075" y="-0.325"/>
+<vertex x="2.075" y="-0.175"/>
+<vertex x="2.525" y="-0.175"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="0.15"/>
+<vertex x="2.05" y="0.15"/>
+<vertex x="2.05" y="0.35"/>
+<vertex x="2.55" y="0.35"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="0.175"/>
+<vertex x="2.075" y="0.175"/>
+<vertex x="2.075" y="0.325"/>
+<vertex x="2.525" y="0.325"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="0.65"/>
+<vertex x="2.05" y="0.65"/>
+<vertex x="2.05" y="0.85"/>
+<vertex x="2.55" y="0.85"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="0.675"/>
+<vertex x="2.075" y="0.675"/>
+<vertex x="2.075" y="0.825"/>
+<vertex x="2.525" y="0.825"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="1.15"/>
+<vertex x="2.05" y="1.15"/>
+<vertex x="2.05" y="1.35"/>
+<vertex x="2.55" y="1.35"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="1.175"/>
+<vertex x="2.075" y="1.175"/>
+<vertex x="2.075" y="1.325"/>
+<vertex x="2.525" y="1.325"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="2.55" y="1.85"/>
+<vertex x="2.1" y="1.85"/>
+<vertex x="2.05" y="1.8"/>
+<vertex x="2.05" y="1.65"/>
+<vertex x="2.55" y="1.65"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="2.525" y="1.825"/>
+<vertex x="2.125" y="1.825"/>
+<vertex x="2.075" y="1.775"/>
+<vertex x="2.075" y="1.675"/>
+<vertex x="2.525" y="1.675"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="1.85" y="2.55"/>
+<vertex x="1.85" y="2.1"/>
+<vertex x="1.8" y="2.05"/>
+<vertex x="1.65" y="2.05"/>
+<vertex x="1.65" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="1.825" y="2.525"/>
+<vertex x="1.825" y="2.125"/>
+<vertex x="1.775" y="2.075"/>
+<vertex x="1.675" y="2.075"/>
+<vertex x="1.675" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="1.35" y="2.55"/>
+<vertex x="1.35" y="2.05"/>
+<vertex x="1.15" y="2.05"/>
+<vertex x="1.15" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="1.325" y="2.525"/>
+<vertex x="1.325" y="2.075"/>
+<vertex x="1.175" y="2.075"/>
+<vertex x="1.175" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="0.85" y="2.55"/>
+<vertex x="0.85" y="2.05"/>
+<vertex x="0.65" y="2.05"/>
+<vertex x="0.65" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="0.825" y="2.525"/>
+<vertex x="0.825" y="2.075"/>
+<vertex x="0.675" y="2.075"/>
+<vertex x="0.675" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="0.35" y="2.55"/>
+<vertex x="0.35" y="2.05"/>
+<vertex x="0.15" y="2.05"/>
+<vertex x="0.15" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="0.325" y="2.525"/>
+<vertex x="0.325" y="2.075"/>
+<vertex x="0.175" y="2.075"/>
+<vertex x="0.175" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-0.15" y="2.55"/>
+<vertex x="-0.15" y="2.05"/>
+<vertex x="-0.35" y="2.05"/>
+<vertex x="-0.35" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-0.175" y="2.525"/>
+<vertex x="-0.175" y="2.075"/>
+<vertex x="-0.325" y="2.075"/>
+<vertex x="-0.325" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-0.65" y="2.55"/>
+<vertex x="-0.65" y="2.05"/>
+<vertex x="-0.85" y="2.05"/>
+<vertex x="-0.85" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-0.675" y="2.525"/>
+<vertex x="-0.675" y="2.075"/>
+<vertex x="-0.825" y="2.075"/>
+<vertex x="-0.825" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-1.15" y="2.55"/>
+<vertex x="-1.15" y="2.05"/>
+<vertex x="-1.35" y="2.05"/>
+<vertex x="-1.35" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-1.175" y="2.525"/>
+<vertex x="-1.175" y="2.075"/>
+<vertex x="-1.325" y="2.075"/>
+<vertex x="-1.325" y="2.525"/>
+</polygon>
+<polygon width="0.1016" layer="29">
+<vertex x="-1.85" y="2.55"/>
+<vertex x="-1.85" y="2.1"/>
+<vertex x="-1.8" y="2.05"/>
+<vertex x="-1.65" y="2.05"/>
+<vertex x="-1.65" y="2.55"/>
+</polygon>
+<polygon width="0.1016" layer="31">
+<vertex x="-1.825" y="2.525"/>
+<vertex x="-1.825" y="2.125"/>
+<vertex x="-1.775" y="2.075"/>
+<vertex x="-1.675" y="2.075"/>
+<vertex x="-1.675" y="2.525"/>
+</polygon>
+</package>
+<package name="POWER_SOT23-5">
+<description><b>Small Outline Transistor</b>, 5 lead</description>
+<wire x1="-1.544" y1="0.713" x2="1.544" y2="0.713" width="0.1524" layer="21"/>
+<wire x1="1.544" y1="0.713" x2="1.544" y2="-0.712" width="0.1524" layer="21"/>
+<wire x1="1.544" y1="-0.712" x2="-1.544" y2="-0.712" width="0.1524" layer="21"/>
+<wire x1="-1.544" y1="-0.712" x2="-1.544" y2="0.713" width="0.1524" layer="21"/>
+<rectangle x1="-1.1875" y1="0.7126" x2="-0.7125" y2="1.5439" layer="51"/>
+<rectangle x1="0.7125" y1="0.7126" x2="1.1875" y2="1.5439" layer="51"/>
+<rectangle x1="-1.1875" y1="-1.5437" x2="-0.7125" y2="-0.7124" layer="51"/>
+<rectangle x1="-0.2375" y1="-1.5437" x2="0.2375" y2="-0.7124" layer="51"/>
+<rectangle x1="0.7125" y1="-1.5437" x2="1.1875" y2="-0.7124" layer="51"/>
+<smd name="1" x="-0.95" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/>
+<smd name="2" x="0" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/>
+<smd name="3" x="0.95" y="-1.306" dx="0.5334" dy="1.1938" layer="1"/>
+<smd name="4" x="0.95" y="1.306" dx="0.5334" dy="1.1938" layer="1"/>
+<smd name="5" x="-0.95" y="1.306" dx="0.5334" dy="1.1938" layer="1"/>
+<text x="-1.778" y="-1.778" size="1.27" layer="25" ratio="10" rot="R90">>NAME</text>
+<text x="3.048" y="-1.778" size="1.27" layer="27" ratio="10" rot="R90">>VALUE</text>
+</package>
+<package name="SENSOR_SOT23">
+<description><b>SOT 23</b></description>
+<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/>
+<wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/>
+<wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/>
+<wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/>
+<wire x1="-1.4224" y1="-0.1524" x2="-1.4224" y2="0.6604" width="0.1524" layer="21"/>
+<wire x1="-1.4224" y1="0.6604" x2="-0.8636" y2="0.6604" width="0.1524" layer="21"/>
+<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.1524" width="0.1524" layer="21"/>
+<wire x1="0.8636" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="21"/>
+<rectangle x1="-0.2286" y1="0.7112" x2="0.2286" y2="1.2954" layer="51"/>
+<rectangle x1="0.7112" y1="-1.2954" x2="1.1684" y2="-0.7112" layer="51"/>
+<rectangle x1="-1.1684" y1="-1.2954" x2="-0.7112" y2="-0.7112" layer="51"/>
+<smd name="1" x="-0.95" y="-1.1" dx="0.762" dy="1.016" layer="1"/>
+<smd name="2" x="0.95" y="-1.1" dx="0.762" dy="1.016" layer="1"/>
+<smd name="3" x="0" y="1.1" dx="0.762" dy="1.016" layer="1"/>
+<text x="-1.905" y="1.905" size="1.27" layer="25">>NAME</text>
+<text x="-1.905" y="-3.175" size="1.27" layer="27">>VALUE</text>
+</package>
+<package name="SENSOR_TSSOP14">
+<description><b>Thin Shrink Small Outline Plastic 14</b></description>
+<circle x="-1.6256" y="-1.2192" radius="0.3048" width="0.1524" layer="21"/>
+<wire x1="-2.5146" y1="-2.0828" x2="2.5146" y2="-2.0828" width="0.1524" layer="51"/>
+<wire x1="2.5146" y1="2.0828" x2="2.5146" y2="-2.0828" width="0.1524" layer="51"/>
+<wire x1="2.5146" y1="2.0828" x2="-2.5146" y2="2.0828" width="0.1524" layer="51"/>
+<wire x1="-2.5146" y1="-2.0828" x2="-2.5146" y2="2.0828" width="0.1524" layer="51"/>
+<rectangle x1="1.8034" y1="2.1082" x2="2.0066" y2="2.9464" layer="51"/>
+<rectangle x1="1.1684" y1="2.1082" x2="1.3716" y2="2.9464" layer="51"/>
+<rectangle x1="0.5334" y1="2.1082" x2="0.7366" y2="2.9464" layer="51"/>
+<rectangle x1="-0.1016" y1="2.1082" x2="0.1016" y2="2.9464" layer="51"/>
+<rectangle x1="-0.7366" y1="2.1082" x2="-0.5334" y2="2.9464" layer="51"/>
+<rectangle x1="-1.3716" y1="2.1082" x2="-1.1684" y2="2.9464" layer="51"/>
+<rectangle x1="-2.0066" y1="2.1082" x2="-1.8034" y2="2.9464" layer="51"/>
+<rectangle x1="-2.0066" y1="-2.921" x2="-1.8034" y2="-2.0828" layer="51"/>
+<rectangle x1="-1.3716" y1="-2.921" x2="-1.1684" y2="-2.0828" layer="51"/>
+<rectangle x1="-0.7366" y1="-2.921" x2="-0.5334" y2="-2.0828" layer="51"/>
+<rectangle x1="-0.1016" y1="-2.921" x2="0.1016" y2="-2.0828" layer="51"/>
+<rectangle x1="0.5334" y1="-2.921" x2="0.7366" y2="-2.0828" layer="51"/>
+<rectangle x1="1.1684" y1="-2.921" x2="1.3716" y2="-2.0828" layer="51"/>
+<rectangle x1="1.8034" y1="-2.921" x2="2.0066" y2="-2.0828" layer="51"/>
+<smd name="1" x="-1.905" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="2" x="-1.27" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="3" x="-0.635" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="4" x="0" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="5" x="0.635" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="6" x="1.27" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="7" x="1.905" y="-2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="8" x="1.905" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="9" x="1.27" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="10" x="0.635" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="11" x="0" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="12" x="-0.635" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="13" x="-1.27" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<smd name="14" x="-1.905" y="2.7178" dx="0.3048" dy="0.9906" layer="1"/>
+<text x="-2.8956" y="-2.0828" size="1.016" layer="25" ratio="10" rot="R90">>NAME</text>
+<text x="3.8862" y="-2.0828" size="1.016" layer="27" ratio="10" rot="R90">>VALUE</text>
+</package>
+</packages>
+<symbols>
+<symbol name="SPARKFUN-CONNECTORS_CONN_02">
+<description><h3>2 Pin Connection</h3></description>
+<wire x1="3.81" y1="-2.54" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
+<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-2.54" width="0.4064" layer="94"/>
+<wire x1="3.81" y1="-2.54" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
+<pin name="1" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="2" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<text x="-2.54" y="-4.826" size="1.778" layer="96" font="vector">>VALUE</text>
+<text x="-2.54" y="5.588" size="1.778" layer="95" font="vector">>NAME</text>
+</symbol>
+<symbol name="SPARKFUN-CONNECTORS_CONN_04">
+<description><h3>4 Pin Connection</h3></description>
+<wire x1="1.27" y1="-5.08" x2="-5.08" y2="-5.08" width="0.4064" layer="94"/>
+<wire x1="-1.27" y1="2.54" x2="0" y2="2.54" width="0.6096" layer="94"/>
+<wire x1="-1.27" y1="0" x2="0" y2="0" width="0.6096" layer="94"/>
+<wire x1="-1.27" y1="-2.54" x2="0" y2="-2.54" width="0.6096" layer="94"/>
+<wire x1="-5.08" y1="7.62" x2="-5.08" y2="-5.08" width="0.4064" layer="94"/>
+<wire x1="1.27" y1="-5.08" x2="1.27" y2="7.62" width="0.4064" layer="94"/>
+<wire x1="-5.08" y1="7.62" x2="1.27" y2="7.62" width="0.4064" layer="94"/>
+<wire x1="-1.27" y1="5.08" x2="0" y2="5.08" width="0.6096" layer="94"/>
+<pin name="1" x="5.08" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="2" x="5.08" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="3" x="5.08" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="4" x="5.08" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<text x="-5.08" y="-7.366" size="1.778" layer="96" font="vector">>VALUE</text>
+<text x="-5.08" y="8.128" size="1.778" layer="95" font="vector">>NAME</text>
+</symbol>
+<symbol name="SPARKFUN-CONNECTORS_CONN_05">
+<description><h3>5 Pin Connection</h3></description>
+<wire x1="3.81" y1="-7.62" x2="-2.54" y2="-7.62" width="0.4064" layer="94"/>
+<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="-2.54" x2="2.54" y2="-2.54" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="-5.08" x2="2.54" y2="-5.08" width="0.6096" layer="94"/>
+<wire x1="-2.54" y1="7.62" x2="-2.54" y2="-7.62" width="0.4064" layer="94"/>
+<wire x1="3.81" y1="-7.62" x2="3.81" y2="7.62" width="0.4064" layer="94"/>
+<wire x1="-2.54" y1="7.62" x2="3.81" y2="7.62" width="0.4064" layer="94"/>
+<wire x1="1.27" y1="5.08" x2="2.54" y2="5.08" width="0.6096" layer="94"/>
+<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
+<pin name="1" x="7.62" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="2" x="7.62" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="3" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="4" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<pin name="5" x="7.62" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
+<text x="-2.54" y="-9.906" size="1.778" layer="96" font="vector">>VALUE</text>
+<text x="-2.54" y="8.128" size="1.778" layer="95" font="vector">>NAME</text>
+</symbol>
+<symbol name="BORKEDLABS-PASSIVES_CAP">
+<rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
+<rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
+<wire x1="0" y1="2.54" x2="0" y2="2.032" width="0.1524" layer="94"/>
+<wire x1="0" y1="0" x2="0" y2="0.508" width="0.1524" layer="94"/>
+<pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
+<pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
+<text x="1.524" y="2.921" size="1.778" layer="95">>NAME</text>
+<text x="1.524" y="-2.159" size="1.778" layer="96">>VALUE</text>
+<text x="1.524" y="-4.064" size="1.27" layer="97">>PACKAGE</text>
+<text x="1.524" y="-5.842" size="1.27" layer="97">>VOLTAGE</text>
+<text x="1.524" y="-7.62" size="1.27" layer="97">>TYPE</text>
+</symbol>
+<symbol name="BORKEDLABS-PASSIVES_RESISTOR">
+<wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.1524" layer="94"/>
+<wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.1524" layer="94"/>
+<wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.1524" layer="94"/>
+<pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
+<pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
+<text x="-3.81" y="1.4986" size="1.778" layer="95">>NAME</text>
+<text x="-3.81" y="-3.302" size="1.778" layer="96">>VALUE</text>
+<text x="-3.81" y="-6.858" size="1.27" layer="97">>PRECISION</text>
+<text x="-3.81" y="-5.08" size="1.27" layer="97">>PACKAGE</text>
+</symbol>
+<symbol name="COMM_RS485-2BY2-SN75C1168PWR">
+<circle x="3.302" y="18.288" radius="0.254" width="0.254" layer="94"/>
+<circle x="3.302" y="5.334" radius="0.254" width="0.254" layer="94"/>
+<circle x="3.302" y="-5.334" radius="0.254" width="0.254" layer="94"/>
+<circle x="3.302" y="-18.034" radius="0.254" width="0.254" layer="94"/>
+<wire x1="-12.7" y1="38.1" x2="-12.7" y2="-25.4" width="0.254" layer="94"/>
+<wire x1="-12.7" y1="-25.4" x2="12.7" y2="-25.4" width="0.254" layer="94"/>
+<wire x1="12.7" y1="-25.4" x2="12.7" y2="38.1" width="0.254" layer="94"/>
+<wire x1="12.7" y1="38.1" x2="-12.7" y2="38.1" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="20.32" x2="0" y2="20.32" width="0.254" layer="94"/>
+<wire x1="0" y1="20.32" x2="2.54" y2="22.86" width="0.254" layer="94"/>
+<wire x1="2.54" y1="22.86" x2="2.54" y2="17.78" width="0.254" layer="94"/>
+<wire x1="2.54" y1="17.78" x2="0" y2="20.32" width="0.254" layer="94"/>
+<wire x1="0" y1="10.16" x2="2.54" y2="7.62" width="0.254" layer="94"/>
+<wire x1="2.54" y1="7.62" x2="0" y2="5.08" width="0.254" layer="94"/>
+<wire x1="0" y1="5.08" x2="0" y2="7.62" width="0.254" layer="94"/>
+<wire x1="0" y1="7.62" x2="0" y2="10.16" width="0.254" layer="94"/>
+<wire x1="2.54" y1="10.16" x2="2.54" y2="5.08" width="0.254" layer="94"/>
+<wire x1="-7.62" y1="5.08" x2="-2.54" y2="5.08" width="0.254" layer="94"/>
+<wire x1="-2.54" y1="5.08" x2="-2.54" y2="7.62" width="0.254" layer="94"/>
+<wire x1="-2.54" y1="7.62" x2="0" y2="7.62" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="10.16" x2="0" y2="10.16" width="0.254" layer="94"/>
+<wire x1="0" y1="-7.62" x2="2.54" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="2.54" y1="-5.08" x2="2.54" y2="-10.16" width="0.254" layer="94"/>
+<wire x1="2.54" y1="-10.16" x2="0" y2="-7.62" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="-7.62" x2="0" y2="-7.62" width="0.254" layer="94"/>
+<wire x1="0" y1="-17.78" x2="2.54" y2="-20.32" width="0.254" layer="94"/>
+<wire x1="2.54" y1="-20.32" x2="0" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="0" y1="-22.86" x2="0" y2="-20.32" width="0.254" layer="94"/>
+<wire x1="0" y1="-20.32" x2="0" y2="-17.78" width="0.254" layer="94"/>
+<wire x1="2.54" y1="-17.78" x2="2.54" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="-7.62" y1="-22.86" x2="-2.54" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="-2.54" y1="-22.86" x2="-2.54" y2="-20.32" width="0.254" layer="94"/>
+<wire x1="0" y1="-20.32" x2="-2.54" y2="-20.32" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="-17.78" x2="0" y2="-17.78" width="0.254" layer="94"/>
+<pin name="1A" x="17.78" y="25.4" length="middle" rot="R180"/>
+<pin name="1B" x="17.78" y="15.24" length="middle" rot="R180"/>
+<pin name="1D" x="-17.78" y="5.08" length="middle"/>
+<pin name="1DE" x="-17.78" y="10.16" length="middle"/>
+<pin name="1R" x="-17.78" y="20.32" length="middle"/>
+<pin name="1Y" x="17.78" y="10.16" length="middle" rot="R180"/>
+<pin name="1Z" x="17.78" y="5.08" length="middle" rot="R180"/>
+<pin name="2A" x="17.78" y="-12.7" length="middle" rot="R180"/>
+<pin name="2B" x="17.78" y="-2.54" length="middle" rot="R180"/>
+<pin name="2D" x="-17.78" y="-22.86" length="middle"/>
+<pin name="2DE" x="-17.78" y="-17.78" length="middle"/>
+<pin name="2R" x="-17.78" y="-7.62" length="middle"/>
+<pin name="2Y" x="17.78" y="-22.86" length="middle" rot="R180"/>
+<pin name="2Z" x="17.78" y="-17.78" length="middle" rot="R180"/>
+<pin name="GND" x="-17.78" y="27.94" length="middle"/>
+<pin name="VCC" x="-17.78" y="35.56" length="middle"/>
+<text x="-2.54" y="38.1" size="1.27" layer="95">>NAME</text>
+<text x="-2.54" y="-27.94" size="1.27" layer="96">>VALUE</text>
+</symbol>
+<symbol name="CONNECTOR_ATK-RS48PHYVE">
+<wire x1="-5.08" y1="43.18" x2="-5.08" y2="-33.02" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="-33.02" x2="20.32" y2="-33.02" width="0.254" layer="94"/>
+<wire x1="20.32" y1="-33.02" x2="20.32" y2="43.18" width="0.254" layer="94"/>
+<wire x1="20.32" y1="43.18" x2="-5.08" y2="43.18" width="0.254" layer="94"/>
+<pin name="3V3-LED" x="-10.16" y="-15.24" length="middle"/>
+<pin name="CLKRX-A" x="-10.16" y="40.64" length="middle"/>
+<pin name="CLKRX-B" x="-10.16" y="30.48" length="middle"/>
+<pin name="CLKRX-Y" x="-10.16" y="-7.62" length="middle"/>
+<pin name="CLKTX-Z" x="-10.16" y="-2.54" length="middle"/>
+<pin name="LED-GRN-CATHODE" x="-10.16" y="-20.32" length="middle"/>
+<pin name="LED-YLW-CATHODE" x="-10.16" y="-30.48" length="middle"/>
+<pin name="RX-A" x="-10.16" y="2.54" length="middle"/>
+<pin name="RX-B" x="-10.16" y="12.7" length="middle"/>
+<pin name="TX-Y" x="-10.16" y="25.4" length="middle"/>
+<pin name="TX-Z" x="-10.16" y="20.32" length="middle"/>
+<text x="0" y="45.72" size="1.27" layer="95">>NAME</text>
+<text x="0" y="-38.1" size="1.27" layer="95">>VALUE</text>
+</symbol>
+<symbol name="CONNECTOR_DOT">
+<circle x="0" y="0" radius="2.54" width="0.254" layer="94"/>
+</symbol>
+<symbol name="CONNECTOR_JRTOMBSTONE">
+<wire x1="-5.08" y1="-5.08" x2="-5.08" y2="2.54" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="2.54" x2="5.08" y2="2.54" width="0.254" layer="94" curve="-180"/>
+<wire x1="5.08" y1="2.54" x2="5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="5.08" y1="-5.08" x2="-5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="-3.81" y1="3.175" x2="-1.27" y2="3.175" width="0.254" layer="94"/>
+<wire x1="-1.27" y1="3.175" x2="0" y2="3.175" width="0.254" layer="94"/>
+<wire x1="-1.27" y1="3.175" x2="-1.27" y2="-0.635" width="0.254" layer="94"/>
+<wire x1="-1.27" y1="-0.635" x2="-3.81" y2="-1.27" width="0.254" layer="94" curve="-143.130069"/>
+<wire x1="0.635" y1="3.175" x2="0.635" y2="-1.905" width="0.254" layer="94"/>
+<wire x1="0.635" y1="3.175" x2="1.27" y2="3.175" width="0.254" layer="94"/>
+<wire x1="1.27" y1="3.175" x2="2.54" y2="0.635" width="0.254" layer="94" curve="-126.869898"/>
+<wire x1="2.54" y1="0.635" x2="1.27" y2="0" width="0.254" layer="94" curve="-53.129967"/>
+<wire x1="1.27" y1="0" x2="3.175" y2="-1.905" width="0.254" layer="94"/>
+</symbol>
+<symbol name="FAB_TS2">
+<circle x="0" y="-2.54" radius="0.127" width="0.4064" layer="94"/>
+<circle x="0" y="2.54" radius="0.127" width="0.4064" layer="94"/>
+<wire x1="0" y1="1.905" x2="0" y2="2.54" width="0.254" layer="94"/>
+<wire x1="-4.445" y1="1.905" x2="-3.175" y2="1.905" width="0.254" layer="94"/>
+<wire x1="-4.445" y1="-1.905" x2="-3.175" y2="-1.905" width="0.254" layer="94"/>
+<wire x1="-4.445" y1="1.905" x2="-4.445" y2="0" width="0.254" layer="94"/>
+<wire x1="-4.445" y1="0" x2="-4.445" y2="-1.905" width="0.254" layer="94"/>
+<wire x1="-2.54" y1="0" x2="-1.905" y2="0" width="0.1524" layer="94"/>
+<wire x1="-1.27" y1="0" x2="-0.635" y2="0" width="0.1524" layer="94"/>
+<wire x1="-4.445" y1="0" x2="-3.175" y2="0" width="0.1524" layer="94"/>
+<wire x1="2.54" y1="2.54" x2="0" y2="2.54" width="0.1524" layer="94"/>
+<wire x1="2.54" y1="-2.54" x2="0" y2="-2.54" width="0.1524" layer="94"/>
+<wire x1="0" y1="-2.54" x2="-1.27" y2="1.905" width="0.254" layer="94"/>
+<pin name="P" x="0" y="-5.08" visible="pad" length="short" direction="pas" swaplevel="2" rot="R90"/>
+<pin name="P1" x="2.54" y="-5.08" visible="pad" length="short" direction="pas" swaplevel="2" rot="R90"/>
+<pin name="S" x="0" y="5.08" visible="pad" length="short" direction="pas" swaplevel="1" rot="R270"/>
+<pin name="S1" x="2.54" y="5.08" visible="pad" length="short" direction="pas" swaplevel="1" rot="R270"/>
+<text x="-6.35" y="-2.54" size="1.778" layer="95" rot="R90">>NAME</text>
+<text x="-3.81" y="3.175" size="1.778" layer="96" rot="R90">>VALUE</text>
+</symbol>
+<symbol name="LIGHTS_LED">
+<description>LED</description>
+<wire x1="1.27" y1="2.54" x2="0" y2="0" width="0.254" layer="94"/>
+<wire x1="0" y1="0" x2="-1.27" y2="2.54" width="0.254" layer="94"/>
+<wire x1="1.27" y1="0" x2="0" y2="0" width="0.254" layer="94"/>
+<wire x1="0" y1="0" x2="-1.27" y2="0" width="0.254" layer="94"/>
+<wire x1="1.27" y1="2.54" x2="0" y2="2.54" width="0.254" layer="94"/>
+<wire x1="0" y1="2.54" x2="-1.27" y2="2.54" width="0.254" layer="94"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.1524" layer="94"/>
+<wire x1="-2.032" y1="1.778" x2="-3.429" y2="0.381" width="0.1524" layer="94"/>
+<wire x1="-1.905" y1="0.635" x2="-3.302" y2="-0.762" width="0.1524" layer="94"/>
+<pin name="A" x="0" y="5.08" visible="off" length="short" direction="pas" rot="R270"/>
+<pin name="C" x="0" y="-2.54" visible="off" length="short" direction="pas" rot="R90"/>
+<text x="3.556" y="-2.032" size="1.778" layer="95" rot="R90">>NAME</text>
+<text x="5.715" y="-2.032" size="1.778" layer="96" rot="R90">>VALUE</text>
+<polygon width="0.1524" layer="94">
+<vertex x="-3.429" y="0.381"/>
+<vertex x="-3.048" y="1.27"/>
+<vertex x="-2.54" y="0.762"/>
+</polygon>
+<polygon width="0.1524" layer="94">
+<vertex x="-3.302" y="-0.762"/>
+<vertex x="-2.921" y="0.127"/>
+<vertex x="-2.413" y="-0.381"/>
+</polygon>
+</symbol>
+<symbol name="MICROCONTROLLERS_ATXMEGA_A3U">
+<wire x1="20.32" y1="68.58" x2="20.32" y2="-68.58" width="0.254" layer="94"/>
+<wire x1="20.32" y1="-68.58" x2="-20.32" y2="-68.58" width="0.254" layer="94"/>
+<wire x1="-20.32" y1="-68.58" x2="-20.32" y2="68.58" width="0.254" layer="94"/>
+<wire x1="-20.32" y1="68.58" x2="20.32" y2="68.58" width="0.254" layer="94"/>
+<pin name="AVCC" x="-25.4" y="50.8" length="middle"/>
+<pin name="GND" x="-25.4" y="38.1" length="middle"/>
+<pin name="PA0/AREF" x="25.4" y="66.04" length="middle" rot="R180"/>
+<pin name="PA1" x="25.4" y="63.5" length="middle" rot="R180"/>
+<pin name="PA2" x="25.4" y="60.96" length="middle" rot="R180"/>
+<pin name="PA3" x="25.4" y="58.42" length="middle" rot="R180"/>
+<pin name="PA4" x="25.4" y="55.88" length="middle" rot="R180"/>
+<pin name="PA5" x="25.4" y="53.34" length="middle" rot="R180"/>
+<pin name="PA6" x="25.4" y="50.8" length="middle" rot="R180"/>
+<pin name="PA7" x="25.4" y="48.26" length="middle" rot="R180"/>
+<pin name="PB0/AREF" x="25.4" y="43.18" length="middle" rot="R180"/>
+<pin name="PB1" x="25.4" y="40.64" length="middle" rot="R180"/>
+<pin name="PB2/DAC0" x="25.4" y="38.1" length="middle" rot="R180"/>
+<pin name="PB3/DAC1" x="25.4" y="35.56" length="middle" rot="R180"/>
+<pin name="PB4" x="25.4" y="33.02" length="middle" rot="R180"/>
+<pin name="PB5" x="25.4" y="30.48" length="middle" rot="R180"/>
+<pin name="PB6" x="25.4" y="27.94" length="middle" rot="R180"/>
+<pin name="PB7" x="25.4" y="25.4" length="middle" rot="R180"/>
+<pin name="PC0/SDA" x="25.4" y="20.32" length="middle" rot="R180"/>
+<pin name="PC1/SCL/XCK0" x="25.4" y="17.78" length="middle" rot="R180"/>
+<pin name="PC2/RXD0" x="25.4" y="15.24" length="middle" rot="R180"/>
+<pin name="PC3/TXD0" x="25.4" y="12.7" length="middle" rot="R180"/>
+<pin name="PC4/SS" x="25.4" y="10.16" length="middle" rot="R180"/>
+<pin name="PC5/XCK1/MOSI" x="25.4" y="7.62" length="middle" rot="R180"/>
+<pin name="PC6/RXD1/MISO" x="25.4" y="5.08" length="middle" rot="R180"/>
+<pin name="PC7/TXD1/SCK" x="25.4" y="2.54" length="middle" rot="R180"/>
+<pin name="PD0" x="25.4" y="-2.54" length="middle" rot="R180"/>
+<pin name="PD1/XCK0" x="25.4" y="-5.08" length="middle" rot="R180"/>
+<pin name="PD2/RXD0" x="25.4" y="-7.62" length="middle" rot="R180"/>
+<pin name="PD3/TXD0" x="25.4" y="-10.16" length="middle" rot="R180"/>
+<pin name="PD4/SS" x="25.4" y="-12.7" length="middle" rot="R180"/>
+<pin name="PD5/XCK/MOSI" x="25.4" y="-15.24" length="middle" rot="R180"/>
+<pin name="PD6/RXD1/MISO/D-" x="25.4" y="-17.78" length="middle" rot="R180"/>
+<pin name="PD7/TXD1/SCK/D+" x="25.4" y="-20.32" length="middle" rot="R180"/>
+<pin name="PDI_DATA" x="-25.4" y="60.96" length="middle"/>
+<pin name="PE0/SDA" x="25.4" y="-25.4" length="middle" rot="R180"/>
+<pin name="PE1/SCL/XCK0" x="25.4" y="-27.94" length="middle" rot="R180"/>
+<pin name="PE2/RXD0" x="25.4" y="-30.48" length="middle" rot="R180"/>
+<pin name="PE3/TXD0" x="25.4" y="-33.02" length="middle" rot="R180"/>
+<pin name="PE4/SS" x="25.4" y="-35.56" length="middle" rot="R180"/>
+<pin name="PE5/XCK1/MOSI" x="25.4" y="-38.1" length="middle" rot="R180"/>
+<pin name="PE6/RXD1/MISO" x="25.4" y="-40.64" length="middle" rot="R180"/>
+<pin name="PE7/TXD1/SCK" x="25.4" y="-43.18" length="middle" rot="R180"/>
+<pin name="PF0" x="25.4" y="-48.26" length="middle" rot="R180"/>
+<pin name="PF1/XCK0" x="25.4" y="-50.8" length="middle" rot="R180"/>
+<pin name="PF2/RXD0" x="25.4" y="-53.34" length="middle" rot="R180"/>
+<pin name="PF3/TXD0" x="25.4" y="-55.88" length="middle" rot="R180"/>
+<pin name="PF4" x="25.4" y="-58.42" length="middle" rot="R180"/>
+<pin name="PF5" x="25.4" y="-60.96" length="middle" rot="R180"/>
+<pin name="PF6" x="25.4" y="-63.5" length="middle" rot="R180"/>
+<pin name="PF7" x="25.4" y="-66.04" length="middle" rot="R180"/>
+<pin name="PR0/XTAL2" x="-25.4" y="7.62" length="middle"/>
+<pin name="PR1/XTAL1" x="-25.4" y="-7.62" length="middle"/>
+<pin name="RESET/PDI_CLK" x="-25.4" y="66.04" length="middle"/>
+<pin name="VCC" x="-25.4" y="45.72" length="middle"/>
+</symbol>
+<symbol name="MICROCONTROLLERS_PDI">
+<description><h3>6 Pin Connection</h3>
+3x2 pin layout</description>
+<wire x1="-11.43" y1="5.08" x2="-11.43" y2="-5.08" width="0.4064" layer="94"/>
+<wire x1="11.43" y1="-5.08" x2="-11.43" y2="-5.08" width="0.4064" layer="94"/>
+<wire x1="11.43" y1="-5.08" x2="11.43" y2="5.08" width="0.4064" layer="94"/>
+<wire x1="-11.43" y1="5.08" x2="11.43" y2="5.08" width="0.4064" layer="94"/>
+<pin name="GND" x="15.24" y="-2.54" length="middle" rot="R180"/>
+<pin name="NC1" x="-15.24" y="0" length="middle"/>
+<pin name="NC2" x="15.24" y="0" length="middle" rot="R180"/>
+<pin name="PDI_CLK" x="-15.24" y="-2.54" length="middle"/>
+<pin name="PDI_DATA" x="-15.24" y="2.54" length="middle"/>
+<pin name="VCC" x="15.24" y="2.54" length="middle" rot="R180"/>
+<text x="-3.556" y="5.588" size="1.778" layer="95" font="vector">>NAME</text>
+<text x="-3.302" y="-5.842" size="1.778" layer="96" font="vector" align="top-left">>VALUE</text>
+</symbol>
+<symbol name="PASSIVES_CERAMIC_RESONATOR">
+<circle x="-3.81" y="0" radius="0.254" width="0" layer="94"/>
+<circle x="3.81" y="0" radius="0.254" width="0" layer="94"/>
+<circle x="0" y="-3.302" radius="0.254" width="0" layer="94"/>
+<wire x1="-5.08" y1="2.54" x2="5.08" y2="2.54" width="0.254" layer="94"/>
+<wire x1="5.08" y1="2.54" x2="5.08" y2="0" width="0.254" layer="94"/>
+<wire x1="5.08" y1="0" x2="5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="5.08" y1="-5.08" x2="0" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="0" y1="-5.08" x2="-5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="-5.08" x2="-5.08" y2="0" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="0" x2="-5.08" y2="2.54" width="0.254" layer="94"/>
+<wire x1="-5.08" y1="0" x2="-3.81" y2="0" width="0.1524" layer="94"/>
+<wire x1="-3.81" y1="0" x2="-1.27" y2="0" width="0.1524" layer="94"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="1.27" width="0.1524" layer="94"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="-1.27" width="0.1524" layer="94"/>
+<wire x1="-0.508" y1="1.27" x2="-0.508" y2="-1.27" width="0.1524" layer="94"/>
+<wire x1="-0.508" y1="-1.27" x2="0.508" y2="-1.27" width="0.1524" layer="94"/>
+<wire x1="0.508" y1="-1.27" x2="0.508" y2="1.27" width="0.1524" layer="94"/>
+<wire x1="0.508" y1="1.27" x2="-0.508" y2="1.27" width="0.1524" layer="94"/>
+<wire x1="1.27" y1="1.27" x2="1.27" y2="0" width="0.1524" layer="94"/>
+<wire x1="1.27" y1="0" x2="1.27" y2="-1.27" width="0.1524" layer="94"/>
+<wire x1="1.27" y1="0" x2="3.81" y2="0" width="0.1524" layer="94"/>
+<wire x1="3.81" y1="0" x2="5.08" y2="0" width="0.1524" layer="94"/>
+<wire x1="0" y1="-5.08" x2="0" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="0" y1="-3.302" x2="-1.778" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="0" y1="-3.302" x2="1.778" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="1.778" y1="-2.286" x2="1.778" y2="-4.318" width="0.1524" layer="94"/>
+<wire x1="2.54" y1="-2.286" x2="2.54" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="2.54" y1="-3.302" x2="2.54" y2="-4.318" width="0.1524" layer="94"/>
+<wire x1="2.54" y1="-3.302" x2="3.81" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="3.81" y1="-3.302" x2="3.81" y2="0" width="0.1524" layer="94"/>
+<wire x1="-1.778" y1="-2.286" x2="-1.778" y2="-4.318" width="0.1524" layer="94"/>
+<wire x1="-2.54" y1="-2.286" x2="-2.54" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="-2.54" y1="-3.302" x2="-2.54" y2="-4.318" width="0.1524" layer="94"/>
+<wire x1="-2.54" y1="-3.302" x2="-3.81" y2="-3.302" width="0.1524" layer="94"/>
+<wire x1="-3.81" y1="-3.302" x2="-3.81" y2="0" width="0.1524" layer="94"/>
+<pin name="1" x="-7.62" y="0" visible="pad" length="short" direction="pas"/>
+<pin name="2" x="0" y="-7.62" visible="pad" length="short" direction="pas" rot="R90"/>
+<pin name="3" x="7.62" y="0" visible="pad" length="short" direction="pas" rot="R180"/>
+<text x="-5.08" y="3.81" size="1.778" layer="95">>NAME</text>
+<text x="2.54" y="-7.62" size="1.778" layer="96">>VALUE</text>
+</symbol>
+<symbol name="POWER_PNPAIR">
+<wire x1="-7.62" y1="15.24" x2="-7.62" y2="-17.78" width="0.127" layer="94"/>
+<wire x1="-7.62" y1="-17.78" x2="17.78" y2="-17.78" width="0.127" layer="94"/>
+<wire x1="17.78" y1="-17.78" x2="17.78" y2="15.24" width="0.127" layer="94"/>
+<wire x1="17.78" y1="15.24" x2="-7.62" y2="15.24" width="0.127" layer="94"/>
+<wire x1="-1.27" y1="-8.89" x2="4.445" y2="-8.89" width="0.127" layer="94"/>
+<wire x1="4.445" y1="-8.89" x2="4.445" y2="-5.08" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-8.89" x2="5.08" y2="-8.89" width="0.127" layer="94"/>
+<wire x1="5.08" y1="-8.89" x2="5.08" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="5.08" y1="-6.985" x2="5.08" y2="-5.08" width="0.127" layer="94"/>
+<wire x1="5.08" y1="-5.08" x2="6.35" y2="-5.08" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-5.08" x2="6.35" y2="-4.445" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-4.445" x2="6.35" y2="0" width="0.127" layer="94"/>
+<wire x1="6.35" y1="0" x2="8.89" y2="0" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-8.89" x2="6.35" y2="-9.525" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-9.525" x2="6.35" y2="-11.43" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-8.89" x2="6.35" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-6.985" x2="5.08" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="5.08" y1="-6.985" x2="5.715" y2="-6.35" width="0.127" layer="94"/>
+<wire x1="5.715" y1="-6.35" x2="5.715" y2="-7.62" width="0.127" layer="94"/>
+<wire x1="5.715" y1="-7.62" x2="5.08" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="6.35" y1="-9.525" x2="8.255" y2="-9.525" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-9.525" x2="8.255" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-6.985" x2="8.255" y2="-6.35" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-6.35" x2="8.255" y2="-4.445" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-4.445" x2="6.35" y2="-4.445" width="0.127" layer="94"/>
+<wire x1="7.62" y1="-6.35" x2="8.255" y2="-6.35" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-6.35" x2="8.89" y2="-6.35" width="0.127" layer="94"/>
+<wire x1="7.62" y1="-6.985" x2="8.255" y2="-6.35" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-6.35" x2="8.89" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="8.89" y1="-6.985" x2="8.255" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="8.255" y1="-6.985" x2="7.62" y2="-6.985" width="0.127" layer="94"/>
+<wire x1="-1.27" y1="5.08" x2="4.445" y2="5.08" width="0.127" layer="94"/>
+<wire x1="4.445" y1="5.08" x2="4.445" y2="8.89" width="0.127" layer="94"/>
+<wire x1="6.35" y1="5.08" x2="5.08" y2="5.08" width="0.127" layer="94"/>
+<wire x1="5.08" y1="5.08" x2="5.08" y2="6.985" width="0.127" layer="94"/>
+<wire x1="5.08" y1="6.985" x2="5.08" y2="8.89" width="0.127" layer="94"/>
+<wire x1="5.08" y1="8.89" x2="6.35" y2="8.89" width="0.127" layer="94"/>
+<wire x1="6.35" y1="8.89" x2="6.35" y2="9.525" width="0.127" layer="94"/>
+<wire x1="6.35" y1="5.08" x2="6.35" y2="4.445" width="0.127" layer="94"/>
+<wire x1="6.35" y1="5.08" x2="6.35" y2="6.985" width="0.127" layer="94"/>
+<wire x1="6.35" y1="6.985" x2="5.08" y2="6.985" width="0.127" layer="94"/>
+<wire x1="6.35" y1="4.445" x2="8.255" y2="4.445" width="0.127" layer="94"/>
+<wire x1="8.255" y1="4.445" x2="8.255" y2="6.985" width="0.127" layer="94"/>
+<wire x1="8.255" y1="6.985" x2="8.255" y2="9.525" width="0.127" layer="94"/>
+<wire x1="8.255" y1="9.525" x2="6.35" y2="9.525" width="0.127" layer="94"/>
+<wire x1="6.35" y1="9.525" x2="6.35" y2="12.065" width="0.127" layer="94"/>
+<wire x1="8.255" y1="6.985" x2="7.62" y2="7.62" width="0.127" layer="94"/>
+<wire x1="7.62" y1="7.62" x2="8.89" y2="7.62" width="0.127" layer="94"/>
+<wire x1="8.89" y1="7.62" x2="8.255" y2="6.985" width="0.127" layer="94"/>
+<wire x1="8.255" y1="6.985" x2="7.62" y2="6.985" width="0.127" layer="94"/>
+<wire x1="8.255" y1="6.985" x2="8.89" y2="6.985" width="0.127" layer="94"/>
+<wire x1="6.35" y1="6.985" x2="5.715" y2="7.62" width="0.127" layer="94"/>
+<wire x1="5.715" y1="7.62" x2="5.715" y2="6.35" width="0.127" layer="94"/>
+<wire x1="5.715" y1="6.35" x2="6.35" y2="6.985" width="0.127" layer="94"/>
+<wire x1="6.35" y1="4.445" x2="6.35" y2="0" width="0.127" layer="94"/>
+<pin name="DN/DP" x="22.86" y="0" length="middle" rot="R180"/>
+<pin name="GN" x="-12.7" y="-10.16" length="middle"/>
+<pin name="GP" x="-12.7" y="7.62" length="middle"/>
+<pin name="SN" x="5.08" y="-22.86" length="middle" rot="R90"/>
+<pin name="SP" x="5.08" y="20.32" length="middle" rot="R270"/>
+</symbol>
+<symbol name="POWER_PWRPAD">
+<pin name="PWRPAD" x="-5.08" y="0" length="middle"/>
+</symbol>
+<symbol name="POWER_TMC262">
+<wire x1="-15.24" y1="48.26" x2="-15.24" y2="-43.18" width="0.254" layer="94"/>
+<wire x1="-15.24" y1="-43.18" x2="15.24" y2="-43.18" width="0.254" layer="94"/>
+<wire x1="15.24" y1="-43.18" x2="15.24" y2="48.26" width="0.254" layer="94"/>
+<wire x1="15.24" y1="48.26" x2="-15.24" y2="48.26" width="0.254" layer="94"/>
+<pin name="5VOUT" x="20.32" y="35.56" length="middle" rot="R180"/>
+<pin name="BMA1" x="20.32" y="20.32" length="middle" rot="R180"/>
+<pin name="BMA2" x="20.32" y="17.78" length="middle" rot="R180"/>
+<pin name="BMB1" x="20.32" y="-12.7" length="middle" rot="R180"/>
+<pin name="BMB2" x="20.32" y="-15.24" length="middle" rot="R180"/>
+<pin name="CLK" x="-20.32" y="40.64" length="middle"/>
+<pin name="CSN" x="-20.32" y="17.78" length="middle"/>
+<pin name="DIE_PAD" x="20.32" y="-40.64" length="middle" rot="R180"/>
+<pin name="DIR" x="-20.32" y="33.02" length="middle"/>
+<pin name="ENABLE" x="-20.32" y="22.86" length="middle"/>
+<pin name="GND@1" x="20.32" y="-35.56" length="middle" rot="R180"/>
+<pin name="GND@2" x="20.32" y="-38.1" length="middle" rot="R180"/>
+<pin name="GNDP" x="20.32" y="-33.02" length="middle" rot="R180"/>
+<pin name="HA1" x="20.32" y="27.94" length="middle" rot="R180"/>
+<pin name="HA2" x="20.32" y="25.4" length="middle" rot="R180"/>
+<pin name="HB1" x="20.32" y="-5.08" length="middle" rot="R180"/>
+<pin name="HB2" x="20.32" y="-7.62" length="middle" rot="R180"/>
+<pin name="LA1" x="20.32" y="10.16" length="middle" rot="R180"/>
+<pin name="LA2" x="20.32" y="12.7" length="middle" rot="R180"/>
+<pin name="LB1" x="20.32" y="-22.86" length="middle" rot="R180"/>
+<pin name="LB2" x="20.32" y="-20.32" length="middle" rot="R180"/>
+<pin name="SCK" x="-20.32" y="15.24" length="middle"/>
+<pin name="SDI" x="-20.32" y="12.7" length="middle"/>
+<pin name="SDO" x="-20.32" y="10.16" length="middle"/>
+<pin name="SG_TST" x="-20.32" y="5.08" length="middle"/>
+<pin name="SRA" x="20.32" y="5.08" length="middle" rot="R180"/>
+<pin name="SRB" x="20.32" y="-27.94" length="middle" rot="R180"/>
+<pin name="STEP" x="-20.32" y="35.56" length="middle"/>
+<pin name="TEST_ANA" x="-20.32" y="0" length="middle"/>
+<pin name="TST_MODE" x="-20.32" y="27.94" length="middle"/>
+<pin name="VCC_IO" x="-20.32" y="45.72" length="middle"/>
+<pin name="VHS" x="20.32" y="40.64" length="middle" rot="R180"/>
+<pin name="VS" x="20.32" y="45.72" length="middle" rot="R180"/>
+<text x="-2.54" y="50.8" size="1.27" layer="95">>NAME</text>
+<text x="-2.54" y="-48.26" size="1.27" layer="96">>VALUE</text>
+</symbol>
+<symbol name="POWER_VREG-AP2112">
+<wire x1="-7.62" y1="5.08" x2="-7.62" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="-7.62" y1="-5.08" x2="7.62" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="7.62" y1="-5.08" x2="7.62" y2="5.08" width="0.254" layer="94"/>
+<wire x1="7.62" y1="5.08" x2="-7.62" y2="5.08" width="0.254" layer="94"/>
+<pin name="EN" x="-12.7" y="-2.54" length="middle"/>
+<pin name="GND" x="0" y="-10.16" length="middle" rot="R90"/>
+<pin name="VIN" x="-12.7" y="2.54" length="middle"/>
+<pin name="VOUT" x="12.7" y="2.54" length="middle" rot="R180"/>
+<text x="-2.54" y="7.62" size="1.27" layer="95">>NAME</text>
+<text x="2.54" y="-7.62" size="1.27" layer="96">>VALUE</text>
+</symbol>
+<symbol name="SENSOR_AS5047">
+<wire x1="-10.16" y1="10.16" x2="10.16" y2="10.16" width="0.254" layer="94"/>
+<wire x1="10.16" y1="10.16" x2="10.16" y2="-10.16" width="0.254" layer="94"/>
+<wire x1="10.16" y1="-10.16" x2="-10.16" y2="-10.16" width="0.254" layer="94"/>
+<wire x1="-10.16" y1="-10.16" x2="-10.16" y2="10.16" width="0.254" layer="94"/>
+<pin name="A" x="-15.24" y="-5.08" length="middle"/>
+<pin name="B" x="-15.24" y="-7.62" length="middle"/>
+<pin name="CLK" x="-15.24" y="5.08" length="middle"/>
+<pin name="CSN" x="-15.24" y="7.62" length="middle"/>
+<pin name="GND" x="15.24" y="5.08" length="middle" rot="R180"/>
+<pin name="I" x="15.24" y="7.62" length="middle" rot="R180"/>
+<pin name="MISO" x="-15.24" y="2.54" length="middle"/>
+<pin name="MOSI" x="-15.24" y="0" length="middle"/>
+<pin name="TEST" x="-15.24" y="-2.54" length="middle"/>
+<pin name="U" x="15.24" y="-2.54" length="middle" rot="R180"/>
+<pin name="V" x="15.24" y="-5.08" length="middle" rot="R180"/>
+<pin name="VDD" x="15.24" y="0" length="middle" rot="R180"/>
+<pin name="VDD3V" x="15.24" y="2.54" length="middle" rot="R180"/>
+<pin name="W" x="15.24" y="-7.62" length="middle" rot="R180"/>
+<text x="-2.54" y="12.7" size="1.27" layer="95">>NAME</text>
+<text x="-2.54" y="-12.7" size="1.27" layer="96">>VALUE</text>
+</symbol>
+<symbol name="SENSOR_RTD-NI1000SOT">
+<wire x1="-7.62" y1="7.62" x2="7.62" y2="7.62" width="0.254" layer="94"/>
+<wire x1="7.62" y1="7.62" x2="7.62" y2="-7.62" width="0.254" layer="94"/>
+<wire x1="7.62" y1="-7.62" x2="-7.62" y2="-7.62" width="0.254" layer="94"/>
+<wire x1="-7.62" y1="-7.62" x2="-7.62" y2="7.62" width="0.254" layer="94"/>
+<pin name="SENSE" x="12.7" y="0" length="middle" rot="R180"/>
+<pin name="TERM1" x="-12.7" y="5.08" length="middle"/>
+<pin name="TERM2" x="-12.7" y="-5.08" length="middle"/>
+<text x="-5.08" y="10.16" size="1.778" layer="95">>NAME</text>
+<text x="-5.08" y="-12.7" size="1.778" layer="96">>VALUE</text>
+</symbol>
+<symbol name="SUPPLY1_+3V3">
+<wire x1="1.27" y1="-1.905" x2="0" y2="0" width="0.254" layer="94"/>
+<wire x1="0" y1="0" x2="-1.27" y2="-1.905" width="0.254" layer="94"/>
+<pin name="+3V3" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/>
+<text x="-2.54" y="-5.08" size="1.778" layer="96" rot="R90">>VALUE</text>
+</symbol>
+<symbol name="SUPPLY1_+5V">
+<wire x1="1.27" y1="-1.905" x2="0" y2="0" width="0.254" layer="94"/>
+<wire x1="0" y1="0" x2="-1.27" y2="-1.905" width="0.254" layer="94"/>
+<pin name="+5V" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/>
+<text x="-2.54" y="-5.08" size="1.778" layer="96" rot="R90">>VALUE</text>
+</symbol>
+<symbol name="SUPPLY1_GND">
+<wire x1="-1.905" y1="0" x2="1.905" y2="0" width="0.254" layer="94"/>
+<pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
+<text x="-2.54" y="-2.54" size="1.778" layer="96">>VALUE</text>
+</symbol>
+<symbol name="SUPPLY1_V+">
+<wire x1="0.889" y1="-1.27" x2="0" y2="0.127" width="0.254" layer="94"/>
+<wire x1="0" y1="0.127" x2="-0.889" y2="-1.27" width="0.254" layer="94"/>
+<wire x1="-0.889" y1="-1.27" x2="0.889" y2="-1.27" width="0.254" layer="94"/>
+<pin name="V+" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/>
+<text x="-2.54" y="-2.54" size="1.778" layer="96" rot="R90">>VALUE</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="SPARKFUN-CONNECTORS_CONN_02" prefix="J" uservalue="yes">
+<description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
+
+<p></p>
+<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
+<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
+<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
+<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
+<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
+</ul>
+
+<p></p>
+<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
+</ul>
+
+<p></p>
+<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
+<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
+<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
+<p></p>
+</ul>
+
+<p></p>
+<b>Special notes:</b>
+
+ Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
+
+2.54_SCREWTERM for use with PRT-10571.<br><br>
+
+3.5mm Screw Terminal footprints for PRT-08084<br><br>
+
+5mm Screw Terminal footprints for use with PRT-08432</description>
+<gates>
+<gate name="G$1" symbol="SPARKFUN-CONNECTORS_CONN_02" x="-2.54" y="0"/>
+</gates>
+<devices>
+<device name="" package="SPARKFUN-CONNECTORS_1X02">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-JST-2-PTH-NO_SILK" package="SPARKFUN-CONNECTORS_JST-2-PTH-NS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-JST-2MM-SMT" package="SPARKFUN-CONNECTORS_JST-2-SMD">
+<connects>
+<connect gate="G$1" pin="1" pad="2"/>
+<connect gate="G$1" pin="2" pad="1"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-11443"/>
+</technology>
+</technologies>
+</device>
+<device name="1X02_NO_SILK" package="SPARKFUN-CONNECTORS_1X02_NO_SILK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="2.54MM_SCREWTERM" package="SPARKFUN-CONNECTORS_1X02_2.54_SCREWTERM">
+<connects>
+<connect gate="G$1" pin="1" pad="P1"/>
+<connect gate="G$1" pin="2" pad="P2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="3.5MM" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08399" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="3.5MM-NO_SILK" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-2-NS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08399" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="3.5MM_LOCK" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-2_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08399" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="4UCON-15767" package="SPARKFUN-CONNECTORS_JST-2-SMD-VERT">
+<connects>
+<connect gate="G$1" pin="1" pad="GND"/>
+<connect gate="G$1" pin="2" pad="VCC"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="5MM" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-5MM-2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="SF_SKU" value="PRT-08432" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="JST-PTH-2" package="SPARKFUN-CONNECTORS_JST-2-PTH">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09863" constant="no"/>
+<attribute name="SKU" value="PRT-09914" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="JST-PTH-2-KIT" package="SPARKFUN-CONNECTORS_JST-2-PTH-KIT">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK" package="SPARKFUN-CONNECTORS_1X02_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK_LONGPADS" package="SPARKFUN-CONNECTORS_1X02_LOCK_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POGO_PIN_HOLES_ONLY" package="SPARKFUN-CONNECTORS_1X02_PP_HOLES_ONLY">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="POLAR" package="SPARKFUN-CONNECTORS_MOLEX-1X2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="SF_ID" value="PRT-09918" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="POLAR_LOCK" package="SPARKFUN-CONNECTORS_MOLEX-1X2_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="SF_ID" value="PRT-09918" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="PTH2" package="SPARKFUN-CONNECTORS_1X02_BIG">
+<connects>
+<connect gate="G$1" pin="1" pad="P$1"/>
+<connect gate="G$1" pin="2" pad="P$2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH3" package="SPARKFUN-CONNECTORS_1X02_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH4" package="SPARKFUN-CONNECTORS_1X02_XTRA_BIG">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH_RA_FEMALE" package="SPARKFUN-CONNECTORS_1X02_RA_PTH_FEMALE">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-13700"/>
+</technology>
+</technologies>
+</device>
+<device name="SMALL_POKEHOME" package="SPARKFUN-CONNECTORS_1X02_POKEHOME">
+<connects>
+<connect gate="G$1" pin="1" pad="P1 P3"/>
+<connect gate="G$1" pin="2" pad="P2 P4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-13512"/>
+</technology>
+</technologies>
+</device>
+<device name="SPRING-2.54-RA" package="SPARKFUN-CONNECTORS_SPRINGTERMINAL-2.54MM-2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SPARKFUN-CONNECTORS_CONN_04" prefix="J" uservalue="yes">
+<description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
+
+<p></p>
+<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
+<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
+<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
+<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
+<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
+</ul>
+
+<p></p>
+<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
+</ul>
+
+<p></p>
+<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
+<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
+<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
+<p></p>
+</ul>
+
+<p></p>
+<b>Special notes:</b>
+<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208</description>
+<gates>
+<gate name="G$1" symbol="SPARKFUN-CONNECTORS_CONN_04" x="-2.54" y="0"/>
+</gates>
+<devices>
+<device name="" package="SPARKFUN-CONNECTORS_1X04">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="1.27MM" package="SPARKFUN-CONNECTORS_1X04_1.27MM">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="1X04_NO_SILK" package="SPARKFUN-CONNECTORS_1X04_NO_SILK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="JST-PTH" package="SPARKFUN-CONNECTORS_JST-4-PTH">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="WIRE-13531" constant="no"/>
+<attribute name="SF_ID" value="PRT-09916" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="JST-PTH-VERT" package="SPARKFUN-CONNECTORS_JST-4-PTH-VERT">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-13251"/>
+</technology>
+</technologies>
+</device>
+<device name="LOCK" package="SPARKFUN-CONNECTORS_1X04_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="LOCK_LONGPADS" package="SPARKFUN-CONNECTORS_1X04_LOCK_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="LONGPADS" package="SPARKFUN-CONNECTORS_1X04_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09696" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="POLAR" package="SPARKFUN-CONNECTORS_MOLEX-1X4">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08186" constant="no"/>
+<attribute name="SF_ID" value="PRT-08231" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="POLAR_LOCK" package="SPARKFUN-CONNECTORS_MOLEX-1X4_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08186" constant="no"/>
+<attribute name="SF_ID" value="PRT-08231" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SCREW" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-4">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="2xCONN-08399" constant="no"/>
+<attribute name="SF_ID" value="2xPRT-08084" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SCREW_LOCK" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-4_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SMD" package="SPARKFUN-CONNECTORS_1X04_SMD_RA_MALE">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09140" constant="no"/>
+<attribute name="SF_ID" value="PRT-12638" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SMD2" package="SPARKFUN-CONNECTORS_1X04_1MM_RA">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-10310" constant="no"/>
+<attribute name="SF_ID" value="PRT-10208" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SMD_LONG" package="SPARKFUN-CONNECTORS_1X04_SMD_LONG">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-09140" constant="no"/>
+<attribute name="SF_ID" value="PRT-12638" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SMD_RA_FEMALE" package="SPARKFUN-CONNECTORS_1X04_SMD_RA_FEMALE">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-12382" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SMD_STRAIGHT_COMBO" package="SPARKFUN-CONNECTORS_1X04_SMD_VERTICAL_COMBO">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08511"/>
+<attribute name="VALUE" value="1X04_SMD_STRAIGHT_COMBO"/>
+</technology>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SPARKFUN-CONNECTORS_CONN_05" prefix="J" uservalue="yes">
+<description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
+
+<p></p>
+<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
+<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
+<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
+<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
+<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
+</ul>
+
+<p></p>
+<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
+</ul>
+
+<p></p>
+<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
+<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
+<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
+<p></p>
+</ul>
+
+<p></p>
+<b>Special notes:</b>
+<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208</description>
+<gates>
+<gate name="G$1" symbol="SPARKFUN-CONNECTORS_CONN_05" x="-2.54" y="0"/>
+</gates>
+<devices>
+<device name="" package="SPARKFUN-CONNECTORS_1X05">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="1.27MM" package="SPARKFUN-CONNECTORS_1X05_1.27MM">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="JST" package="SPARKFUN-CONNECTORS_JST-5-PTH">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="SF_ID" value="PRT-09917" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="JST-VERT" package="SPARKFUN-CONNECTORS_JST-5-PTH-VERT">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK" package="SPARKFUN-CONNECTORS_1X05_LOCK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="LOCK_LONGPADS" package="SPARKFUN-CONNECTORS_1X05_LOCK_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="NO_SILK" package="SPARKFUN-CONNECTORS_1X05_NO_SILK">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PTH_LONGPADS" package="SPARKFUN-CONNECTORS_1X05_LONGPADS">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SCREW" package="SPARKFUN-CONNECTORS_SCREWTERMINAL-3.5MM-5">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="Combine 8288+8399" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SMD" package="SPARKFUN-CONNECTORS_1X05_1MM">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-08528" constant="no"/>
+<attribute name="SF_ID" value="GPS-08288" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="SMD2" package="SPARKFUN-CONNECTORS_1X05_1MM_RA">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+<connect gate="G$1" pin="5" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="BORKEDLABS-PASSIVES_CAP" prefix="C" uservalue="yes">
+<description><b>Capacitor</b>
+Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.</description>
+<gates>
+<gate name="G$1" symbol="BORKEDLABS-PASSIVES_CAP" x="0" y="0"/>
+</gates>
+<devices>
+<device name="0402-CAP" package="BORKEDLABS-PASSIVES_0402-CAP">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="0402"/>
+<attribute name="TYPE" value="" constant="no"/>
+<attribute name="VOLTAGE" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="0603-CAP" package="BORKEDLABS-PASSIVES_0603-CAP">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="0603"/>
+<attribute name="TYPE" value="" constant="no"/>
+<attribute name="VOLTAGE" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="0805" package="BORKEDLABS-PASSIVES_0805">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="0805"/>
+<attribute name="TYPE" value="" constant="no"/>
+<attribute name="VOLTAGE" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="1206" package="BORKEDLABS-PASSIVES_1206">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="1206" constant="no"/>
+<attribute name="TYPE" value="" constant="no"/>
+<attribute name="VOLTAGE" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="1210" package="BORKEDLABS-PASSIVES_1210">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="1210" constant="no"/>
+<attribute name="TYPE" value="" constant="no"/>
+<attribute name="VOLTAGE" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="BORKEDLABS-PASSIVES_RESISTOR" prefix="R" uservalue="yes">
+<description><b>Resistor</b>
+Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</description>
+<gates>
+<gate name="G$1" symbol="BORKEDLABS-PASSIVES_RESISTOR" x="0" y="0"/>
+</gates>
+<devices>
+<device name="0402-RES" package="BORKEDLABS-PASSIVES_0402-RES">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="0402"/>
+<attribute name="PRECISION" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="0603-RES" package="BORKEDLABS-PASSIVES_0603-RES">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="0603"/>
+<attribute name="PRECISION" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="0805-RES" package="BORKEDLABS-PASSIVES_0805">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="0805"/>
+<attribute name="PRECISION" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="1206" package="BORKEDLABS-PASSIVES_1206">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="1206" constant="no"/>
+<attribute name="PRECISION" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="2010" package="BORKEDLABS-PASSIVES_R2010">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="2010"/>
+<attribute name="PRECISION" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="2512" package="BORKEDLABS-PASSIVES_R2512">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PACKAGE" value="2512"/>
+<attribute name="PRECISION" value="" constant="no"/>
+</technology>
+</technologies>
+</device>
+<device name="TO220ACS" package="BORKEDLABS-PASSIVES_TO220ACS">
+<connects>
+<connect gate="G$1" pin="1" pad="A"/>
+<connect gate="G$1" pin="2" pad="C"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="COMM_RS485-2BY2-SN75C1168PWR" prefix="U">
+<gates>
+<gate name="G$1" symbol="COMM_RS485-2BY2-SN75C1168PWR" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="COMM_TSSOP16">
+<connects>
+<connect gate="G$1" pin="1A" pad="2"/>
+<connect gate="G$1" pin="1B" pad="1"/>
+<connect gate="G$1" pin="1D" pad="15"/>
+<connect gate="G$1" pin="1DE" pad="4"/>
+<connect gate="G$1" pin="1R" pad="3"/>
+<connect gate="G$1" pin="1Y" pad="14"/>
+<connect gate="G$1" pin="1Z" pad="13"/>
+<connect gate="G$1" pin="2A" pad="6"/>
+<connect gate="G$1" pin="2B" pad="7"/>
+<connect gate="G$1" pin="2D" pad="9"/>
+<connect gate="G$1" pin="2DE" pad="12"/>
+<connect gate="G$1" pin="2R" pad="5"/>
+<connect gate="G$1" pin="2Y" pad="10"/>
+<connect gate="G$1" pin="2Z" pad="11"/>
+<connect gate="G$1" pin="GND" pad="8"/>
+<connect gate="G$1" pin="VCC" pad="16"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="CONNECTOR_ATK-RS48PHYVE" prefix="J">
+<gates>
+<gate name="G$1" symbol="CONNECTOR_ATK-RS48PHYVE" x="0" y="0"/>
+</gates>
+<devices>
+<device name="RJ45LED" package="CONNECTOR_RJ45-LED-RJE7318800XXX">
+<connects>
+<connect gate="G$1" pin="3V3-LED" pad="GRNP YLWP"/>
+<connect gate="G$1" pin="CLKRX-A" pad="P$8"/>
+<connect gate="G$1" pin="CLKRX-B" pad="P$7"/>
+<connect gate="G$1" pin="CLKRX-Y" pad="P$1"/>
+<connect gate="G$1" pin="CLKTX-Z" pad="P$2"/>
+<connect gate="G$1" pin="LED-GRN-CATHODE" pad="GRNN"/>
+<connect gate="G$1" pin="LED-YLW-CATHODE" pad="YLWN"/>
+<connect gate="G$1" pin="RX-A" pad="P$3"/>
+<connect gate="G$1" pin="RX-B" pad="P$4"/>
+<connect gate="G$1" pin="TX-Y" pad="P$6"/>
+<connect gate="G$1" pin="TX-Z" pad="P$5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="CONNECTOR_FIDUCIAL">
+<description>For use by pick and place machines to calibrate the vision/machine, 1mm
+<p>By microbuilder.eu</p></description>
+<gates>
+<gate name="G$1" symbol="CONNECTOR_DOT" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="CONNECTOR_FIDUCIAL_1MM">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="CONNECTOR_JRTOMBSTONE" prefix="MP">
+<gates>
+<gate name="G$1" symbol="CONNECTOR_JRTOMBSTONE" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="CONNECTOR_JRTOMBSTONE">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="FAB_2-8X4-5_SWITCH" prefix="S">
+<gates>
+<gate name="G$1" symbol="FAB_TS2" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="FAB_TACT-SWITCH-KMR6">
+<connects>
+<connect gate="G$1" pin="P" pad="P$1"/>
+<connect gate="G$1" pin="P1" pad="P$2"/>
+<connect gate="G$1" pin="S" pad="P$3"/>
+<connect gate="G$1" pin="S1" pad="P$4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="LIGHTS_LED" prefix="D">
+<description>LED</description>
+<gates>
+<gate name="G$1" symbol="LIGHTS_LED" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="LIGHTS_LED1206">
+<connects>
+<connect gate="G$1" pin="A" pad="1"/>
+<connect gate="G$1" pin="C" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="5MM" package="LIGHTS_5MM">
+<connects>
+<connect gate="G$1" pin="A" pad="IN"/>
+<connect gate="G$1" pin="C" pad="OUT"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="0805" package="LIGHTS_LED0805">
+<connects>
+<connect gate="G$1" pin="A" pad="1"/>
+<connect gate="G$1" pin="C" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="FAB1206" package="LIGHTS_LED1206FAB">
+<connects>
+<connect gate="G$1" pin="A" pad="1"/>
+<connect gate="G$1" pin="C" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="MICROCONTROLLERS_ATXMEGA_A3U" prefix="U">
+<gates>
+<gate name="G$1" symbol="MICROCONTROLLERS_ATXMEGA_A3U" x="0" y="0"/>
+</gates>
+<devices>
+<device name="QFN" package="MICROCONTROLLERS_QFN-64-9X9MM">
+<connects>
+<connect gate="G$1" pin="AVCC" pad="61"/>
+<connect gate="G$1" pin="GND" pad="14 24 34 44 52 60 P$1"/>
+<connect gate="G$1" pin="PA0/AREF" pad="62"/>
+<connect gate="G$1" pin="PA1" pad="63"/>
+<connect gate="G$1" pin="PA2" pad="64"/>
+<connect gate="G$1" pin="PA3" pad="1"/>
+<connect gate="G$1" pin="PA4" pad="2"/>
+<connect gate="G$1" pin="PA5" pad="3"/>
+<connect gate="G$1" pin="PA6" pad="4"/>
+<connect gate="G$1" pin="PA7" pad="5"/>
+<connect gate="G$1" pin="PB0/AREF" pad="6"/>
+<connect gate="G$1" pin="PB1" pad="7"/>
+<connect gate="G$1" pin="PB2/DAC0" pad="8"/>
+<connect gate="G$1" pin="PB3/DAC1" pad="9"/>
+<connect gate="G$1" pin="PB4" pad="10"/>
+<connect gate="G$1" pin="PB5" pad="11"/>
+<connect gate="G$1" pin="PB6" pad="12"/>
+<connect gate="G$1" pin="PB7" pad="13"/>
+<connect gate="G$1" pin="PC0/SDA" pad="16"/>
+<connect gate="G$1" pin="PC1/SCL/XCK0" pad="17"/>
+<connect gate="G$1" pin="PC2/RXD0" pad="18"/>
+<connect gate="G$1" pin="PC3/TXD0" pad="19"/>
+<connect gate="G$1" pin="PC4/SS" pad="20"/>
+<connect gate="G$1" pin="PC5/XCK1/MOSI" pad="21"/>
+<connect gate="G$1" pin="PC6/RXD1/MISO" pad="22"/>
+<connect gate="G$1" pin="PC7/TXD1/SCK" pad="23"/>
+<connect gate="G$1" pin="PD0" pad="26"/>
+<connect gate="G$1" pin="PD1/XCK0" pad="27"/>
+<connect gate="G$1" pin="PD2/RXD0" pad="28"/>
+<connect gate="G$1" pin="PD3/TXD0" pad="29"/>
+<connect gate="G$1" pin="PD4/SS" pad="30"/>
+<connect gate="G$1" pin="PD5/XCK/MOSI" pad="31"/>
+<connect gate="G$1" pin="PD6/RXD1/MISO/D-" pad="32"/>
+<connect gate="G$1" pin="PD7/TXD1/SCK/D+" pad="33"/>
+<connect gate="G$1" pin="PDI_DATA" pad="56"/>
+<connect gate="G$1" pin="PE0/SDA" pad="36"/>
+<connect gate="G$1" pin="PE1/SCL/XCK0" pad="37"/>
+<connect gate="G$1" pin="PE2/RXD0" pad="38"/>
+<connect gate="G$1" pin="PE3/TXD0" pad="39"/>
+<connect gate="G$1" pin="PE4/SS" pad="40"/>
+<connect gate="G$1" pin="PE5/XCK1/MOSI" pad="41"/>
+<connect gate="G$1" pin="PE6/RXD1/MISO" pad="42"/>
+<connect gate="G$1" pin="PE7/TXD1/SCK" pad="43"/>
+<connect gate="G$1" pin="PF0" pad="46"/>
+<connect gate="G$1" pin="PF1/XCK0" pad="47"/>
+<connect gate="G$1" pin="PF2/RXD0" pad="48"/>
+<connect gate="G$1" pin="PF3/TXD0" pad="49"/>
+<connect gate="G$1" pin="PF4" pad="50"/>
+<connect gate="G$1" pin="PF5" pad="51"/>
+<connect gate="G$1" pin="PF6" pad="54"/>
+<connect gate="G$1" pin="PF7" pad="55"/>
+<connect gate="G$1" pin="PR0/XTAL2" pad="58"/>
+<connect gate="G$1" pin="PR1/XTAL1" pad="59"/>
+<connect gate="G$1" pin="RESET/PDI_CLK" pad="57"/>
+<connect gate="G$1" pin="VCC" pad="15 25 35 45 53"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="TQFP" package="MICROCONTROLLERS_TQFP64_14X14MM-013THIN">
+<connects>
+<connect gate="G$1" pin="AVCC" pad="61"/>
+<connect gate="G$1" pin="GND" pad="14 24 34 44 52 60"/>
+<connect gate="G$1" pin="PA0/AREF" pad="62"/>
+<connect gate="G$1" pin="PA1" pad="63"/>
+<connect gate="G$1" pin="PA2" pad="64"/>
+<connect gate="G$1" pin="PA3" pad="1"/>
+<connect gate="G$1" pin="PA4" pad="2"/>
+<connect gate="G$1" pin="PA5" pad="3"/>
+<connect gate="G$1" pin="PA6" pad="4"/>
+<connect gate="G$1" pin="PA7" pad="5"/>
+<connect gate="G$1" pin="PB0/AREF" pad="6"/>
+<connect gate="G$1" pin="PB1" pad="7"/>
+<connect gate="G$1" pin="PB2/DAC0" pad="8"/>
+<connect gate="G$1" pin="PB3/DAC1" pad="9"/>
+<connect gate="G$1" pin="PB4" pad="10"/>
+<connect gate="G$1" pin="PB5" pad="11"/>
+<connect gate="G$1" pin="PB6" pad="12"/>
+<connect gate="G$1" pin="PB7" pad="13"/>
+<connect gate="G$1" pin="PC0/SDA" pad="16"/>
+<connect gate="G$1" pin="PC1/SCL/XCK0" pad="17"/>
+<connect gate="G$1" pin="PC2/RXD0" pad="18"/>
+<connect gate="G$1" pin="PC3/TXD0" pad="19"/>
+<connect gate="G$1" pin="PC4/SS" pad="20"/>
+<connect gate="G$1" pin="PC5/XCK1/MOSI" pad="21"/>
+<connect gate="G$1" pin="PC6/RXD1/MISO" pad="22"/>
+<connect gate="G$1" pin="PC7/TXD1/SCK" pad="23"/>
+<connect gate="G$1" pin="PD0" pad="26"/>
+<connect gate="G$1" pin="PD1/XCK0" pad="27"/>
+<connect gate="G$1" pin="PD2/RXD0" pad="28"/>
+<connect gate="G$1" pin="PD3/TXD0" pad="29"/>
+<connect gate="G$1" pin="PD4/SS" pad="30"/>
+<connect gate="G$1" pin="PD5/XCK/MOSI" pad="31"/>
+<connect gate="G$1" pin="PD6/RXD1/MISO/D-" pad="32"/>
+<connect gate="G$1" pin="PD7/TXD1/SCK/D+" pad="33"/>
+<connect gate="G$1" pin="PDI_DATA" pad="56"/>
+<connect gate="G$1" pin="PE0/SDA" pad="36"/>
+<connect gate="G$1" pin="PE1/SCL/XCK0" pad="37"/>
+<connect gate="G$1" pin="PE2/RXD0" pad="38"/>
+<connect gate="G$1" pin="PE3/TXD0" pad="39"/>
+<connect gate="G$1" pin="PE4/SS" pad="40"/>
+<connect gate="G$1" pin="PE5/XCK1/MOSI" pad="41"/>
+<connect gate="G$1" pin="PE6/RXD1/MISO" pad="42"/>
+<connect gate="G$1" pin="PE7/TXD1/SCK" pad="43"/>
+<connect gate="G$1" pin="PF0" pad="46"/>
+<connect gate="G$1" pin="PF1/XCK0" pad="47"/>
+<connect gate="G$1" pin="PF2/RXD0" pad="48"/>
+<connect gate="G$1" pin="PF3/TXD0" pad="49"/>
+<connect gate="G$1" pin="PF4" pad="50"/>
+<connect gate="G$1" pin="PF5" pad="51"/>
+<connect gate="G$1" pin="PF6" pad="54"/>
+<connect gate="G$1" pin="PF7" pad="55"/>
+<connect gate="G$1" pin="PR0/XTAL2" pad="58"/>
+<connect gate="G$1" pin="PR1/XTAL1" pad="59"/>
+<connect gate="G$1" pin="RESET/PDI_CLK" pad="57"/>
+<connect gate="G$1" pin="VCC" pad="15 25 35 45 53"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="MICROCONTROLLERS_PDI" prefix="J" uservalue="yes">
+<description><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
+
+<p></p>
+
+<p></p>
+<b>You can populate with any combo of single row headers, but if you'd like an exact match, check these:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/12807"> Header - 2x3 (Male, 0.1")</a> (PRT-12807)</li>
+<li><a href="https://www.sparkfun.com/products/13010"> Header - 2x3 (Female, 0.1")</a> (PRT-13010)</li>
+<li><a href="https://www.sparkfun.com/products/10877"> 2x3 Pin Shrouded Header</a> (PRT-10877)</li>
+</ul>
+
+<p></p>
+<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
+<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
+<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
+<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
+<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
+</ul>
+
+<p></p>
+<b>Special note: the shrouded connector mates well with our 3x2 ribbon cables:</b>
+<ul>
+<li><a href="https://www.sparkfun.com/products/10651"> Ribbon Crimp Connector - 6-pin (2x3, Female)</a> (PRT-10651)</li>
+<li><a href="https://www.sparkfun.com/products/10646"> Ribbon Cable - 6 wire (15ft)</a> (PRT-10646)</li>
+</ul></description>
+<gates>
+<gate name="G$1" symbol="MICROCONTROLLERS_PDI" x="0" y="0"/>
+</gates>
+<devices>
+<device name="FEMALE_SMD" package="MICROCONTROLLERS_PDI_2X3_SMD">
+<connects>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="NC1" pad="3"/>
+<connect gate="G$1" pin="NC2" pad="4"/>
+<connect gate="G$1" pin="PDI_CLK" pad="5"/>
+<connect gate="G$1" pin="PDI_DATA" pad="1"/>
+<connect gate="G$1" pin="VCC" pad="2"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="PROD_ID" value="CONN-11290"/>
+</technology>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="PASSIVES_RESONATOR" prefix="Y">
+<gates>
+<gate name="G$1" symbol="PASSIVES_CERAMIC_RESONATOR" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="PASSIVES_RES_EFOBM">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PQRC" package="PASSIVES_RES_PRQC">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="POWER_PNPAIR-STL40C30H3LL-FDD8424H" prefix="Q">
+<gates>
+<gate name="G$1" symbol="POWER_PNPAIR" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="POWER_DPAK-5">
+<connects>
+<connect gate="G$1" pin="DN/DP" pad="3"/>
+<connect gate="G$1" pin="GN" pad="2"/>
+<connect gate="G$1" pin="GP" pad="5"/>
+<connect gate="G$1" pin="SN" pad="1"/>
+<connect gate="G$1" pin="SP" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="STM" package="POWER_POWERFLAT-5X6">
+<connects>
+<connect gate="G$1" pin="DN/DP" pad="P$5 P$8"/>
+<connect gate="G$1" pin="GN" pad="P$2"/>
+<connect gate="G$1" pin="GP" pad="P$4"/>
+<connect gate="G$1" pin="SN" pad="P$1"/>
+<connect gate="G$1" pin="SP" pad="P$3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="POWER_PWRPAD" prefix="J">
+<gates>
+<gate name="G$1" symbol="POWER_PWRPAD" x="0" y="0"/>
+</gates>
+<devices>
+<device name="4MM" package="POWER_PWRPAD_4MM">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="M2" package="POWER_PWRPAD_2-05MM">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="M2.5" package="POWER_PWRPAD_2-65MM">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="M2.5_STANDOFF" package="POWER_PWRPAD_M25_STANDOFF">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="M3" package="POWER_PWRPAD_3-25MM">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="M3-SKINNY" package="POWER_PWRPAD_3-25MM-SKINNY">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="M3-STANDOFF" package="POWER_PWRPAD_M3_STANDOFF">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="SC-02_2-45MM" package="POWER_PWRPAD_SC-02_2-45MM">
+<connects>
+<connect gate="G$1" pin="PWRPAD" pad="P$1"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="POWER_TMC262" prefix="U">
+<gates>
+<gate name="G$1" symbol="POWER_TMC262" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="POWER_QFN32">
+<connects>
+<connect gate="G$1" pin="5VOUT" pad="9"/>
+<connect gate="G$1" pin="BMA1" pad="5"/>
+<connect gate="G$1" pin="BMA2" pad="4"/>
+<connect gate="G$1" pin="BMB1" pad="20"/>
+<connect gate="G$1" pin="BMB2" pad="21"/>
+<connect gate="G$1" pin="CLK" pad="16"/>
+<connect gate="G$1" pin="CSN" pad="14"/>
+<connect gate="G$1" pin="DIE_PAD" pad="EXP"/>
+<connect gate="G$1" pin="DIR" pad="30"/>
+<connect gate="G$1" pin="ENABLE" pad="15"/>
+<connect gate="G$1" pin="GND@1" pad="1"/>
+<connect gate="G$1" pin="GND@2" pad="13"/>
+<connect gate="G$1" pin="GNDP" pad="28"/>
+<connect gate="G$1" pin="HA1" pad="2"/>
+<connect gate="G$1" pin="HA2" pad="3"/>
+<connect gate="G$1" pin="HB1" pad="23"/>
+<connect gate="G$1" pin="HB2" pad="22"/>
+<connect gate="G$1" pin="LA1" pad="6"/>
+<connect gate="G$1" pin="LA2" pad="7"/>
+<connect gate="G$1" pin="LB1" pad="19"/>
+<connect gate="G$1" pin="LB2" pad="18"/>
+<connect gate="G$1" pin="SCK" pad="12"/>
+<connect gate="G$1" pin="SDI" pad="11"/>
+<connect gate="G$1" pin="SDO" pad="10"/>
+<connect gate="G$1" pin="SG_TST" pad="27"/>
+<connect gate="G$1" pin="SRA" pad="8"/>
+<connect gate="G$1" pin="SRB" pad="17"/>
+<connect gate="G$1" pin="STEP" pad="31"/>
+<connect gate="G$1" pin="TEST_ANA" pad="26"/>
+<connect gate="G$1" pin="TST_MODE" pad="32"/>
+<connect gate="G$1" pin="VCC_IO" pad="29"/>
+<connect gate="G$1" pin="VHS" pad="24"/>
+<connect gate="G$1" pin="VS" pad="25"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="POWER_VREG-AP2112" prefix="U">
+<gates>
+<gate name="G$1" symbol="POWER_VREG-AP2112" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="POWER_SOT23-5">
+<connects>
+<connect gate="G$1" pin="EN" pad="3"/>
+<connect gate="G$1" pin="GND" pad="2"/>
+<connect gate="G$1" pin="VIN" pad="1"/>
+<connect gate="G$1" pin="VOUT" pad="5"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SENSOR_AS5047">
+<gates>
+<gate name="G$1" symbol="SENSOR_AS5047" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="SENSOR_TSSOP14">
+<connects>
+<connect gate="G$1" pin="A" pad="6"/>
+<connect gate="G$1" pin="B" pad="7"/>
+<connect gate="G$1" pin="CLK" pad="2"/>
+<connect gate="G$1" pin="CSN" pad="1"/>
+<connect gate="G$1" pin="GND" pad="13"/>
+<connect gate="G$1" pin="I" pad="14"/>
+<connect gate="G$1" pin="MISO" pad="3"/>
+<connect gate="G$1" pin="MOSI" pad="4"/>
+<connect gate="G$1" pin="TEST" pad="5"/>
+<connect gate="G$1" pin="U" pad="10"/>
+<connect gate="G$1" pin="V" pad="9"/>
+<connect gate="G$1" pin="VDD" pad="11"/>
+<connect gate="G$1" pin="VDD3V" pad="12"/>
+<connect gate="G$1" pin="W" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SENSOR_RTD-NI1000SOT" prefix="U">
+<gates>
+<gate name="G$1" symbol="SENSOR_RTD-NI1000SOT" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="SENSOR_SOT23">
+<connects>
+<connect gate="G$1" pin="SENSE" pad="3"/>
+<connect gate="G$1" pin="TERM1" pad="1"/>
+<connect gate="G$1" pin="TERM2" pad="2"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SUPPLY1_+3V3" prefix="+3V3">
+<description><b>SUPPLY SYMBOL</b></description>
+<gates>
+<gate name="G$1" symbol="SUPPLY1_+3V3" x="0" y="0"/>
+</gates>
+<devices>
+<device name="">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SUPPLY1_+5V" prefix="P+">
+<description><b>SUPPLY SYMBOL</b></description>
+<gates>
+<gate name="1" symbol="SUPPLY1_+5V" x="0" y="0"/>
+</gates>
+<devices>
+<device name="">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SUPPLY1_GND" prefix="GND">
+<description><b>SUPPLY SYMBOL</b></description>
+<gates>
+<gate name="1" symbol="SUPPLY1_GND" x="0" y="0"/>
+</gates>
+<devices>
+<device name="">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+<deviceset name="SUPPLY1_V+" prefix="P+">
+<description><b>SUPPLY SYMBOL</b></description>
+<gates>
+<gate name="1" symbol="SUPPLY1_V+" x="0" y="0"/>
+</gates>
+<devices>
+<device name="">
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+</drawing>
+</eagle>
diff --git a/circuit/atkstepper23/atkstepper23.sch b/circuit/atkstepper23/atkstepper23.sch
index d3a1f88480f4e4a079d0f47d834b0c2b9d613cf1..3629650bf9548e0d30756d5f5ff7084fa903c810 100644
--- a/circuit/atkstepper23/atkstepper23.sch
+++ b/circuit/atkstepper23/atkstepper23.sch
@@ -5245,8 +5245,8 @@ thin small outline package</description>
<instance part="C7" gate="G$1" x="335.28" y="205.74" rot="R180"/>
<instance part="GND6" gate="1" x="360.68" y="200.66" rot="R90"/>
<instance part="+3V4" gate="G$1" x="360.68" y="208.28" rot="R270"/>
-<instance part="U$1" gate="G$1" x="81.28" y="271.78"/>
-<instance part="U$2" gate="G$1" x="81.28" y="287.02"/>
+<instance part="U$1" gate="G$1" x="-60.96" y="-76.2"/>
+<instance part="U$2" gate="G$1" x="452.12" y="342.9"/>
<instance part="J5" gate="G$1" x="68.58" y="281.94"/>
<instance part="J7" gate="G$1" x="68.58" y="276.86"/>
<instance part="U$3" gate="G$1" x="195.58" y="111.76"/>
@@ -6081,13 +6081,6 @@ thin small outline package</description>
<label x="157.48" y="17.78" size="1.778" layer="95"/>
</segment>
</net>
-<net name="ATK1-CLKIN" class="0">
-<segment>
-<pinref part="U1" gate="G$1" pin="PF2/RXD0"/>
-<wire x1="91.44" y1="119.38" x2="109.22" y2="119.38" width="0.1524" layer="91"/>
-<label x="93.98" y="119.38" size="1.778" layer="95"/>
-</segment>
-</net>
<net name="ATK0-RXLED" class="0">
<segment>
<pinref part="U1" gate="G$1" pin="PE4/SS"/>
diff --git a/circuit/atkstepper23/eagle.epf b/circuit/atkstepper23/eagle.epf
index 6bf18a4551e6f158198bedc9e89a9ad977187baa..7f0c5471021d2b41d6080e8ef662857a7297aa5f 100644
--- a/circuit/atkstepper23/eagle.epf
+++ b/circuit/atkstepper23/eagle.epf
@@ -14,41 +14,25 @@ UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/fab.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/lights.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/microcontrollers.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/motors.lbr"
-UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/passives.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/power.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/sensor.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries_jake/eagle/sparkfun/SparkFun-Connectors.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries_jake/eagle/jake/tag-connect-2050.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/Comparators.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/Digital.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/FilterProducts.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/Misc.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/Opamps.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/Optos.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/PAsystem.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/PowerProducts.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/References.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/SpecialFunctions.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/capmeter.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/diode.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/lt-spice-simulation.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/lt-supply.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/rload.lbr"
-UsedLibrary="C:/EAGLE 8.3.2/lbr/ltspice/sym.lbr"
UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries_jake/eagle/marekr/borkedlabs-passives.lbr"
+UsedLibrary="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/passives.lbr"
[Win_1]
-Type="Library Editor"
-Number=3
-File="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/power.lbr"
-View="-17.9019 -28.255 28.0619 27.747"
-WireWidths=" 0.0762 0.1016 0.15 0.2 0.2032 0.254 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524 0.127"
+Type="Schematic Editor"
+Number=1
+File="atkstepper23.sch"
+View="47.9762 -5.02503 391.126 216.1"
+WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.2032 0.254 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524"
PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6"
ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0"
ViaDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35"
HoleDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35"
-TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778 1.27"
+TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778"
PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27"
PolygonIsolates=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
MiterRadiuss=" 0.254 0.3175 0.635 1.27 2.54 1 2 2.5 5 7.5 10 0"
@@ -56,9 +40,9 @@ DimensionWidths=" 0 0.127 0.254 0.1 0.26 0.13"
DimensionExtWidths=" 0.127 0.254 0.1 0.13 0.26 0"
DimensionExtLengths=" 1.27 2.54 1 2 3 0"
DimensionExtOffsets=" 1.27 2.54 1 2 3 0"
-SmdSizes=" 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635 1 0.65 0.65 1"
-WireBend=0
-WireBendSet=0
+SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635"
+WireBend=4
+WireBendSet=31
WireCap=1
MiterStyle=0
PadShape=0
@@ -79,20 +63,22 @@ SwapLevel=0
ArcDirection=0
AddLevel=2
PadsSameType=0
-Layer=94
+Layer=97
+Views=" 1: 47.9762 -5.02503 391.126 216.1"
+Sheet="1"
[Win_2]
-Type="Board Editor"
-Number=2
-File="atkstepper23.brd"
-View="-8.65115 -11.5972 105.824 68.7511"
-WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.508 1.016 1.27 2.54 0.8128 0.6096 0.4064 0.3048 0.254 0.1524 0.2032"
-PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
-PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6"
-ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0"
-ViaDrills=" 0.2 0.25 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35 0.3"
-HoleDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35"
-TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778"
+Type="Library Editor"
+Number=4
+File="D:/Dropbox (Personal)/CBA/doc/libraries/eagle/power.lbr"
+View="-12.3515 -9.81456 4.74844 11.8466"
+WireWidths=" 0.508 0.4 0.0254 0.001 0.0508 0.09 0.2032 0.125 0.5 0.1016 0.6096 0.4064 0 0.1524 0.254 0.127"
+PadDiameters=" 1 1.4478 1.6 1.8796 2.032 1.9 0 1.4224 3.8 4.65 5.75 5.35 6.35 7 6 4.24"
+PadDrills=" 0.7 1.2 1.3 1.016 0.9 2 1.1 1.8 0.8128 2.05 2.65 3.25 3.9878 4.4 3.7 2.45"
+ViaDiameters=" 1 1.4478 1.6 1.8796 2.032 1.9 0 1.4224 3.8 4.65 5.75 5.35 6.35 7 6 4.24"
+ViaDrills=" 0.7 1.2 1.3 1.016 0.9 2 1.1 1.8 0.8128 2.05 2.65 3.25 3.9878 4.4 3.7 2.45"
+HoleDrills=" 0.7 1.2 1.3 1.016 0.9 2 1.1 1.8 0.8128 2.05 2.65 3.25 3.9878 4.4 3.7 2.45"
+TextSizes=" 0.3048 0.8128 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 0.8 0.6096 0.4064 1.016 1.778 1.27"
PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27"
PolygonIsolates=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
MiterRadiuss=" 0.254 0.3175 0.635 1.27 2.54 1 2 2.5 5 7.5 10 0"
@@ -100,41 +86,41 @@ DimensionWidths=" 0 0.127 0.254 0.1 0.26 0.13"
DimensionExtWidths=" 0.127 0.254 0.1 0.13 0.26 0"
DimensionExtLengths=" 1.27 2.54 1 2 3 0"
DimensionExtOffsets=" 1.27 2.54 1 2 3 0"
-SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635"
-WireBend=1
+SmdSizes=" 0.275 0.7 7.6 7.6 1.524 0.3302 3.9 0.8 1.5 0.4 1.5 0.6 6.4 5.8 2.2 0.8 0.65 1 2.5 4.35 0.6 0.25 0.55 0.25 3.2 3.2 0.5334 1.1938 0.762 1.016 0.3048 0.9906"
+WireBend=2
WireBendSet=0
WireCap=1
-MiterStyle=0
-PadShape=0
+MiterStyle=1
+PadShape=1
ViaShape=1
PolygonPour=0
-PolygonRank=1
+PolygonRank=0
PolygonThermals=1
PolygonOrphans=0
TextRatio=8
DimensionUnit=1
DimensionPrecision=2
DimensionShowUnit=0
-PinDirection=3
+PinDirection=8
PinFunction=0
-PinLength=2
-PinVisible=3
+PinLength=1
+PinVisible=0
SwapLevel=0
ArcDirection=0
AddLevel=2
PadsSameType=0
-Layer=47
+Layer=94
[Win_3]
-Type="Schematic Editor"
-Number=1
-File="atkstepper23.sch"
-View="-284.734 -110.324 426.826 348.2"
-WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.2032 0.254 0.3048 0.4064 0.508 0.6096 0.8128 1.016 1.27 2.54 0.1524"
+Type="Board Editor"
+Number=2
+File="atkstepper23.brd"
+View="0.0981375 -0.371244 95.4945 66.585"
+WireWidths=" 0.0762 0.1016 0.127 0.15 0.2 0.508 1.016 1.27 2.54 0.8128 0.6096 0.4064 0.3048 0.254 0.1524 0.2032"
PadDiameters=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 6.4516 0"
PadDrills=" 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.65 0.7 0.75 0.8 0.85 0.9 1 0.6"
ViaDiameters=" 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 0.95 1 1.05 1.1 1.15 1.2 1.3 0"
-ViaDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35"
+ViaDrills=" 0.2 0.25 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35 0.3"
HoleDrills=" 0.2 0.25 0.3 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.8 0.85 0.9 1 0.35"
TextSizes=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.27 1.4224 1.6764 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.778"
PolygonSpacings=" 0.254 0.3048 0.4064 0.6096 0.8128 1.016 1.4224 1.6764 1.778 1.9304 2.1844 2.54 3.81 5.08 6.4516 1.27"
@@ -145,14 +131,14 @@ DimensionExtWidths=" 0.127 0.254 0.1 0.13 0.26 0"
DimensionExtLengths=" 1.27 2.54 1 2 3 0"
DimensionExtOffsets=" 1.27 2.54 1 2 3 0"
SmdSizes=" 0.3048 0.1524 0.4064 0.2032 0.6096 0.3048 0.8128 0.4064 1.016 0.508 1.27 0.6604 1.4224 0.7112 1.6764 0.8128 1.778 0.9144 1.9304 0.9652 2.1844 1.0668 2.54 1.27 3.81 1.9304 5.08 2.54 6.4516 3.2512 1.27 0.635"
-WireBend=4
-WireBendSet=31
+WireBend=1
+WireBendSet=0
WireCap=1
MiterStyle=0
PadShape=0
ViaShape=1
PolygonPour=0
-PolygonRank=0
+PolygonRank=1
PolygonThermals=1
PolygonOrphans=0
TextRatio=8
@@ -167,9 +153,7 @@ SwapLevel=0
ArcDirection=0
AddLevel=2
PadsSameType=0
-Layer=97
-Views=" 1: -284.734 -110.324 426.826 348.2"
-Sheet="1"
+Layer=47
[Win_4]
Type="Control Panel"
diff --git a/embedded/atkstepper23/atkstepper23/main.c b/embedded/atkstepper23/atkstepper23/main.c
index cf19332b78d02d7c9cfe076ba5ea374db194079c..d63c281e324f299987d1e651d89466e49e2f7a43 100644
--- a/embedded/atkstepper23/atkstepper23/main.c
+++ b/embedded/atkstepper23/atkstepper23/main.c
@@ -39,21 +39,11 @@ void uarts_init(void){
//PORTE.PIN7CTRL = PORT_SRLEN_bm;
uart_start(&up0, SYSTEM_BAUDA, SYSTEM_BAUDB);
- // UP1
- rb_init(&up1rbrx);
- rb_init(&up1rbtx);
- pin_init(&up1rxled, &PORTE, PIN0_bm, 0, 1);
- pin_init(&up1txled, &PORTE, PIN1_bm, 1, 1);
- uart_init(&up1, &USARTE0, &PORTE, PIN2_bm, PIN3_bm, &up1rbrx, &up1rbtx, &up1rxled, &up1txled);
- uart_start(&up1, SYSTEM_BAUDA, SYSTEM_BAUDB);
-
ups[0] = &up0;
- ups[1] = &up1;
}
void atkps_init(void){
atkport_init(&atkp0, 0, &up0);
- atkport_init(&atkp1, 1, &up1);
}
void stephardware_init(void){
@@ -124,7 +114,6 @@ int main(void)
while (1)
{
atkport_scan(&atkp0, 2);
- atkport_scan(&atkp1, 2);
// just... as fast as we can
tck++;
// this modulo op is slow AF
diff --git a/images/routed.png b/images/routed.png
index a78fc6b836cafc33c57d62f8b2d33024e8111206..558317ea615f4cdb7f90bb866bf0e675f2d36508 100644
Binary files a/images/routed.png and b/images/routed.png differ
diff --git a/images/schematic.png b/images/schematic.png
index 93186e2e2c2a9614702afcac2d0b66084606480c..f8b996a62b3e7e665e478ded0741a034ca9cebdd 100644
Binary files a/images/schematic.png and b/images/schematic.png differ